VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2022 Nissan Pathfinder Supported Services
2022 Nissan Pathfinder
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform R53 (5th Gen Pathfinder, 2022+) - Nissan D Platform Unibody FWD/AWD
- CAN Architecture Nissan CAN architecture (R53); OBD2 DLC ISO 15765-4 CAN 500kbps
- Security Nissan NATS5+ AES rolling code; no OBD pin extraction; AKL requires CONSULT-III Plus + DealerCONNECT dealer authorization; max 4 Intelligent Keys
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2022 Nissan Pathfinder. On this vehicle we cover documented systems include Safety Shield 360 / ProPilot Assist Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this R53 (5th Gen Pathfinder, 2022+) - Nissan D Platform Unibody FWD/AWD platform vehicle, Nissan NATS5+ (AES rolling code, R53 Pathfinder 2022) immobilizer support, NissanConnect infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
R53 (5th Gen Pathfinder, 2022+) - Nissan D Platform Unibody FWD/AWD
Production
2013-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / 4WD
Engine
-
CAN Speed
Nissan CAN architecture (R53); OBD2 DLC ISO 15765-4 CAN 500kbps
YEAR-SPECIFIC NOTES
Infotainment
NissanConnect
Exact-year service summary for 2022 Nissan Pathfinder
ADAS coverage
This 2022 Nissan Pathfinder page documents 6 ADAS systems, including Safety Shield 360 / ProPilot Assist Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Forward Camera Replacement, Front Radar Replacement, and ECM Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 23 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 6 gateway, immobilizer, or key-security records for this 2022 Nissan Pathfinder.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2022 Nissan Pathfinder using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Safety Shield 360 standard all 2022 trims: Forward Emergency Braking (pedestrian - Standard; Platform: R53 (5th Gen Pathfinder, 2022+) - Confirmed
Driver-assist suite
Safety Shield 360 standard all 2022 trims: Forward Emergency Braking (pedestrian/cyclist), Blind Spot Warning, Rear Cross Traffic Alert, Lane Departure Warning/Lane Departure Prevention, High Beam Assist, Rear Automatic Braking. ProPilot Assist optional on SL; standard on Platinum - hands-on highway steering assist + adaptive cruise + lane centering.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
Infotainment context
NissanConnect; 9" NissanConnect touchscreen standard; Apple CarPlay / Android Auto standard; SiriusXM; NissanConnect remote services on equipped trims; 12.3" dual-screen available on Platinum
Network and access
CAN: Nissan CAN architecture (R53); OBD2 DLC ISO 15765-4 CAN 500kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2022 Nissan Pathfinder. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
1 module documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
3 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
1 module documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
5 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
5 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
15 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Safety Shield 360 standard all 2022 trims: Forward Emergency Braking (pedestrian
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: R53 (5th Gen Pathfinder, 2022+)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Nissan Pathfinder issues we resolve on this platform: Safety Shield 360 / ProPilot Assist Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - R53 (5th Gen Pathfinder, 2022+) - Nissan D Platform Unibody FWD/AWD platform uses Nissan CAN architecture (R53); OBD2 DLC ISO 15765-4 CAN 500kbps.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Safety Shield 360 standard all 2022 trims: Forward Emergency Braking (pedestrian/cyclist), Blind Spot Warning, Rear Cross Traffic Alert, Lane Departure Warning/Lane Departure Prevention, High Beam Assist, Rear Automatic Braking. ProPilot Assist optional on SL; standard on Platinum - hands-on highway steering assist + adaptive cruise + lane centering.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Safety Shield 360 / ProPilot Assist Forward Camera (Monocular) | Camera | ADAS | Static | YES | 284A1-6RA0A (WINDSHIELD-MOUNTED MONOCULAR - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Radar | ADAS | Static + Dynamic | YES | 28438-6RA0A (FRONT BUMPER CENTER - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) | Radar | ADAS | Static + Dynamic | YES | (R53 REAR BSD - VERIFY PN VIA OUR DIAGNOSTIC SOFTWARE | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS | Static + Dynamic | YES | (R53 REAR BSD - VERIFY PN VIA OUR DIAGNOSTIC SOFTWARE | |
| Park Distance Control (PDC) | Ultrasonic | ADAS | None | YES | (R53 ULTRASONIC SENSORS - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Backup Camera / 360-Degree Surround View | Camera | ADAS | Static | YES | (R53 BACKUP |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement
CONSULT-III Plus forward camera STATIC calibration REQUIRED after any windshield R&R on R53 Pathfinder. Vehicle on level surface, all tires properly inflated. WSM target positioned per CONSULT on-screen guidance (approx 3m from front center). Clear all objects from forward camera FOV. For ProPilot Assist-equipped vehicles (SL/Platinum): DYNAMIC calibration also required - CONSULT guided highway drive at 50+ mph on marked lane road immediately after static. Verify all Safety Shield 360 DTC clear. ProPilot Assist indicator must be active before returning vehicle.
Forward Camera Replacement
Same static (+ dynamic on ProPilot Assist vehicles) CONSULT calibration as windshield procedure. Confirm camera PN via ASIST (284A1-6RA0A R53). Camera bracket must be fully seated and torqued to WSM spec before initiating calibration. CONSULT guides through initialization and both calibration stages.
Front Radar Replacement
CONSULT-III Plus radar alignment after radar replacement or significant front-end collision. Bumper cover and all bumper fascia components must be fully reinstalled and secured before final calibration. Vehicle on level surface. No metallic obstructions within radar FOV. Verify Forward Emergency Braking and adaptive cruise (ProPilot) DTC all clear after calibration.
ECM Replacement
CONSULT-III Plus ECM programming via Programming Port + VIN registration + NATS5+ IMMO sync with Intelligent Key ECU. Throttle valve closed position learning + idle air volume learning required via CONSULT after replacement. Verify FWD vs AWD ECM part number (237101-6SA0A base - suffix varies). NATS indicator must extinguish at key-on before test drive - confirms IMMO sync complete.
ABS / ESC Unit Replacement
CONSULT-III Plus ABS initialization + automated brake bleed after unit replacement on R53. SAS (Steering Angle Sensor) zero-point calibration REQUIRED: CONSULT SAS reset function + drive straight at 25+ mph on level road. Verify brake pedal firm (no spongy feel after bleed). Confirm Safety Shield 360 RAB (Rear Automatic Braking) operational via CONSULT DTC check.
Intelligent Key ECU Replacement
DealerCONNECT dealer authorization required before any work begins. All customer Intelligent Keys must be physically present. CONSULT-III Plus key registration - all prior keys permanently erased. Program all new/existing keys. Verify push-button start, remote lock/unlock, remote start (if equipped) with each key. Maximum 4 keys. NATS5+ + ECM synchronization via CONSULT.
SAS Zero-Point / Post-Alignment
After any wheel alignment or steering component replacement: CONSULT-III Plus SAS (Steering Angle Sensor) zero-point reset. Drive straight at 25+ mph on level road to complete initialization. Required for correct ESC/VDC operation, Safety Shield 360 lane functions, and ProPilot Assist lane centering accuracy.
Sonar Warning System (SWS) Sensor Replacement
CONSULT-III Plus SWS initialization after any ultrasonic sensor replacement or bumper removal/reinstall on R53. Verify all sensor positions active via CONSULT SWS live data screen. Confirm proximity alert tones function at low speed. No SWS DTC before returning vehicle.
EPS Control Unit Replacement
CONSULT-III Plus EPS initialization + torque sensor calibration on level surface with steering wheel centered. Verify no EPS DTC. For ProPilot Assist vehicles: verify lane centering torque assist function after EPS replacement - ProPilot uses EPS actuator for steering corrections.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using CONSULT-III+.
Front Bumper Repair or Replacement
Forward radar angular alignment required after front bumper R&R. Use CONSULT-III+.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using CONSULT-III+.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use CONSULT-III+.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using CONSULT-III+.
Mirror Replacement
Surround view mirror camera recalibration required after mirror R&R. Use CONSULT-III+.
SRS Modules
SRS Control Unit 985109PA8A
- Part number
- 985109PA8A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU Modules
ECM - 3.5L VQ38DD 237101-6SA0A (VERIFY AWD
- Part number
- 237101-6SA0A (VERIFY AWD
- Notes
- CONSULT-III Plus ECM programming (Programming Port) + VIN registration + NATS5+ IMMO sync with Intelligent Key ECU after replacement. VQ38DD is a naturally aspirated V6 - no boost control ECM parameters. Throttle valve closed position learn + idle air volume learn via CONSULT after replacement. Check for any VQ38DD VVEL (Variable Valve Event and Lift) or oil pressure DTC after replacement.
TCM - Xtronic CVT (RE0F10C) (R53 CVT TCM - VERIFY VIA CONSULT
- Part number
- (R53 CVT TCM - VERIFY VIA CONSULT
- Notes
- CONSULT-III Plus CVT adaptive data reset after TCM replacement on R53. Nissan Matic-S CVT fluid only - do NOT use Matic-J, Matic-X, or aftermarket substitutes. CVT fluid level check via CONSULT oil temperature monitoring (target 35-45°C for accurate level). Full CVT shift adaptation learning requires approximately 100+ miles of varied driving after adaptive reset. Monitor for CVT temp DTC or slip codes after replacement.
Electric Power Steering Control Unit (EPS) (R53 EPS - VERIFY VIA CONSULT
- Part number
- (R53 EPS - VERIFY VIA CONSULT
- Notes
- CONSULT-III Plus EPS initialization + steering angle/torque sensor calibration after EPS replacement. Vehicle on level surface, steering wheel centered. Verify no EPS DTC. ProPilot Assist uses EPS torque actuator for lane centering - verify ProPilot steering function after EPS replacement and full calibration on SL/Platinum.
Surround View Monitor / Around View Control Unit (R53 AVM
- Part number
- (R53 AVM
- Notes
- CONSULT-III Plus AVM/Surround View calibration after control unit replacement. Calibration mat procedure required - all 4 camera positions calibrated simultaneously on defined-dimension mat pattern. Follow WSM mat dimensions precisely. Verify all camera views display correctly in all 4 zones before returning vehicle.
BCM Modules
Body Control Module (BCM) 284B1-6RA0A (VERIFY VIA CONSULT
- Part number
- 284B1-6RA0A (VERIFY VIA CONSULT
- Notes
- CONSULT-III Plus BCM coding and VIN registration after replacement on R53 Pathfinder. BCM controls exterior/interior lighting, power windows, door locks, TPMS display, horn, wipers, remote start logic, and power liftgate. Verify all body function outputs via CONSULT after replacement.
Intelligent Key ECU 285E3-6RA0A (I-KEY - VERIFY VIA CONSULT
- Part number
- 285E3-6RA0A (I-KEY - VERIFY VIA CONSULT
- Notes
- NATS5+ Intelligent Key controller on R53. CONSULT-III Plus + DealerCONNECT dealer authorization required for replacement and key re-registration. All prior keys erased on new unit. Maximum 4 Intelligent Keys per vehicle. CONSULT key programming + BCM sync after replacement. Verify push-button start, remote lock/unlock, and remote start (if equipped) with all new keys.
TPMS Control Unit (R53 TPMS - VERIFY VIA CONSULT
- Part number
- (R53 TPMS - VERIFY VIA CONSULT
- Notes
- CONSULT-III Plus TPMS sensor ID registration after unit replacement or new wheel/tire sensors. Position learning via CONSULT. Verify TPMS warning lamp extinguishes and all sensor IDs register correctly.
TCU / TCM Transmission Modules
TCU - CVT8 Continuously Variable 31036-5AA0
- Part number
- 31036-5AA0
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH72543
- Notes
- CVT relearn via CONSULT III+, NS-3 fluid required, throttle position learning mandatory
TCU - CVT-8 Continuously Variable Transmission 31036
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH72xx
- Notes
- CVT relearn required after programming. Nissan CONSULT III+ tool mandatory. Use NS-3 CVT fluid. VIN coding essential.
TCU - 9G-TRONIC 9-Speed Auto 31036
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental MPC5777
- Notes
- Adaptation values reset after TCU replacement. Mercedes 9G-TRONIC variant. Requires proper ATF specification MB 236.17.
ABS / Brake Modules
ABS/ESC Control Unit 47660-6RA0A (VERIFY VIA CONSULT
- Part number
- 47660-6RA0A (VERIFY VIA CONSULT
- Notes
- Bosch or Hitachi ABS/ESC unit on R53 - verify manufacturer via CONSULT part ID before ordering. CONSULT-III Plus ABS initialization after replacement. Automated brake bleed via CONSULT preferred over manual. SAS (Steering Angle Sensor) zero-point calibration required after any alignment work or ABS/ESC unit replacement: CONSULT SAS reset + drive straight at 25+ mph on level road. Safety Shield 360 Rear Automatic Braking (RAB) shares ESC logic - verify RAB function post-replacement via CONSULT DTC check and road test.
Wheel Speed Sensor - Front Left (R53 WSS FL - VERIFY VIA CONSULT
- Part number
- (R53 WSS FL - VERIFY VIA CONSULT
- Notes
- Active magnetic wheel speed sensor, front left knuckle. Verify harness routing not pinched at steering knuckle through full steering sweep.
Wheel Speed Sensor - Front Right (R53 WSS FR - VERIFY VIA CONSULT
- Part number
- (R53 WSS FR - VERIFY VIA CONSULT
- Notes
- Front right WSS. Same procedure as front left.
Wheel Speed Sensor - Rear Left (R53 WSS RL - VERIFY VIA CONSULT
- Part number
- (R53 WSS RL - VERIFY VIA CONSULT
- Notes
- Rear left WSS. CONSULT DTC clear + road test.
Wheel Speed Sensor - Rear Right (R53 WSS RR - VERIFY VIA CONSULT
- Part number
- (R53 WSS RR - VERIFY VIA CONSULT
- Notes
- Rear right WSS. Same as rear left procedure.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 24810-6SA1A
- Part number
- 24810-6SA1A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (spiral cable 25554 family)
Connectivity & Accessories
Safety Shield 360 Camera Calibration (Static)
- Notes
- CONSULT-III Plus guided static calibration REQUIRED after windshield R&R or forward camera replacement on any R53 Pathfinder. Vehicle on level surface. WSM target positioned per CONSULT on-screen guidance (approx 3m from vehicle front center). Clear all objects from forward camera FOV. Verify all Safety Shield 360 DTC clear: Forward Emergency Braking, LDW, LDP, High Beam Assist. Road test - Safety Shield 360 system indicator extinguishes when all systems active and calibrated.
ProPilot Assist Calibration (Static + Dynamic)
- Notes
- ProPilot Assist on SL/Platinum R53 requires TWO calibration stages after windshield R&R or camera replacement: (1) Static calibration - same CONSULT guided procedure as Safety Shield 360 static above. (2) Dynamic calibration - CONSULT-III Plus guided highway drive at approximately 50+ mph on clearly marked lane road. ProPilot Assist WILL NOT activate until both static and dynamic calibration complete successfully.
Sonar Warning System (SWS) Calibration
- Notes
- CONSULT-III Plus required for SWS (parking sonar) sensor initialization after sensor replacement or front/rear bumper removal on R53. CONSULT SWS system check: verify all active ultrasonic sensor positions reporting correctly.
NissanConnect Remote Services (TELEMATICS UNIT R53 - VERIFY VIA CONSULT)
- Part number
- (TELEMATICS UNIT R53 - VERIFY VIA CONSULT)
- Notes
- NissanConnect remote services via MyNissan app on R53. Remote lock/unlock, remote start (equipped trims), vehicle locate. Dealer activation via Nissan ASIST. Verify connectivity after head unit or telematics module replacement.
Power Liftgate Control (R53 POWER LIFTGATE - VERIFY VIA CONSULT
- Part number
- (R53 POWER LIFTGATE - VERIFY VIA CONSULT
- Notes
- Available on SL/Platinum. CONSULT-III Plus liftgate height memory re-initialization after control unit replacement. Verify auto-open height memory positions save correctly.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- R53 Unibody - Advanced High-Strength Steel (AHSS)
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Nissan CAN architecture (R53); OBD2 DLC ISO 15765-4 CAN 500kbps
- Infotainment
- 9" NissanConnect touchscreen standard; Apple CarPlay / Android Auto standard; SiriusXM; NissanConnect remote services on equipped trims; 12.3" dual-screen available on Platinum
- OTA Capable
- No
- Infotainment Name
- NissanConnect
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2022 - 2.5L dCi (YD25DDTi).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. Pathfinder not ported.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2022 Nissan Pathfinder?
ADAS calibration pricing for a 2022 Nissan Pathfinder depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Safety Shield 360 / ProPilot Assist Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Park Distance Control (PDC). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2022 Nissan Pathfinder?
Yes. The 2022 Nissan Pathfinder uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 985109PA8A. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2022 Nissan Pathfinder?
After windshield replacement on a 2022 Nissan Pathfinder, Safety Shield 360 / ProPilot Assist Forward Camera (Monocular), Forward Radar (77GHz), and Backup Camera / 360-Degree Surround View rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2022 Nissan Pathfinder module service take?
Most 2022 Nissan Pathfinder onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 26 programmable modules documented in our database (4 ECU, 3 BCM, 3 TCU, 5 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2022 Nissan Pathfinder on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2022 Nissan Pathfinder. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2022 Nissan Pathfinder programming?
Every programming, cloning, and calibration job on the 2022 Nissan Pathfinder is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2022 Nissan Pathfinder can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2022 Nissan Pathfinder. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 3 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 5 ABS / brake control (EBCM)
- 3 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Infotainment on this platform: NissanConnect. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2022 Nissan Pathfinder covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 284A1-6RA0A, 28438-6RA0A
- ECU / PCM Part Numbers
- 237101-6SA0A
- BCM / Body Module Part Numbers
- 284B1-6RA0A (VERIFY VIA CONSULT, 285E3-6RA0A (I-KEY - VERIFY VIA CONSULT, (R53 TPMS - VERIFY VIA CONSULT
- TCU / TCM Part Numbers
- 31036-5AA0, 31036
- SRS / Airbag Module Part Numbers
- 985109PA8A
- ABS / EBCM Part Numbers
- 47660-6TA0A, PATHFINDER R53 5TH GEN (2022 REDESIGN
- Instrument Cluster (IPC) Part Numbers
- 24810-6SA1A
- Transmission Control Module (TCM) Part Numbers
- 31036-5AA0, 31036
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (SPIRAL CABLE 25554 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2022 Nissan Pathfinder
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.