Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
The Nissan Leaf Gen 2 on the dedicated EV platform features ProPilot Assist with adaptive cruise and lane centering from 2019, requiring CONSULT III Plus for windshield camera calibration and module programming in a front-wheel-drive electric hatchback where HV safety protocols are mandatory before battery or motor access. The EV-specific Vehicle Control Module differs from ICE Nissan ECM programming procedures and requires CONSULT III Plus with EV-specific datasets. Forward camera recalibration is required after any windshield R&I, making glass replacement a trigger for mandatory ADAS verification on ProPilot-equipped 2019+ units.
3,200+
Vehicles supported
1-Year
Unlimited warranty
Same-Day
Mobile in DFW
OEM-Grade
Native diagnostics
MODEL SERVICE SNAPSHOT
What Core Auto Logic can do for the Nissan Leaf
Model coverage
This Nissan Leaf model page covers 16 indexed years from 2011-2026 with exact-year service pages for module, security, and calibration data.
Across indexed Nissan Leaf years, documented sensor systems include Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear View Camera (RVC); 64 calibration trigger records are indexed across the model line.
Core Auto Logic supports model-line diagnostics, exact-year module programming, security-access planning, and ADAS calibration where equipped for the Nissan Leaf.
LEAF ZE0/AZE0 generation; verify exact build by VIN
2011 - 2017
HS-CAN (500 kbps); Nissan EV CAN; OBD2 DLC Pin 6/14
ADAS SYSTEMS (3)
Forward camera / lane camera - if equippedForward radar / distance sensor - if equippedBlind-spot, sonar, around-view, and parking-camera systems - if equipped
LEAF EV platform (Gen 1: 2011-2017). CONSULT-III Plus required for all PMI and ADAS calibration. | 24 kWh/30 kWh battery. CONSULT-III+ required for HV system diagnostics and state-of-health check.
[EP...
2
Nissan EV platform (Gen 1: 2011-2017; Gen 2: 2018+)
2018 - 2026
HS-CAN (500 kbps); Nissan EV CAN; OBD2 DLC Pin 6/14
ADAS SYSTEMS (5)
Safety Shield 360 Forward Camera (Mobileye EyeQ4)Forward Radar (77GHz) - ACC / AEBBlind Spot Monitor Sensor - Left (BSM)Blind Spot Monitor Sensor - Right (BSM)Rear View Camera (RVC)
LEAF EV platform (Gen 1: 2011-2017). CONSULT-III Plus required for all PMI and ADAS calibration. | 24 kWh/30 kWh battery. CONSULT-III+ required for HV system diagnostics and state-of-health check.
[EP...
FREQUENTLY ASKED QUESTIONS
FAQ
Which ADAS systems does the Nissan Leaf have, and which require calibration after collision repair?
Nissan Leaf coverage includes documented camera/radar ADAS. Forward cameras, radar, blind-spot, and steering-angle sensors usually need calibration after collision or suspension work.
Can you reset the airbag/SRS light on a Nissan Leaf?
Yes. We scan the Nissan Leaf SRS system, confirm crash data or stored faults, reset serviceable modules, and verify the warning light stays off after repairs.
What's involved in programming a replacement ECU/PCM for the Nissan Leaf?
Replacement ECU/PCM work on the Nissan EV Platform Gen 2 (2018+) platform requires module coding, immobilizer pairing, VIN/configuration setup, and post-programming checks with OE-grade tools.
Do you support all-keys-lost (AKL) on the Nissan Leaf?
Yes. AKL support is handled through an authorized locksmith workflow with proof of ownership, immobilizer access, key registration, and start authorization checks.
What's needed after windshield replacement on a Nissan Leaf?
After windshield replacement, the Nissan Leaf forward camera and any documented camera/radar ADAS lane or braking features should be aimed and calibrated before final road verification.
Can you service a Nissan Leaf on-site, mail-in, or both?
We support the Nissan Leaf both ways: on-site diagnostics, calibration, and key work when the vehicle is present, plus mail-in module reset or programming when suitable.
Generations
Leaf generation guides
Start at the generation guide that matches your build, then drill into the exact model-year page for module, security, and calibration specifics.
Across indexed Nissan Leaf years, documented sensor systems include Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear View Camera (RVC); 64 calibration trigger records are indexed across the model line.
Core Auto Logic supports model-line diagnostics, exact-year module programming, security-access planning, and ADAS calibration where equipped for the Nissan Leaf.
Start with the model-year page before quoting module, security, or calibration work. Each year page carries the indexed systems and notes for that build.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.