Subaru AWD and VDC/ABS stability systems
StandardVerify exact brake, steering-angle, and VDC procedures by VIN before module replacement.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065Covers model years 2015-2019 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Subaru Outback built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
The ADAS, module, and security rows below are consolidated across the full 2015-2019 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2015-2019”.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2015 Subaru Outback. On this vehicle we cover documented systems include Forward Camera (Stereo), Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Adaptive Cruise Control (ACC), this Outback BS fifth generation (2015-2019); verify exact build by VIN platform vehicle, Subaru Immobilizer immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Verify exact brake, steering-angle, and VDC procedures by VIN before module replacement.
Verify the option package and follow the matching model-year Subaru calibration procedure.
Verify platform code and part-number fitment by VIN before cross-referencing modules.
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Subaru SSM4
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
This platform uses Subaru CAN bus architecture; OBD2 DLC ISO 15765-4 CAN with ISO 15765-4 CAN (500 kbps).
This page consolidates Subaru Outback service data for 2015-2019 across 5 model years; 5 years have merged CCT data.
Choose a yearMerged ADAS coverage includes 24 system records, including Forward Camera (Stereo) (2015), Lane Keep Assist / Lane Departure Warning (LKA/LDW), Adaptive Cruise Control (ACC), and Automatic Emergency Braking (AEB). Year-marked systems apply only to the shown range.
View ADAS dataThis generation has 3 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersThe merged generation page indexes 23 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway, immobilizer, and key-security coverage includes 3 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Subaru Outback 2015-2019 span, with exact-year validation before service.
Get a quoterequired if equipped
Verify EyeSight equipment by VIN. Follow the exact model-year Subaru service procedure for camera calibration after windshield, camera, bracket, alignment, or structural work.
conditional
Inspect mounts, wiring, and sensor position before calibration or initialization. Use SSM4/Subaru service information for the VIN's actual equipment rather than later-generation procedures.
conditional
Inspect mounts, wiring, and sensor position before calibration or initialization. Use SSM4/Subaru service information for the VIN's actual equipment rather than later-generation procedures.
conditional
Inspect mounts, wiring, and sensor position before calibration or initialization. Use SSM4/Subaru service information for the VIN's actual equipment rather than later-generation procedures.
conditional
Inspect mounts, wiring, and sensor position before calibration or initialization. Use SSM4/Subaru service information for the VIN's actual equipment rather than later-generation procedures.
required
Verify VIN-specific module variant, perform required programming or registration, complete immobilizer/key relearn where applicable, and clear DTCs before return to service.
required
Verify VIN-specific module variant, perform required programming or registration, complete immobilizer/key relearn where applicable, and clear DTCs before return to service.
required
Verify VIN-specific module variant, perform required programming or registration, complete immobilizer/key relearn where applicable, and clear DTCs before return to service.
required
Verify VIN-specific module variant, perform required programming or registration, complete immobilizer/key relearn where applicable, and clear DTCs before return to service.
required
Verify VIN-specific module variant, perform required programming or registration, complete immobilizer/key relearn where applicable, and clear DTCs before return to service.
| Year | VIN split | Trim notes |
|---|---|---|
| 2015 | VIN pos 4-8 identifies model/body/engine. Subaru WMI: 4S3, JF1, JF2. Position 4-5 = model. Position 10 = model year code. | Trims: Base, Premium, Limited, Touring, Onyx. EyeSight standard all trims (2020+). |
| 2016 | VIN pos 4-8 identifies model/body/engine. Subaru WMI: 4S3, JF1, JF2. Position 4-5 = model. Position 10 = model year code. | Trims: Base, Premium, Limited, Touring, Onyx. EyeSight standard all trims (2020+). |
| 2017 | VIN pos 4-8 identifies model/body/engine. Subaru WMI: 4S3, JF1, JF2. Position 4-5 = model. Position 10 = model year code. | Trims: Base, Premium, Limited, Touring, Onyx. EyeSight standard all trims (2020+). |
| 2018 | VIN pos 4-8 identifies model/body/engine. Subaru WMI: 4S3, JF1, JF2. Position 4-5 = model. Position 10 = model year code. | Trims: Base, Premium, Limited, Touring, Onyx. EyeSight standard all trims (2020+). |
| 2019 | VIN pos 4-8 identifies model/body/engine. Subaru WMI: 4S3, JF1, JF2. Position 4-5 = model. Position 10 = model year code. | Trims: Base, Premium, Limited, Touring, Onyx. EyeSight standard all trims (2020+). |
24 ADAS systems documented across 2015-2019. Rows that apply to only part of the generation carry a year badge.
EyeSight driver assistance and Subaru rear-detection equipment vary by trim and build. Verify the exact stereo camera, BSD/RCTA, rear camera, and calibration procedures by VIN in Subaru service information.
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Stereo) 2015 | Forward Camera | Camera | Static | YES | 86252-AL700 | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) | Forward Camera | Camera | Static | YES | - | |
| Adaptive Cruise Control (ACC) | Forward Camera | Camera | Static | YES | - | |
| Automatic Emergency Braking (AEB) | Forward Camera | Camera | Static | YES | - | |
| Rear View Camera 2015 | Rear Camera | Camera | Static | YES | 86267 | |
| Blind Spot Monitor Sensor - Left (BSM) 2015 | Blind Spot Monitor | Radar | Static + Dynamic | YES | 88261 | |
| Blind Spot Monitor Sensor - Right (BSM) 2015 | Blind Spot Monitor | Radar | Static + Dynamic | YES | 88261 | |
| Rear Cross Traffic Alert (RCTA) | Blind Spot Monitor | Radar | None | YES | - | |
| Forward Camera (Stereo) 2016 | Forward Camera | Camera | Static | YES | 86252-AL700 | |
| Rear View Camera 2016 | Rear Camera | Camera | Static | YES | 86267 | |
| Blind Spot Monitor Sensor - Left (BSM) 2016 | Blind Spot Monitor | Radar | Static + Dynamic | YES | 88261 | |
| Blind Spot Monitor Sensor - Right (BSM) 2016 | Blind Spot Monitor | Radar | Static + Dynamic | YES | 88261 | |
| Forward Camera (Stereo) 2017 | Forward Camera | Camera | Static | YES | 86252-AL700 | |
| Rear View Camera 2017 | Rear Camera | Camera | Static | YES | 86267 | |
| Blind Spot Monitor Sensor - Left (BSM) 2017 | Blind Spot Monitor | Radar | Static + Dynamic | YES | 88261 | |
| Blind Spot Monitor Sensor - Right (BSM) 2017 | Blind Spot Monitor | Radar | Static + Dynamic | YES | 88261 | |
| Forward Camera (Stereo) 2018 | Forward Camera | Camera | Static | YES | 86252-AL700 | |
| Rear View Camera 2018 | Rear Camera | Camera | Static | YES | 86267 | |
| Blind Spot Monitor Sensor - Left (BSM) 2018 | Blind Spot Monitor | Radar | Static + Dynamic | YES | 88261 | |
| Blind Spot Monitor Sensor - Right (BSM) 2018 | Blind Spot Monitor | Radar | Static + Dynamic | YES | 88261 | |
| Forward Camera (Stereo) 2019 | Forward Camera | Camera | Static | YES | 86252-AL700 | |
| Rear View Camera 2019 | Rear Camera | Camera | Static | YES | 86267 | |
| Blind Spot Monitor Sensor - Left (BSM) 2019 | Blind Spot Monitor | Radar | Static + Dynamic | YES | 88261 | |
| Blind Spot Monitor Sensor - Right (BSM) 2019 | Blind Spot Monitor | Radar | Static + Dynamic | YES | 88261 |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationVerify EyeSight equipment by VIN. Follow the exact model-year Subaru service procedure for camera calibration after windshield, camera, bracket, alignment, or structural work.
Inspect mounts, wiring, and sensor position before calibration or initialization. Use SSM4/Subaru service information for the VIN's actual equipment rather than later-generation procedures.
Verify VIN-specific module variant, perform required programming or registration, complete immobilizer/key relearn where applicable, and clear DTCs before return to service.
23 documented Subaru Outback modules across 2015-2019. Open a group for part numbers, programming protocol, security notes, and clone support.
_years covers only 2015-2017 for this generation
Compatible donor years: 2015, 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2015 for this generation
Compatible donor years: 2015
Always match the full part number before buying a used module.
_years covers only 2016-2017 for this generation
Compatible donor years: 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
clone_supported indicates cloning or bench work
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Donor must match part family SSM4 OR THE SUBARU PARTS CATALOG; VIN-locked - requires cloning
Always match the full part number before buying a used module.
programming_method indicates OBD programming or coding
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
clone_supported indicates cloning or bench work
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Donor must match part family SSM4 OR THE SUBARU PARTS CATALOG; VIN-locked - requires cloning
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2015-2016 for this generation
Compatible donor years: 2015, 2016
Always match the full part number before buying a used module.
_years covers only 2017-2018 for this generation
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family 31705-AL0; VIN-locked
Always match the full part number before buying a used module.
clone_supported indicates cloning or bench work
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Donor must match part family SSM4 OR THE SUBARU PARTS CATALOG - requires cloning
Always match the full part number before buying a used module.
clone_supported indicates cloning or bench work
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Donor must match part family 85002-AL000 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2015 for this generation
Compatible donor years: 2015
Donor must match part family 85002-AL030 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2016 for this generation
Compatible donor years: 2016
Donor must match part family 85002-AL040 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2017 for this generation
Compatible donor years: 2017
Donor must match part family 85002-AL050 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family 85002-AL060 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family 85002-AL070 - requires cloning
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
3 gateway, immobilizer, and security items documented across 2015-2019.
Subaru Smart Access (push-to-start); no OBD pin extraction; AKL requires SSM4 + Subaru STIS dealer authorization
security_type indicates immobilizer or VIN security
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Donor must match part family SSM4 OR THE SUBARU PARTS CATALOG; VIN-locked
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
KISM replacement requires SSM4 + STIS dealer authorization. ECM replacement requires SSM4 programming + VIN + IMMO coding. No PIN extraction via OBD. AKL: all keys erased; all customer keys required. Max 4 Smart Keys.
Yes. Core Auto Logic supports generation-scoped module programming for the Subaru Outback (2015-2019). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
The Subaru Outback (2015-2019) generation currently shows 13 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Module (ACM) (2015-2017), Airbag Control Module (ACM) (2015), and Airbag Control Module (ACM) (2016-2017). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 98251AL11B (2015-2017) - confirm for your exact year/VIN.
The merged generation data documents 24 ADAS systems, including Forward Camera (Stereo) (2015), Lane Keep Assist / Lane Departure Warning (LKA/LDW), Adaptive Cruise Control (ACC), Automatic Emergency Braking (AEB), and Rear View Camera (2015). Calibration triggers include Windshield Replacement, Front or Rear Bumper Repair, and ECM, BCM, KISM, ABS, or Cluster Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Yes. The generation data includes 5 SRS records, including Airbag Control Module (ACM) (2015-2017), Airbag Control Module (ACM) (2015), and Airbag Control Module (ACM) (2016-2017). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 98251AL11B (2015-2017) - confirm for your exact year/VIN.
No assumption should be made across the full span. The generation page merges rows across 2015-2019; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Yes, where the VIN and security workflow support it. The generation data includes 3 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.