VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Lexus WMI: JTH, 2T2. Position 4-5 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2024 Lexus Lx Supported Services
2024 Lexus Lx
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform J310 (LX 4th Gen, 2022-present)
- CAN Architecture CAN Bus (HS-CAN, MS-CAN), LIN Bus, Ethernet backbone (multimedia / camera)
- Security Toyota Advanced Key (TAK) / DST-AES 128-bit immobilizer
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2024 Lexus LX. On this vehicle we cover documented systems include Pre-Collision System with Pedestrian and Cyclist Detection (PCS), Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Blind Spot Monitor (BSM) / Rear Cross Traffic Alert (RCTA), this J310 (LX 4th Gen, 2022-present) platform vehicle, G4+ (DST-AES 128-bit, Toyota Advanced Key) immobilizer support, Lexus Interface Multimedia infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
J310 (LX 4th Gen, 2022-present)
Production
2008-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
4WD
Engine
-
CAN Speed
CAN Bus (HS-CAN, MS-CAN), LIN Bus, Ethernet backbone (multimedia / camera)
YEAR-SPECIFIC NOTES
Infotainment
Lexus Interface Multimedia
Wireless Support
CarPlay: Yes / Android Auto: Yes
Exact-year service summary for 2024 Lexus LX
ADAS coverage
This 2024 Lexus LX page documents 7 ADAS systems, including Pre-Collision System with Pedestrian and Cyclist Detection (PCS), Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Monitor (BSM) / Rear Cross Traffic Alert (RCTA), and Adaptive Cruise Control with Stop-and-Go (ACC).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair, and Suspension, Lift, or Off-Road Modification. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 33 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2024 Lexus LX.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2024 Lexus LX using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Lexus Safety System+ 3.0 (LSS+ 3.0): Pre-Collision System, Lane Departure Alert/ - Available; Platform: J310 (LX 4th Gen, 2022-present) - Confirmed
Driver-assist suite
Lexus Safety System+ 3.0 (LSS+ 3.0): Pre-Collision System, Lane Departure Alert/Lane Tracing Assist, Adaptive Cruise Control with Stop-and-Go, Automatic High Beams, Blind Spot Monitoring, Rear Cross-Traffic Alert, Safe Exit Alert, Front Cross Traffic Alert
VIN and build split
VIN pos 4-8 identifies model/body/engine. Lexus WMI: JTH, 2T2. Position 4-5 = model code. Position 10 = model year code.
Infotainment context
Lexus Interface Multimedia; Lexus Interface multimedia system (14-inch touchscreen, wireless Apple CarPlay / Android Auto, Mark Levinson 25-speaker audio)
Connectivity notes
Wireless CarPlay: Yes; Wireless Android Auto: Yes
Network and access
CAN: CAN Bus (HS-CAN, MS-CAN), LIN Bus, Ethernet backbone (multimedia / camera)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2024 Lexus Lx. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
7 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
2 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
19 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
9 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Lexus Safety System+ 3.0 (LSS+ 3.0): Pre-Collision System, Lane Departure Alert/
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: J310 (LX 4th Gen, 2022-present)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Lexus LX issues we resolve on this platform: Pre-Collision System with Pedestrian and Cyclist Detection (PCS), Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Monitor (BSM) / Rear Cross Traffic Alert (RCTA), and Adaptive Cruise Control with Stop-and-Go (ACC) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - J310 (LX 4th Gen, 2022-present) platform uses CAN Bus (HS-CAN, MS-CAN), LIN Bus, Ethernet backbone (multimedia / camera).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Lexus Safety System+ 3.0 (LSS+ 3.0): Pre-Collision System, Lane Departure Alert/Lane Tracing Assist, Adaptive Cruise Control with Stop-and-Go, Automatic High Beams, Blind Spot Monitoring, Rear Cross-Traffic Alert, Safe Exit Alert, Front Cross Traffic Alert
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Pre-Collision System with Pedestrian and Cyclist Detection (PCS) | Fused (Forward Camera + Millimeter-Wave Radar) | Fused | Static | YES | 88210-60R30 (RADAR), 86790-60R30 (CAMERA) | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) | Forward Camera | Camera | Static | YES | 86790-60R30 | |
| Blind Spot Monitor (BSM) / Rear Cross Traffic Alert (RCTA) | Rear Side Radar | Radar | Static + Dynamic | YES | 88162-60R30 (L), 88163-60R30 (R) | |
| Adaptive Cruise Control with Stop-and-Go (ACC) | Millimeter-Wave Radar | Radar | Static | YES | 88210-60R30 | |
| Front Cross Traffic Alert (FCTA) | Millimeter-Wave Radar | Radar | Static | YES | 88210-60R30 (SHARED FRONT RADAR) | |
| Safe Exit Alert (SEA) | Rear Side Radar | Radar | Static | YES | 88162-60R30, 88163-60R30 | |
| Panoramic View Monitor (PVM) | Forward Camera | Camera | Static | YES | 86804-60R30 (DISPLAY ECU) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: PCS Camera, LDA/LTA Camera, AHB Camera
Forward camera static calibration via Techstream. Vehicle level, calibration target per J310 service manual. LSS+ 3.0 camera is sensitive to windshield variance - Toyota-approved glass only.
Front Bumper Repair or Replacement Affected: PCS Radar, ACC Radar, FCTA
Front radar static alignment via Techstream. LX frequently off-road modified - inspect bracket carefully and verify aim after any suspension change or skid plate installation.
Rear Bumper Repair Affected: BSM Radar (L/R), RCTA, Safe Exit Alert
Rear BSM radar calibration via Techstream. Confirm rear fascia gap within J310 spec.
Suspension, Lift, or Off-Road Modification Affected: Skid Control ECU, Steering Angle Sensor, PCS Radar, BSM, KDSS (if equipped)
Steering angle sensor zero-point calibration mandatory after any suspension work. Front and rear radar aim verification required after any ride height change. KDSS calibration required if KDSS components disturbed. LX is a highly modified off-road platform - ADAS calibration is frequently overlooked after lift kits.
Any Collision Affected: SRS ECU, all airbag and pretensioner circuits (3 rows)
Full SRS scan mandatory. Crash data in SRS ECU. 3-row LX - inspect all satellite sensors and pretensioners for all rows before clearing. Do not clear without confirming physical integrity of all SRS components.
Any Module Replacement Affected: All Techstream-programmed modules
Techstream programming and VIN registration on all replacements. Key re-registration required after BCM or SKS replacement. OTA platform - confirm software strategy match before ordering.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using Techstream.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using Techstream.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.
SRS Modules
SRS Control Unit 11 records
Under center console
- Part number
- 89170601701523006081
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
- Part number
- 89170601801523006091
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
- Part number
- 89170601711523000451
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
- Part number
- 8917060250
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
- Part number
- 8917060290
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
- Part number
- 8917060240
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
- Part number
- 8917060150
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
- Part number
- 8917060260
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
- Part number
- 8917060281
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
- Part number
- 8917060390
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
- Part number
- 8917060241
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit (variant) 8 records
ECU Modules
ECM - 3.4L Twin-Turbo V6 (V35A-FTS) 89661-60R30
- Part number
- 89661-60R30
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas RH850/U2B (Denso Dynamic Force-era MCU; verify exact part via bench inspection)
- Notes
- Techstream Programming Port programming. VIN registration required. Immobilizer data linked to SKS ECU - both may need synchronized registration if ECM replaced alone. Battery SOC >=80%.
TCM - 10-Speed Automatic (10AT) 89535-60R30
- Part number
- 89535-60R30
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Denso MCU
- Notes
- 10-speed automatic on J310. Techstream Programming Port programming. Shift adaptation learning reset required after replacement. Allow normal driving for full adaptation - 50-100 miles minimum.
BCM Modules
Body ECU 89221-60R30
- Part number
- 89221-60R30
- Security
- DST-AES
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- Techstream registration required. DST-AES 128-bit - all key FOB registration must be re-performed via Techstream after BCM replacement. Controls door locks, lighting, power tailgate, running boards, and all body accessories.
Smart Key ECU 89990-60R30
- Part number
- 89990-60R30
- Security
- DST-AES
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Toyota Advanced Key / Smart Entry and Push Start. Cannot clone - fresh registration required. Techstream key registration of all FOBs mandatory after SKS replacement. Minimum 1 registered key required to complete procedure.
Gateway Module (GWM) 89227-60R30
- Part number
- 89227-60R30
- Security
- uds
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Manages CAN/Ethernet network bridging on J310. Techstream programming required after replacement. OTA coordination routes through this module. Software update may cascade to ADAS modules.
TCU / TCM Transmission Modules
TCU - Direct Shift 10AT 10-Speed Auto 35530-60520
- Part number
- 35530-60520
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas RH850/P1M
- Notes
- Requires Lexus Techstream or J2534 for programming. Toyota WS ATF fluid spec. Security gateway bypass required. Adaptive relearn via extended drive cycle.
ABS / Brake Modules
Skid Control ECU (ABS/VSC/TRAC/KDSS) 44510-60R30
- Part number
- 44510-60R30
- Cloning supported
- Yes
- Notes
- Techstream registration required. Steering angle sensor zero-point calibration required via Techstream. Brake fluid bleed cycle recommended after replacement.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 83800-60850
- Part number
- 83800-60850
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 83800-60860
- Part number
- 83800-60860
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (spiral cable 84306 family)
Connectivity & Accessories
Display Audio ECU (Lexus Interface 14-inch) 86804-60R30
- Part number
- 86804-60R30
- Notes
- Lexus Interface system with 14-inch touchscreen. Wireless CarPlay/Android Auto. Techstream configuration after replacement.
Mark Levinson Audio Amplifier 86280-60R30
- Part number
- 86280-60R30
- Notes
- 25-speaker Mark Levinson Reference audio system. Techstream initialization after amplifier replacement.
Power Back Door ECU 85830-60R30
- Part number
- 85830-60R30
- Notes
- Techstream initialization after replacement. Door height position learning required via active test. DTC B2799 if immobilizer not properly synchronized.
KDSS Control ECU (if equipped) 89270-60R30
- Part number
- 89270-60R30
- Notes
- Kinetic Dynamic Suspension System. Techstream initialization and calibration required after replacement. KDSS pressure learning procedure required - follow J310 service manual procedure precisely.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Body-on-frame - TNGA-F ladder frame, high-strength steel
- OBD Protocol
- ISO 15765-4 CAN (500 kbps) / CAN-FD on select networks
- CAN Architecture
- CAN Bus (HS-CAN, MS-CAN), LIN Bus, Ethernet backbone (multimedia / camera)
- Infotainment
- Lexus Interface multimedia system (14-inch touchscreen, wireless Apple CarPlay / Android Auto, Mark Levinson 25-speaker audio)
- OTA Capable
- Yes
- Infotainment Name
- Lexus Interface Multimedia
- Wireless CarPlay
- Yes
- Wireless Android Auto
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. LX 570/600 not in CARS.md.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2024 Lexus LX?
ADAS calibration pricing for a 2024 Lexus LX depends on which of its 7 documented systems need work after a repair. This vehicle is documented with Pre-Collision System with Pedestrian and Cyclist Detection (PCS), Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Monitor (BSM) / Rear Cross Traffic Alert (RCTA), Adaptive Cruise Control with Stop-and-Go (ACC), and Front Cross Traffic Alert (FCTA). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2024 Lexus LX?
Yes. The 2024 Lexus LX uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 89170601701523006081. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2024 Lexus LX?
After windshield replacement on a 2024 Lexus LX, Pre-Collision System with Pedestrian and Cyclist Detection (PCS) and Lane Keep Assist / Lane Departure Warning (LKA/LDW) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2024 Lexus LX module service take?
Most 2024 Lexus LX onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 15 programmable modules documented in our database (2 ECU, 3 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2024 Lexus LX on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2024 Lexus LX. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2024 Lexus LX programming?
Every programming, cloning, and calibration job on the 2024 Lexus LX is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2024 Lexus LX can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2024 Lexus LX. For this vehicle our database documents:
- 2 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 7 ADAS module
Infotainment on this platform: Lexus Interface Multimedia. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2024 Lexus Lx covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 88210-60R30 (RADAR), 86790-60R30 (CAMERA), 86790-60R30, 88162-60R30 (L), 88163-60R30 (R), 88210-60R30, 88210-60R30 (SHARED FRONT RADAR), 88162-60R30, 88163-60R30, 86804-60R30 (DISPLAY ECU)
- ECU / PCM Part Numbers
- 89661-60R30
- BCM / Body Module Part Numbers
- 89221-60R30, 89990-60R30, 89227-60R30
- TCU / TCM Part Numbers
- 35530-60520
- SRS / Airbag Module Part Numbers
- 89170601701523006081, 89170601801523006091, 89170601711523000451, 8917060250, 8917060290, 8917060240, 8917060150, 8917060260, 8917060281, 8917060390, 8917060241
- ABS / EBCM Part Numbers
- 44050-60R30, 44050-60R40
- Instrument Cluster (IPC) Part Numbers
- 83800-60850, 83800-60860
- Transmission Control Module (TCM) Part Numbers
- 35530-60520
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (SPIRAL CABLE 84306 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2024 Lexus LX
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Techstream / GTS+ Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.