Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2019-2026 Rolls-Royce Cullinan Generation Guide

Rolls-Royce Cullinan 1st Gen (2019-2026) ADAS Calibration & Module Programming

Covers model years 2019-2026 - one service guide for the whole generation.

Full ADAS calibration, module programming, and key security work for every Rolls-Royce Cullinan built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.

  • Platform SPAA (Space Frame Aluminum Architecture - Rolls-Royce / BMW Group)
  • CAN Architecture BMW Group MOST (optical infotainment), PT-CAN, Body-CAN (K-CAN), FlexRay (chassis/DSC)
  • Security CAS4+ (BMW/Rolls-Royce factory-auth) - ISTA + RR dealer authorization only; no aftermarket key programming

The ADAS, module, and security rows below are consolidated across the full 2019-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2019-2026”.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2023 Rolls Royce Cullinan. On this vehicle we cover documented systems include Surround View / Top View Camera System, Forward Camera (Monocular), and Forward Radar (77GHz), this SPAA (Space Frame Aluminum Architecture - Rolls-Royce / BMW Group) platform vehicle, CAS4+ (BMW Group / Rolls-Royce) immobilizer support, Rolls-Royce Spirit infotainment programming. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.

Platform
SPAA (Space Frame Aluminum Architecture - Rolls-Royce / BMW Group)
Production
2019-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
AWD
Engine
-
CAN Speed
BMW Group MOST (optical infotainment), PT-CAN, Body-CAN (K-CAN), FlexRay (chassis/DSC)
Feature availability 4

Starlight Headliner (bespoke)

Standard

Fiber-optic headliner with hundreds of individual lights. No module programming required but headliner removal for roof repair will disturb wiring - reconnect all fiber bundles before any SRS curtain check.

Self-Closing Doors

Standard

Soft-close motorized door actuators coded to FRM. ISTA coding required after door module replacement. Door contact switches must be functional for system to operate.

ZF 8HP Transmission (coded to VIN)

Standard

Despite being a ZF platform unit, the Cullinan ZF 8HP is VIN-coded by Rolls-Royce. Plug-and-play substitution is not supported - ISTA adaptation required.

ISTA Factory Authorization (mandatory)

mandatory

All module replacement, ADAS calibration, key programming, and immobilizer work requires ISTA with active Rolls-Royce dealer authorization token. No exceptions. Shops without ISTA authorization cannot service these vehicles at the module programming level.

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Tool subscription required

Service-level scanner-vendor source packet plus exact-year ADAS records.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Bench programmer source packet plus exact-year module/security records.

PLATFORM

Know this platform

This platform uses BMW Group MOST (optical infotainment), PT-CAN, Body-CAN (K-CAN), FlexRay (chassis/DSC) with ISO 15765-4 CAN; UDS; ISTA required - generic OBD tools incompatible.

CAN
BMW Group MOST (optical infotainment), PT-CAN, Body-CAN (K-CAN), FlexRay (chassis/DSC)
OBD
ISO 15765-4 CAN; UDS; ISTA required - generic OBD tools incompatible
OPENPILOT / COMMA.AI

Openpilot Compatibility

Not Supported

Not supported - rolls-royce not in openpilot support tree

Not in openpilot support tree as of April 2026. Rolls-Royce not in openpilot support tree. Luxury brand not ported.

GENERATION SERVICE SNAPSHOT

Generation service summary for Rolls-Royce Cullinan 1st Gen (2019-2026)

Generation coverage

This page consolidates Rolls-Royce Cullinan service data for 2019-2026 across 8 model years; 8 years have merged CCT data.

Choose a year

ADAS coverage

Merged ADAS coverage includes 6 system records, including Surround View / Top View Camera System, Forward Camera (Monocular), Forward Radar (77GHz), and Lane Keep Assist / Lane Departure Warning (LKA/LDW). Year-marked systems apply only to the shown range.

View ADAS data

Calibration triggers

This generation has 11 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.

View triggers

Programmable modules

The merged generation page indexes 28 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.

View modules

Gateway and security

Gateway, immobilizer, and key-security coverage includes 2 merged records. Security procedures vary by year - verify by VIN.

View security

Core Auto Logic capability

Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Rolls-Royce Cullinan 2019-2026 span, with exact-year validation before service.

Get a quote
CALIBRATION

Do I need calibration?

Windshield Replacement 3

Forward Camera (AEB

2019-2026

required

ISTA guided static camera calibration required. Rolls-Royce bespoke laminated windshield - OEM glass mandatory. Factory authorization required for ISTA calibration function. Calibration failure common with non-OEM glass.

Lane Warning)

2019-2026

required

ISTA guided static camera calibration required. Rolls-Royce bespoke laminated windshield - OEM glass mandatory. Factory authorization required for ISTA calibration function. Calibration failure common with non-OEM glass.

Night Vision (if camera near glass)

2019-2026

required

ISTA guided static camera calibration required. Rolls-Royce bespoke laminated windshield - OEM glass mandatory. Factory authorization required for ISTA calibration function. Calibration failure common with non-OEM glass.

Front Bumper Repair or Replacement 5

Front Radar (ACC

2019-2026

required

ISTA guided radar alignment required after front bumper work. Spirit of Ecstasy grille and hood ornament area - inspect all camera and sensor mounting points. Night vision camera recalibration if front grille removed. Vehicle at curb weight on level surface. Factory authorization required.

AEB)

2019-2026

required

ISTA guided radar alignment required after front bumper work. Spirit of Ecstasy grille and hood ornament area - inspect all camera and sensor mounting points. Night vision camera recalibration if front grille removed. Vehicle at curb weight on level surface. Factory authorization required.

Night Vision Camera

2019-2026

required

ISTA guided radar alignment required after front bumper work. Spirit of Ecstasy grille and hood ornament area - inspect all camera and sensor mounting points. Night vision camera recalibration if front grille removed. Vehicle at curb weight on level surface. Factory authorization required.

Front PDC

2019-2026

required

ISTA guided radar alignment required after front bumper work. Spirit of Ecstasy grille and hood ornament area - inspect all camera and sensor mounting points. Night vision camera recalibration if front grille removed. Vehicle at curb weight on level surface. Factory authorization required.

Front Surround Camera

2019-2026

required

ISTA guided radar alignment required after front bumper work. Spirit of Ecstasy grille and hood ornament area - inspect all camera and sensor mounting points. Night vision camera recalibration if front grille removed. Vehicle at curb weight on level surface. Factory authorization required.

Rear Bumper Repair 3

Lane Change Radar (L/R)

2019-2026

required

ISTA initialization for lane change radars. PDC sensor coding if replaced. Rear surround camera calibration if rear bumper area disturbed.

Rear PDC

2019-2026

required

ISTA initialization for lane change radars. PDC sensor coding if replaced. Rear surround camera calibration if rear bumper area disturbed.

Rear Surround Camera

2019-2026

required

ISTA initialization for lane change radars. PDC sensor coding if replaced. Rear surround camera calibration if rear bumper area disturbed.

Mirror Replacement 1

Side Surround View Cameras (L/R)

2019-2026

required

ISTA surround camera calibration required after mirror assembly replacement. Calibration mat procedure per RR workshop manual.

Any Collision 4

ACM

2019-2026

required

Full ISTA module scan mandatory. ACM crash clear or replace with factory authorization. All ADAS sensors inspect and recalibrate. Steering column is coded to VIN - inspect for damage and verify ISTA coding after any steering column disturbance. Factory authorization for all replacements.

all ADAS sensors

2019-2026

required

Full ISTA module scan mandatory. ACM crash clear or replace with factory authorization. All ADAS sensors inspect and recalibrate. Steering column is coded to VIN - inspect for damage and verify ISTA coding after any steering column disturbance. Factory authorization for all replacements.

all deployed airbags and pretensioners

2019-2026

required

Full ISTA module scan mandatory. ACM crash clear or replace with factory authorization. All ADAS sensors inspect and recalibrate. Steering column is coded to VIN - inspect for damage and verify ISTA coding after any steering column disturbance. Factory authorization for all replacements.

steering column

2019-2026

required

Full ISTA module scan mandatory. ACM crash clear or replace with factory authorization. All ADAS sensors inspect and recalibrate. Steering column is coded to VIN - inspect for damage and verify ISTA coding after any steering column disturbance. Factory authorization for all replacements.

Any Suspension, Steering, or Ride Height Work 4

Air Suspension ECAS

2019-2026

required

ISTA air suspension ride height recalibration after suspension service. Steering angle sensor recalibration via ISTA. Front radar aim verification if ride height changed. Factory authorization required.

Steering Angle Sensor

2019-2026

required

ISTA air suspension ride height recalibration after suspension service. Steering angle sensor recalibration via ISTA. Front radar aim verification if ride height changed. Factory authorization required.

DSC/ABS

2019-2026

required

ISTA air suspension ride height recalibration after suspension service. Steering angle sensor recalibration via ISTA. Front radar aim verification if ride height changed. Factory authorization required.

Front Radar (if height changed)

2019-2026

required

ISTA air suspension ride height recalibration after suspension service. Steering angle sensor recalibration via ISTA. Front radar aim verification if ride height changed. Factory authorization required.

Any Module Replacement 9

All modules - DME

2019-2026

required

ISTA factory authorization required for all module programming and coding. Factory-only parts - no aftermarket substitution. Battery tender mandatory throughout. CAS4+ ISN sync with DME required if either replaced.

CAS4+

2019-2026

required

ISTA factory authorization required for all module programming and coding. Factory-only parts - no aftermarket substitution. Battery tender mandatory throughout. CAS4+ ISN sync with DME required if either replaced.

FRM

2019-2026

required

ISTA factory authorization required for all module programming and coding. Factory-only parts - no aftermarket substitution. Battery tender mandatory throughout. CAS4+ ISN sync with DME required if either replaced.

ACM

2019-2026

required

ISTA factory authorization required for all module programming and coding. Factory-only parts - no aftermarket substitution. Battery tender mandatory throughout. CAS4+ ISN sync with DME required if either replaced.

ABS

2019-2026

required

ISTA factory authorization required for all module programming and coding. Factory-only parts - no aftermarket substitution. Battery tender mandatory throughout. CAS4+ ISN sync with DME required if either replaced.

Infotainment

2019-2026

required

ISTA factory authorization required for all module programming and coding. Factory-only parts - no aftermarket substitution. Battery tender mandatory throughout. CAS4+ ISN sync with DME required if either replaced.

Cluster

2019-2026

required

ISTA factory authorization required for all module programming and coding. Factory-only parts - no aftermarket substitution. Battery tender mandatory throughout. CAS4+ ISN sync with DME required if either replaced.

ECAS

2019-2026

required

ISTA factory authorization required for all module programming and coding. Factory-only parts - no aftermarket substitution. Battery tender mandatory throughout. CAS4+ ISN sync with DME required if either replaced.

EGS

2019-2026

required

ISTA factory authorization required for all module programming and coding. Factory-only parts - no aftermarket substitution. Battery tender mandatory throughout. CAS4+ ISN sync with DME required if either replaced.

Forward Camera Replacement 2
2019

Yes

Camera module replacement requires full recalibration using OEM scan tool.

2020-2026

Yes

Camera module replacement requires full recalibration using OEM scan tool.

Forward Radar Replacement 2
2019

Yes

Radar module replacement requires alignment/calibration using OEM scan tool.

2020-2026

Yes

Radar module replacement requires alignment/calibration using OEM scan tool.

MODEL YEARS

Year-by-year details

YearVIN splitInfotainmentWireless CarPlayWireless Android AutoTrim notes
2019VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code.Rolls-Royce Spirit1Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2020VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code.Rolls-Royce Spirit1Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2021VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code.Rolls-Royce Spirit1Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2022VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code.Rolls-Royce Spirit1Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2023VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code.Rolls-Royce Spirit11Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2024VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code.Rolls-Royce Spirit11Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2025VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code.Rolls-Royce Spirit11Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2026VIN pos 4-8 identifies model/body/engine. Rolls-Royce WMI: SCA. Position 4-6 = model code. Position 10 = model year code.Rolls-Royce Spirit11Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

6 ADAS systems documented across 2019-2026. Rows that apply to only part of the generation carry a year badge.

Filter by year
ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Rolls-Royce Visibility Assist: Adaptive Cruise Control, Automatic Emergency Braking, Lane Warning, Surround View, Night Vision, Park Distance Control

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Surround View / Top View Camera SystemForward CameraCameraStatic YES~66542467517 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Forward Camera (Monocular)Forward CameraCameraStatic YES~66548074811 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Forward Radar (77GHz)Front RadarRadarStatic YES~66546835698 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Lane Keep Assist / Lane Departure Warning (LKA/LDW)Side RadarRadarNone YES~66546917019 (L), 66546917020 (R) (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Park Distance Control (PDC)UltrasonicUltrasonicNone YES~66209461550 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Night Vision (Pedestrian Detection)Forward CameraCameraStatic YES~66546978501 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

Windshield Replacement Affected: Forward Camera (AEB, Lane Warning), Night Vision (if camera near glass)

ISTA guided static camera calibration required. Rolls-Royce bespoke laminated windshield - OEM glass mandatory. Factory authorization required for ISTA calibration function. Calibration failure common with non-OEM glass.

Front Bumper Repair or Replacement Affected: Front Radar (ACC, AEB), Night Vision Camera, Front PDC, Front Surround Camera

ISTA guided radar alignment required after front bumper work. Spirit of Ecstasy grille and hood ornament area - inspect all camera and sensor mounting points. Night vision camera recalibration if front grille removed. Vehicle at curb weight on level surface. Factory authorization required.

Rear Bumper Repair Affected: Lane Change Radar (L/R), Rear PDC, Rear Surround Camera

ISTA initialization for lane change radars. PDC sensor coding if replaced. Rear surround camera calibration if rear bumper area disturbed.

Mirror Replacement Affected: Side Surround View Cameras (L/R)

ISTA surround camera calibration required after mirror assembly replacement. Calibration mat procedure per RR workshop manual.

Any Collision Affected: ACM, all ADAS sensors, all deployed airbags and pretensioners, steering column

Full ISTA module scan mandatory. ACM crash clear or replace with factory authorization. All ADAS sensors inspect and recalibrate. Steering column is coded to VIN - inspect for damage and verify ISTA coding after any steering column disturbance. Factory authorization for all replacements.

Any Suspension, Steering, or Ride Height Work Affected: Air Suspension ECAS, Steering Angle Sensor, DSC/ABS, Front Radar (if height changed)

ISTA air suspension ride height recalibration after suspension service. Steering angle sensor recalibration via ISTA. Front radar aim verification if ride height changed. Factory authorization required.

Any Module Replacement Affected: All modules - DME, CAS4+, FRM, ACM, ABS, Infotainment, Cluster, ECAS, EGS

ISTA factory authorization required for all module programming and coding. Factory-only parts - no aftermarket substitution. Battery tender mandatory throughout. CAS4+ ISN sync with DME required if either replaced.

Forward Camera Replacement 2019

Camera module replacement requires full recalibration using OEM scan tool.

Forward Radar Replacement 2019

Radar module replacement requires alignment/calibration using OEM scan tool.

Forward Camera Replacement 2020-2026

Camera module replacement requires full recalibration using OEM scan tool.

Forward Radar Replacement 2020-2026

Radar module replacement requires alignment/calibration using OEM scan tool.

MODULE COVERAGE

Modules we program on this generation

28 documented Rolls-Royce Cullinan modules across 2019-2026. Open a group for part numbers, programming protocol, security notes, and clone support.

SRS MODULES

SRS Modules

Airbag Control Module (ACM) x2
37106850833 Verify by VIN 2019-2022 Under center console, floor tunnel

_years covers only 2019-2022 for this generation

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022

Always match the full part number before buying a used module.

PART
37106850833
LOCATION
Under center console, floor tunnel
MFG
Autoliv (BMW Group sourced)
CHIP/MCU
BMW Group ACM variant
NOTES
ISTA guided crash clear and DTC reset with factory authorization. Hard frontal or side deployment: inspect physically before attempting crash clear. New ACM requires ISTA online factory authorization and VIN coding - factory-only part, no aftermarket ACM substitution. All impact sensors and pretensioners must be verified before delivery. RR seat-integrated airbags: verify mounting after any seat or interior refurbishment work.
37106850583 Verify by VIN 2023-2026 Under center console, floor tunnel

_years covers only 2023-2026 for this generation

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PART
37106850583
LOCATION
Under center console, floor tunnel
MFG
Autoliv (BMW Group sourced)
CHIP/MCU
BMW Group ACM variant
NOTES
ISTA guided crash clear and DTC reset with factory authorization. Hard frontal or side deployment: inspect physically before attempting crash clear. New ACM requires ISTA online factory authorization and VIN coding - factory-only part, no aftermarket ACM substitution. All impact sensors and pretensioners must be verified before delivery. RR seat-integrated airbags: verify mounting after any seat or interior refurbishment work.
Seat-Integrated Airbag Control (if separate) x2
37106850834 Verify by VIN 2019-2022 Front seat bolsters

_years covers only 2019-2022 for this generation

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022

Always match the full part number before buying a used module.

PART
37106850834
LOCATION
Front seat bolsters
MFG
Autoliv
CHIP/MCU
N/A - seat-integrated
NOTES
Rolls-Royce uses bespoke seat-integrated airbag housings within Phantom-level seating. ISTA check after any seat reupholstery or seat removal - verify no airbag squib connector disturbance.
37106850584 Verify by VIN 2023-2026 Front seat bolsters

_years covers only 2023-2026 for this generation

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PART
37106850584
LOCATION
Front seat bolsters
MFG
Autoliv
CHIP/MCU
N/A - seat-integrated
NOTES
Rolls-Royce uses bespoke seat-integrated airbag housings within Phantom-level seating. ISTA check after any seat reupholstery or seat removal - verify no airbag squib connector disturbance.
Occupant Detection Mat (Passenger) Verify by VIN x1

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

NOTES
Passenger seat detection mat. ISTA calibration after seat R&R.
SRS-ECU / ACM 2019-2022 x2
37106850833 Verify by VIN Under center console, floor tunnel

_years covers only 2019-2022 for this generation

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022

Always match the full part number before buying a used module.

PART
37106850833
LOCATION
Under center console, floor tunnel
NOTES
OEM part 37106850833.
37106850834 Verify by VIN Under center console, floor tunnel

_years covers only 2019-2022 for this generation

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022

Always match the full part number before buying a used module.

PART
37106850834
LOCATION
Under center console, floor tunnel
NOTES
OEM part 37106850834.
SRS Module 2023-2026 x2
37106850583 Verify by VIN Under center console, floor tunnel

_years covers only 2023-2026 for this generation

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PART
37106850583
LOCATION
Under center console, floor tunnel
NOTES
OEM part 37106850583.
37106850584 Verify by VIN Under center console, floor tunnel

_years covers only 2023-2026 for this generation

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PART
37106850584
LOCATION
Under center console, floor tunnel
NOTES
OEM part 37106850584.
ECU MODULES

ECU Modules

DME - 6.75L twin-turbo V12 (N74 variant) Bench clone required ~12148614710 (VERIFY VIA ISTA VIN)

clone_supported indicates cloning or bench work

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Donor must match part family ~12148614710 (VERIFY VIA ISTA VIN) - requires cloning

Always match the full part number before buying a used module.

PART
~12148614710 (VERIFY VIA ISTA VIN)
PROTOCOL
ISTA Programming
CODING
Yes
CLONE
No
CHIP/MCU
Bosch MEVD17.2 (BMW N74 variant)
NOTES
ISTA guided flash programming with Rolls-Royce factory authorization. No clone - factory-only. DME and CAS4+ ISN must be synchronized after DME replacement. Battery tender required at 14.4V throughout. V12 has dual-bank calibration - throttle body adaptation, fuel trim reset, and VANOS adaptation all required post-programming. Programming session 90-180 minutes.
EGS - ZF 8HP Transmission Control Verify by VIN ~24607637405 (VERIFY VIA ISTA VIN)

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PART
~24607637405 (VERIFY VIA ISTA VIN)
PROTOCOL
ISTA Programming
CODING
Yes
CLONE
No
CHIP/MCU
ZF TCU
NOTES
ISTA guided coding. ZF 8HP transmission coded to VIN on Rolls-Royce - not plug-and-play despite being ZF. ISTA adaptation and learning procedure required after replacement. Transmission must reach operating temperature for final adaptation to complete.
BCM MODULES

BCM Modules

Footwell Module (FRM) / Body Domain Controller Bench clone required ~61359481200 (VERIFY VIA ISTA VIN)

clone_supported indicates cloning or bench work

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Donor must match part family ~61359481200 (VERIFY VIA ISTA VIN) - requires cloning

Always match the full part number before buying a used module.

PART
~61359481200 (VERIFY VIA ISTA VIN)
SECURITY
bmw_crypto
CODING
Yes
CLONE
No
NOTES
ISTA guided coding with factory authorization. No clone - factory-only module. FRM controls exterior lighting, interior ambient, and soft-close door actuation. Coding to VIN required. Battery disconnect procedure before removal. ISTA will require remote authorization token for Rolls-Royce FRM.
Car Access System (CAS4+ / CAFD) Dealer security required ~61357620474 (VERIFY VIA ISTA VIN)

security_type indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Donor must match part family ~61357620474 (VERIFY VIA ISTA VIN); VIN-locked

Always match the full part number before buying a used module.

PART
~61357620474 (VERIFY VIA ISTA VIN)
SECURITY
bmw_crypto
CODING
Yes
CLONE
No
NOTES
ISTA factory authorization required. CAS4+ immobilizer - manages vehicle access and start authorization. CAS replacement requires ISTA VIN coding + ISN sync with DME/EGS. No aftermarket substitute. CAS is the heart of the RR immobilizer system - requires factory ISN retrieval.
TCU / TCM TRANSMISSION MODULES

TCU / TCM Transmission Modules

TCU - ZF 8HP76 8-Speed Auto Verify by VIN 2019-2020 8HP76

_years covers only 2019-2020 for this generation

Used/donor module guide

Compatible donor years: 2019, 2020

Always match the full part number before buying a used module.

PART
8HP76
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Infineon TC1797
NOTES
BMW ISTA/D required for programming. ATF: ZF LifeGuard 8. Adaptation run mandatory after install. VIN coding essential.
TCU - 8HP76 8-Speed Auto Verify by VIN 2021-2022 8HP76

_years covers only 2021-2022 for this generation

Used/donor module guide

Compatible donor years: 2021, 2022

Always match the full part number before buying a used module.

PART
8HP76
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Infineon TC1797
NOTES
ZF 8HP76 transmission, requires BMW ISTA/D programming, ATF spec ZF LifeGuard Fluid 8, adaptive learning required after installation
TCU - 8HP76 8-Speed Auto Verify by VIN 2023-2024 8HP76

_years covers only 2023-2024 for this generation

Used/donor module guide

Compatible donor years: 2023, 2024

Always match the full part number before buying a used module.

PART
8HP76
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Continental TC1797
NOTES
ZF 8HP76 transmission, requires BMW ISTA/D programming, adaptation procedure mandatory after installation, ATF spec: ZF LifeguardFluid 8, shift relearn via 20km drive cycle
TCU - 8HP95X 8-Speed Auto Verify by VIN 2025-2026 8HP95X

_years covers only 2025-2026 for this generation

Used/donor module guide

Compatible donor years: 2025, 2026

Always match the full part number before buying a used module.

PART
8HP95X
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Infineon TC297
NOTES
ZF 8HP95X requires BMW ISTA/D programming, adaptive learning cycle, ZF LifeguardFluid 9, ISN synchronization mandatory
ABS / BRAKE MODULES

ABS / Brake Modules

ABS/DSC Module (BMW Group - Bosch iBooster) Bench clone required ~34516879099 (VERIFY VIA ISTA VIN)

clone_supported indicates cloning or bench work

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Donor must match part family ~34516879099 (VERIFY VIA ISTA VIN) - requires cloning

Always match the full part number before buying a used module.

PART
~34516879099 (VERIFY VIA ISTA VIN)
CLONE
No
NOTES
ISTA coding and automated brake bleed required after replacement. No clone. Active air suspension integration - verify all four-corner height sensors operational post-replacement. Steering angle sensor recalibration via ISTA. Factory authorization required for ISTA DSC coding function.
OTHER MODULES (IPC, SAS)

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) Verify by VIN 2019 62108799261

_years covers only 2019 for this generation

Used/donor module guide

Compatible donor years: 2019

Donor must match part family 62108799261 - requires cloning

Always match the full part number before buying a used module.

PART
62108799261
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2020-2023 62108739999

_years covers only 2020-2023 for this generation

Used/donor module guide

Compatible donor years: 2020, 2021, 2022, 2023

Donor must match part family 62108739999 - requires cloning

Always match the full part number before buying a used module.

PART
62108739999
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2024-2026 62109898500

_years covers only 2024-2026 for this generation

Used/donor module guide

Compatible donor years: 2024, 2025, 2026

Donor must match part family 62109898500 - requires cloning

Always match the full part number before buying a used module.

PART
62109898500
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN 2019

_years covers only 2019 for this generation

Used/donor module guide

Compatible donor years: 2019

Always match the full part number before buying a used module.

CODING
Yes
NOTES
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS) Verify by VIN 2019

_years covers only 2019 for this generation

Used/donor module guide

Compatible donor years: 2019

Always match the full part number before buying a used module.

CODING
Yes
NOTES
cross-year extension)
Steering Angle Sensor (SAS) Verify by VIN 2020-2026

_years covers only 2020-2026 for this generation

Used/donor module guide

Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

CODING
Yes
NOTES
INTEGRATED (ZGM steering column)
CONNECTIVITY & ACCESSORIES

Connectivity & Accessories

Infotainment Head Unit (iDrive 7 / Rolls-Royce variant) Verify by VIN ~65529461750 (VERIFY VIA ISTA VIN)

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PART
~65529461750 (VERIFY VIA ISTA VIN)
NOTES
ISTA coding and SVM update required after replacement. Rolls-Royce iDrive 7 is a customized BMW Group unit - confirm RR-specific variant before ordering. Factory authorization required. Bespoke Rolls-Royce HMI on top of iDrive architecture.
Instrument Cluster (KOMBI - BMW Group) Verify by VIN ~62104645678 (VERIFY VIA ISTA VIN)

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PART
~62104645678 (VERIFY VIA ISTA VIN)
NOTES
ISTA VIN coding required. Mileage stored in CAS4+ - mileage transfer via ISTA after cluster replacement. Factory-only.
Air Suspension Control Module (ECAS / VDC) Verify by VIN ~37146878050 (VERIFY VIA ISTA VIN)

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PART
~37146878050 (VERIFY VIA ISTA VIN)
NOTES
ISTA coding required. Air suspension coded to VIN. Height sensor recalibration via ISTA. Self-leveling system - verify all four corners at correct ride height before coding.
Automatic Climate Control (IHKA) Verify by VIN ~64119472882 (VERIFY VIA ISTA VIN)

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PART
~64119472882 (VERIFY VIA ISTA VIN)
NOTES
ISTA coding after replacement. RR four-zone HVAC is standard. Confirm part matches Cullinan four-zone spec.

2 gateway, immobilizer, and security items documented across 2019-2026.

KEY SECURITY & IMMOBILIZER

Key Security & Immobilizer

  • System CAS4+ (BMW Group / Rolls-Royce)
  • Add Key Yes
  • All Keys Lost No

CAS4+ (BMW/Rolls-Royce factory-auth) - ISTA + RR dealer authorization only; no aftermarket key programming

IMMOBILIZER MODULES

Immobilizer Modules

CAS4+ (Car Access System 4+) - Rolls-Royce Verify by VIN ~61357620474 (VERIFY VIA ISTA VIN)

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PART
~61357620474 (VERIFY VIA ISTA VIN)
SECURITY
bmw_cas4plus
NOTES
CAS4+ with BMW/Rolls-Royce factory encryption. Pin extraction requires ISTA with Rolls-Royce factory authorization and ISN retrieval. No aftermarket tool supports Rolls-Royce CAS4+ ISN. AKL is factory dealer procedure only - requires ISTA factory session and Rolls-Royce dealer authorization. Shops should refer AKL cases to authorized Rolls-Royce dealer or ISTA partner with RR credentials. ISN stored in CAS and DME - both must match.
KEY & FOB TYPES

Key & Fob Types

Standard RKE Key Fob Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

NOTES
Key programming requires ISTA with Rolls-Royce factory authorization and dealer credentials. No aftermarket tool or transponder programmer supports Rolls-Royce key programming. Add-key minimum 2 working keys. AKL requires factory dealer authorization and ISTA ISN retrieval - refer to authorized Rolls-Royce dealer. Rolls-Royce keys are bespoke - blanks are dealer-supply only. Labor and key blank cost on AKL is extremely high.

Replacement Notes

FEM/BDC replacement requires ISN reading and coding via BMW our diagnostic software+

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
Space frame aluminum architecture with bespoke aluminum body panels; hand-finished
OBD Protocol
ISO 15765-4 CAN; UDS; ISTA required - generic OBD tools incompatible
CAN Architecture
BMW Group MOST (optical infotainment), PT-CAN, Body-CAN (K-CAN), FlexRay (chassis/DSC)
Infotainment
Rolls-Royce Spirit Infotainment (iDrive 7-based, bespoke RR HMI); 10.25-inch display
OTA Capable
No
Infotainment Name
Rolls-Royce Spirit
Wireless CarPlay
Yes
Wireless Android Auto
Yes
ECU Unlock Supported
No
Custom Programming
Yes
WHAT WE RESOLVE

1st Gen (2019-2026) common module and ADAS issues

  • ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Surround View / Top View Camera System, Forward Camera (Monocular), Forward Radar (77GHz), and Lane Keep Assist / Lane Departure Warning (LKA/LDW). Year-marked systems apply only to the shown range.
  • SRS crash-data and warning light SRS service can involve Airbag Control Module (ACM) (2019-2022), Seat-Integrated Airbag Control (if separate) (2019-2022), and Occupant Detection Mat (Passenger). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
  • Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
  • Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 2 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS

FAQ

Can you program Rolls-Royce Cullinan (2019-2026) modules?

Yes. Core Auto Logic supports generation-scoped module programming for the Rolls-Royce Cullinan (2019-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.

Which modules are documented for Rolls-Royce Cullinan (2019-2026)?

The Rolls-Royce Cullinan (2019-2026) generation currently shows 18 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Module (ACM) (2019-2022), Seat-Integrated Airbag Control (if separate) (2019-2022), and Occupant Detection Mat (Passenger). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 37106850833 (2019-2022) - confirm for your exact year/VIN.

Does Rolls-Royce Cullinan (2019-2026) need ADAS calibration after glass or collision work?

The merged generation data documents 6 ADAS systems, including Surround View / Top View Camera System, Forward Camera (Monocular), Forward Radar (77GHz), Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Park Distance Control (PDC). Calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair, and Mirror Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.

Can you reset the airbag module on Rolls-Royce Cullinan (2019-2026)?

Yes. The generation data includes 9 SRS records, including Airbag Control Module (ACM) (2019-2022), Seat-Integrated Airbag Control (if separate) (2019-2022), and Occupant Detection Mat (Passenger). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 37106850833 (2019-2022) - confirm for your exact year/VIN.

Do all Rolls-Royce Cullinan (2019-2026) years use the same parts?

No assumption should be made across the full span. The generation page merges rows across 2019-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.

Can you program keys or immobilizer systems for Rolls-Royce Cullinan (2019-2026)?

Yes, where the VIN and security workflow support it. The generation data includes 2 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.

How long does service take for Rolls-Royce Cullinan (2019-2026)?

Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.

Is Rolls-Royce Cullinan (2019-2026) service mobile or mail-in?

Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.

OTHER GENERATIONS

More Cullinan generations

1st Gen 2019-2026 You are here