We provide the software and equipment for the agreed work. The exact tool and procedure depend on your year, VIN and module.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
5th Gen D2 - 2019-2026 generation coverage
2019-2026 Ram 3500 service guide ADAS Calibration & Module Programming
Choose a repair service below or find your module by part number. Onsite help is available in Dallas-Fort Worth, with mail-in module service nationwide.
What do you need fixed?
Choose a service to start your quote.
Find your module
63 documented Ram 3500 module records across the 2019-2026 generation. Search by module name or part number, then open a result for requirements and repair options.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ECU / Engine
Engine Control Module (ECM) Dealer security required
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- OBD
- Security
- HITAG Pro / AES
- Coding required
- Yes
- Cloning supported
- No
- Notes
- ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Online server authentication required. Cloning not supported on 2018+ VIN-locked units.
Transmission Control Module (TCM) Dealer security required
The secure gateway requires registered access.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- OBD
- Security
- HITAG Pro / AES
- Coding required
- Yes
- Cloning supported
- No
- Notes
- TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning not supported.
Body Control Module (BCM) Dealer security required
The secure gateway requires registered access.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- OBD
- Security
- HITAG Pro / AES
- Coding required
- Yes
- Cloning supported
- No
- Notes
- BCM requires coding to vehicle VIN after replacement. Security gateway access required on 2018+ models. All comfort/convenience modules must be re-synced via our diagnostic software.
TCM / Transmission
TCU - 68RFE 6-Speed Auto 4 records
J2534
Documented for 2019-2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019, 2020
Donor must match part family 68RFE - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68RFE
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental TC1797
- Notes
- Requires TCM adaptation, gear ratio learn procedure, use ATF+4 fluid, StarSCAN tool recommended
J2534
Documented for 2021-2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021, 2022
Donor must match part family 68105 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68105
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental MPC5674
- Notes
- Relearn via CAN Gateway, requires STAR diagnostic tool, ATF+4 fluid spec, VIN coding mandatory
J2534
Documented for 2023-2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024
Donor must match part family 68367 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68367
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental SH7059
- Notes
- Requires VIN coding, transmission relearn via Chrysler scan tool, ATF+4 specification, shift solenoid adaptation required
J2534
Documented for 2025-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025, 2026
Donor must match part family 68RFE - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68RFE
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental MPC5777M
- Notes
- Requires VIN coding and transmission adaptations. Use ATF+4 fluid. TCM relearn via StarSCAN required.
TCU - AS69RC 6-Speed Auto 3 records
J2534
Documented for 2019-2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019, 2020
Donor must match part family AS69RC - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- AS69RC
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental TC1797
- Notes
- Mercedes-based transmission, requires adaptation and shift point learn, use MB236.14 ATF, special tooling required
J2534
Documented for 2023-2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024
Donor must match part family 68384 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68384
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7263
- Notes
- Aisin unit, requires VIN coding and transmission adaptation, specific clutch timing relearn, ATF WS specification
J2534
Documented for 2025-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025, 2026
Donor must match part family AS69RC - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- AS69RC
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental TC1797
- Notes
- Mercedes-based unit. Requires SCN coding and shift adaptation. Use MB236.14 ATF. StarSCAN programming required.
TCU - 48RE 4-Speed Auto Verify by VIN 2021-2022 1 record
Documented for 2021-2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021, 2022
Donor must match part family 52118 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 52118
- Protocol / method
- Bench
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch TC1796
- Notes
- Legacy transmission, bench programming only, requires original ECU donor, ATF+4 fluid
TCU - AS66RC 6-Speed Auto Verify by VIN 2025-2026 1 record
Documented for 2025-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025, 2026
Donor must match part family AS66RC - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- AS66RC
- Protocol / method
- Bench
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch TC1797
- Notes
- Mercedes NAG1 derivative. Bench programming only. Requires transmission ID and shift pattern coding. Use ATF+4.
BCM / Body electronics
Body Control Module (BCM) 8 records
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68414 (VERIFY VIA DEALERCONNECT)
- Security
- SGW (Security Gateway) + VIN-tied (2018+); SKREEM transponder
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2019 (DT/HD platform): wiTECH 2.0 + TechAuthority (DealerConnect) required for BCM programming. SGW (Security Gateway) active -- wiTECH must be authenticated via TechAuthority PDO subscription before any module access. BCM holds VIN tie and all PROXI configuration (heated seats, remote start, safety systems, trailer). PROXI alignment required after replacement. NOT plug and play. SKREEM transponder relearn with all customer keys.
Documented for 2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68414 (VERIFY VIA DEALERCONNECT)
- Security
- SGW (Security Gateway) + VIN-tied (2018+); SKREEM transponder
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2020 (DT/HD platform): wiTECH 2.0 + TechAuthority (DealerConnect) required for BCM programming. SGW (Security Gateway) active -- wiTECH must be authenticated via TechAuthority PDO subscription before any module access. BCM holds VIN tie and all PROXI configuration (heated seats, remote start, safety systems, trailer). PROXI alignment required after replacement. NOT plug and play. SKREEM transponder relearn with all customer keys.
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68414 (VERIFY VIA DEALERCONNECT)
- Security
- SGW (Security Gateway) + VIN-tied (2018+); SKREEM transponder
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2021 (DT/HD platform): wiTECH 2.0 + TechAuthority (DealerConnect) required for BCM programming. SGW (Security Gateway) active -- wiTECH must be authenticated via TechAuthority PDO subscription before any module access. BCM holds VIN tie and all PROXI configuration (heated seats, remote start, safety systems, trailer). PROXI alignment required after replacement. NOT plug and play. SKREEM transponder relearn with all customer keys.
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68414 (VERIFY VIA DEALERCONNECT)
- Security
- SGW (Security Gateway) + VIN-tied (2018+); SKREEM transponder
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2022 (DT/HD platform): wiTECH 2.0 + TechAuthority (DealerConnect) required for BCM programming. SGW (Security Gateway) active -- wiTECH must be authenticated via TechAuthority PDO subscription before any module access. BCM holds VIN tie and all PROXI configuration (heated seats, remote start, safety systems, trailer). PROXI alignment required after replacement. NOT plug and play. SKREEM transponder relearn with all customer keys.
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68414 (VERIFY VIA DEALERCONNECT)
- Security
- SGW (Security Gateway) + VIN-tied (2018+); SKREEM transponder
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2023 (DT/HD platform): wiTECH 2.0 + TechAuthority (DealerConnect) required for BCM programming. SGW (Security Gateway) active -- wiTECH must be authenticated via TechAuthority PDO subscription before any module access. BCM holds VIN tie and all PROXI configuration (heated seats, remote start, safety systems, trailer). PROXI alignment required after replacement. NOT plug and play. SKREEM transponder relearn with all customer keys.
Documented for 2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68414 (VERIFY VIA DEALERCONNECT)
- Security
- SGW (Security Gateway) + VIN-tied (2018+); SKREEM transponder
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2024 (DT/HD platform): wiTECH 2.0 + TechAuthority (DealerConnect) required for BCM programming. SGW (Security Gateway) active -- wiTECH must be authenticated via TechAuthority PDO subscription before any module access. BCM holds VIN tie and all PROXI configuration (heated seats, remote start, safety systems, trailer). PROXI alignment required after replacement. NOT plug and play. SKREEM transponder relearn with all customer keys.
Documented for 2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68414 (VERIFY VIA DEALERCONNECT)
- Security
- SGW (Security Gateway) + VIN-tied (2018+); SKREEM transponder
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2025 (DT/HD platform): wiTECH 2.0 + TechAuthority (DealerConnect) required for BCM programming. SGW (Security Gateway) active -- wiTECH must be authenticated via TechAuthority PDO subscription before any module access. BCM holds VIN tie and all PROXI configuration (heated seats, remote start, safety systems, trailer). PROXI alignment required after replacement. NOT plug and play. SKREEM transponder relearn with all customer keys.
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68414 (VERIFY VIA DEALERCONNECT)
- Security
- SGW (Security Gateway) + VIN-tied (2018+); SKREEM transponder
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2026 (DT/HD platform): wiTECH 2.0 + TechAuthority (DealerConnect) required for BCM programming. SGW (Security Gateway) active -- wiTECH must be authenticated via TechAuthority PDO subscription before any module access. BCM holds VIN tie and all PROXI configuration (heated seats, remote start, safety systems, trailer). PROXI alignment required after replacement. NOT plug and play. SKREEM transponder relearn with all customer keys.
TIPM (Totally Integrated Power Module) 8 records
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68437 (VERIFY VIA DEALERCONNECT)
- Security
- PROXI-configured via wiTECH
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2019: TIPM (engine bay fuse/relay/power distribution center). wiTECH flash + PROXI alignment after replacement. Verify all circuit assignments and trailer relay function post-install. SGW authentication required.
Documented for 2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68437 (VERIFY VIA DEALERCONNECT)
- Security
- PROXI-configured via wiTECH
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2020: TIPM (engine bay fuse/relay/power distribution center). wiTECH flash + PROXI alignment after replacement. Verify all circuit assignments and trailer relay function post-install. SGW authentication required.
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68437 (VERIFY VIA DEALERCONNECT)
- Security
- PROXI-configured via wiTECH
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2021: TIPM (engine bay fuse/relay/power distribution center). wiTECH flash + PROXI alignment after replacement. Verify all circuit assignments and trailer relay function post-install. SGW authentication required.
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68437 (VERIFY VIA DEALERCONNECT)
- Security
- PROXI-configured via wiTECH
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2022: TIPM (engine bay fuse/relay/power distribution center). wiTECH flash + PROXI alignment after replacement. Verify all circuit assignments and trailer relay function post-install. SGW authentication required.
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68437 (VERIFY VIA DEALERCONNECT)
- Security
- PROXI-configured via wiTECH
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2023: TIPM (engine bay fuse/relay/power distribution center). wiTECH flash + PROXI alignment after replacement. Verify all circuit assignments and trailer relay function post-install. SGW authentication required.
Documented for 2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68437 (VERIFY VIA DEALERCONNECT)
- Security
- PROXI-configured via wiTECH
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2024: TIPM (engine bay fuse/relay/power distribution center). wiTECH flash + PROXI alignment after replacement. Verify all circuit assignments and trailer relay function post-install. SGW authentication required.
Documented for 2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68437 (VERIFY VIA DEALERCONNECT)
- Security
- PROXI-configured via wiTECH
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2025: TIPM (engine bay fuse/relay/power distribution center). wiTECH flash + PROXI alignment after replacement. Verify all circuit assignments and trailer relay function post-install. SGW authentication required.
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68437 (VERIFY VIA DEALERCONNECT)
- Security
- PROXI-configured via wiTECH
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RAM 3500 2026: TIPM (engine bay fuse/relay/power distribution center). wiTECH flash + PROXI alignment after replacement. Verify all circuit assignments and trailer relay function post-install. SGW authentication required.
SRS / Airbag
Occupant Restraint Controller (ORC) 8 records
Under center console
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68399791AC
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68399792AC
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68399793AC
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68399794AC
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
Documented for 2020-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68428504AA
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
Documented for 2020-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68428505AA
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
Documented for 2020-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68428506AA
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
Documented for 2020-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68428507AA
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
ABS / Brakes
ABS/ESC Module (Bosch 9.3 / Continental MK100) - HD 8 records
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68480, 68482 (VERIFY VIA DEALERCONNECT)
- Cloning supported
- No
- Notes
- RAM 3500 2019 (HD): wiTECH ABS module initialization after replacement. 4-wheel brake bleed (pressure or manual) required after HCU replacement. Steering Angle Sensor (SAS) zero-point calibration via wiTECH -- drive straight at 25+ mph on level surface for SAS learning. HD models: verify rear axle brake configuration (SRW vs DRW). Bosch 9.3 on 2500/3500 HD.
Documented for 2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68480, 68482 (VERIFY VIA DEALERCONNECT)
- Cloning supported
- No
- Notes
- RAM 3500 2020 (HD): wiTECH ABS module initialization after replacement. 4-wheel brake bleed (pressure or manual) required after HCU replacement. Steering Angle Sensor (SAS) zero-point calibration via wiTECH -- drive straight at 25+ mph on level surface for SAS learning. HD models: verify rear axle brake configuration (SRW vs DRW). Bosch 9.3 on 2500/3500 HD.
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68480, 68482 (VERIFY VIA DEALERCONNECT)
- Cloning supported
- No
- Notes
- RAM 3500 2021 (HD): wiTECH ABS module initialization after replacement. 4-wheel brake bleed (pressure or manual) required after HCU replacement. Steering Angle Sensor (SAS) zero-point calibration via wiTECH -- drive straight at 25+ mph on level surface for SAS learning. HD models: verify rear axle brake configuration (SRW vs DRW). Bosch 9.3 on 2500/3500 HD.
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68480, 68482 (VERIFY VIA DEALERCONNECT)
- Cloning supported
- No
- Notes
- RAM 3500 2022 (HD): wiTECH ABS module initialization after replacement. 4-wheel brake bleed (pressure or manual) required after HCU replacement. Steering Angle Sensor (SAS) zero-point calibration via wiTECH -- drive straight at 25+ mph on level surface for SAS learning. HD models: verify rear axle brake configuration (SRW vs DRW). Bosch 9.3 on 2500/3500 HD.
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68480, 68482 (VERIFY VIA DEALERCONNECT)
- Cloning supported
- No
- Notes
- RAM 3500 2023 (HD): wiTECH ABS module initialization after replacement. 4-wheel brake bleed (pressure or manual) required after HCU replacement. Steering Angle Sensor (SAS) zero-point calibration via wiTECH -- drive straight at 25+ mph on level surface for SAS learning. HD models: verify rear axle brake configuration (SRW vs DRW). Bosch 9.3 on 2500/3500 HD.
Documented for 2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68480, 68482 (VERIFY VIA DEALERCONNECT)
- Cloning supported
- No
- Notes
- RAM 3500 2024 (HD): wiTECH ABS module initialization after replacement. 4-wheel brake bleed (pressure or manual) required after HCU replacement. Steering Angle Sensor (SAS) zero-point calibration via wiTECH -- drive straight at 25+ mph on level surface for SAS learning. HD models: verify rear axle brake configuration (SRW vs DRW). Bosch 9.3 on 2500/3500 HD.
Documented for 2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68480, 68482 (VERIFY VIA DEALERCONNECT)
- Cloning supported
- No
- Notes
- RAM 3500 2025 (HD): wiTECH ABS module initialization after replacement. 4-wheel brake bleed (pressure or manual) required after HCU replacement. Steering Angle Sensor (SAS) zero-point calibration via wiTECH -- drive straight at 25+ mph on level surface for SAS learning. HD models: verify rear axle brake configuration (SRW vs DRW). Bosch 9.3 on 2500/3500 HD.
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68480, 68482 (VERIFY VIA DEALERCONNECT)
- Cloning supported
- No
- Notes
- RAM 3500 2026 (HD): wiTECH ABS module initialization after replacement. 4-wheel brake bleed (pressure or manual) required after HCU replacement. Steering Angle Sensor (SAS) zero-point calibration via wiTECH -- drive straight at 25+ mph on level surface for SAS learning. HD models: verify rear axle brake configuration (SRW vs DRW). Bosch 9.3 on 2500/3500 HD.
Wheel Speed Sensor - Front (each) Dealer security required 1 record
The secure gateway requires registered access.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family ~68330 (VERIFY VIA DEALERCONNECT) - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68330 (VERIFY VIA DEALERCONNECT)
- Cloning supported
- Yes
- Notes
- Active magnetic WSS. Torque per WSM. wiTECH DTC clear + road test. Replace if DTC C1014/C1015 or C1017/C1018 set.
Wheel Speed Sensor - Rear (each) Dealer security required 1 record
The secure gateway requires registered access.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family ~68330 (VERIFY VIA DEALERCONNECT) - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~68330 (VERIFY VIA DEALERCONNECT)
- Cloning supported
- Yes
- Notes
- Active magnetic WSS. DRW models: single rear WSS reads from axle housing. Verify reluctor ring on rear axle. wiTECH DTC clear + road test.
Other modules
Instrument Panel Cluster (IPC) 7 records
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Donor must match part family 68441324AB - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68441324AB
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Donor must match part family 68441325AB - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68441325AB
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020
Donor must match part family 68302585AC - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68302585AC
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020
Donor must match part family 68280848AE - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68280848AE
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2021-2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021, 2022, 2023, 2024
Donor must match part family 56054968AF - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 56054968AF
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2021-2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021, 2022, 2023, 2024
Donor must match part family 68628476AB - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68628476AB
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2025-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025, 2026
Donor must match part family 68X AA - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68X AA
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) 3 records
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- cross-year extension)
Documented for 2020-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (SCCM clock spring) - Mopar 68442088AC
Connectivity / Accessories
Other 7 records
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Programming required after replacement. Verify software version compatibility before install.
The secure gateway requires registered access.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Factory remote start. BCM configuration required after replacement on equipped vehicles.
The secure gateway requires registered access.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Integrated trailer brake controller on equipped trims. BCM/IPC configuration required. Trailer hitch wiring harness programming may be needed.
Documented for 2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Programming required after replacement. Verify software version compatibility before install.
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Programming required after replacement. Verify software version compatibility before install.
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Programming required after replacement. Verify software version compatibility before install.
Documented for 2023-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Programming required after replacement. Verify software version compatibility before install.
Reference information for 2019-2026. Coverage can vary by year and equipment. Confirm the VIN and full part number before ordering a replacement.
Vehicle overview
- Vehicle
- Ram 3500
- Model years
- 2019-2026
- Generation
- 5th Gen D2
- Platform
- D2
Tools we use for this vehicle
Factory scan, coding, and calibration access
Stellantis wiTECH 2.0
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Security gateway access required No practical workaround
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Tool requirements
Basic OBD2 scanner
View capabilities and limitations
Supported work
- Read codes on SRS systems (8 documented rows)
- Read codes on ECU systems (3 documented rows)
- Read codes on BCM systems (16 documented rows)
- Read codes on TCU / TCM systems (9 documented rows)
- Read codes on ABS systems (10 documented rows)
- Read codes on IPC / SAS systems (10 documented rows)
- Read codes on Keys systems (1 documented row)
- Read codes on Immobilizer systems (1 documented row)
- Read codes on Accessory systems (7 documented rows)
Limitations
- ECU programming, coding, cloning, or security work (3 documented rows)
- ABS programming, coding, cloning, or security work (2 documented rows)
- Keys programming, coding, cloning, or security work (1 documented row)
- Immobilizer programming, coding, cloning, or security work (1 documented row)
- Accessory programming, coding, cloning, or security work (2 documented rows)
Factory programming software (J2534)
View capabilities and limitations
Supported work
- Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Dealer or specialist
View capabilities and limitations
Supported work
- ECU dealer security rows (3 documented rows)
- ABS dealer security rows (2 documented rows)
- Keys dealer security rows (1 documented row)
- Immobilizer dealer security rows (1 documented row)
- Accessory dealer security rows (2 documented rows)
Dealer security and specialist module work should be scoped by VIN before you buy parts or pay for programming.
Get a QuoteKnow this platform
This platform uses CAN-C + CAN-IHS + LIN; SGW on OBD port; OBD2 DLC ISO 15765-4 CAN 500kbps with ISO 15765-4 CAN (500 kbps); SGW bypass required for aftermarket tools. A security gateway requires registered tool access.
- CAN
- CAN-C + CAN-IHS + LIN; SGW on OBD port; OBD2 DLC ISO 15765-4 CAN 500kbps
- OBD
- ISO 15765-4 CAN (500 kbps); SGW bypass required for aftermarket tools
- Gateway
- Stellantis Secure Gateway (SGW)
CAN architecture varies by year OBD protocol varies by year
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - 2025 outside openpilot year range (2019-2022)
Not in openpilot support tree as of April 2026. Supported years: 2019-2022. Heavy-duty variant. 2023+ not yet confirmed.
Generation service summary for Ram 3500 5th Gen D2 (2019-2026)
Generation coverage
This page consolidates Ram 3500 service data for 2019-2026 across 8 model years; service information is available for 8 years.
Choose a yearADAS coverage
Merged ADAS coverage includes 56 system records, including Forward Camera (Mobileye EyeQ4) (2019), Forward Radar (Bosch MRR) (2019), Blind Spot Detection - Left Rear Radar (Aptiv SRR) (2019), and Blind Spot Detection - Right Rear Radar (Aptiv SRR) (2019). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 29 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 63 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, and security-access planning for the Ram 3500 2019-2026 span, with exact-year validation before service. Mail-in module service is available nationwide.
Get a quoteDo I need calibration?
Windshield Replacement (if ADAS camera equipped) 32
Forward Safety Camera
2019Required if equipped
RAM 3500 2019: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Collision Warning
2019Required if equipped
RAM 3500 2019: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
AEB
2019Required if equipped
RAM 3500 2019: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Adaptive Cruise
2019Required if equipped
RAM 3500 2019: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Safety Camera
2020Required if equipped
RAM 3500 2020: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Collision Warning
2020Required if equipped
RAM 3500 2020: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
AEB
2020Required if equipped
RAM 3500 2020: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Adaptive Cruise
2020Required if equipped
RAM 3500 2020: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Safety Camera
2021Required if equipped
RAM 3500 2021: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Collision Warning
2021Required if equipped
RAM 3500 2021: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
AEB
2021Required if equipped
RAM 3500 2021: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Adaptive Cruise
2021Required if equipped
RAM 3500 2021: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Safety Camera
2022Required if equipped
RAM 3500 2022: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Collision Warning
2022Required if equipped
RAM 3500 2022: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
AEB
2022Required if equipped
RAM 3500 2022: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Adaptive Cruise
2022Required if equipped
RAM 3500 2022: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Safety Camera
2023Required if equipped
RAM 3500 2023: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Collision Warning
2023Required if equipped
RAM 3500 2023: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
AEB
2023Required if equipped
RAM 3500 2023: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Adaptive Cruise
2023Required if equipped
RAM 3500 2023: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Safety Camera
2024Required if equipped
RAM 3500 2024: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Collision Warning
2024Required if equipped
RAM 3500 2024: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
AEB
2024Required if equipped
RAM 3500 2024: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Adaptive Cruise
2024Required if equipped
RAM 3500 2024: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Safety Camera
2025Required if equipped
RAM 3500 2025: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Collision Warning
2025Required if equipped
RAM 3500 2025: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
AEB
2025Required if equipped
RAM 3500 2025: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Adaptive Cruise
2025Required if equipped
RAM 3500 2025: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Safety Camera
2026Required if equipped
RAM 3500 2026: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Collision Warning
2026Required if equipped
RAM 3500 2026: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
AEB
2026Required if equipped
RAM 3500 2026: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Adaptive Cruise
2026Required if equipped
RAM 3500 2026: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Camera Replacement 5
Forward Camera
2019-2026Required
wiTECH ADAS initialization + static calibration. SGW authentication required. Same level-surface target procedure as windshield replacement.
FCW
2019-2026Required
wiTECH ADAS initialization + static calibration. SGW authentication required. Same level-surface target procedure as windshield replacement.
AEB
2019-2026Required
wiTECH ADAS initialization + static calibration. SGW authentication required. Same level-surface target procedure as windshield replacement.
LDW
2019-2026Required
wiTECH ADAS initialization + static calibration. SGW authentication required. Same level-surface target procedure as windshield replacement.
Adaptive Cruise
2019-2026Required
wiTECH ADAS initialization + static calibration. SGW authentication required. Same level-surface target procedure as windshield replacement.
Front Bumper Removal/Replacement 8
Forward Radar (if equipped)
2019Required if equipped
RAM 3500 2019: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
Forward Radar (if equipped)
2020Required if equipped
RAM 3500 2020: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
Forward Radar (if equipped)
2021Required if equipped
RAM 3500 2021: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
Forward Radar (if equipped)
2022Required if equipped
RAM 3500 2022: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
Forward Radar (if equipped)
2023Required if equipped
RAM 3500 2023: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
Forward Radar (if equipped)
2024Required if equipped
RAM 3500 2024: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
Forward Radar (if equipped)
2025Required if equipped
RAM 3500 2025: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
Forward Radar (if equipped)
2026Required if equipped
RAM 3500 2026: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
Blind Spot Sensor Replacement 2
Blind Spot Monitoring
2019-2026Required if equipped
Rear corner BSD sensors (one per side). wiTECH initialization after replacement. L/R not interchangeable. Verify BSD mirror warning and RCTA alerts. Available on Laramie/Longhorn/Limited on HD models.
Rear Cross-Traffic Alert
2019-2026Required if equipped
Rear corner BSD sensors (one per side). wiTECH initialization after replacement. L/R not interchangeable. Verify BSD mirror warning and RCTA alerts. Available on Laramie/Longhorn/Limited on HD models.
BCM Replacement 1
All vehicle systems
2019-2026Required
wiTECH 2.0 + TechAuthority (DealerConnect) required. SGW unlock via PDO subscription. PROXI alignment (BCM, TIPM, ECM, ORC, TCM must all be aligned). SKREEM key relearn. VIN tie programming.
ABS/ESC Module Replacement 4
ABS
2019-2026Required
wiTECH module init + 4-wheel brake bleed + SAS zero-point calibration. Verify trailer sway control on tow-equipped units. Drive 25+ mph for SAS learning after calibration.
ESC
2019-2026Required
wiTECH module init + 4-wheel brake bleed + SAS zero-point calibration. Verify trailer sway control on tow-equipped units. Drive 25+ mph for SAS learning after calibration.
SAS
2019-2026Required
wiTECH module init + 4-wheel brake bleed + SAS zero-point calibration. Verify trailer sway control on tow-equipped units. Drive 25+ mph for SAS learning after calibration.
Trailer Sway Control
2019-2026Required
wiTECH module init + 4-wheel brake bleed + SAS zero-point calibration. Verify trailer sway control on tow-equipped units. Drive 25+ mph for SAS learning after calibration.
Steering Angle Sensor Replacement 2
ESC
2019-2026Required
wiTECH SAS zero-point calibration on level surface, wheels straight-ahead. Verify ESC no DTCs after road test.
SAS
2019-2026Required
wiTECH SAS zero-point calibration on level surface, wheels straight-ahead. Verify ESC no DTCs after road test.
ORC (Occupant Restraint Controller) Replacement 16
Airbag
2019Required
RAM 3500 2019: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Seatbelt Pretensioners
2019Required
RAM 3500 2019: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Airbag
2020Required
RAM 3500 2020: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Seatbelt Pretensioners
2020Required
RAM 3500 2020: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Airbag
2021Required
RAM 3500 2021: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Seatbelt Pretensioners
2021Required
RAM 3500 2021: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Airbag
2022Required
RAM 3500 2022: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Seatbelt Pretensioners
2022Required
RAM 3500 2022: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Airbag
2023Required
RAM 3500 2023: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Seatbelt Pretensioners
2023Required
RAM 3500 2023: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Airbag
2024Required
RAM 3500 2024: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Seatbelt Pretensioners
2024Required
RAM 3500 2024: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Airbag
2025Required
RAM 3500 2025: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Seatbelt Pretensioners
2025Required
RAM 3500 2025: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Airbag
2026Required
RAM 3500 2026: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Seatbelt Pretensioners
2026Required
RAM 3500 2026: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Year-by-year details
| Year | Trim notes |
|---|---|
| 2019 | Verify trim level and cab configuration before ordering modules. |
| 2020 | Verify trim level and cab configuration before ordering modules. |
| 2021 | Verify trim level and cab configuration before ordering modules. |
| 2022 | Verify trim level and cab configuration before ordering modules. |
| 2023 | Verify trim level and cab configuration before ordering modules. |
| 2024 | Verify trim level and cab configuration before ordering modules. |
| 2025 | Verify trim level and cab configuration before ordering modules. |
| 2026 | Verify trim level and cab configuration before ordering modules. |
56 ADAS systems documented across the 2019-2026 generation. Rows that apply to only part of the generation carries a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
2024 Ram 2500 HD: Forward Collision Warning/Automatic Emergency Braking, Blind Spot Detection, ParkSense, backup camera, Adaptive Cruise Control, surround view on equipped builds.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Mobileye EyeQ4) 2019 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR) 2019 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Left Rear Radar (Aptiv SRR) 2019 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Right Rear Radar (Aptiv SRR) 2019 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2019 | Rear Camera | Camera | Static | YES | - | |
| Surround View (360° Camera) - Optional 2019 | Surround Camera | Camera | Static | YES | - | |
| PDC Sensors - Rear (Park Distance Control) 2019 | Parking Sensor | sensor | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2020 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR) 2020 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Left Rear Radar (Aptiv SRR) 2020 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Right Rear Radar (Aptiv SRR) 2020 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2020 | Rear Camera | Camera | Static | YES | - | |
| Surround View (360° Camera) - Optional 2020 | Surround Camera | Camera | Static | YES | - | |
| PDC Sensors - Rear (Park Distance Control) 2020 | Parking Sensor | sensor | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2021 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR) 2021 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Left Rear Radar (Aptiv SRR) 2021 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Right Rear Radar (Aptiv SRR) 2021 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2021 | Rear Camera | Camera | Static | YES | - | |
| Surround View (360° Camera) - Optional 2021 | Surround Camera | Camera | Static | YES | - | |
| PDC Sensors - Rear (Park Distance Control) 2021 | Parking Sensor | sensor | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2022 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR) 2022 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Left Rear Radar (Aptiv SRR) 2022 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Right Rear Radar (Aptiv SRR) 2022 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2022 | Rear Camera | Camera | Static | YES | - | |
| Surround View (360° Camera) - Optional 2022 | Surround Camera | Camera | Static | YES | - | |
| PDC Sensors - Rear (Park Distance Control) 2022 | Parking Sensor | sensor | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2023 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR) 2023 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Left Rear Radar (Aptiv SRR) 2023 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Right Rear Radar (Aptiv SRR) 2023 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2023 | Rear Camera | Camera | Static | YES | - | |
| Surround View (360° Camera) - Optional 2023 | Surround Camera | Camera | Static | YES | - | |
| PDC Sensors - Rear (Park Distance Control) 2023 | Parking Sensor | sensor | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2024 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR) 2024 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Left Rear Radar (Aptiv SRR) 2024 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Right Rear Radar (Aptiv SRR) 2024 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2024 | Rear Camera | Camera | Static | YES | - | |
| Surround View (360° Camera) - Optional 2024 | Surround Camera | Camera | Static | YES | - | |
| PDC Sensors - Rear (Park Distance Control) 2024 | Parking Sensor | sensor | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2025 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR) 2025 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Left Rear Radar (Aptiv SRR) 2025 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Right Rear Radar (Aptiv SRR) 2025 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2025 | Rear Camera | Camera | Static | YES | - | |
| Surround View (360° Camera) - Optional 2025 | Surround Camera | Camera | Static | YES | - | |
| PDC Sensors - Rear (Park Distance Control) 2025 | Parking Sensor | sensor | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2026 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR) 2026 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Left Rear Radar (Aptiv SRR) 2026 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection - Right Rear Radar (Aptiv SRR) 2026 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2026 | Rear Camera | Camera | Static | YES | - | |
| Surround View (360° Camera) - Optional 2026 | Surround Camera | Camera | Static | YES | - | |
| PDC Sensors - Rear (Park Distance Control) 2026 | Parking Sensor | sensor | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement (if ADAS camera equipped) 2019 Affected: Forward Safety Camera, Forward Collision Warning, AEB, Adaptive Cruise
RAM 3500 2019: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Forward Camera Replacement Affected: Forward Camera, FCW, AEB, LDW, Adaptive Cruise
wiTECH ADAS initialization + static calibration. SGW authentication required. Same level-surface target procedure as windshield replacement.
Front Bumper Removal/Replacement 2019 Affected: Forward Radar (if equipped)
RAM 3500 2019: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
Blind Spot Sensor Replacement Affected: Blind Spot Monitoring, Rear Cross-Traffic Alert
Rear corner BSD sensors (one per side). wiTECH initialization after replacement. L/R not interchangeable. Verify BSD mirror warning and RCTA alerts. Available on Laramie/Longhorn/Limited on HD models.
BCM Replacement Affected: All vehicle systems
wiTECH 2.0 + TechAuthority (DealerConnect) required. SGW unlock via PDO subscription. PROXI alignment (BCM, TIPM, ECM, ORC, TCM must all be aligned). SKREEM key relearn. VIN tie programming.
ABS/ESC Module Replacement Affected: ABS, ESC, SAS, Trailer Sway Control
wiTECH module init + 4-wheel brake bleed + SAS zero-point calibration. Verify trailer sway control on tow-equipped units. Drive 25+ mph for SAS learning after calibration.
Steering Angle Sensor Replacement Affected: ESC, SAS
wiTECH SAS zero-point calibration on level surface, wheels straight-ahead. Verify ESC no DTCs after road test.
ORC (Occupant Restraint Controller) Replacement 2019 Affected: Airbag, Seatbelt Pretensioners
RAM 3500 2019: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Windshield Replacement (if ADAS camera equipped) 2020 Affected: Forward Safety Camera, Forward Collision Warning, AEB, Adaptive Cruise
RAM 3500 2020: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Front Bumper Removal/Replacement 2020 Affected: Forward Radar (if equipped)
RAM 3500 2020: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
ORC (Occupant Restraint Controller) Replacement 2020 Affected: Airbag, Seatbelt Pretensioners
RAM 3500 2020: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Windshield Replacement (if ADAS camera equipped) 2021 Affected: Forward Safety Camera, Forward Collision Warning, AEB, Adaptive Cruise
RAM 3500 2021: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Front Bumper Removal/Replacement 2021 Affected: Forward Radar (if equipped)
RAM 3500 2021: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
ORC (Occupant Restraint Controller) Replacement 2021 Affected: Airbag, Seatbelt Pretensioners
RAM 3500 2021: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Windshield Replacement (if ADAS camera equipped) 2022 Affected: Forward Safety Camera, Forward Collision Warning, AEB, Adaptive Cruise
RAM 3500 2022: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Front Bumper Removal/Replacement 2022 Affected: Forward Radar (if equipped)
RAM 3500 2022: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
ORC (Occupant Restraint Controller) Replacement 2022 Affected: Airbag, Seatbelt Pretensioners
RAM 3500 2022: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Windshield Replacement (if ADAS camera equipped) 2023 Affected: Forward Safety Camera, Forward Collision Warning, AEB, Adaptive Cruise
RAM 3500 2023: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Front Bumper Removal/Replacement 2023 Affected: Forward Radar (if equipped)
RAM 3500 2023: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
ORC (Occupant Restraint Controller) Replacement 2023 Affected: Airbag, Seatbelt Pretensioners
RAM 3500 2023: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Windshield Replacement (if ADAS camera equipped) 2024 Affected: Forward Safety Camera, Forward Collision Warning, AEB, Adaptive Cruise
RAM 3500 2024: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Front Bumper Removal/Replacement 2024 Affected: Forward Radar (if equipped)
RAM 3500 2024: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
ORC (Occupant Restraint Controller) Replacement 2024 Affected: Airbag, Seatbelt Pretensioners
RAM 3500 2024: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Windshield Replacement (if ADAS camera equipped) 2025 Affected: Forward Safety Camera, Forward Collision Warning, AEB, Adaptive Cruise
RAM 3500 2025: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Front Bumper Removal/Replacement 2025 Affected: Forward Radar (if equipped)
RAM 3500 2025: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
ORC (Occupant Restraint Controller) Replacement 2025 Affected: Airbag, Seatbelt Pretensioners
RAM 3500 2025: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Windshield Replacement (if ADAS camera equipped) 2026 Affected: Forward Safety Camera, Forward Collision Warning, AEB, Adaptive Cruise
RAM 3500 2026: Forward camera static + dynamic recalibration required via wiTECH ADAS module if windshield replaced. Level surface, ~25 ft target placement per wiTECH procedure. Verify FCW/AEB and Adaptive Cruise no active DTCs post-calibration. Not all 3500 trims equipped -- verify.
Front Bumper Removal/Replacement 2026 Affected: Forward Radar (if equipped)
RAM 3500 2026: Front radar realignment via wiTECH if front bumper removed. Verify Adaptive Cruise and AEB. HD models: front radar behind lower grille opening.
ORC (Occupant Restraint Controller) Replacement 2026 Affected: Airbag, Seatbelt Pretensioners
RAM 3500 2026: ORC REPLACE ONLY after hard airbag deployment. wiTECH will NOT allow crash data clear -- must replace ORC. PROXI alignment required post-install. VIN tie via wiTECH.
Module part numbers by generation
33 full part numbers across 34 module groups for this generation.
ABS modulator valve
-
68453771ACAnti-Lock Brakes
ABS modulator valve
-
68721933AAAnti-Lock Brakes
Antilock brake control module
-
68477878AFAnti-Lock Brakes
Antilock brake control module
-
68720652AAAnti-Lock Brakes
Body control module
-
68542778AGControls
Body control module
-
68583903AJControls
Blind spot control module
-
68598777AALane Departure Warning; Blind Spot; with LED tail lamps; includes sensors
Blind spot control module
-
68358104AFLane Departure Warning; Blind Spot; with LED tail lamps; includes sensors
Blind spot control module
-
68263397AELane Departure Warning; Blind Spot; without LED tail lamps; includes sensors
Engine control module
-
68363277AAPowertrain Control; ECM
Engine control module
-
68724457AAPowertrain Control; ECM
Front surround view camera
-
4672644AJParking Aid; Surround View; Front
Front surround view camera
-
68598780AAParking Aid; Surround View; Front
Front wheel speed sensor
-
68292886ACAnti-Lock Brakes
Side impact sensor
-
56038946ABSupplemental Restraint System; door
Side impact sensor
-
68598819AASupplemental Restraint System; door
Left rear wheel speed sensor
-
68646345ABAnti-Lock Brakes; with Dual Rear Wheels
Parking assist control module
-
68480723ADParking Aid; Park Assist; with front sensors
Parking assist control module
-
68600084AEParking Aid; Park Assist; with front sensors
Parking assist distance sensor
-
6MK25TZZAAParking Aid
Rear view camera
-
68643235ABParking Aid; Back Up; without Surround View; tailgate or rear frame
Rear view camera
-
4672735ADParking Aid; Back Up; with pickup box; without Surround View; at tailgate
Rear surround view camera
-
68417514AAParking Aid; Surround View; Rear
Right rear wheel speed sensor
-
68646344ABAnti-Lock Brakes; with Dual Rear Wheels
Side surround view camera
-
68417514AAParking Aid; Surround View; Side
Supplemental restraint control module
-
68742197AASupplemental Restraint System; Body Code D2; with Dual Rear Wheel; order by vehicle application
Supplemental restraint control module
-
68599750AESupplemental Restraint System; Body Code D2; without Dual Rear Wheel; order by vehicle application
Supplemental restraint control module
-
68599770ADSupplemental Restraint System; Body Code DD; order by vehicle application
Supplemental restraint control module
-
68399791ACSupplemental Restraint System; with Regular Cab
Supplemental restraint control module
-
68399792ACSupplemental Restraint System; without Regular Cab
Transmission control module
-
68446166AAAutomatic Transmission; 68RFE
Transfer case control module
-
68674979AFTransfer Case; with Electronic Locking Differential
Transfer case control module
-
68674980AFTransfer Case; without Electronic Locking Differential
Transfer case shift module assembly
-
68250127ACTransfer Case
2 gateway, immobilizer, and security items documented across the 2019-2026 generation.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Full-frame BOF; high-strength steel; dual rear wheel (DRW) available on 3500
- OBD Protocol
- ISO 15765-4 CAN (500 kbps); SGW bypass required for aftermarket tools
- CAN Architecture
- CAN-C + CAN-IHS + LIN; SGW on OBD port; OBD2 DLC ISO 15765-4 CAN 500kbps
- Infotainment
- Uconnect 5 (12" Laramie+) or Uconnect 4 (8.4" base); Apple CarPlay + Android Auto; wireless CarPlay Uconnect 5
- OTA Capable
- Yes
- Gateway Type
- Stellantis Secure Gateway (SGW)
- Gateway Bypass Method
- OEM wiTECH/authorized SGW access
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
WHAT WE RESOLVE
5th Gen D2 (2019-2026) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Camera (Mobileye EyeQ4) (2019), Forward Radar (Bosch MRR) (2019), Blind Spot Detection - Left Rear Radar (Aptiv SRR) (2019), and Blind Spot Detection - Right Rear Radar (Aptiv SRR) (2019). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve Occupant Restraint Controller (ORC) (2019) and Occupant Restraint Controller (ORC) (2020-2026). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Ram 3500 (2019-2026) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Ram 3500 (2019-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Ram 3500 (2019-2026)?
The Ram 3500 (2019-2026) generation currently shows 46 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include Occupant Restraint Controller (ORC) (2019) and Occupant Restraint Controller (ORC) (2020-2026). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 68399791AC (2019) - confirm for your exact year/VIN.
Does Ram 3500 (2019-2026) need ADAS calibration after glass or collision work?
The merged generation data documents 56 ADAS systems, including Forward Camera (Mobileye EyeQ4) (2019), Forward Radar (Bosch MRR) (2019), Blind Spot Detection - Left Rear Radar (Aptiv SRR) (2019), Blind Spot Detection - Right Rear Radar (Aptiv SRR) (2019), and Rear View Camera (RVC) (2019). Calibration triggers include Windshield Replacement (if ADAS camera equipped) (2019), Forward Camera Replacement, Front Bumper Removal/Replacement (2019), and Blind Spot Sensor Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Ram 3500 (2019-2026)?
Yes. The generation data includes 8 SRS records, including Occupant Restraint Controller (ORC) (2019) and Occupant Restraint Controller (ORC) (2020-2026). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 68399791AC (2019) - confirm for your exact year/VIN.
Do all Ram 3500 (2019-2026) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2019-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
How long does service take for Ram 3500 (2019-2026)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Is Ram 3500 (2019-2026) service mobile or mail-in?
Mobile service covers DFW on-vehicle diagnostics, post-repair coding, and supported module work. Mail-in module service is available nationwide. We confirm the active path for your exact year, VIN, module, and requested scope before service.
More 3500 generations
4th Gen D2 2011-2018 5th Gen D2 2019-2026 You are here
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
wiTECH 2.0 Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.