VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2022 Nissan Frontier Supported Services
2022 Nissan Frontier
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform D41 (3rd Gen Frontier, 2022+) - Nissan BOF Ladder Frame; complete redesign from D40
- CAN Architecture Nissan CAN architecture (D41 BOF); OBD2 DLC ISO 15765-4 CAN 500kbps
- Security Nissan NATS5+ AES rolling code; no OBD pin extraction; AKL requires CONSULT-III Plus + DealerCONNECT dealer authorization; max 4 Intelligent Keys
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2022 Nissan Frontier. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this D41 (3rd Gen Frontier, 2022+) - Nissan BOF Ladder Frame; complete redesign from D40 platform vehicle, Nissan NATS5+ (AES rolling code, D41 Frontier 2022) immobilizer support, NissanConnect infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
D41 (3rd Gen Frontier, 2022+) - Nissan BOF Ladder Frame; complete redesign from D40
Production
2005-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
Nissan CAN architecture (D41 BOF); OBD2 DLC ISO 15765-4 CAN 500kbps
YEAR-SPECIFIC NOTES
Infotainment
NissanConnect
Exact-year service summary for 2022 Nissan Frontier
ADAS coverage
This 2022 Nissan Frontier page documents 5 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Forward Camera Replacement, Front Radar Replacement, and ECM Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 23 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 6 gateway, immobilizer, or key-security records for this 2022 Nissan Frontier.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2022 Nissan Frontier using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Safety Shield 360 standard SV/PRO-4X/SL - Standard; Platform: D41 (3rd Gen Frontier, 2022+) - Confirmed
Driver-assist suite
Safety Shield 360 standard SV/PRO-4X/SL; optional S trim: Forward Emergency Braking (pedestrian), Blind Spot Warning, Rear Cross-Traffic Alert, Lane Departure Warning/Lane Departure Prevention, High Beam Assist, Rear Automatic Braking. No ProPilot Assist on D41 Frontier.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
Infotainment context
NissanConnect; 8" NissanConnect touchscreen (SV+); 9" available on SL/PRO-4X; Apple CarPlay / Android Auto standard SV+; SiriusXM; NissanConnect remote services on equipped trims
Network and access
CAN: Nissan CAN architecture (D41 BOF); OBD2 DLC ISO 15765-4 CAN 500kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2022 Nissan Frontier. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
5 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
1 module documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
3 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
5 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
15 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Safety Shield 360 standard SV/PRO-4X/SL
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: D41 (3rd Gen Frontier, 2022+)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Nissan Frontier issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - D41 (3rd Gen Frontier, 2022+) - Nissan BOF Ladder Frame; complete redesign from D40 platform uses Nissan CAN architecture (D41 BOF); OBD2 DLC ISO 15765-4 CAN 500kbps.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Safety Shield 360 standard SV/PRO-4X/SL; optional S trim: Forward Emergency Braking (pedestrian), Blind Spot Warning, Rear Cross-Traffic Alert, Lane Departure Warning/Lane Departure Prevention, High Beam Assist, Rear Automatic Braking. No ProPilot Assist on D41 Frontier.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Camera | ADAS | Static | YES | 284A1-9BF0A (WINDSHIELD-MOUNTED MONOCULAR - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Radar | ADAS | Static + Dynamic | YES | 28438-9BF0A (FRONT BUMPER CENTER - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) | Radar | ADAS | Static + Dynamic | YES | (D41 REAR BSD - VERIFY PN VIA OUR DIAGNOSTIC SOFTWARE | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS | Static + Dynamic | YES | (D41 REAR BSD - VERIFY PN VIA OUR DIAGNOSTIC SOFTWARE | |
| Rear View Camera | Camera | ADAS | Static | YES | (D41 BACKUP CAMERA - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement
CONSULT-III Plus Safety Shield 360 forward camera STATIC calibration REQUIRED after windshield R&R on D41 Frontier (SV/PRO-4X/SL or S-trim if ADAS equipped). Vehicle on level, flat surface - BOF truck on unlevel ground will corrupt calibration. WSM target per CONSULT on-screen guidance. D41 does NOT require dynamic (ProPilot) calibration. Verify all Safety Shield 360 DTC clear: FEB, LDW, LDP, High Beam Assist.
Forward Camera Replacement
Same CONSULT static calibration as windshield procedure. Confirm camera PN: 284A1-9BF0A D41. Bracket fully seated before calibration. CONSULT guides initialization + static sequence.
Front Radar Replacement
CONSULT-III Plus radar alignment after replacement. D41 BOF: confirm all bumper mounting brackets torqued to spec before cal - BOF frame professional bench programming tool can affect bumper alignment. Bumper cover fully reinstalled. Verify FEB DTC clear.
ECM Replacement
CONSULT programming (Programming Port) + VIN registration + NATS5+ IMMO sync. Throttle + idle relearn via CONSULT. Verify RWD vs 4WD ECM suffix (237101-9BG0A base). NATS lamp must extinguish before test drive.
ABS / ESC Unit Replacement
CONSULT ABS initialization + automated brake bleed. SAS zero-point: CONSULT reset + straight drive 25+ mph on level road. Verify Safety Shield 360 RAB function. D41 BOF: confirm front and rear brake circuits bled completely - BOF trucks can have longer brake lines requiring more bleed cycles.
Intelligent Key ECU Replacement
DealerCONNECT auth required. All customer keys physically present. CONSULT key registration - all prior keys erased. Verify all new keys start vehicle and remote functions work. Max 4 keys. NATS5+ + ECM sync via CONSULT.
SAS Zero-Point / Post-Alignment
After any wheel alignment or steering component replacement: CONSULT SAS zero-point reset. Drive straight 25+ mph on level road. Required for correct ESC/VDC operation and Safety Shield 360 lane departure functions.
4WD Component Replacement (PRO-4X)
After transfer case, front axle, or front differential replacement: CONSULT-III Plus 4WD system initialization. Verify 4H and 4Lo function. Confirm no 4WD DTC. PRO-4X e-locker: verify engagement and disengagement via CONSULT and road test.
EPS Replacement
CONSULT EPS initialization + torque sensor calibration on level surface, steering centered. Verify no EPS DTC. D41 Frontier: no ProPilot Assist - EPS is standard assist only. Confirm normal steering feel after calibration.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using CONSULT-III+.
Front Bumper Repair or Replacement
Forward radar angular alignment required after front bumper R&R. Use CONSULT-III+.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using CONSULT-III+.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use CONSULT-III+.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using CONSULT-III+.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use CONSULT-III+ if applicable.
SRS Modules
SRS Control Unit 985P0-9BU9C
- Part number
- 985P0-9BU9C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit 985P1-9BU9C
- Part number
- 985P1-9BU9C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit 98820-9BU2A
- Part number
- 98820-9BU2A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU Modules
ECM - 3.8L VQ38 V6 237101-9BG0A (VERIFY RWD, 4WD SUFFIX VIA CONSULT
- Part number
- 237101-9BG0A (VERIFY RWD, 4WD SUFFIX VIA CONSULT
- Notes
- CONSULT-III Plus ECM programming (Programming Port) + VIN registration + NATS5+ IMMO sync with Intelligent Key ECU after replacement. VQ38 is a naturally aspirated V6 - no boost parameters. Throttle valve closed position learn + idle air volume learn via CONSULT required after replacement. PRO-4X: verify 4WD-specific ECM variant PN.
TCM - 9-Speed Automatic (RE7R01B) (D41 TCM - VERIFY VIA CONSULT
- Part number
- (D41 TCM - VERIFY VIA CONSULT
- Notes
- D41 Frontier uses 9-speed automatic transmission (RE7R01B). CONSULT-III Plus TCM adaptive data reset after TCM replacement. Use Nissan Matic-W transmission fluid (9-speed spec) - do NOT use Matic-S or other Nissan ATF types. Fluid level check via CONSULT temperature monitoring. Full adaptive learning requires 100+ miles varied driving.
Transfer Case Control Module (4WD - PRO-4X/4WD trims) (D41 4WD TRANSFER CASE MODULE - VERIFY VIA CONSULT
- Part number
- (D41 4WD TRANSFER CASE MODULE - VERIFY VIA CONSULT
- Notes
- PRO-4X and 4WD-equipped Frontier: transfer case control module for 4H/4Lo engagement. CONSULT-III Plus module initialization after replacement. Verify 4H and 4Lo engagement function via CONSULT and road test.
Electric Power Steering Control Unit (EPS) (D41 EPS - VERIFY VIA CONSULT
- Part number
- (D41 EPS - VERIFY VIA CONSULT
- Notes
- CONSULT-III Plus EPS initialization + steering torque sensor calibration after EPS replacement. Vehicle on level surface, steering wheel centered. Verify no EPS DTC after calibration. D41 Frontier does not have ProPilot Assist - EPS function is standard steering assist only.
BCM Modules
Body Control Module (BCM) 284B1-9BF0A (VERIFY VIA CONSULT
- Part number
- 284B1-9BF0A (VERIFY VIA CONSULT
- Notes
- CONSULT-III Plus BCM coding + VIN registration after replacement on D41 Frontier. BCM controls exterior/interior lighting, power windows, door locks, TPMS display, horn, 4WD indicator logic. Verify all body function outputs via CONSULT after replacement.
Intelligent Key ECU 285E3-9BF0A (VERIFY VIA CONSULT
- Part number
- 285E3-9BF0A (VERIFY VIA CONSULT
- Notes
- NATS5+ Intelligent Key controller on D41. CONSULT-III Plus + DealerCONNECT authorization for replacement and key re-registration. All prior keys erased. Max 4 Intelligent Keys. CONSULT key programming + BCM/NATS sync. Verify push-button start and remote lock/unlock with all new keys.
TPMS Control Unit (D41 TPMS - VERIFY VIA CONSULT
- Part number
- (D41 TPMS - VERIFY VIA CONSULT
- Notes
- CONSULT TPMS sensor ID registration after unit replacement or new sensors. Position learning via CONSULT. PRO-4X: after off-road wheel/tire changes, TPMS sensor IDs must be re-registered. Verify all 4 positions report correctly and no TPMS DTC.
TCU / TCM Transmission Modules
TCU - RE7R01A CVT 31036
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7269
- Notes
- CVT relearn via CONSULT III+, NS-3 CVT fluid required, VIN and immobilizer coding mandatory
TCU - 7AT 7-Speed Auto 31036
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7269
- Notes
- Adaptive learning reset required, CONSULT III+ for programming, Matic S ATF specification
ABS / Brake Modules
ABS/ESC Control Unit 47660-9BF0A (VERIFY VIA CONSULT
- Part number
- 47660-9BF0A (VERIFY VIA CONSULT
- Notes
- Bosch or Hitachi ABS/ESC unit on D41 (verify manufacturer via CONSULT part ID). CONSULT-III Plus ABS initialization after replacement. SAS zero-point calibration required after any alignment or ABS/ESC replacement: CONSULT SAS reset + drive straight at 25+ mph on level road. Safety Shield 360 RAB shares ESC logic - verify RAB function post-replacement.
Wheel Speed Sensor - Front Left (D41 WSS FL - VERIFY VIA CONSULT
- Part number
- (D41 WSS FL - VERIFY VIA CONSULT
- Notes
- Active magnetic WSS, front left. CONSULT DTC clear + road test 15+ mph. Verify signal plausible vs other sensors.
Wheel Speed Sensor - Front Right (D41 WSS FR - VERIFY VIA CONSULT
- Part number
- (D41 WSS FR - VERIFY VIA CONSULT
- Notes
- Front right WSS. Same procedure as front left.
Wheel Speed Sensor - Rear Left (D41 WSS RL - VERIFY VIA CONSULT
- Part number
- (D41 WSS RL - VERIFY VIA CONSULT
- Notes
- Rear left WSS. CONSULT DTC clear + road test.
Wheel Speed Sensor - Rear Right (D41 WSS RR - VERIFY VIA CONSULT
- Part number
- (D41 WSS RR - VERIFY VIA CONSULT
- Notes
- Same as rear left procedure.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 24810-9BW0A
- Part number
- 24810-9BW0A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (spiral cable 25554 family)
Connectivity & Accessories
Safety Shield 360 Camera Calibration (Static)
- Notes
- CONSULT-III Plus guided static calibration REQUIRED after windshield R&R or camera replacement on D41 Frontier. WSM target positioned per CONSULT on-screen guidance. Clear all objects from forward camera FOV. D41 does NOT have ProPilot Assist - static-only calibration is complete procedure. Verify all Safety Shield 360 DTC clear: FEB, LDW, LDP, High Beam Assist.
NissanConnect Remote Services (TELEMATICS UNIT D41 - VERIFY VIA CONSULT)
- Part number
- (TELEMATICS UNIT D41 - VERIFY VIA CONSULT)
- Notes
- NissanConnect via MyNissan app on equipped D41 trims (SV+). Remote lock/unlock, locate. Dealer activation via Nissan ASIST. Verify connectivity after head unit or telematics module replacement.
4WD System Check (PRO-4X / 4WD Trims)
- Notes
- After any 4WD component replacement (transfer case, front axle, front diff): CONSULT-III Plus 4WD system initialization and function check. Verify 4H and 4Lo engagement/disengagement. PRO-4X: verify electronic-locking rear differential engagement via CONSULT and road test if e-locker equipped.
Tow Package / Trailer Brake Controller (if equipped) (D41 TOW
- Part number
- (D41 TOW
- Notes
- D41 Frontier tow capacity up to 6,720 lbs (properly equipped). If factory trailer brake controller equipped: CONSULT initialization after module replacement. Verify trailer connection detection and brake output function.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- D41 Body-on-Frame (BOF) - High-Strength Steel ladder frame; steel bed
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Nissan CAN architecture (D41 BOF); OBD2 DLC ISO 15765-4 CAN 500kbps
- Infotainment
- 8" NissanConnect touchscreen (SV+); 9" available on SL/PRO-4X; Apple CarPlay / Android Auto standard SV+; SiriusXM; NissanConnect remote services on equipped trims
- OTA Capable
- No
- Infotainment Name
- NissanConnect
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2022 - 2.5L 16V NA (QR25).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. Frontier not ported.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2022 Nissan Frontier?
ADAS calibration pricing for a 2022 Nissan Frontier depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2022 Nissan Frontier?
Yes. The 2022 Nissan Frontier uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 985P0-9BU9C. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2022 Nissan Frontier?
After windshield replacement on a 2022 Nissan Frontier, Forward Camera (Monocular), Forward Radar (77GHz), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2022 Nissan Frontier module service take?
Most 2022 Nissan Frontier onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 24 programmable modules documented in our database (4 ECU, 3 BCM, 2 TCU, 5 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2022 Nissan Frontier on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2022 Nissan Frontier. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2022 Nissan Frontier programming?
Every programming, cloning, and calibration job on the 2022 Nissan Frontier is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2022 Nissan Frontier can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2022 Nissan Frontier. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 5 ABS / brake control (EBCM)
- 3 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 5 ADAS module
Infotainment on this platform: NissanConnect. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2022 Nissan Frontier covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 284A1-9BF0A, 28438-9BF0A
- ECU / PCM Part Numbers
- 237101-9BG0A
- BCM / Body Module Part Numbers
- 284B1-9BF0A (VERIFY VIA CONSULT, 285E3-9BF0A (VERIFY VIA CONSULT, (D41 TPMS - VERIFY VIA CONSULT
- TCU / TCM Part Numbers
- 31036
- SRS / Airbag Module Part Numbers
- 985P0-9BU9C, 985P1-9BU9C, 98820-9BU2A
- ABS / EBCM Part Numbers
- 47660-9BF0A, 47660-9BU0A, D41 3RD GEN FRONTIER (REDESIGN)
- Instrument Cluster (IPC) Part Numbers
- 24810-9BW0A
- Transmission Control Module (TCM) Part Numbers
- 31036
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (SPIRAL CABLE 25554 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2022 Nissan Frontier
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.