VIN / Build Split
VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2019 Mercedes-Benz Glc Supported Services
2019 Mercedes-Benz Glc
ADAS calibration, module programming, and security relearns
Trims: GLC 300, GLC 300 4MATIC, AMG GLC 43, AMG GLC 63. All include ADAS and 360 camera.
Technical snapshot
- Platform X253
- CAN Architecture MB CAN-C (powertrain), CAN-B (body/comfort), MOST150 (media), FlexRay (chassis)
- Security MB EIS + ISM + ECM triad - dealer network SCN authorization required
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 Mercedes Benz GLC. On this vehicle we cover documented systems include Front Stereo Camera (Driver Assistance Package Plus), Front Long-Range Radar (Distronic Plus / ABA), and Blind Spot Assist / Rear Cross-Traffic Alert, this X253 platform vehicle, MB EIS Gen 3 (SCN-coded, server-side authorization) immobilizer support, Mercedes-Benz MBUX infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
X253
Production
2016-present
Trim Levels
Trims: GLC 300, GLC 300 4MATIC, AMG GLC 43, AMG GLC 63. All include ADAS and 360 camera.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
MB CAN-C (powertrain), CAN-B (body/comfort), MOST150 (media), FlexRay (chassis)
YEAR-SPECIFIC NOTES
Infotainment
Mercedes-Benz MBUX
Wireless Support
CarPlay: Yes
Exact-year service summary for 2019 Mercedes Benz GLC
ADAS coverage
This 2019 Mercedes Benz GLC page documents 5 ADAS systems, including Front Stereo Camera (Driver Assistance Package Plus), Front Long-Range Radar (Distronic Plus / ABA), Blind Spot Assist / Rear Cross-Traffic Alert, and Parktronic / Active Parking Assist.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair, Rear Bumper Repair, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 27 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 11 gateway, immobilizer, or key-security records for this 2019 Mercedes Benz GLC.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2019 Mercedes Benz GLC using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Driver Assistance Package Plus - Available; Platform: X253 - Confirmed
Driver-assist suite
Driver Assistance Package Plus - Active Distance Assist Distronic, Steering Assist, Active Brake Assist, Lane Keeping, Blind Spot Detection, 360 Camera (optional)
VIN and build split
VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.
Infotainment context
Mercedes-Benz MBUX; COMAND Online NTG5.5
Connectivity notes
Wireless CarPlay: Yes
Network and access
CAN: MB CAN-C (powertrain), CAN-B (body/comfort), MOST150 (media), FlexRay (chassis)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Mercedes XENTRY Diagnosis / Mercedes DAS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2019 Mercedes-Benz Glc. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
5 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
8 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
13 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
3 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
9 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Driver Assistance Package Plus
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: X253
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Mercedes Benz GLC issues we resolve on this platform: Front Stereo Camera (Driver Assistance Package Plus), Front Long-Range Radar (Distronic Plus / ABA), Blind Spot Assist / Rear Cross-Traffic Alert, and Parktronic / Active Parking Assist recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - X253 platform uses MB CAN-C (powertrain), CAN-B (body/comfort), MOST150 (media), FlexRay (chassis).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Driver Assistance Package Plus - Active Distance Assist Distronic, Steering Assist, Active Brake Assist, Lane Keeping, Blind Spot Detection, 360 Camera (optional)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Front Stereo Camera (Driver Assistance Package Plus) | Forward Camera | Camera | Static | YES | A253-906-20-05 | |
| Front Long-Range Radar (Distronic Plus / ABA) | Front Radar | Radar | Static | YES | A253-906-39-05 | |
| Blind Spot Assist / Rear Cross-Traffic Alert | Side Radar | Radar | Static + Dynamic | YES | A253-906-49-03 (L), A253-906-50-03 (R) | |
| Parktronic / Active Parking Assist | Ultrasonic | Ultrasonic | Static | YES | - | |
| 360-Degree Camera System (optional) | Forward Camera | Camera | Static | YES | A253-906-67-05 (CONTROLLER) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Front Stereo Camera, Active Distance Assist, Lane Keeping, Active Brake Assist
XENTRY static calibration with MB target board. MB-approved glass only. SCN coding confirmed before calibration.
Front Bumper Repair Affected: Front Long-Range Radar, Distronic Plus, ABA
Radar static alignment via XENTRY. Curb weight, level surface. Inspect bracket. SCN coding required.
Rear Bumper Repair Affected: BSD radars, Parktronic sensors
XENTRY coding confirmation. Sensor resistance check recommended.
Any Collision Affected: ACU, camera, radar, BSD, deployed airbag circuits
Full XENTRY scan mandatory. ACU replace-only. Camera and radar alignment if front end disturbed.
Any Module Replacement Affected: FSAM, RSAM, EIS, ISM, ECM, TCM, ACU
SCN online coding via XENTRY. MB server authorization mandatory. EIS triggers EIS/ISM/ECM synchronization. Note: 2019 uses M264 ECM - confirm engine code.
Forward Camera Replacement
Camera module replacement requires full recalibration using XENTRY.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using XENTRY.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using XENTRY.
Mirror Replacement
Surround view mirror camera recalibration required after mirror R&R. Use XENTRY.
SRS Modules
SRS Control Unit 13 records
Under center console
- Part number
- 0 285 011 400
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 16 07
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 18 14
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 25 12
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 85 00
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 85 18
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 86 00
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 86 18
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 94 27
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 95 27
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 96 27
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 97 27
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 98 27
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
ECU Modules
ECM - M264 2.0L Turbo (GLC 300 - 2019 engine change) A264-906-43-01
- Part number
- A264-906-43-01
- Protocol / method
- XENTRY SCN Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17.7.2 (MB M264 variant)
- Notes
- XENTRY SCN Online coding - MB server authorization mandatory. 2019 GLC 300 uses M264 engine replacing M274 - ECM part number differs from 2016-2018 GLC 300. Synchronize with EIS and ISM after replacement. Battery charger required during programming.
ECM - M177 4.0L V8 Bi-Turbo (GLC 63 AMG) A177-900-01-05
- Part number
- A177-900-01-05
- Protocol / method
- XENTRY SCN Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 (AMG variant)
- Notes
- XENTRY SCN Online. AMG-specific ECM. Synchronize with EIS and ISM.
TCM - 9G-Tronic (722.9) A725-271-00-01
- Part number
- A725-271-00-01
- Protocol / method
- XENTRY SCN Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MB/ZF proprietary
- Notes
- XENTRY SCN coding required. Shift adaptation reset and drive cycle after programming.
BCM Modules
Front SAM (Signal Acquisition Module) A253-900-14-03
- Part number
- A253-900-14-03
- Security
- SCN Coding
- Coding required
- Yes
- Cloning supported
- No
- Notes
- XENTRY SCN coding mandatory. Online MB server authorization required. VIN-coded via SCN - no clone supported. Controls exterior lighting, wipers, horn, battery sensor, comfort access relay.
Rear SAM (Signal Acquisition Module) A253-900-16-03
- Part number
- A253-900-16-03
- Security
- SCN Coding
- Coding required
- Yes
- Cloning supported
- No
- Notes
- XENTRY SCN coding mandatory. Controls tail lamps, fuel pump relay, liftgate lighting. MB server authorization required.
Electronic Ignition Switch (EIS) A253-905-26-01
- Part number
- A253-905-26-01
- Security
- mb_eis
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Replacement requires XENTRY + MB dealer network authorization. Must synchronize with ECM and ISM.
TCU / TCM Transmission Modules
TCU - 725.0 9G-Tronic 9-Speed Auto A2532708801
- Part number
- A2532708801
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Facelift model. Requires Xentry/DAS SCN coding. MB ATF 236.17. Shift adaptation reset required. VGS (Valve body Gear Shifting) module integrated.
ABS / Brake Modules
ESP/ABS Module (Bosch 9.3) A253-431-14-14
- Part number
- A253-431-14-14
- Cloning supported
- No
- Notes
- XENTRY coding required. Brake bleed cycle via XENTRY. Steering angle sensor calibration required post-replacement.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) A2539000006
- Part number
- A2539000006
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
COMAND Online (NTG5.5) A253-900-26-10
- Part number
- A253-900-26-10
- Notes
- XENTRY coding after replacement. Software update may be required to match build level.
IPC (Instrument Panel Cluster) A253-900-47-03
- Part number
- A253-900-47-03
- Notes
- XENTRY SCN coding required. Mileage in cluster and EIS must agree. Dealer authorization for mileage write.
Electronic Liftgate Module A253-905-09-01
- Part number
- A253-905-09-01
- Notes
- XENTRY variant coding. Limit stop initialization required after replacement.
Gateway / Security Modules
Central Gateway Module 8 records
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3373
- Notes
- Compatibility label: S400 W221. Door control box Notes: Read/Write
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A164. KG intelligent computer Notes: 315 MHz KG intelligent computer Notes: 433 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A166. KG intelligent computer Notes: 315 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A211. KG intelligent computer Notes: 433 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3624
- Notes
- Compatibility label: A212. KG intelligent computer Notes: 315 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3624
- Notes
- Compatibility label: C200 A212. KG intelligent computer Notes: Read/Write
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- KG intelligent computer Notes: Read/Write
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372(read-write)
- Notes
- Compatibility label: General model. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel unibody with aluminum hood, front fenders, and tailgate
- OBD Protocol
- ISO 15765-4 CAN / MB XENTRY proprietary extensions
- CAN Architecture
- MB CAN-C (powertrain), CAN-B (body/comfort), MOST150 (media), FlexRay (chassis)
- Infotainment
- COMAND Online NTG5.5
- OTA Capable
- No
- Infotainment Name
- Mercedes-Benz MBUX
- Wireless CarPlay
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2019 Mercedes Benz GLC?
ADAS calibration pricing for a 2019 Mercedes Benz GLC depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Front Stereo Camera (Driver Assistance Package Plus), Front Long-Range Radar (Distronic Plus / ABA), Blind Spot Assist / Rear Cross-Traffic Alert, Parktronic / Active Parking Assist, and 360-Degree Camera System (optional). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2019 Mercedes Benz GLC?
Yes. The 2019 Mercedes Benz GLC uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 0 285 011 400. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2019 Mercedes Benz GLC?
After windshield replacement on a 2019 Mercedes Benz GLC, Front Stereo Camera (Driver Assistance Package Plus) and 360-Degree Camera System (optional) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2019 Mercedes Benz GLC module service take?
Most 2019 Mercedes Benz GLC onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 24 programmable modules documented in our database (3 ECU, 3 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2019 Mercedes Benz GLC on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2019 Mercedes Benz GLC. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2019 Mercedes Benz GLC programming?
Every programming, cloning, and calibration job on the 2019 Mercedes Benz GLC is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2019 Mercedes Benz GLC can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2019 Mercedes Benz GLC. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 2 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 5 ADAS module
Infotainment on this platform: Mercedes-Benz MBUX. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2019 Mercedes-Benz Glc covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- A0009007221
- ECU / PCM Part Numbers
- A2562701300
- BCM / Body Module Part Numbers
- A253-900-14-03, A253-900-16-03, A253-905-26-01
- TCU / TCM Part Numbers
- A2532708801
- SRS / Airbag Module Part Numbers
- 0 285 011 400, A205 900 16 07, A205 900 18 14, A205 900 25 12, A205 900 85 00, A205 900 85 18, A205 900 86 00, A205 900 86 18, A205 900 94 27, A205 900 95 27, A205 900 96 27, A205 900 97 27, A205 900 98 27
- ABS / EBCM Part Numbers
- A0054314112
- Instrument Cluster (IPC) Part Numbers
- A2539000006
- Transmission Control Module (TCM) Part Numbers
- A2532708801
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2019 Mercedes Benz Glc
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
XENTRY Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.