VIN / Build Split
VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2024 Mercedes-Benz Glc Supported Services
2024 Mercedes-Benz Glc
ADAS calibration, module programming, and security relearns
Trims: GLC 300, GLC 300 4MATIC, AMG GLC 43, AMG GLC 63. All include ADAS and 360 camera.
Technical snapshot
- Platform C254
- CAN Architecture MB domain controller architecture - Ethernet backbone, CAN-FD (powertrain), CAN-B (body), 48V bus (EQ Boost)
- Security MB Vehicle Security Module (VSM) + ECM + MBUX triad - dealer network SCN authorization required
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2024 Mercedes Benz GLC. On this vehicle we cover documented systems include Front Multi-Mode Camera (Active Distance Assist Distronic), Front Long-Range Radar (Distronic / ABA 5), and Blind Spot Assist Plus / Rear Cross-Traffic Alert, this C254 platform vehicle, MB VSM Gen 1 C254 (SCN-coded, server-side, OTA-capable) immobilizer support, Mercedes-Benz MBUX infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
C254
Production
2016-present
Trim Levels
Trims: GLC 300, GLC 300 4MATIC, AMG GLC 43, AMG GLC 63. All include ADAS and 360 camera.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
MB domain controller architecture - Ethernet backbone, CAN-FD (powertrain), CAN-B (body), 48V bus (EQ Boost)
YEAR-SPECIFIC NOTES
Infotainment
Mercedes-Benz MBUX
Wireless Support
CarPlay: Yes / Android Auto: Yes
Exact-year service summary for 2024 Mercedes Benz GLC
ADAS coverage
This 2024 Mercedes Benz GLC page documents 6 ADAS systems, including Front Multi-Mode Camera (Active Distance Assist Distronic), Front Long-Range Radar (Distronic / ABA 5), Blind Spot Assist Plus / Rear Cross-Traffic Alert, and Front Corner Radars (Close-Range).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair, Rear Bumper Repair, and Rear Suspension or Alignment Work (Rear-Axle Steering). Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 27 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 11 gateway, immobilizer, or key-security records for this 2024 Mercedes Benz GLC.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2024 Mercedes Benz GLC using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Driver Assistance Package Plus - Available; Platform: C254 - Confirmed
Driver-assist suite
Driver Assistance Package Plus - Active Distance Assist Distronic, Active Lane Change Assist, Active Emergency Stop Assist, Blind Spot Detection Plus, Rear-Axle Steering (optional/AMG std), 360 Camera (optional)
VIN and build split
VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.
Infotainment context
Mercedes-Benz MBUX; MBUX (11.9-inch portrait display + 12.3-inch digital cockpit)
Connectivity notes
Wireless CarPlay: Yes; Wireless Android Auto: Yes
Network and access
CAN: MB domain controller architecture - Ethernet backbone, CAN-FD (powertrain), CAN-B (body), 48V bus (EQ Boost)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Mercedes XENTRY Diagnosis / Mercedes DAS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2024 Mercedes-Benz Glc. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
8 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
12 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
9 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Driver Assistance Package Plus
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: C254
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Mercedes Benz GLC issues we resolve on this platform: Front Multi-Mode Camera (Active Distance Assist Distronic), Front Long-Range Radar (Distronic / ABA 5), Blind Spot Assist Plus / Rear Cross-Traffic Alert, and Front Corner Radars (Close-Range) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - C254 platform uses MB domain controller architecture - Ethernet backbone, CAN-FD (powertrain), CAN-B (body), 48V bus (EQ Boost).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Driver Assistance Package Plus - Active Distance Assist Distronic, Active Lane Change Assist, Active Emergency Stop Assist, Blind Spot Detection Plus, Rear-Axle Steering (optional/AMG std), 360 Camera (optional)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Front Multi-Mode Camera (Active Distance Assist Distronic) | Forward Camera | Camera | Static | YES | A254-906-38-03 | |
| Front Long-Range Radar (Distronic / ABA 5) | Front Radar | Radar | Static | YES | A254-906-48-03 | |
| Blind Spot Assist Plus / Rear Cross-Traffic Alert | Side Radar | Radar | Static + Dynamic | YES | A254-906-57-03 (L), A254-906-58-03 (R) | |
| Front Corner Radars (Close-Range) | Front Radar | Radar | Static | YES | A254-906-60-03 (FL), A254-906-61-03 (FR) | |
| 360-Degree Camera System (Parking Package) | Forward Camera | Camera | Static | YES | A254-906-67-03 (CONTROLLER) | |
| Rear-Axle Steering Control Unit (optional / AMG standard) | Fused (Radar + Camera) | Fused | Static | YES | A254-460-09-03 |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Front Multi-Mode Camera, Active Distance Assist, Lane Change Assist, Emergency Stop Assist, Traffic Sign Assist
XENTRY static calibration with C254-specific MB target board. MB-approved glass only. SCN coding confirmed before calibration.
Front Bumper Repair Affected: Front Long-Range Radar, Distronic, ABA 5, Front Corner Radars
Long-range radar static alignment and corner radar static calibration via XENTRY. Curb weight, level surface. Inspect all brackets.
Rear Bumper Repair Affected: BSD Plus radars, Parktronic sensors
BSD XENTRY coding confirmation. Sensor check recommended.
Rear Suspension or Alignment Work (Rear-Axle Steering) Affected: Rear-Axle Steering System, ESP, Rear BSD Radars
Rear-axle steering reset required after any rear suspension or alignment work. XENTRY automated routine. Wheel alignment only valid after rear steering confirmed at neutral.
Any Collision Affected: ACU, camera, radars, BSD, deployed airbag circuits, 48V/HV system (if PHEV)
Full XENTRY scan mandatory. ACU replace-only. PHEV: HV safety protocol before working near battery. Camera and radar alignment required if front/rear disturbed.
Any Module Replacement Affected: FSAM, RSAM, VSM, ECM, TCM, ACU, 48V BSG, PHEV control units
SCN online coding via XENTRY. MB server authorization mandatory. VSM replacement triggers VSM/ECM/MBUX synchronization. PHEV requires HV safety precautions before module work.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using XENTRY.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using XENTRY.
Mirror Replacement
Surround view mirror camera recalibration required after mirror R&R. Use XENTRY.
SRS Modules
SRS Control Unit 12 records
Under center console
- Part number
- A2059008600
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A2059001814
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A2059001607
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A2059009827
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A2059009427
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A2059008500
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A2059008518
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A2059008618
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A2059009627
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A2059009727
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A2059002512
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A2059009527
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
ECU Modules
ECM - M254 2.0L EQ Boost 48V (GLC 300) A254-906-15-03
- Part number
- A254-906-15-03
- Protocol / method
- XENTRY SCN Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MG1CS042 (MB M254 variant)
- Notes
- XENTRY SCN Online coding - MB server authorization mandatory. M254 integrates 48V mild hybrid BSG system. ECM and BSG control unit may both require programming. Synchronize with VSM and ISM. 48V-compatible battery charger required during programming.
ECM - M139L 2.0L EQ Boost AMG (GLC 43 AMG) A139-900-86-03
- Part number
- A139-900-86-03
- Protocol / method
- XENTRY SCN Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 / MG1 (AMG M139L variant)
- Notes
- XENTRY SCN Online. AMG M139L with 48V (416hp). Synchronize with VSM and ISM. AMG-specific performance maps are server-coded.
PHEV Power Electronics Control Unit (GLC 300e) A254-906-25-03
- Part number
- A254-906-25-03
- Protocol / method
- XENTRY SCN Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental (PHEV MCU)
- Notes
- XENTRY SCN Online. GLC 300e plug-in hybrid - PHEV control unit manages HV battery, e-motor, charging systems. HV safety protocol required before any PHEV module replacement. High-voltage gloves and training required. XENTRY HV safety precaution steps mandatory.
TCM - 9G-Tronic Plus (722.9 updated) A725-271-03-01
- Part number
- A725-271-03-01
- Protocol / method
- XENTRY SCN Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MB/ZF proprietary
- Notes
- XENTRY SCN coding required. Shift adaptation reset and drive cycle after programming.
BCM Modules
Front SAM - Central Domain Controller (C254) A254-900-14-03
- Part number
- A254-900-14-03
- Security
- SCN Coding
- Coding required
- Yes
- Cloning supported
- No
- Notes
- XENTRY SCN coding mandatory. C254 domain controller architecture - Front SAM integrates gateway, exterior lighting, 48V aux, comfort access. Online MB server authorization required. No clone supported.
Rear SAM (C254) A254-900-16-03
- Part number
- A254-900-16-03
- Security
- SCN Coding
- Coding required
- Yes
- Cloning supported
- No
- Notes
- XENTRY SCN coding mandatory. Controls tail lamps, HV/fuel systems, liftgate, trailer hitch wiring. MB server authorization required.
Vehicle Security Module (C254) A254-905-26-03
- Part number
- A254-905-26-03
- Security
- MB VSM SCN
- Coding required
- Yes
- Cloning supported
- No
- Notes
- XENTRY + MB dealer network authorization required. Must synchronize with ECM, ISM, and MBUX head unit. No third-party tool support. AKL requires full MB dealer authorization.
TCU / TCM Transmission Modules
TCU - 725.0 9G-Tronic 9-Speed Auto A2542701000
- Part number
- A2542701000
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Infineon TC2xx
- Notes
- Requires Xentry PassThru for SCN online coding. MB ATF 236.17. Enhanced security - online SCN mandatory. TCU integrated in valve body.
ABS / Brake Modules
ESP/ABS Module (Bosch 9.3 Plus - C254) A254-431-12-03
- Part number
- A254-431-12-03
- Cloning supported
- No
- Notes
- XENTRY coding required. Integrates with 48V system and rear-axle steering data. Brake bleed cycle via XENTRY. Steering angle sensor calibration required. Rear-axle steering reset also required after ESP replacement.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) A 254 900 88 00
- Part number
- A 254 900 88 00
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (SRM clock spring)
Connectivity & Accessories
MBUX Central Display (11.9-inch portrait) A254-900-35-03
- Part number
- A254-900-35-03
- Notes
- XENTRY coding and MB online authorization after replacement. Touch HVAC integrated - test climate after replacement.
Digital Driver Display (12.3-inch) A254-900-47-03
- Part number
- A254-900-47-03
- Notes
- XENTRY SCN coding required. Mileage stored in VSM. Dealer authorization for mileage-related operations.
Head-Up Display (optional) A254-900-57-03
- Part number
- A254-900-57-03
- Notes
- XENTRY coding after replacement. HUD projection angle calibration via XENTRY. Windshield angle tolerance critical.
Parking Package with 360 Camera A254-906-67-03
- Part number
- A254-906-67-03
- Notes
- XENTRY coding and 4-camera static calibration. All cameras calibrated individually per C254 WIS target procedure.
Gateway / Security Modules
Central Gateway Module 8 records
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3373
- Notes
- Compatibility label: S400 W221. Door control box Notes: Read/Write
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A164. KG intelligent computer Notes: 315 MHz KG intelligent computer Notes: 433 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A166. KG intelligent computer Notes: 315 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A211. KG intelligent computer Notes: 433 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3624
- Notes
- Compatibility label: A212. KG intelligent computer Notes: 315 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3624
- Notes
- Compatibility label: C200 A212. KG intelligent computer Notes: Read/Write
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- KG intelligent computer Notes: Read/Write
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372(read-write)
- Notes
- Compatibility label: General model. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel/aluminum multi-material unibody (MRA2 architecture)
- OBD Protocol
- ISO 15765-4 CAN-FD / MB XENTRY proprietary extensions
- CAN Architecture
- MB domain controller architecture - Ethernet backbone, CAN-FD (powertrain), CAN-B (body), 48V bus (EQ Boost)
- Infotainment
- MBUX (11.9-inch portrait display + 12.3-inch digital cockpit)
- OTA Capable
- Yes
- Infotainment Name
- Mercedes-Benz MBUX
- Wireless CarPlay
- Yes
- Wireless Android Auto
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - mercedes-benz not in openpilot support tree
Not in openpilot support tree as of April 2026. Mercedes-Benz not in openpilot support tree. Sprinter and passenger cars not ported.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2024 Mercedes Benz GLC?
ADAS calibration pricing for a 2024 Mercedes Benz GLC depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Front Multi-Mode Camera (Active Distance Assist Distronic), Front Long-Range Radar (Distronic / ABA 5), Blind Spot Assist Plus / Rear Cross-Traffic Alert, Front Corner Radars (Close-Range), and 360-Degree Camera System (Parking Package). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2024 Mercedes Benz GLC?
Yes. The 2024 Mercedes Benz GLC uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: A2059008600. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2024 Mercedes Benz GLC?
After windshield replacement on a 2024 Mercedes Benz GLC, Front Multi-Mode Camera (Active Distance Assist Distronic) and 360-Degree Camera System (Parking Package) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2024 Mercedes Benz GLC module service take?
Most 2024 Mercedes Benz GLC onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 25 programmable modules documented in our database (4 ECU, 3 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2024 Mercedes Benz GLC on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2024 Mercedes Benz GLC. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2024 Mercedes Benz GLC programming?
Every programming, cloning, and calibration job on the 2024 Mercedes Benz GLC is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2024 Mercedes Benz GLC can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2024 Mercedes Benz GLC. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 2 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Infotainment on this platform: Mercedes-Benz MBUX. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2024 Mercedes-Benz Glc covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- A254-906-38-03, A254-906-48-03, A254-906-57-03 (L), A254-906-58-03 (R), A254-906-60-03 (FL), A254-906-61-03 (FR), A254-906-67-03 (CONTROLLER), A254-460-09-03
- ECU / PCM Part Numbers
- A254-906-15-03, A139-900-86-03
- BCM / Body Module Part Numbers
- A254-900-14-03, A254-900-16-03, A254-905-26-03
- TCU / TCM Part Numbers
- A2542701000
- SRS / Airbag Module Part Numbers
- A2059008600, A2059001814, A2059001607, A2059009827, A2059009427, A2059008500, A2059008518, A2059008618, A2059009627, A2059009727, A2059002512, A2059009527
- ABS / EBCM Part Numbers
- A254-431-12-03
- Instrument Cluster (IPC) Part Numbers
- A 254 900 88 00
- Transmission Control Module (TCM) Part Numbers
- A2542701000
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2024 Mercedes Benz Glc
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
XENTRY Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.