Immobilizer: CAS4+/FEM/BDC
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065Covers model years 2010-2020 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Rolls-Royce Ghost built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
The ADAS, module, and security rows below are consolidated across the full 2010-2020 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2010-2020”.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2016 Rolls Royce Ghost. On this vehicle we cover documented systems include Surround View / Top View Camera System (RR31), Forward Camera (Monocular), and Forward Radar (77GHz), this SPAA - RR31 (2021+ Ghost generation) platform vehicle, CAS4+/FEM/BDC immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Verify platform code matches when cross-referencing part numbers across model years.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Verify platform code matches when cross-referencing part numbers across model years.
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
This platform uses BMW Group MOST (optical), PT-CAN, K-CAN, FlexRay (chassis/DSC) with ISO 15765-4 CAN; UDS; ISTA required - generic OBD incompatible.
This page consolidates Rolls-Royce Ghost service data for 2010-2020 across 11 model years; 11 years have merged CCT data.
Choose a yearMerged ADAS coverage includes 13 system records, including Rear View Camera (2010-2011), Rear View Camera (2012-2014), Surround View / Top View Camera System (RR31) (2015-2018), and Forward Camera (Monocular) (2015-2018). Year-marked systems apply only to the shown range.
View ADAS dataThis generation has 29 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersThe merged generation page indexes 54 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway, immobilizer, and key-security coverage includes 11 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Rolls-Royce Ghost 2010-2020 span, with exact-year validation before service.
Get a quoteYes
ISTA ISN sync with CAS. Adaptation values reset.
Yes
ISTA DSC reset + steering angle sensor initialization.
Yes
Forward camera recalibration required after windshield R&R. OEM scan tool guided static calibration.
High
ISTA-D front camera calibration required after windshield replacement. Static + dynamic calibration needed.
High
ISTA-D front camera calibration required after windshield replacement. Static + dynamic calibration needed.
High
ISTA-D front camera calibration required after windshield replacement. Static + dynamic calibration needed.
required
ISTA guided static calibration. OEM RR31 bespoke windshield only - different from pre-RR31 Ghost. Factory authorization required.
required
ISTA guided static calibration. OEM RR31 bespoke windshield only - different from pre-RR31 Ghost. Factory authorization required.
required
ISTA guided static calibration. OEM RR31 bespoke windshield only - different from pre-RR31 Ghost. Factory authorization required.
required
ISTA guided static calibration. OEM bespoke windshield only. Factory authorization required. 2019-2020 camera part - do not substitute 2021+ RR31 parts.
required
ISTA guided static calibration. OEM bespoke windshield only. Factory authorization required. 2019-2020 camera part - do not substitute 2021+ RR31 parts.
Yes
Camera module replacement requires full recalibration using OEM scan tool.
Yes
Camera module replacement requires full recalibration using OEM scan tool.
Yes
Inspect and recalibrate forward camera after any front-end collision using OEM scan tool.
Yes
Forward radar angular alignment required after front bumper R&R. Use OEM scan tool.
Yes
Radar module replacement requires alignment/calibration using OEM scan tool.
Yes
Radar module replacement requires alignment/calibration using OEM scan tool.
Yes
BSD radar alignment required after rear bumper R&R. Use OEM scan tool.
Yes
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
Yes
Surround view mirror camera recalibration required after mirror R&R. Use OEM scan tool.
required
ISTA surround camera calibration. All-round illumination trim in mirror housing - OEM replacement only.
Yes
Surround view mirror camera recalibration required after mirror R&R. Use OEM scan tool.
High
ISTA-D radar alignment and calibration. Static alignment + dynamic road test required.
High
ISTA-D radar alignment and calibration. Static alignment + dynamic road test required.
High
ISTA-D radar alignment and calibration. Static alignment + dynamic road test required.
Critical
ISTA-D + BMW SFA token required for FRM/BCM programming. Dealer authorization required.
Critical
ISTA-D + BMW SFA token required for FRM/BCM programming. Dealer authorization required.
Critical
ISTA-D + BMW SFA token required for FRM/BCM programming. Dealer authorization required.
Critical
ISTA-D + BMW SFA token required for FRM/BCM programming. Dealer authorization required.
High
ISTA-D bleed procedure and DSC calibration required after ABS module replacement.
High
ISTA-D bleed procedure and DSC calibration required after ABS module replacement.
High
ISTA-D bleed procedure and DSC calibration required after ABS module replacement.
Medium
Suspension work may affect camera and radar alignment. ISTA-D recalibration and ride height reset required.
Medium
Suspension work may affect camera and radar alignment. ISTA-D recalibration and ride height reset required.
Medium
Suspension work may affect camera and radar alignment. ISTA-D recalibration and ride height reset required.
required
ISTA guided radar and camera calibrations. RR31 updated front bumper design. Vehicle at curb weight. Factory authorization.
required
ISTA guided radar and camera calibrations. RR31 updated front bumper design. Vehicle at curb weight. Factory authorization.
required
ISTA guided radar and camera calibrations. RR31 updated front bumper design. Vehicle at curb weight. Factory authorization.
required
ISTA guided radar and camera calibrations. RR31 updated front bumper design. Vehicle at curb weight. Factory authorization.
required
ISTA guided radar and camera calibrations. RR31 updated front bumper design. Vehicle at curb weight. Factory authorization.
required
ISTA guided radar alignment. Inspect radar bracket. Vehicle at curb weight. Factory authorization.
required
ISTA guided radar alignment. Inspect radar bracket. Vehicle at curb weight. Factory authorization.
required
ISTA guided radar alignment. Inspect radar bracket. Vehicle at curb weight. Factory authorization.
required
ISTA guided radar alignment. Inspect radar bracket. Vehicle at curb weight. Factory authorization.
required
ISTA initialization for lane change radars. PDC coding if sensors replaced. Rear camera calibration if disturbed.
required
ISTA initialization for lane change radars. PDC coding if sensors replaced. Rear camera calibration if disturbed.
required
ISTA initialization for lane change radars. PDC coding if sensors replaced. Rear camera calibration if disturbed.
required
Full ISTA scan. ACM crash clear or replace with factory authorization. All-round illumination trim panels damaged in collision - OEM replacement only. All ADAS recalibrate.
required
Full ISTA scan. ACM crash clear or replace with factory authorization. All-round illumination trim panels damaged in collision - OEM replacement only. All ADAS recalibrate.
required
Full ISTA scan. ACM crash clear or replace with factory authorization. All-round illumination trim panels damaged in collision - OEM replacement only. All ADAS recalibrate.
required
Full ISTA scan. ACM crash clear or replace with factory authorization. All-round illumination trim panels damaged in collision - OEM replacement only. All ADAS recalibrate.
required
Full ISTA scan. ACM crash clear or replace with factory authorization. All-round illumination trim panels damaged in collision - OEM replacement only. All ADAS recalibrate.
required
Full ISTA scan. ACM crash clear or replace with factory authorization. Steering column coded to VIN - verify integrity. All ADAS recalibrate.
required
Full ISTA scan. ACM crash clear or replace with factory authorization. Steering column coded to VIN - verify integrity. All ADAS recalibrate.
required
Full ISTA scan. ACM crash clear or replace with factory authorization. Steering column coded to VIN - verify integrity. All ADAS recalibrate.
required
Full ISTA scan. ACM crash clear or replace with factory authorization. Steering column coded to VIN - verify integrity. All ADAS recalibrate.
required
ISTA satellite-aided transmission calibration if TCM or GPS antenna replaced. Transmission adaptation at operating temp. Unique to RR31.
required
ISTA satellite-aided transmission calibration if TCM or GPS antenna replaced. Transmission adaptation at operating temp. Unique to RR31.
required
ISTA satellite-aided transmission calibration if TCM or GPS antenna replaced. Transmission adaptation at operating temp. Unique to RR31.
required
ISTA factory authorization required. Factory-only modules. DME-CAS4+ ISN sync. Battery tender mandatory.
required
ISTA factory authorization required. Factory-only modules. DME-CAS4+ ISN sync if either replaced. Battery tender mandatory.
| Year | VIN split | Infotainment | Wireless CarPlay | Trim notes |
|---|---|---|---|---|
| 2010 | VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2011 | VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2012 | VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2013 | VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2014 | VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2015 | VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2016 | VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2017 | VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2018 | VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2019 | VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code. | Rolls-Royce Spirit | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2020 | VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code. | Rolls-Royce Spirit | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
13 ADAS systems documented across 2010-2020. Rows that apply to only part of the generation carry a year badge.
Rolls-Royce Visibility Assist (RR31 enhanced): Adaptive Cruise Control, Automatic Emergency Braking, Lane Warning, Traffic Sign, Surround View, Night Vision, Park Distance Control
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera 2010-2011 | Rear Camera | Camera | None | YES | - | |
| Rear View Camera 2012-2014 | Rear Camera | Camera | None | YES | - | |
| Surround View / Top View Camera System (RR31) 2015-2018 | Forward Camera | Camera | Static | YES | ~66549473610 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Camera (Monocular) 2015-2018 | Forward Camera | Camera | Static | YES | ~66549474021 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) 2015-2018 | Front Radar | Radar | Static | YES | ~66549474022 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Lane Change Warning / Blind Zone (Rear Radars) 2015-2018 | Side Radar | Radar | None | YES | ~66549474023 (L), 66549474024 (R) (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Park Distance Control (PDC) 2015-2018 | Ultrasonic | Ultrasonic | None | YES | ~66219474030 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Night Vision (updated RR31) 2015-2018 | Forward Camera | Camera | Static | YES | ~66549474025 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Surround View / Top View Camera System 2019-2020 | Forward Camera | Camera | Static | YES | ~66542467517 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Camera (Monocular) 2019-2020 | Forward Camera | Camera | Static | YES | ~66548074811 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) 2019-2020 | Front Radar | Radar | Static | YES | ~66546835698 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Lane Change Warning / Blind Zone Assist 2019-2020 | Side Radar | Radar | None | YES | ~66546917019 (L), 66546917020 (R) (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Park Distance Control (PDC) 2019-2020 | Ultrasonic | Ultrasonic | None | YES | ~66209461550 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationISTA ISN sync with CAS. Adaptation values reset.
ISTA DSC reset + steering angle sensor initialization.
Forward camera recalibration required after windshield R&R. OEM scan tool guided static calibration.
Camera module replacement requires full recalibration using OEM scan tool.
Inspect and recalibrate forward camera after any front-end collision using OEM scan tool.
Forward radar angular alignment required after front bumper R&R. Use OEM scan tool.
Radar module replacement requires alignment/calibration using OEM scan tool.
BSD radar alignment required after rear bumper R&R. Use OEM scan tool.
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
Surround view mirror camera recalibration required after mirror R&R. Use OEM scan tool.
ISTA-D front camera calibration required after windshield replacement. Static + dynamic calibration needed.
ISTA-D radar alignment and calibration. Static alignment + dynamic road test required.
ISTA-D + BMW SFA token required for FRM/BCM programming. Dealer authorization required.
ISTA-D bleed procedure and DSC calibration required after ABS module replacement.
Suspension work may affect camera and radar alignment. ISTA-D recalibration and ride height reset required.
ISTA guided static calibration. OEM RR31 bespoke windshield only - different from pre-RR31 Ghost. Factory authorization required.
ISTA guided radar and camera calibrations. RR31 updated front bumper design. Vehicle at curb weight. Factory authorization.
ISTA initialization for lane change radars. PDC coding if sensors replaced. Rear camera calibration if disturbed.
ISTA surround camera calibration. All-round illumination trim in mirror housing - OEM replacement only.
Full ISTA scan. ACM crash clear or replace with factory authorization. All-round illumination trim panels damaged in collision - OEM replacement only. All ADAS recalibrate.
ISTA satellite-aided transmission calibration if TCM or GPS antenna replaced. Transmission adaptation at operating temp. Unique to RR31.
ISTA factory authorization required. Factory-only modules. DME-CAS4+ ISN sync. Battery tender mandatory.
ISTA guided static calibration. OEM bespoke windshield only. Factory authorization required. 2019-2020 camera part - do not substitute 2021+ RR31 parts.
ISTA guided radar alignment. Inspect radar bracket. Vehicle at curb weight. Factory authorization.
Full ISTA scan. ACM crash clear or replace with factory authorization. Steering column coded to VIN - verify integrity. All ADAS recalibrate.
ISTA factory authorization required. Factory-only modules. DME-CAS4+ ISN sync if either replaced. Battery tender mandatory.
Camera module replacement requires full recalibration using OEM scan tool.
Radar module replacement requires alignment/calibration using OEM scan tool.
Surround view mirror camera recalibration required after mirror R&R. Use OEM scan tool.
54 documented Rolls-Royce Ghost modules across 2010-2020. Open a group for part numbers, programming protocol, security notes, and clone support.
_years covers only 2010-2013 for this generation
Compatible donor years: 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2014 for this generation
Compatible donor years: 2014
Donor must match part family 6G1014G155CA - requires cloning
Always match the full part number before buying a used module.
_years covers only 2016-2017 for this generation
Compatible donor years: 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2010-2013 for this generation
Compatible donor years: 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2014 for this generation
Compatible donor years: 2014
Always match the full part number before buying a used module.
_years covers only 2010-2013 for this generation
Compatible donor years: 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2014 for this generation
Compatible donor years: 2014
Always match the full part number before buying a used module.
_years covers only 2014-2017 for this generation
Compatible donor years: 2014, 2015, 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2014-2017 for this generation
Compatible donor years: 2014, 2015, 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2014-2017 for this generation
Compatible donor years: 2014, 2015, 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2015 for this generation
Compatible donor years: 2015
Always match the full part number before buying a used module.
_years covers only 2016-2020 for this generation
Compatible donor years: 2016, 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2010-2014 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2010-2014 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Donor must match part family ~61357620474 (VERIFY VIA ISTA VIN); VIN-locked
Always match the full part number before buying a used module.
_years covers only 2010-2011 for this generation
Compatible donor years: 2010, 2011
Always match the full part number before buying a used module.
_years covers only 2012-2013 for this generation
Compatible donor years: 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2014-2015 for this generation
Compatible donor years: 2014, 2015
Always match the full part number before buying a used module.
_years covers only 2016-2017 for this generation
Compatible donor years: 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2010-2014 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2010-2014 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2010-2014 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015 for this generation
Compatible donor years: 2015
Always match the full part number before buying a used module.
_years covers only 2016-2018 for this generation
Compatible donor years: 2016, 2017, 2018
Donor must match part family ~34516879099 (VERIFY VIA ISTA VIN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Donor must match part family ~34516879099 (VERIFY VIA ISTA VIN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2010 for this generation
Compatible donor years: 2010
Donor must match part family 62109249280 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2011 for this generation
Compatible donor years: 2011
Donor must match part family 62109249281 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2012 for this generation
Compatible donor years: 2012
Donor must match part family 62109249282 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2013 for this generation
Compatible donor years: 2013
Donor must match part family 62109348620 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2014 for this generation
Compatible donor years: 2014
Donor must match part family 62109348621 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2015-2019 for this generation
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Donor must match part family 62106835249 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Donor must match part family 62108748999 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2010-2019 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2010-2019 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2010-2018 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2010-2018 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2010-2018 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2010-2018 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
11 gateway, immobilizer, and security items documented across 2010-2020.
CAS4+ (BMW/Rolls-Royce factory-auth) - ISTA + RR dealer authorization only
_years covers only 2010-2014 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015 for this generation
Compatible donor years: 2015
Always match the full part number before buying a used module.
_years covers only 2016-2018 for this generation
Compatible donor years: 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2010-2014 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2010-2014 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015 for this generation
Compatible donor years: 2015
Always match the full part number before buying a used module.
_years covers only 2015 for this generation
Compatible donor years: 2015
Always match the full part number before buying a used module.
_years covers only 2016-2018 for this generation
Compatible donor years: 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
FEM/BDC replacement requires ISN reading and coding via BMW our diagnostic software+
Yes. Core Auto Logic supports generation-scoped module programming for the Rolls-Royce Ghost (2010-2020). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
The Rolls-Royce Ghost (2010-2020) generation currently shows 37 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Module (ACM) (2010-2013), Driver Airbag Module (2010-2013), and Passenger Airbag Module (2010-2013). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 6G1014G155CA (2014) - confirm for your exact year/VIN.
The merged generation data documents 13 ADAS systems, including Rear View Camera (2010-2011), Rear View Camera (2012-2014), Surround View / Top View Camera System (RR31) (2015-2018), Forward Camera (Monocular) (2015-2018), and Forward Radar (77GHz) (2015-2018). Calibration triggers include DME Replacement (2010-2014), DSC Module Replacement (2010-2014), Windshield Replacement (2010-2014), and Forward Camera Replacement (2010-2014, 2016-2019). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Yes. The generation data includes 14 SRS records, including Airbag Control Module (ACM) (2010-2013), Driver Airbag Module (2010-2013), and Passenger Airbag Module (2010-2013). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 6G1014G155CA (2014) - confirm for your exact year/VIN.
No assumption should be made across the full span. The generation page merges rows across 2010-2020; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Yes, where the VIN and security workflow support it. The generation data includes 11 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.