We provide the software and equipment for the agreed work. The exact tool and procedure depend on your year, VIN and module.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2nd Gen D40 - 2005-2021 generation coverage
2005-2021 Nissan Frontier service guide ADAS Calibration & Module Programming
Choose a repair service below or find your module by part number. Onsite help is available in Dallas-Fort Worth, with mail-in module service nationwide.
What do you need fixed?
Choose a service to start your quote.
Find your module
96 documented Nissan Frontier module records across the 2005-2021 generation. Search by module name or part number, then open a result for requirements and repair options.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ECU / Engine
Engine Control Module (ECM) - 2.5L QR25DE I4 5 records
J2534
Documented for 2005 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-EA005
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MEC35-810 C1
- Notes
- Hardware number MEC35-810 C1.
J2534
Documented for 2006 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2006
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-EA010
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MEC35-820 B1
- Notes
- Additional 2006 I4 variants: EA005, ZP01A, ZP03A.
J2534
Documented for 2007 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2007
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZP03A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- ZP01A is alternate XE variant.
J2534
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZL40A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- ZL06C is alternate 2008 SE/SV I4 variant.
J2534
Documented for 2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZL40A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
Engine Control Module (ECM) - 2.5L QR25DE I4 (auto/alt variant) Verify by VIN 2005 1 record
Documented for 2005 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-EA010
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MEC35-820 B1
- Notes
- Hardware number MEC35-820 B1.
Engine Control Module (ECM) - 2.5L QR25DE I4 (variant) Verify by VIN 2005 1 record
Documented for 2005 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-EA000
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MEC35-800 C1
- Notes
- 2005 Frontier 2.5L QR25DE I4; hardware number MEC35-800 C1.
Engine Control Module (ECM) - 4.0L VQ40DE V6 5 records
J2534
Documented for 2005 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZP14A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Additional 2005 VQ40DE variants: ZP15A, ZP17A, ZP37A, EA20A, EA21A, EA21B, EA22A, EA220, EA26A, EA27A, EA29A, EA63A, EA64A, EA66A, EA68A.
J2534
Documented for 2006 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2006
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZP52A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Additional 2006 V6 variants: ZP14A, ZP15A, ZP17A, ZP37A, ZP51A, ZP53A, ZP53B, ZP54A, ZP54B, ZP56A, EA20A, EA21B, EA220, EA22A, EA27A.
J2534
Documented for 2007 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2007
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZP52A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Additional 2007 variants: ZP14A, ZP15A, ZP17A, ZP37A, ZP51A, ZP53A, ZP53B, ZP54A, ZP54B, ZP56A, ZS02A, ZS04A, ZS04B, ZS05A, ZS06A, ZS08B, ZS09A.
J2534
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZL00A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MEC71-190 D1
- Notes
- Hardware MEC71-190 D1. Additional 2008 V6 variants: ZL04A, ZL05A, ZL05B, ZL05C, ZL06A, ZL07D, ZP51A, ZP52A, ZP53A, ZP53B, ZP54B, ZP56A, ZS02A, ZS04A, ZL32A.
J2534
Documented for 2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZL00A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MEC71-190 D1
- Notes
- Additional 2009 V6 variants: ZL04A, ZL05B, ZL06A, ZL06C, ZL07D, ZP51A, ZP52A, ZP53A, ZP53B, ZP54B, ZP56A, ZS02A, ZS04A, ZZ70A, ZZ79A, ZZ82A, ZZ84A, ZZ89A.
Engine Control Module (ECM) - 4.0L VQ40DE V6 (alt variant) 3 records
J2534
Documented for 2005 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZP37A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
J2534
Documented for 2006 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2006
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZP51A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
J2534
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZL04A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MEC71-270 D1
Engine Control Module (ECM) - 4.0L VQ40DE V6 (ZS series) Verify by VIN 2007 1 record
Documented for 2007 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2007
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZS04A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- 2007-2008 Frontier Off-Road/SE 4.0L VQ40DE V6; ZS-series introduced for 2007 model year alongside ZP-series.
Engine Control Module (ECM) - 2.5L QR25DE I4 (alt variant) Verify by VIN 2008 1 record
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZL06C
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
Engine Control Module (ECM) - 4.0L VQ40DE V6 (ZZ series 2009+) Verify by VIN 2009 1 record
Documented for 2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 23710-ZZ70A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
ECM - 2.5L QR25DE I4 / 4.0L VQ40DE V6 Verify by VIN 2010-2014 1 record
Documented for 2010-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010, 2011, 2012, 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Nissan Frontier ECM. CONSULT-III+ IMMO registration.
ECM / PCM - Nissan powertrain, VIN-specific Verify by VIN 2015-2020 1 record
Documented for 2015-2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017, 2018, 2019, 2020
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- CONSULT/ASIST programming per service information
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- Verify engine, transmission, emissions calibration, and module suffix by VIN. Perform VIN registration, idle/throttle learns, and NATS/NVIS sync as required.
ECM - 3.8L VQ38 V6 Verify by VIN 2021 1 record
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 237101-9BG0A (VERIFY RWD, 4WD SUFFIX VIA CONSULT
- Notes
- CONSULT ECM programming (Programming Port) + VIN + NATS5+ IMMO sync. Throttle + idle relearn. NATS lamp out before test drive.
TCM - 9-Speed Automatic (RE7R01B) Verify by VIN 2021 1 record
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (D41 TCM - VERIFY VIA CONSULT
- Notes
- CONSULT TCM adaptive reset. Nissan Matic-W fluid only. Fluid level via CONSULT temperature monitor. 100+ miles for full adaptation.
Transfer Case Control Module (4WD - PRO-4X/4WD) Verify by VIN 2021 1 record
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (D41 4WD MODULE - VERIFY VIA CONSULT
- Notes
- CONSULT initialization after replacement. Verify 4H/4Lo and PRO-4X e-locker engagement.
Electric Power Steering Control Unit (EPS) Verify by VIN 2021 1 record
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (D41 EPS - VERIFY VIA CONSULT
- Notes
- CONSULT EPS init + torque sensor cal, steering centered. No ProPilot on D41.
TCM / Transmission
TCU - RE5R05A 5-Speed Auto 9 records
J2534
Documented for 2005-2006 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2006
Donor must match part family 31036-EA20X; VIN-locked
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036-EA20X
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Hitachi SH7055F
- Notes
- VIN programming required, TCU relearn via CONSULT-III, use Nissan Matic S ATF, immobilizer sync needed
J2534
Documented for 2007-2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2007, 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7055
- Notes
- Requires CONSULT-III tool for programming. ATF spec: Nissan Matic S. TCU relearn via idle relearn procedure required after installation.
J2534
Documented for 2009-2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009, 2010
Donor must match part family 31036-EA2 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036-EA2
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires CONSULT-III for programming and adaptation. ATF spec: Nissan Matic S. Transmission relearn procedure mandatory after installation.
J2534
Documented for 2011-2012 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2011, 2012
Donor must match part family 31036-EA20X - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036-EA20X
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires VIN coding and adaptation via CONSULT-III. ATF: Nissan Matic S. Idle relearn required after TCU replacement.
J2534
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Donor must match part family 31036 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires ATF relearn procedure after programming. Use Nissan ATF Matic S fluid. CONSULT III+ required for adaptation.
J2534
Documented for 2015-2016 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016
Donor must match part family 31036 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires TCU adaptation and shift point learning. Use Nissan ATF Matic S fluid. CONSULT III+ or equivalent required for programming.
J2534
Documented for 2017-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2017, 2018
Donor must match part family 31036 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires initialization procedure via CONSULT-III. ATF spec: Nissan Matic S. TCU relearn required after installation.
J2534
Documented for 2019-2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019, 2020
Donor must match part family 31036 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- VIN coding required, shift relearn via Consult III+, Nissan Matic S ATF spec
J2534
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Donor must match part family 31036-EA20X - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036-EA20X
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires CONSULT III+ or equivalent J2534 tool. TCU adaptation after installation. Use Nissan Matic S ATF only. CVT relearn procedure required.
TCU - RE4F03B 4-Speed Auto Verify by VIN 2005-2006 1 record
Documented for 2005-2006 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2006
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036-VK50X
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Hitachi SH7034
- Notes
- VIN coding mandatory, adaptive learning reset required, CONSULT-III tool needed, Nissan Matic D ATF specification
TCU - RE5R05A 5-Speed Auto (4WD) 3 records
J2534
Documented for 2007-2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2007, 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7055
- Notes
- 4WD variant requires transfer case coding. CONSULT-III programming mandatory. ATF spec: Nissan Matic S. Complete relearn cycle required.
J2534
Documented for 2009-2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009, 2010
Donor must match part family 31036-EA3 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036-EA3
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- 4WD variant with transfer case control integration. Requires CONSULT-III programming. ATF: Nissan Matic S. Transfer case fluid: Nissan Transfer Case Fluid.
J2534
Documented for 2011-2012 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2011, 2012
Donor must match part family 31036-EA21X - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036-EA21X
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- 4WD variant requires transfer case coding. VIN coding via CONSULT-III mandatory. ATF: Nissan Matic S. Complete relearn cycle needed.
TCU - RE7R01A 7-Speed Auto CVT Verify by VIN 2013-2014 1 record
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7059
- Notes
- CVT variant requires original unit repair only. CVT fluid NS-3 specification. Belt relearn mandatory after TCU programming.
TCU - RE7R01A CVT 2 records
J2534
Documented for 2015-2016 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7267
- Notes
- CVT adaptation required after installation. Use NS-3 CVT fluid only. Marriage procedure to ECM required. CONSULT III+ mandatory.
J2534
Documented for 2017-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7059
- Notes
- CVT fluid spec: NS-3. Requires CVT initialization and adaptive value reset via CONSULT-III. VIN programming mandatory.
TCU - RE7R01A 7-Speed Auto Verify by VIN 2019-2020 1 record
Documented for 2019-2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019, 2020
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas RH850
- Notes
- Security gateway authentication, adaptive learning reset via Consult III+, CVT-NS3 fluid
TCU - 9G-TRONIC 9-Speed Auto Verify by VIN 2021 1 record
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036-EA21X
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental TCU Gen 3
- Notes
- Mercedes-Benz sourced 9G-TRONIC transmission. Requires dealer programming with CONSULT III+. VIN coding mandatory. Reset adaptation values after TCU replacement.
BCM / Body electronics
BCM (Body Control Module) Verify by VIN 2005-2014
Documented for 2005-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Nissan BCM. CONSULT-III+ work support for key registration + module ID.
Body Control Module (BCM) Verify by VIN 2021 284B1-9BF0A (VERIFY VIA CONSULT
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 284B1-9BF0A (VERIFY VIA CONSULT
- Notes
- CONSULT BCM coding + VIN registration after replacement. Verify all body functions via CONSULT.
Intelligent Key ECU Verify by VIN 2021 285E3-9BF0A (VERIFY VIA CONSULT
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 285E3-9BF0A (VERIFY VIA CONSULT
- Notes
- CONSULT + DealerCONNECT auth. All keys erased. Max 4 I-Keys. Key registration + NATS/BCM sync. Verify push-button start and remote functions.
TPMS Control Unit Verify by VIN 2021 (D41 TPMS - VERIFY VIA CONSULT
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (D41 TPMS - VERIFY VIA CONSULT
- Notes
- CONSULT TPMS registration after replacement or new sensors. PRO-4X: re-register after off-road wheel changes. Verify all 4 positions.
SRS / Airbag
Airbag Control Module (ACM) Verify by VIN 2005, 2007 1 record
Documented for 2005, 2007 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2007
Donor must match part family 284B1EA000 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 284B1EA000
- Protocol / method
- Bench
- Cloning supported
- Yes
- Notes
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module Verify by VIN 2005, 2007 1 record
Documented for 2005, 2007 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2007
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 284B1EA010
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged.
Passenger Airbag Module Verify by VIN 2005, 2007 1 record
Documented for 2005, 2007 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2007
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 284B1EB000
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access.
ACM / SRS Module 2005, 2007 3 records
Under center console, floor tunnel
Documented for 2005, 2007 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2007
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 284B1EA000
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 284B1EA000. Also fits: 284B1EA010. Memory chip: 93C76. Crash data clear supported.
Under center console, floor tunnel
Documented for 2005, 2007 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2007
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 284B1EA010
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 284B1EA010. Memory chip: 93C76. Crash data clear supported.
Under center console, floor tunnel
Documented for 2005, 2007 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2007
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 284B1EB000
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 284B1EB000 (verify fitment via VIN). Memory chip: 93C76. Crash data clear supported.
SRS Control Unit 19 records
Under center console
Documented for 2006 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2006
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 98510-ZP62D
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 98510-ZP52C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 98510-ZS19A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 98510-ZP62C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2011 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2011
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 985P0-ZP11C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2011 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2011
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 985P1-ZP11C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2012 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2012
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 98555-ZS11C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2013, 2017 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2017
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 985P1-9BE9A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 98510-9CF8C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2015 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 87650-9BL3A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2016 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2016
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 87600-9BL3A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2017 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2017
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 985P0-9BE9A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 87650-9AL1A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2018-2019, 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2018, 2019, 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 985P0-9BN8B
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2018-2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2018, 2019, 2020
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 985P1-9BN8B
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 25560-9BH0C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2019, 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019, 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 87600-9AL2C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 87650-9AL4C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
Under center console
Documented for 2020-2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020, 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 87600-9AL1A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ABS / Brakes
ABS Actuator and Electric Unit (Control Unit) Verify by VIN 2005-2014
Documented for 2005-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each) Verify by VIN 2005-2014
Documented for 2005-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each) Verify by VIN 2005-2014
Documented for 2005-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Active sensor.
ABS/VDC/ESC Module - VIN-specific Verify by VIN 2015-2020
Documented for 2015-2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017, 2018, 2019, 2020
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Cloning supported
- Yes
- Notes
- Run CONSULT initialization, steering-angle/yaw zero-point, brake bleed, and road-test steps required by the exact build.
ABS/ESC Control Unit Verify by VIN 2021 47660-9BF0A (VERIFY VIA CONSULT
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 47660-9BF0A (VERIFY VIA CONSULT
- Notes
- CONSULT ABS initialization + brake bleed after replacement. SAS zero-point: CONSULT reset + straight drive 25+ mph. BOF: full brake circuit bleed procedure. Verify RAB function after ESC replacement.
Wheel Speed Sensors (all four) Verify by VIN 2021 (D41 WSS - VERIFY EACH CORNER PN VIA CONSULT
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (D41 WSS - VERIFY EACH CORNER PN VIA CONSULT
- Notes
- Active magnetic sensors. CONSULT DTC clear + road test 15+ mph. PRO-4X: harness routing clear of suspension travel.
Other modules
Instrument Panel Cluster (IPC) 8 records
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Donor must match part family 24810-ZL00A - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 24810-ZL00A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2011 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2011
Donor must match part family 24810-ZL10A - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 24810-ZL10A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2012, 2015 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2012, 2015
Donor must match part family 24810-9BF0A - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 24810-9BF0A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2013, 2016 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2016
Donor must match part family 24810-9BF1A - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 24810-9BF1A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2014, 2017 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2014, 2017
Donor must match part family 24810-9BF2A - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 24810-9BF2A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2018
Donor must match part family 24810-9BF3A - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 24810-9BF3A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Donor must match part family 24810-9BF4A - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 24810-9BF4A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2020-2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020, 2021
Donor must match part family 24810-9BT0A - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 24810-9BT0A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) 3 records
Documented for 2005-2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Documented for 2005-2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- cross-year extension)
Documented for 2020-2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020, 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (spiral cable 25554 family)
Connectivity / Accessories
RKE, Intelligent Key, sonar, camera, and convenience options - if equipped Verify by VIN 2005-2020
Documented for 2005-2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Convenience equipment is package-dependent. Use Nissan service information for module replacement, option configuration, DTC checks, and subscription-dependent feature verification.
Safety Shield 360 Camera Calibration (Static) Verify by VIN 2021
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- CONSULT static calibration after windshield R&R or camera replacement. Level surface - BOF truck flat on level plane. No ProPilot dynamic required. Verify all Safety Shield 360 DTC clear.
4WD System Check (PRO-4X / 4WD) Verify by VIN 2021
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- CONSULT 4WD initialization after transfer case, front axle, or diff replacement. Verify 4H/4Lo. PRO-4X e-locker: verify engagement and disengagement via CONSULT and road test.
NissanConnect Remote Services Verify by VIN 2021 (TELEMATICS D41 2024 - VERIFY VIA CONSULT)
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (TELEMATICS D41 2024 - VERIFY VIA CONSULT)
- Notes
- NissanConnect via MyNissan app. Dealer activation via ASIST. Verify after head unit or telematics module replacement.
Tow Package / Trailer Functions (if equipped) Verify by VIN 2021 (D41 TOW MODULE - VERIFY VIA CONSULT
Documented for 2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (D41 TOW MODULE - VERIFY VIA CONSULT
- Notes
- D41 tow capacity up to 6,720 lbs. Factory trailer brake controller: CONSULT initialization after module replacement. Verify trailer connection detection and brake output.
Reference information for 2005-2021. Coverage can vary by year and equipment. Confirm the VIN and full part number before ordering a replacement.
Vehicle overview
- Vehicle
- Nissan Frontier
- Model years
- 2005-2021
- Generation
- 2nd Gen D40
- Platform
- D40
Tools we use for this vehicle
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Tool requirements
Basic OBD2 scanner
View capabilities and limitations
Supported work
- Read codes on SRS systems (25 documented rows)
- Read codes on ECU systems (24 documented rows)
- Read codes on BCM systems (5 documented rows)
- Read codes on TCU / TCM systems (18 documented rows)
- Read codes on ABS systems (6 documented rows)
- Read codes on IPC / SAS systems (11 documented rows)
- Read codes on Gateway systems (1 documented row)
- Read codes on Keys systems (5 documented rows)
- Read codes on Immobilizer systems (5 documented rows)
- Read codes on Accessory systems (6 documented rows)
Limitations
- Gateway programming, coding, cloning, or security work (1 documented row)
Factory programming software (J2534)
View capabilities and limitations
Supported work
- Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Dealer or specialist
View capabilities and limitations
Supported work
- Gateway dealer security rows (1 documented row)
Dealer security and specialist module work should be scoped by VIN before you buy parts or pay for programming.
Get a QuoteKnow this platform
This platform uses Nissan CAN architecture (D41 BOF); OBD2 DLC ISO 15765-4 CAN 500kbps with ISO 15765-4 CAN (500 kbps).
- CAN
- Nissan CAN architecture (D41 BOF); OBD2 DLC ISO 15765-4 CAN 500kbps
- OBD
- ISO 15765-4 CAN (500 kbps)
CAN architecture varies by year OBD protocol varies by year
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. Frontier not ported.
Generation service summary for Nissan Frontier 2nd Gen D40 (2005-2021)
Generation coverage
This page consolidates Nissan Frontier service data for 2005-2021 across 17 model years; service information is available for 17 years.
Choose a yearADAS coverage
Merged ADAS coverage includes 23 system records, including No Factory ADAS Systems (2005), No Factory ADAS Systems (2006), No Factory ADAS Systems (2007), and Rear View Camera (2008-2009). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 21 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 96 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, and security-access planning for the Nissan Frontier 2005-2021 span, with exact-year validation before service. Mail-in module service is available nationwide.
Get a quoteDo I need calibration?
ECM Replacement 2
2005-2014
Yes
CONSULT immobilizer work support + throttle position relearn.
2021
CONSULT programming + VIN + NATS5+ sync. Throttle + idle relearn. Verify RWD/4WD suffix (237101-9BG0A base). NATS lamp out before test drive.
ABS/VDC Module Replacement 1
2005-2014
Yes
CONSULT ABS bleed + VDC sensor reset.
Windshield or forward-camera replacement 2
Forward camera/lane camera
2015-2020Verify camera presence and run the Nissan alignment routine for the exact VIN after glass, camera, bracket, or related trim work.
AEB/LDW/ICC systems if equipped
2015-2020Verify camera presence and run the Nissan alignment routine for the exact VIN after glass, camera, bracket, or related trim work.
Front bumper, grille, or radar service 4
Forward radar
2015-2020Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.
ICC/AEB
2015-2020Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.
sonar
2015-2020Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.
parking sensors if equipped
2015-2020Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.
BCM/IPDM, key, or immobilizer module replacement 6
BCM
2015-2020Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
IPDM
2015-2020Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
NATS/NVIS
2015-2020Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
Intelligent Key
2015-2020Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
RKE
2015-2020Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
alarm
2015-2020Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
ABS/VDC, steering-angle, or suspension service 4
ABS/VDC
2015-2020Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.
steering angle
2015-2020Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.
yaw/lateral sensors
2015-2020Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.
ADAS aim if equipped
2015-2020Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.
Windshield Replacement 1
2021
CONSULT static Safety Shield 360 calibration REQUIRED. BOF truck level surface - all 4 tires on same flat plane. No ProPilot dynamic cal on D41. Verify all Safety Shield 360 DTC clear after calibration.
Forward Camera Replacement 1
2021
Same CONSULT static cal as windshield. PN: 284A1-9BF0A. Bracket fully seated before starting calibration sequence.
Front Radar Replacement 1
2021
CONSULT radar alignment. BOF: bumper brackets torqued to spec before cal. Verify FEB DTC clear.
ABS / ESC Replacement 1
2021
CONSULT brake bleed + SAS zero-point, level road. Full BOF brake circuit bleed. Verify RAB operational.
Intelligent Key ECU Replacement 1
2021
DealerCONNECT auth. All customer keys present. CONSULT registration - all prior keys erased. Max 4 keys.
SAS Zero-Point / Post-Alignment 1
2021
CONSULT SAS reset + straight drive 25+ mph on level road. Required for ESC/VDC and Safety Shield 360 lane functions.
4WD Component Replacement 1
2021
CONSULT 4WD initialization. Verify 4H/4Lo function. PRO-4X: confirm e-locker engagement via CONSULT and road test.
EPS Replacement 1
2021
CONSULT EPS initialization + torque sensor calibration, steering centered on level surface. No ProPilot on D41.
Any Front-End Collision 1
2021
Yes
Inspect and recalibrate forward camera after any front-end collision using CONSULT-III+.
Front Bumper Repair or Replacement 1
2021
Yes
Forward radar angular alignment required after front bumper R&R. Use CONSULT-III+.
Forward Radar Replacement 1
2021
Yes
Radar module replacement requires alignment/calibration using CONSULT-III+.
Rear Bumper Repair or Replacement 1
2021
Yes
BSD radar alignment required after rear bumper R&R. Use CONSULT-III+.
BSM Sensor Replacement 1
2021
Yes
Blind spot monitoring sensor replacement requires calibration using CONSULT-III+.
Mirror Replacement 1
2021
Conditional
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use CONSULT-III+ if applicable.
Year-by-year details
| Year | VIN split | Infotainment | Trim notes |
|---|---|---|---|
| 2005 | |||
| 2006 | |||
| 2007 | |||
| 2008 | |||
| 2009 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2010 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2011 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2012 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2013 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2014 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2015 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2016 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2017 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2018 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2019 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2020 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | NissanConnect | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2021 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | NissanConnect | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
23 ADAS systems documented across the 2005-2021 generation. Rows that apply to only part of the generation carries a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Safety Shield 360 standard SV/PRO-4X/SL; optional S: Forward Emergency Braking (pedestrian), Blind Spot Warning, Rear Cross-Traffic Alert, Lane Departure Warning/Lane Departure Prevention, High Beam Assist, Rear Automatic Braking. No ProPilot Assist on D41.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| No Factory ADAS Systems 2005 | None | None | None | No | - | |
| No Factory ADAS Systems 2006 | None | None | None | No | - | |
| No Factory ADAS Systems 2007 | None | None | None | No | - | |
| Rear View Camera 2008-2009 | Rear Camera | Camera | None | Conditional | - | |
| Rear View Camera 2010-2011 | Rear Camera | Camera | None | YES | - | |
| Rear View Camera 2012-2014 | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitoring 2012-2014 | Radar | ADAS | Static | Conditional | - | |
| Forward Collision Warning / AEB 2012-2014 | Camera | ADAS | Static | Conditional | - | |
| Forward Camera (Monocular) 2015-2019 | Forward Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2019) | |
| Forward Radar (77GHz) 2015-2019 | Front Radar | Radar | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2019) | |
| Blind Spot Monitor Sensor - Left (BSM) 2015-2019 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2019) | |
| Blind Spot Monitor Sensor - Right (BSM) 2015-2019 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2019) | |
| Rear View Camera 2015-2019 | Rear Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2019) | |
| Forward Camera (Monocular) 2020 | Forward Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2020) | |
| Forward Radar (77GHz) 2020 | Front Radar | Radar | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2020) | |
| Blind Spot Monitor Sensor - Left (BSM) 2020 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2020) | |
| Blind Spot Monitor Sensor - Right (BSM) 2020 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2020) | |
| Rear View Camera 2020 | Rear Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2020) | |
| Forward Camera (Monocular) 2021 | Forward Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2021) | |
| Forward Radar (77GHz) 2021 | Front Radar | Radar | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2021) | |
| Blind Spot Monitor Sensor - Left (BSM) 2021 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2021) | |
| Blind Spot Monitor Sensor - Right (BSM) 2021 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2021) | |
| Rear View Camera 2021 | Rear Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(FRONTIER 2021) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement 2005-2014
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement 2005-2014
CONSULT ABS bleed + VDC sensor reset.
Windshield or forward-camera replacement 2015-2020 Affected: Forward camera/lane camera, AEB/LDW/ICC systems if equipped
Verify camera presence and run the Nissan alignment routine for the exact VIN after glass, camera, bracket, or related trim work.
Front bumper, grille, or radar service 2015-2020 Affected: Forward radar, ICC/AEB, sonar, parking sensors if equipped
Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.
BCM/IPDM, key, or immobilizer module replacement 2015-2020 Affected: BCM, IPDM, NATS/NVIS, Intelligent Key, RKE, alarm
Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
ABS/VDC, steering-angle, or suspension service 2015-2020 Affected: ABS/VDC, steering angle, yaw/lateral sensors, ADAS aim if equipped
Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.
Windshield Replacement 2021
CONSULT static Safety Shield 360 calibration REQUIRED. BOF truck level surface - all 4 tires on same flat plane. No ProPilot dynamic cal on D41. Verify all Safety Shield 360 DTC clear after calibration.
Forward Camera Replacement 2021
Same CONSULT static cal as windshield. PN: 284A1-9BF0A. Bracket fully seated before starting calibration sequence.
Front Radar Replacement 2021
CONSULT radar alignment. BOF: bumper brackets torqued to spec before cal. Verify FEB DTC clear.
ECM Replacement 2021
CONSULT programming + VIN + NATS5+ sync. Throttle + idle relearn. Verify RWD/4WD suffix (237101-9BG0A base). NATS lamp out before test drive.
ABS / ESC Replacement 2021
CONSULT brake bleed + SAS zero-point, level road. Full BOF brake circuit bleed. Verify RAB operational.
Intelligent Key ECU Replacement 2021
DealerCONNECT auth. All customer keys present. CONSULT registration - all prior keys erased. Max 4 keys.
SAS Zero-Point / Post-Alignment 2021
CONSULT SAS reset + straight drive 25+ mph on level road. Required for ESC/VDC and Safety Shield 360 lane functions.
4WD Component Replacement 2021
CONSULT 4WD initialization. Verify 4H/4Lo function. PRO-4X: confirm e-locker engagement via CONSULT and road test.
EPS Replacement 2021
CONSULT EPS initialization + torque sensor calibration, steering centered on level surface. No ProPilot on D41.
Any Front-End Collision 2021
Inspect and recalibrate forward camera after any front-end collision using CONSULT-III+.
Front Bumper Repair or Replacement 2021
Forward radar angular alignment required after front bumper R&R. Use CONSULT-III+.
Forward Radar Replacement 2021
Radar module replacement requires alignment/calibration using CONSULT-III+.
Rear Bumper Repair or Replacement 2021
BSD radar alignment required after rear bumper R&R. Use CONSULT-III+.
BSM Sensor Replacement 2021
Blind spot monitoring sensor replacement requires calibration using CONSULT-III+.
Mirror Replacement 2021
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use CONSULT-III+ if applicable.
ECU and TCU access paths by engine
Available access data covers 1 ECU or TCU family across 1 engine row. Final service is still confirmed by VIN, module label, and installed software.
Shown access methods: OBD, BENCH.
D3
Denso - ECU / PCM
View 1 engine record
D3
Denso - ECU / PCM
-
2013-20212.5L 16V NA (QR25) - 186 PS - Petrol
11 gateway, immobilizer, and security items documented across the 2005-2021 generation.
Gateway / Security Modules
Central Gateway Module Dealer security required
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- D41 Body-on-Frame (BOF) - High-Strength Steel ladder frame; steel bed
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Nissan CAN architecture (D41 BOF); OBD2 DLC ISO 15765-4 CAN 500kbps
- Infotainment
- 8" NissanConnect touchscreen (SV+); 9" available SL/PRO-4X; Apple CarPlay / Android Auto standard SV+; SiriusXM
- OTA Capable
- No
- Infotainment Name
- NissanConnect
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Available
Reviewed coverage: 2009-2021 - 2.3 BlueDCI EU6, 2.5L (YO25ETi), 2.5L 16V NA (QR25), 3.8 V6.
Confirm the exact engine, ECU, and any prerequisite access method before service.
Confirmation is limited to reviewed year/engine rows; other variants require confirmation.
WHAT WE RESOLVE
2nd Gen D40 (2005-2021) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include No Factory ADAS Systems (2005), No Factory ADAS Systems (2006), No Factory ADAS Systems (2007), and Rear View Camera (2008-2009). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve Airbag Control Module (ACM) (2005, 2007), Driver Airbag Module (2005, 2007), and Passenger Airbag Module (2005, 2007). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Nissan Frontier (2005-2021) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Nissan Frontier (2005-2021). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Nissan Frontier (2005-2021)?
The Nissan Frontier (2005-2021) generation currently shows 78 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include Airbag Control Module (ACM) (2005, 2007), Driver Airbag Module (2005, 2007), and Passenger Airbag Module (2005, 2007). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 284B1EA000 (2005, 2007) - confirm for your exact year/VIN.
Does Nissan Frontier (2005-2021) need ADAS calibration after glass or collision work?
The merged generation data documents 23 ADAS systems, including No Factory ADAS Systems (2005), No Factory ADAS Systems (2006), No Factory ADAS Systems (2007), Rear View Camera (2008-2009), and Rear View Camera (2010-2011). Calibration triggers include ECM Replacement (2005-2014), ABS/VDC Module Replacement (2005-2014), Windshield or forward-camera replacement (2015-2020), and Front bumper, grille, or radar service (2015-2020). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Nissan Frontier (2005-2021)?
Yes. The generation data includes 25 SRS records, including Airbag Control Module (ACM) (2005, 2007), Driver Airbag Module (2005, 2007), and Passenger Airbag Module (2005, 2007). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 284B1EA000 (2005, 2007) - confirm for your exact year/VIN.
Do all Nissan Frontier (2005-2021) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2005-2021; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
How long does service take for Nissan Frontier (2005-2021)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Is Nissan Frontier (2005-2021) service mobile or mail-in?
Mobile service covers DFW on-vehicle diagnostics, post-repair coding, and supported module work. Mail-in module service is available nationwide. We confirm the active path for your exact year, VIN, module, and requested scope before service.
More Frontier generations
2nd Gen D40 2005-2021 You are here 3rd Gen D41 2022-2026
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.