VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2013 Nissan Frontier Supported Services
2013 Nissan Frontier
ADAS, Module Repair & Programming
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
- Platform D40 (2nd Gen, 2005-2021)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Nissan NATS6 (ID46 Philips Crypto 2 transponder); intelligent key with push-button start; PIN extraction via CONSULT-III+ possible pre-2015; AKL requires CONSULT-III+ + PIN code + BCM registration
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2013 Nissan Frontier. On this vehicle we cover documented systems include Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning / AEB, this D40 (2nd Gen, 2005-2021) platform vehicle, NATS / I-Key immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
D40 (2nd Gen, 2005-2021)
Production
2005-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES
Exact-year service summary for 2013 Nissan Frontier
Electronic systems coverage
This 2013 Nissan Frontier page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systemsProgrammable modules
This page indexes 13 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 4 gateway, immobilizer, or key-security records for this 2013 Nissan Frontier.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2013 Nissan Frontier using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Immobilizer: NATS / I-Key - Standard; Platform: D40 (2nd Gen, 2005-2021) - Confirmed
Driver-assist suite
No standard ADAS suite - pre-Safety Shield 360 generation. Optional Automatic Emergency Braking, Blind Spot Warning on upper trims.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
Infotainment context
NissanConnect (5" or 7" touchscreen); Bluetooth; USB/Aux; navigation available on SL+
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Choose a section to view data
Feature availability 2
Immobilizer: NATS / I-Key
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: D40 (2nd Gen, 2005-2021)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Nissan Frontier issues we resolve on this platform: Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning / AEB recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - D40 (2nd Gen, 2005-2021) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - NATS / I-Key immobilizer; all-keys-lost supported.
Documented for the 2nd Gen D40 - includes this 2013 model year. Open the full coverage on the generation guide.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2013 Nissan Frontier?
ADAS calibration pricing for a 2013 Nissan Frontier depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning / AEB. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs and we return a number within 4 hours.
Can you reset the airbag light on a 2013 Nissan Frontier?
Yes. The 2013 Nissan Frontier uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 985P1-9BE9A. Bench-only or in-vehicle - both paths are supported. Send the part number and a description of what triggered the light, and we will provide a quote and ETA.
What is needed after replacing the windshield on a 2013 Nissan Frontier?
After windshield replacement on a 2013 Nissan Frontier, Rear View Camera and Forward Collision Warning / AEB rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site (DFW Metroplex) with OE target fixtures or via mail-in for the front camera/radar module.
How long does a 2013 Nissan Frontier module service take?
Most 2013 Nissan Frontier jobs complete same-day once the vehicle or module arrives. This vehicle has roughly 14 programmable modules documented in our database (1 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Module-bench work (ECU clones, BCM reprograms, SRS resets) ships back inside 1-3 business days including return shipping. ADAS calibration is on-site for DFW or mail-in for the front module.
Do you cover the 2013 Nissan Frontier on-site, or is this mail-in only?
Both. We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding) and a mail-in bench for module-only jobs (ECU cloning, BCM repair, SRS reset, TCU clone). Quote the work and we will tell you which path is right for the 2013 Nissan Frontier.
What kind of warranty do you offer on 2013 Nissan Frontier programming?
Every programming, cloning, and calibration job on the 2013 Nissan Frontier is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2013 Nissan Frontier with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2013 Nissan Frontier. Immobilizer generation on this platform: NATS / I-Key. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2013 Nissan Frontier can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2013 Nissan Frontier. For this vehicle our database documents:
- 1 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 3 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing for your specific vehicle within 4 hours.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2013 Nissan Frontier
These vehicles use one or more of the same replacement modules indexed for this vehicle.