VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2025 Nissan Pathfinder Supported Services
2025 Nissan Pathfinder
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform R53 (5th Gen Pathfinder, 2022+) - 2024 continuation; all 2023 trims continue
- CAN Architecture Nissan CAN architecture (R53); OBD2 DLC ISO 15765-4 CAN 500kbps
- Security Nissan NATS5+ AES rolling code; no OBD pin extraction; AKL requires CONSULT-III Plus + DealerCONNECT dealer authorization; max 4 Intelligent Keys
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2025 Nissan Pathfinder. On this vehicle we cover documented systems include Safety Shield 360 / ProPilot Assist Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this R53 (5th Gen Pathfinder, 2022+) - 2024 continuation; all 2023 trims continue platform vehicle, NATS / I-Key immobilizer support, NissanConnect infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
R53 (5th Gen Pathfinder, 2022+) - 2024 continuation; all 2023 trims continue
Production
2013-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / 4WD
Engine
-
CAN Speed
Nissan CAN architecture (R53); OBD2 DLC ISO 15765-4 CAN 500kbps
YEAR-SPECIFIC NOTES
Infotainment
NissanConnect
Exact-year service summary for 2025 Nissan Pathfinder
ADAS coverage
This 2025 Nissan Pathfinder page documents 6 ADAS systems, including Safety Shield 360 / ProPilot Assist Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Forward Camera Replacement, Front Radar Replacement, and ECM Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 23 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 6 gateway, immobilizer, or key-security records for this 2025 Nissan Pathfinder.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2025 Nissan Pathfinder using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Safety Shield 360 standard all 2024 trims: Forward Emergency Braking, Blind Spot - Standard; Platform: R53 (5th Gen Pathfinder, 2022+) - Confirmed
Driver-assist suite
Safety Shield 360 standard all 2024 trims: Forward Emergency Braking, Blind Spot Warning, Rear Cross-Traffic Alert, Lane Departure Warning/Lane Departure Prevention, High Beam Assist, Rear Automatic Braking. ProPilot Assist optional SL; standard Platinum; available Rock Creek.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
Infotainment context
NissanConnect; 9" NissanConnect touchscreen standard; Apple CarPlay / Android Auto standard; SiriusXM; NissanConnect remote services; 12.3" dual-screen on Platinum
Network and access
CAN: Nissan CAN architecture (R53); OBD2 DLC ISO 15765-4 CAN 500kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2025 Nissan Pathfinder. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
1 module documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
7 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
2 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
15 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Safety Shield 360 standard all 2024 trims: Forward Emergency Braking, Blind Spot
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: R53 (5th Gen Pathfinder, 2022+)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Nissan Pathfinder issues we resolve on this platform: Safety Shield 360 / ProPilot Assist Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - R53 (5th Gen Pathfinder, 2022+) - 2024 continuation; all 2023 trims continue platform uses Nissan CAN architecture (R53); OBD2 DLC ISO 15765-4 CAN 500kbps.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Safety Shield 360 standard all 2024 trims: Forward Emergency Braking, Blind Spot Warning, Rear Cross-Traffic Alert, Lane Departure Warning/Lane Departure Prevention, High Beam Assist, Rear Automatic Braking. ProPilot Assist optional SL; standard Platinum; available Rock Creek.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Safety Shield 360 / ProPilot Assist Forward Camera (Monocular) | Camera | ADAS | Static | YES | 284A1-6RA0A (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Radar | ADAS | Static + Dynamic | YES | 28438-6RA0A (FRONT BUMPER CENTER - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) | Radar | ADAS | Static + Dynamic | YES | (R53 REAR BSD - VERIFY PN VIA OUR DIAGNOSTIC SOFTWARE | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS | Static + Dynamic | YES | (R53 REAR BSD - VERIFY PN VIA OUR DIAGNOSTIC SOFTWARE | |
| Park Distance Control (PDC) | Ultrasonic | ADAS | None | YES | (R53 ULTRASONIC SENSORS - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Backup Camera / Surround View Monitor | Camera | ADAS | Static | YES | (R53 CAMERA SYSTEM - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement
CONSULT static calibration REQUIRED. Rock Creek: follow CONSULT target placement exactly. ProPilot Assist equipped: dynamic cal also required - 50+ mph marked lane road. Verify all Safety Shield 360 DTC clear.
Forward Camera Replacement
Same static + dynamic (ProPilot) CONSULT procedure as windshield. PN: 284A1-6RA0A. Bracket seated before cal.
Front Radar Replacement
CONSULT radar alignment. Bumper fully reinstalled. Verify FEB and ProPilot adaptive cruise DTC clear.
ECM Replacement
CONSULT programming + VIN + NATS5+ sync. Throttle + idle relearn. Verify AWD/Rock Creek suffix. NATS lamp out before test drive.
ABS / ESC Replacement
CONSULT brake bleed + SAS zero-point. Level road for Rock Creek. Verify RAB function.
Intelligent Key ECU Replacement
DealerCONNECT auth. All keys present. CONSULT registration. Max 4 keys.
SAS Zero-Point / Post-Alignment
CONSULT SAS reset + straight drive 25+ mph on level pavement. Rock Creek: level pavement only.
SWS Sensor Replacement
CONSULT SWS initialization. Verify all sensor positions. Rock Creek: skid plate cleared.
EPS Replacement
CONSULT EPS init + torque cal, steering centered. Verify ProPilot Assist steering function.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using CONSULT-III+.
Front Bumper Repair or Replacement
Forward radar angular alignment required after front bumper R&R. Use CONSULT-III+.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using CONSULT-III+.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use CONSULT-III+.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using CONSULT-III+.
Mirror Replacement
Surround view mirror camera recalibration required after mirror R&R. Use CONSULT-III+.
SRS Modules
SRS Control Unit 7 records
Under center console
- Part number
- 98820-1A68A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
- Part number
- 98820-9PV8A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
- Part number
- 98510-6TA9C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
- Part number
- 98515-6TB8A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
- Part number
- 985R0-6TA9A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
- Part number
- 985P0-6TA8A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
- Part number
- 985P1-6TA8A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU Modules
ECM - 3.5L VQ38DD 237101-6SA0A (VERIFY AWD
- Part number
- 237101-6SA0A (VERIFY AWD
- Notes
- CONSULT ECM programming (Programming Port) + VIN + NATS5+ IMMO sync. Throttle + idle relearn after replacement. Verify FWD vs AWD suffix. NATS lamp out before test drive. Check VVEL oil pressure DTC after replacement.
TCM - Xtronic CVT (RE0F10C) (R53 CVT TCM - VERIFY VIA CONSULT
- Part number
- (R53 CVT TCM - VERIFY VIA CONSULT
- Notes
- CONSULT CVT adaptive reset. Nissan Matic-S fluid only. Fluid level check via CONSULT at 35-45°C. 100+ miles for full adaptation.
Electric Power Steering Control Unit (EPS) (R53 EPS - VERIFY VIA CONSULT
- Part number
- (R53 EPS - VERIFY VIA CONSULT
- Notes
- CONSULT EPS init + torque sensor cal, steering centered, vehicle level. Verify ProPilot Assist steering function on equipped trims.
Surround View Monitor Control Unit (R53 SVM - VERIFY VIA CONSULT
- Part number
- (R53 SVM - VERIFY VIA CONSULT
- Notes
- CONSULT 4-camera mat calibration after SVM replacement. Mat dimensions per WSM. Verify all 4 surround view zones.
BCM Modules
Body Control Module (BCM) 284B1-6RA0A (VERIFY VIA CONSULT
- Part number
- 284B1-6RA0A (VERIFY VIA CONSULT
- Notes
- CONSULT BCM coding + VIN registration after replacement. Verify FWD vs AWD/Rock Creek variant PN via ASIST. All body functions verified via CONSULT post-replacement.
Intelligent Key ECU 285E3-6RA0A (VERIFY VIA CONSULT
- Part number
- 285E3-6RA0A (VERIFY VIA CONSULT
- Notes
- CONSULT + DealerCONNECT auth for replacement. All keys erased. Max 4 I-Keys. Key registration + NATS/BCM sync. Verify push-button start and all remote functions.
TPMS Control Unit (R53 TPMS - VERIFY VIA CONSULT
- Part number
- (R53 TPMS - VERIFY VIA CONSULT
- Notes
- CONSULT TPMS sensor registration after replacement or new sensors. Rock Creek: register sensor IDs after AT tire service. Verify all 4 positions report and no TPMS warning.
TCU / TCM Transmission Modules
TCU - CVT8 Continuously Variable Transmission 31036
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires CVT relearn procedure, NS-3 CVT fluid, CONSULT III+ tool for adaptation
ABS / Brake Modules
ABS/ESC Control Unit 47660-6RA0A (VERIFY VIA CONSULT
- Part number
- 47660-6RA0A (VERIFY VIA CONSULT
- Notes
- CONSULT ABS initialization + brake bleed after replacement. SAS zero-point: CONSULT reset + straight drive 25+ mph on level road. Rock Creek: level pavement only for SAS cal. Verify RAB function after ESC replacement.
Wheel Speed Sensors (all four) (R53 WSS - VERIFY EACH CORNER PN VIA CONSULT
- Part number
- (R53 WSS - VERIFY EACH CORNER PN VIA CONSULT
- Notes
- Active magnetic sensors. CONSULT DTC clear + road test 15+ mph. Rock Creek: verify WSS harness routing clears suspension lift and larger tire clearance through full suspension travel.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 24810-6SA1A
- Part number
- 24810-6SA1A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (spiral cable 25554 family)
Connectivity & Accessories
Safety Shield 360 Camera Calibration (Static)
- Notes
- CONSULT static calibration after windshield R&R or camera replacement. Follow CONSULT on-screen target placement. Verify all Safety Shield 360 DTC clear. Rock Creek: use CONSULT guidance, not estimated distance.
ProPilot Assist Calibration (Static + Dynamic)
- Notes
- Static then dynamic CONSULT calibration. Dynamic: highway drive 50+ mph on marked lane road. ProPilot will not activate until both complete.
SWS Calibration Post-Bumper Work
- Notes
- CONSULT SWS initialization after sensor replacement or bumper removal. Verify all sensor positions active. No metallic obstructions in FOV.
NissanConnect Remote Services (TELEMATICS UNIT R53 2024 - VERIFY VIA CONSULT)
- Part number
- (TELEMATICS UNIT R53 2024 - VERIFY VIA CONSULT)
- Notes
- NissanConnect via MyNissan app. Remote lock/unlock, start, locate. Dealer activation via ASIST. Verify after head unit or telematics module replacement.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- R53 Unibody - Advanced High-Strength Steel (AHSS); Rock Creek: 2" lift + skid plates
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Nissan CAN architecture (R53); OBD2 DLC ISO 15765-4 CAN 500kbps
- Infotainment
- 9" NissanConnect touchscreen standard; Apple CarPlay / Android Auto standard; SiriusXM; NissanConnect remote services; 12.3" dual-screen on Platinum
- OTA Capable
- No
- Infotainment Name
- NissanConnect
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2025 - 2.5L dCi (YD25DDTi).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. Pathfinder not ported.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2025 Nissan Pathfinder?
ADAS calibration pricing for a 2025 Nissan Pathfinder depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Safety Shield 360 / ProPilot Assist Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Park Distance Control (PDC). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2025 Nissan Pathfinder?
Yes. The 2025 Nissan Pathfinder uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 98820-1A68A. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2025 Nissan Pathfinder?
After windshield replacement on a 2025 Nissan Pathfinder, Safety Shield 360 / ProPilot Assist Forward Camera (Monocular), Forward Radar (77GHz), and Backup Camera / Surround View Monitor rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2025 Nissan Pathfinder module service take?
Most 2025 Nissan Pathfinder onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 20 programmable modules documented in our database (4 ECU, 3 BCM, 1 TCU, 2 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2025 Nissan Pathfinder on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2025 Nissan Pathfinder. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2025 Nissan Pathfinder programming?
Every programming, cloning, and calibration job on the 2025 Nissan Pathfinder is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2025 Nissan Pathfinder can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2025 Nissan Pathfinder. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 2 ABS / brake control (EBCM)
- 3 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Infotainment on this platform: NissanConnect. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2025 Nissan Pathfinder covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 284A1-6RA0A, 28438-6RA0A
- ECU / PCM Part Numbers
- 237101-6SA0A
- BCM / Body Module Part Numbers
- 284B1-6RA0A (VERIFY VIA CONSULT, 285E3-6RA0A (VERIFY VIA CONSULT, (R53 TPMS - VERIFY VIA CONSULT
- TCU / TCM Part Numbers
- 31036
- SRS / Airbag Module Part Numbers
- 98820-1A68A, 98820-9PV8A, 98510-6TA9C, 98515-6TB8A, 985R0-6TA9A, 985P0-6TA8A, 985P1-6TA8A
- ABS / EBCM Part Numbers
- 47660-6TA0A, PATHFINDER R53
- Instrument Cluster (IPC) Part Numbers
- 24810-6SA1A
- Transmission Control Module (TCM) Part Numbers
- 31036
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (SPIRAL CABLE 25554 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2025 Nissan Pathfinder
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.