Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2017 Nissan Leaf Supported Services

2017 Nissan Leaf

ADAS calibration, module programming, and security relearns

S, SV, SL trims. ZE0/AZE0 platform. 24 kWh battery (30 kWh SV/SL option from 2016).

Technical snapshot
  • Platform LEAF ZE0/AZE0 generation; verify exact build by VIN
  • CAN Architecture HS-CAN (500 kbps); Nissan EV CAN; OBD2 DLC Pin 6/14
  • Security Nissan Intelligent Key (PEPS); rolling code; CONSULT III Plus programmed

What do you need fixed?

Choose a service to start your quote.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2017 Nissan Leaf. On this vehicle we cover documented systems include Forward camera / lane camera - if equipped, Forward radar / distance sensor - if equipped, and Blind-spot, sonar, around-view, and parking-camera systems - if equipped, this LEAF ZE0/AZE0 generation; verify exact build by VIN platform vehicle, Nissan IMMU Gen 2-3; EV-specific immobilizer with VCM immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.

Platform
LEAF ZE0/AZE0 generation; verify exact build by VIN
Production
2011-present
Trim Levels
S, SV, SL trims. ZE0/AZE0 platform. 24 kWh battery (30 kWh SV/SL option from 2016).
Drivetrain
FWD
Engine
-
CAN Speed
HS-CAN (500 kbps); Nissan EV CAN; OBD2 DLC Pin 6/14
SERVICE SNAPSHOT

Exact-year service summary for 2017 Nissan Leaf

ADAS coverage

This 2017 Nissan Leaf page documents 3 ADAS systems, including Forward camera / lane camera - if equipped, Forward radar / distance sensor - if equipped, and Blind-spot, sonar, around-view, and parking-camera systems - if equipped.

View ADAS data

Calibration triggers

Documented calibration triggers include Windshield or forward-camera replacement, Front bumper, grille, or radar service, BCM/IPDM, key, or immobilizer module replacement, and ABS/VDC, steering-angle, or suspension service. Use the ADAS tab for the full trigger list.

View triggers

Programmable modules

This page indexes 21 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

This page includes 3 gateway, immobilizer, or key-security records for this 2017 Nissan Leaf.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2017 Nissan Leaf using the documented systems and module data on this page.

Choose a section
EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Basic: Rear view camera only (2011-2018) - Available; Platform: Nissan EV platform (Gen 1: 2011-2017 - Confirmed

Driver-assist suite

Basic: Rear view camera only (2011-2018)

Infotainment context

7" NissanConnect EV touchscreen

Network and access

CAN: HS-CAN (500 kbps); Nissan EV CAN; OBD2 DLC Pin 6/14

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Nissan CONSULT-III Plus

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2017 Nissan Leaf. Counts reflect modules our techs have programmed or calibrated on this exact platform.

ADAS Calibration
3 modules documented

Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.

Open ADAS tab
Engine / ECU Programming
1 module documented

Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.

Open Modules tab
BCM / Body Programming
3 modules documented

Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.

Open Modules tab
Gateway / Security Access
1 module documented

Secure gateway module identification, bypass workflow and security-access planning before programming.

Open Security tab
TCU / Transmission
2 modules documented

Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.

Open Modules tab
SRS / Airbag Reset
5 modules documented

Crash-data clear, hard-code reset and replacement airbag module configuration.

Open Modules tab
ABS / Brake Module
3 modules documented

ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.

Open Modules tab
IPC, SAS & Other Modules
3 modules documented

Instrument cluster cloning, steering angle sensor calibration and other supporting modules.

Open Modules tab
Connectivity & Accessories
4 modules documented

Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.

Open Modules tab
Recalibration Triggers
4 modules documented

Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.

Open ADAS tab

Need something not listed? Most undocumented modules can still be programmed.

Get a Quote
Feature availability 2

Basic: Rear view camera only (2011-2018)

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

Platform: Nissan EV platform (Gen 1: 2011-2017

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Nissan Leaf issues we resolve on this platform: Forward camera / lane camera - if equipped, Forward radar / distance sensor - if equipped, and Blind-spot, sonar, around-view, and parking-camera systems - if equipped recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - LEAF ZE0/AZE0 generation; verify exact build by VIN platform uses HS-CAN (500 kbps); Nissan EV CAN; OBD2 DLC Pin 6/14.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Basic: Rear view camera only (2011-2018)

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Forward camera / lane camera - if equippedForward Camera-Static or dynamic per Nissan service information YES-
Forward radar / distance sensor - if equippedRadar-Static or dynamic per Nissan service information YES-
Blind-spot, sonar, around-view, and parking-camera systems - if equippedParking / Blind Spot / Camera-Initialization and calibration per Nissan service information YES-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

Windshield or forward-camera replacement Affected: Forward camera/lane camera, AEB/LDW/ICC systems if equipped

Verify camera presence and run the Nissan alignment routine for the exact VIN after glass, camera, bracket, or related trim work.

Front bumper, grille, or radar service Affected: Forward radar, ICC/AEB, sonar, parking sensors if equipped

Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.

BCM/IPDM, key, or immobilizer module replacement Affected: BCM, IPDM, NATS/NVIS, Intelligent Key, RKE, alarm

Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.

ABS/VDC, steering-angle, or suspension service Affected: ABS/VDC, steering angle, yaw/lateral sensors, ADAS aim if equipped

Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.

SRS Modules

SRS Control Unit 988205SA9D
Part number
988205SA9D
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit 985156WK8A
Part number
985156WK8A
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit 985105SA8A
Part number
985105SA8A
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit 988205SR9C
Part number
988205SR9C
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit 988206WK9C
Part number
988206WK9C
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.

ECU Modules

ECM / PCM - Nissan powertrain, VIN-specific
Protocol / method
CONSULT/ASIST programming per service information
Coding required
Yes
Cloning supported
Yes
Notes
Verify engine, transmission, emissions calibration, and module suffix by VIN. Perform VIN registration, idle/throttle learns, and NATS/NVIS sync as required.

BCM Modules

Body Control Module (BCM) ~(VERIFY VIA CONSULT FOR LEAF 2017 ZE0, AZE0 (GEN 1))
Part number
~(VERIFY VIA CONSULT FOR LEAF 2017 ZE0, AZE0 (GEN 1))
Notes
CONSULT-III Plus required for BCM programming. LEAF ZE0/AZE0 (Gen 1) BCM integrates with EV-specific systems including charge port lock, HV interlock, and VCM communication. VIN registration and option code programming required after replacement. Verify all body functions and CAN bus communication post-programming.
Intelligent Key ECU (NATS) ~(VERIFY VIA CONSULT FOR LEAF 2017)
Part number
~(VERIFY VIA CONSULT FOR LEAF 2017)
Notes
CONSULT-III Plus + ASIST for NATS Intelligent Key ECU replacement. EV-specific: verify HV interlock and drive enable signal after programming. All keys erased on replacement. Maximum 4 keys. Verify push-button start.
Charge Port / EV Body Control
Notes
CONSULT EV diagnostics required after charge port assembly replacement. Verify AC Level 1/2 and CHAdeMO (if equipped) charge communication. Check HV interlock status and VCM-BCM handshake after any high-voltage area repair.

TCU / TCM Transmission Modules

N/A - Single Speed / No TCU
Protocol / method
Virgin Flash
Coding required
No
Cloning supported
No
Chip / MCU
N/A
Notes
Pure electric vehicle with single-speed reduction gear, no traditional TCU/TCM present
N/A - Single Speed / No TCU
Protocol / method
Virgin
Coding required
No
Cloning supported
No
Chip / MCU
N/A
Notes
Pure electric vehicle with single-speed reduction gear, no traditional TCU/TCM present

ABS / Brake Modules

ABS Actuator and Electric Unit (Control Unit)
Notes
Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each)
Notes
Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each)
Notes
Active sensor.

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) 24810-3NF2A
Part number
24810-3NF2A
Cloning supported
Yes
Notes
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
cross-year extension)

Connectivity & Accessories

7" NissanConnect EV touchscreen
Notes
Programming required after replacement. Verify software version compatibility before install.
Remote Start
Notes
Factory remote start. BCM configuration required after replacement on equipped vehicles.
HV Battery Management System
Notes
High-voltage safety protocols required. De-energize HV system before any service. Manufacturer scan tool required for HV diagnostics.
Onboard Charger Module
Notes
L1/L2 AC charging module. Programming required after replacement to restore charge profiles.

Gateway / Security Modules

Central Gateway Module
Manufacturer
NXP / Freescale
Security
VIN-locked (UDS)
VIN locked
Yes
Coding required
Yes
Chip / MCU
MPC5606BK
Notes
Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
High-strength steel unibody
OBD Protocol
ISO 15765-4 CAN (500 kbps)
CAN Architecture
HS-CAN (500 kbps); Nissan EV CAN; OBD2 DLC Pin 6/14
Infotainment
7" NissanConnect EV touchscreen
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed
Reviewed coverage: 2017 - 40 kW (EM61), 80kW (EM61).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2017 Nissan Leaf?

ADAS calibration pricing for a 2017 Nissan Leaf depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Forward camera / lane camera - if equipped, Forward radar / distance sensor - if equipped, and Blind-spot, sonar, around-view, and parking-camera systems - if equipped. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2017 Nissan Leaf?

Yes. The 2017 Nissan Leaf uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 988205SA9D. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2017 Nissan Leaf?

After windshield replacement on a 2017 Nissan Leaf, Forward camera / lane camera - if equipped, Forward radar / distance sensor - if equipped, and Blind-spot, sonar, around-view, and parking-camera systems - if equipped rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.

How long does a 2017 Nissan Leaf module service take?

Most 2017 Nissan Leaf onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 17 programmable modules documented in our database (1 ECU, 3 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.

Do you cover the 2017 Nissan Leaf on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2017 Nissan Leaf. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2017 Nissan Leaf programming?

Every programming, cloning, and calibration job on the 2017 Nissan Leaf is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Which modules on a 2017 Nissan Leaf can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2017 Nissan Leaf. For this vehicle our database documents:

  • 1 engine control (ECU/PCM)
  • 1 transmission control (TCU/TCM)
  • 3 body control (BCM and related)
  • 3 ABS / brake control (EBCM)
  • 1 immobilizer / security
  • 1 key & fob
  • 1 instrument cluster (IPC)
  • 2 steering angle sensor (SAS)
  • 3 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2017 Nissan Leaf covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ADAS Module Part Numbers
28438-3NF2A
ECU / PCM Part Numbers
23710-3NF4A, 23710-3NF5A
BCM / Body Module Part Numbers
~(VERIFY VIA CONSULT FOR LEAF 2017 ZE0, AZE0 (GEN 1)), ~(VERIFY VIA CONSULT FOR LEAF 2017)
SRS / Airbag Module Part Numbers
988205SA9D, 985156WK8A, 985105SA8A, 988205SR9C, 988206WK9C
ABS / EBCM Part Numbers
47660-3NF2A
Instrument Cluster (IPC) Part Numbers
24810-3NF2A

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

(945) 382-4065 Get a Quote

Shared module fitment

Vehicles sharing modules with the 2017 Nissan Leaf

These vehicles use one or more of the same replacement modules indexed for this vehicle.

Finish the repair

Need help finishing this repair?

Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.