Electronic systems coverage
This 2005 Nissan Frontier page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systems 3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
No ADAS systems detected on this vehicle. Want to switch to Onsite Diagnostics? Most non-ADAS issues are diagnosed and resolved in a single visit.
2005 Nissan Frontier Supported Services
2005 Nissan Frontier
ADAS calibration, module programming, and security relearns
Full ADAS calibration, module programming, and key security work for the 2005 Nissan Frontier. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Technical snapshot
- Platform D40 (2nd Gen, 2005-2021)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Nissan NATS5 (ID46 Philips transponder); traditional key or Intelligent Key (FOBIK); PIN extraction via CONSULT-III+ possible; AKL requires CONSULT + PIN code + NATS ECM registration
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2005 Nissan Frontier. On this vehicle we cover documented systems include No Factory ADAS Systems, this D40 (2nd Gen, 2005-2021) platform vehicle, NATS / I-Key immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
D40 (2nd Gen, 2005-2021)
Production
2005-present
Trim Levels
-
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Exact-year service summary for 2005 Nissan Frontier
Programmable modules
This page indexes 21 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and SAS coverage.
View modulesGateway and security
This page includes 4 gateway, immobilizer, or key-security records for this 2005 Nissan Frontier.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2005 Nissan Frontier using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Basic: Rear view camera only (2011-2018) - Available; Platform: D40 (2nd Gen, 2005-2021) - Confirmed
Driver-assist suite
Basic: Rear view camera only (2011-2018)
Infotainment context
Nissan AM/FM stereo; CD player; Bluetooth (select trims); Aux input
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2005 Nissan Frontier. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
5 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
1 module documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
6 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
Feature availability 2
Basic: Rear view camera only (2011-2018)
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: D40 (2nd Gen, 2005-2021)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Nissan Frontier issues we resolve on this platform: No Factory ADAS Systems recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - D40 (2nd Gen, 2005-2021) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Basic: Rear view camera only (2011-2018)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| No Factory ADAS Systems | None | None | None | No | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement
CONSULT ABS bleed + VDC sensor reset.
SRS Modules
Airbag Control Module (ACM) 284B1EA000
- Part number
- 284B1EA000
- Protocol / method
- Bench
- Cloning supported
- Yes
- Notes
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module 284B1EA010
- Part number
- 284B1EA010
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged.
Passenger Airbag Module 284B1EB000
- Part number
- 284B1EB000
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access.
ACM / SRS Module 284B1EA000
- Part number
- 284B1EA000
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 284B1EA000. Also fits: 284B1EA010. Memory chip: 93C76. Crash data clear supported.
ACM / SRS Module 284B1EA010
- Part number
- 284B1EA010
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 284B1EA010. Memory chip: 93C76. Crash data clear supported.
ACM / SRS Module 284B1EB000
- Part number
- 284B1EB000
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 284B1EB000 (verify fitment via VIN). Memory chip: 93C76. Crash data clear supported.
ECU Modules
Engine Control Module (ECM) - 2.5L QR25DE I4 23710-EA005
- Part number
- 23710-EA005
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MEC35-810 C1
- Notes
- Hardware number MEC35-810 C1.
Engine Control Module (ECM) - 2.5L QR25DE I4 (auto/alt variant) 23710-EA010
- Part number
- 23710-EA010
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MEC35-820 B1
- Notes
- Hardware number MEC35-820 B1.
Engine Control Module (ECM) - 2.5L QR25DE I4 (variant) 23710-EA000
- Part number
- 23710-EA000
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MEC35-800 C1
- Notes
- 2005 Frontier 2.5L QR25DE I4; hardware number MEC35-800 C1.
Engine Control Module (ECM) - 4.0L VQ40DE V6 23710-ZP14A
- Part number
- 23710-ZP14A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Additional 2005 VQ40DE variants: ZP15A, ZP17A, ZP37A, EA20A, EA21A, EA21B, EA22A, EA220, EA26A, EA27A, EA29A, EA63A, EA64A, EA66A, EA68A.
Engine Control Module (ECM) - 4.0L VQ40DE V6 (alt variant) 23710-ZP37A
- Part number
- 23710-ZP37A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
BCM Modules
BCM (Body Control Module)
- Notes
- Nissan BCM. CONSULT-III+ work support for key registration + module ID.
TCU / TCM Transmission Modules
TCU - RE5R05A 5-Speed Auto 31036-EA20X
- Part number
- 31036-EA20X
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Hitachi SH7055F
- Notes
- VIN programming required, TCU relearn via CONSULT-III, use Nissan Matic S ATF, immobilizer sync needed
TCU - RE4F03B 4-Speed Auto 31036-VK50X
- Part number
- 31036-VK50X
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Hitachi SH7034
- Notes
- VIN coding mandatory, adaptive learning reset required, CONSULT-III tool needed, Nissan Matic D ATF specification
ABS / Brake Modules
ABS Actuator and Electric Unit (Control Unit)
- Notes
- Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each)
- Notes
- Active sensor. DTC C1101/C1102 series.
Other Modules (IPC, SAS)
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
RKE, Intelligent Key, sonar, camera, and convenience options - if equipped
- Notes
- Convenience equipment is package-dependent. Use Nissan service information for module replacement, option configuration, DTC checks, and subscription-dependent feature verification.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Body-on-frame midsize pickup construction; verify cab, bed, frame, and trim details by VIN
- OBD Protocol
- ISO 9141-2 / KWP2000 (OBD-II, pre-CAN)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Nissan AM/FM stereo; CD player; Bluetooth (select trims); Aux input
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2005 Nissan Frontier?
ADAS calibration pricing for a 2005 Nissan Frontier depends on which of its 1 documented systems need work after a repair. This vehicle is documented with No Factory ADAS Systems. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2005 Nissan Frontier?
Yes. The 2005 Nissan Frontier uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 284B1EA000. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2005 Nissan Frontier?
After windshield replacement on a 2005 Nissan Frontier, the forward-facing ADAS camera typically requires recalibration before lane-keep, pre-collision, and adaptive-cruise systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2005 Nissan Frontier module service take?
Most 2005 Nissan Frontier onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 17 programmable modules documented in our database (5 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2005 Nissan Frontier on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2005 Nissan Frontier. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2005 Nissan Frontier programming?
Every programming, cloning, and calibration job on the 2005 Nissan Frontier is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2005 Nissan Frontier can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2005 Nissan Frontier. For this vehicle our database documents:
- 5 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 2 steering angle sensor (SAS)
- 1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2005 Nissan Frontier covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 23710-EA005, 23710-EA010, 23710-EA000, 23710-ZP14A, 23710-ZP37A
- TCU / TCM Part Numbers
- 31036-EA20X, 31036-VK50X
- SRS / Airbag Module Part Numbers
- 284B1EA000, 284B1EA010, 284B1EB000
- Transmission Control Module (TCM) Part Numbers
- 31036-EA20X, 31036-VK50X
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2005 Nissan Frontier
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.