VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2011 Rolls-Royce Ghost Supported Services
2011 Rolls-Royce Ghost
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform RR2 (Ghost 1st Gen, 2010-2020)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Rolls-Royce/BMW CAS3+ module (PCF7936-based rolling code); BMW-platform F01-derived; ISTA PIN extraction; AKL requires ISTA + dealer BMW-RR authorization + CAS synchronization
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2011 Rolls Royce Ghost. On this vehicle we cover documented systems include Rear View Camera, this RR2 (Ghost 1st Gen, 2010-2020) platform vehicle, CAS4+/FEM/BDC immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
RR2 (Ghost 1st Gen, 2010-2020)
Production
2010-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES
Exact-year service summary for 2011 Rolls Royce Ghost
ADAS coverage
This 2011 Rolls Royce Ghost page documents 1 ADAS system, including Rear View Camera.
View ADAS dataCalibration triggers
Documented calibration triggers include DME Replacement, DSC Module Replacement, Windshield Replacement, and Forward Camera Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 16 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2011 Rolls Royce Ghost.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2011 Rolls Royce Ghost using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Platform: RR2 (Ghost 1st Gen, 2010-2020) - Confirmed
Driver-assist suite
No standard ADAS suite - pre-Visibility Assist generation. Night Vision and surround sensors available on upper configurations.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code.
Infotainment context
Rolls-Royce Spirit Infotainment (iDrive-based); 8.8" display; Bluetooth; CD/DVD
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2011 Rolls-Royce Ghost. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
1 module documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
1 module documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
3 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
10 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 1
Platform: RR2 (Ghost 1st Gen, 2010-2020)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Rolls Royce Ghost issues we resolve on this platform: Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - RR2 (Ghost 1st Gen, 2010-2020) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No standard ADAS suite - pre-Visibility Assist generation. Night Vision and surround sensors available on upper configurations.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Rear Camera | Camera | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
DME Replacement
ISTA ISN sync with CAS. Adaptation values reset.
DSC Module Replacement
ISTA DSC reset + steering angle sensor initialization.
Windshield Replacement
Forward camera recalibration required after windshield R&R. OEM scan tool guided static calibration.
Forward Camera Replacement
Camera module replacement requires full recalibration using OEM scan tool.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using OEM scan tool.
Front Bumper Repair or Replacement
Forward radar angular alignment required after front bumper R&R. Use OEM scan tool.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using OEM scan tool.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use OEM scan tool.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
Mirror Replacement
Surround view mirror camera recalibration required after mirror R&R. Use OEM scan tool.
SRS Modules
Airbag Control Module (ACM)
- Protocol / method
- OBD
- Cloning supported
- Yes
- Notes
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged.
Passenger Airbag Module
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access.
ECU Modules
DME - 6.6L N74 V12 Twin-Turbo (Ghost) / 6.75L L410 V12 (Phantom)
- Notes
- Rolls-Royce DME. ISTA ISN sync + CAS coding.
BCM Modules
BDC (Body Domain Controller)
- Notes
- Rolls-Royce BDC (BMW-derived platform). ISTA coding required.
TCU / TCM Transmission Modules
TCU - 8HP70 8-Speed Auto 24007571
- Part number
- 24007571
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Infineon TC1797
- Notes
- ZF 8HP70 transmission, requires ISTA/D programming, VIN coding mandatory, ATF spec: ZF LifeguardFluid 8, adaptation reset required after installation
ABS / Brake Modules
DSC (Dynamic Stability Control) Module
- Notes
- Rolls-Royce DSC. ISTA coding + DSC reset.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 62109249281
- Part number
- 62109249281
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Infotainment - Spirit of Ecstasy Rotary Controller (RR31) ~65529474400 (VERIFY VIA ISTA VIN)
- Part number
- ~65529474400 (VERIFY VIA ISTA VIN)
- Notes
- ISTA coding after replacement. RR31 updated HMI system.
Instrument Cluster (KOMBI - RR31) ~62104474401 (VERIFY VIA ISTA VIN)
- Part number
- ~62104474401 (VERIFY VIA ISTA VIN)
- Notes
- ISTA VIN coding. Mileage in CAS4+. Factory-only.
Planar Suspension Control Module ~37146474402 (VERIFY VIA ISTA VIN)
- Part number
- ~37146474402 (VERIFY VIA ISTA VIN)
- Notes
- ISTA coding and suspension calibration. RR31 planar suspension - dual-wishbone front, multi-link rear. Differs from Cullinan air suspension. Height sensor calibration via ISTA after sensor or module replacement.
All-Round Illumination Control (bespoke RR31) ~63119474403 (VERIFY VIA ISTA VIN)
- Part number
- ~63119474403 (VERIFY VIA ISTA VIN)
- Notes
- ISTA coding required after FRM or illumination module replacement. All-round illumination is an RR31 signature feature - bespoke electroluminescent trim panels. If damaged in collision, OEM replacement only.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Space frame aluminum architecture (most rigid RR structure to date); bespoke hand-finished panels
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Rolls-Royce Spirit Infotainment (iDrive-based); 8.8" display; Bluetooth; CD/DVD
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2011 Rolls Royce Ghost?
ADAS calibration pricing for a 2011 Rolls Royce Ghost depends on which of its 1 documented systems need work after a repair. This vehicle is documented with Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2011 Rolls Royce Ghost?
Yes. The 2011 Rolls Royce Ghost uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2011 Rolls Royce Ghost?
After windshield replacement on a 2011 Rolls Royce Ghost, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2011 Rolls Royce Ghost module service take?
Most 2011 Rolls Royce Ghost onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (1 ECU, 1 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2011 Rolls Royce Ghost on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2011 Rolls Royce Ghost. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2011 Rolls Royce Ghost programming?
Every programming, cloning, and calibration job on the 2011 Rolls Royce Ghost is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2011 Rolls Royce Ghost can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2011 Rolls Royce Ghost. For this vehicle our database documents:
- 1 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2011 Rolls-Royce Ghost covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 66516850071
- ECU / PCM Part Numbers
- 12148611341
- BCM / Body Module Part Numbers
- 61359286421
- TCU / TCM Part Numbers
- 24007571
- SRS / Airbag Module Part Numbers
- 65779254101
- ABS / EBCM Part Numbers
- 34526854031
- Instrument Cluster (IPC) Part Numbers
- 62109249281
- Transmission Control Module (TCM) Part Numbers
- 24007571
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2011 Rolls Royce Ghost
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.