We provide the software and equipment for the agreed work. The exact tool and procedure depend on your year, VIN and module.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
1st Gen WS - 2022-2026 generation coverage
2022-2026 Jeep Grand Wagoneer service guide ADAS Calibration & Module Programming
Choose a repair service below or find your module by part number. Onsite help is available in Dallas-Fort Worth, with mail-in module service nationwide.
What do you need fixed?
Choose a service to start your quote.
Find your module
14 documented Jeep Grand Wagoneer module records across the 2022-2026 generation. Search by module name or part number, then open a result for requirements and repair options.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ECU / Engine
ECM/PCM - 6.4L HEMI V8 (Series I standard) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- wiTECH 2.0 + Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Notes
- wiTECH 2.0 flash programming via Programming Port + DealerConnect calibration download. PROXI alignment after replacement (VIN tie).
ECM/PCM - 6.2L SRT Hellcat V8 (Series III, optional) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- wiTECH 2.0 + Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Notes
- wiTECH 2.0 flash programming via Programming Port + DealerConnect calibration download. PROXI alignment after replacement (VIN tie). Performance tune transfer required.
ECM/PCM - 3.0L Hurricane I6 Turbo (2023+) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- wiTECH 2.0 + Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Notes
- wiTECH 2.0 flash programming via Programming Port + DealerConnect calibration download. PROXI alignment after replacement (VIN tie).
TCM / Transmission
TCU - 8HP70 8-Speed Auto Verify by VIN 2022-2023 68RFE
Documented for 2022-2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023
Donor must match part family 68RFE - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68RFE
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- ZF TC1797
- Notes
- VIN coding mandatory, TCU relearn via StarSCAN, ATF ZF Lifeguard 8, shifter calibration required
TCU - 8HP75 8-Speed Auto Verify by VIN 2024-2025 68489
Documented for 2024-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025
Donor must match part family 68489 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68489
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Requires StarSCAN/wiTECH programming, TCM adaptive relearn, ATF spec ZF Lifeguard 8, transmission control module initialization required
TCU - 8HP75 8-Speed Auto Verify by VIN 2026 68RFE
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Donor must match part family 68RFE - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68RFE
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- ZF 8HP75 transmission, requires StarSCAN or WiTech tool, ATF spec ZF Lifeguard 8, TCU adaptation required after installation
BCM / Body electronics
Body Control Module (BCM) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Security
- SKREEM/rolling code
- Coding required
- Yes
- Cloning supported
- No
- Notes
- wiTECH 2.0 flash programming + PROXI alignment after replacement. BCM holds VIN tie and module configuration. All vehicle options must be PROXI configured. SGW bypass required for programming access.
SRS / Airbag
Occupant Restraint Controller (ORC) Verify by VIN 68476781AC
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68476781AC
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) Verify by VIN 2023 68425814AF
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68425814AF
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
ABS / Brakes
ABS/ESC Module Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Cloning supported
- No
- Notes
- wiTECH ABS module initialization after replacement. 4-wheel brake bleed. SAS zero-point calibration. Verify ESC function DTC-free.
Other modules
Instrument Panel Cluster (IPC) Verify by VIN 2022-2024 68350141AL
Documented for 2022-2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024
Donor must match part family 68350141AL - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68350141AL
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2025-2026 68X AA
Documented for 2025-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025, 2026
Donor must match part family 68X AA - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 68X AA
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (SCCM clock spring) - Mopar 68553022AD
Connectivity / Accessories
Uconnect Infotainment (Uconnect 5 12.3" multi-screen) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- wiTECH radio programming/initialization if replaced. CarPlay/Android Auto pairing re-establishment post-swap.
Reference information for 2022-2026. Coverage can vary by year and equipment. Confirm the VIN and full part number before ordering a replacement.
Vehicle overview
- Vehicle
- Jeep Grand Wagoneer
- Model years
- 2022-2026
- Generation
- 1st Gen WS
- Platform
- WS
Tools we use for this vehicle
Factory scan, coding, and calibration access
Stellantis wiTECH 2.0
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Tool requirements
Basic OBD2 scanner
View capabilities and limitations
Supported work
- Read codes on SRS systems (2 documented rows)
- Read codes on ECU systems (3 documented rows)
- Read codes on BCM systems (1 documented row)
- Read codes on TCU / TCM systems (3 documented rows)
- Read codes on ABS systems (1 documented row)
- Read codes on IPC / SAS systems (3 documented rows)
- Read codes on Keys systems (1 documented row)
- Read codes on Immobilizer systems (1 documented row)
- Read codes on Accessory systems (1 documented row)
Limitations
- Keys programming, coding, cloning, or security work (1 documented row)
- Immobilizer programming, coding, cloning, or security work (1 documented row)
Professional scan tool
View capabilities and limitations
Supported work
- Keys OBD coding support (1 documented row)
Limitations
- Immobilizer bench, clone, or dealer security rows (1 documented row)
Factory programming software (J2534)
View capabilities and limitations
Supported work
- Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Dealer or specialist
View capabilities and limitations
Supported work
- Immobilizer dealer security rows (1 documented row)
Dealer security and specialist module work should be scoped by VIN before you buy parts or pay for programming.
Get a QuoteKnow this platform
This platform uses HS-CAN (500 kbps); Stellantis network; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN (500 kbps); Stellantis network; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - grand-wagoneer not in openpilot support tree
Not in openpilot support tree as of April 2026.
Generation service summary for Jeep Grand Wagoneer 1st Gen WS (2022-2026)
Generation coverage
This page consolidates Jeep Grand Wagoneer service data for 2022-2026 across 5 model years; service information is available for 5 years.
Choose a yearADAS coverage
Merged ADAS coverage includes 7 system records, including Forward Camera (Monocular) - FCW/LDW, Forward Radar (77GHz) - ACC/AEB, Blind Spot Monitor (BSM), and Rear View Camera. Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 8 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 14 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, and security-access planning for the Jeep Grand Wagoneer 2022-2026 span, with exact-year validation before service. Mail-in module service is available nationwide.
Get a quoteDo I need calibration?
Windshield Replacement (Camera Equipped) 1
2022-2026
required
wiTECH ADAS guided static calibration required. Level surface, WSM target distance.
Forward Camera Replacement 1
2022-2026
required
wiTECH 2.0 static calibration mandatory. SGW bypass required.
Front Bumper Repair or Replacement 1
2022-2026
required
wiTECH radar alignment if forward radar equipped.
Rear Bumper Repair or Replacement 1
2022-2026
required
wiTECH BSM/RCTA initialization if equipped.
Airbag/SRS Deployment 1
2022-2026
required
ORC replacement only (no crash clear). wiTECH initialization post-install.
BCM Replacement 1
2022-2026
required
wiTECH 2.0 flash + PROXI alignment + all options config. SGW bypass required.
ECM Replacement 1
2022-2026
required
wiTECH 2.0 flash + DealerConnect calibration + PROXI alignment.
ABS/ESC Module Replacement 1
2022-2026
required
wiTECH init + 4-wheel bleed + SAS zero-point.
Year-by-year details
| Year | Trim notes |
|---|---|
| 2022 | All trims equipped with Jeep Active Safety Group require forward camera recalibration after windshield replacement. Use WiTECH 2.0 with Stellantis SGW gateway bypass to confirm trim-level ADAS package and complete calibration procedure per OEM specification. |
| 2023 | All trims equipped with Jeep Active Safety Group require forward camera recalibration after windshield replacement. Use WiTECH 2.0 with Stellantis SGW gateway bypass to confirm trim-level ADAS package and complete calibration procedure per OEM specification. |
| 2024 | All trims equipped with Jeep Active Safety Group require forward camera recalibration after windshield replacement. Use WiTECH 2.0 with Stellantis SGW gateway bypass to confirm trim-level ADAS package and complete calibration procedure per OEM specification. |
| 2025 | All trims equipped with Jeep Active Safety Group require forward camera recalibration after windshield replacement. Use WiTECH 2.0 with Stellantis SGW gateway bypass to confirm trim-level ADAS package and complete calibration procedure per OEM specification. |
| 2026 | All trims equipped with Jeep Active Safety Group require forward camera recalibration after windshield replacement. Use WiTECH 2.0 with Stellantis SGW gateway bypass to confirm trim-level ADAS package and complete calibration procedure per OEM specification. |
7 ADAS systems documented across the 2022-2026 generation. Rows that apply to only part of the generation carries a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Jeep Active Safety Plus: Full Speed Forward Collision Alert, Night Vision Camera (optional), Blind Spot Detection, LaneSense, Adaptive Cruise, Surround View, Parallel/Perpendicular Park Assist
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) - FCW/LDW | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (77GHz) - ACC/AEB | Forward Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor (BSM) | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - | |
| ParkSense PDC (Ultrasonic) | Park Assist | Ultrasonic | None | YES | - | |
| Surround View Camera System | Surround View | Camera | Static | YES | - | |
| Night Vision Camera (optional) | Night Vision | Camera | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement (Camera Equipped)
wiTECH ADAS guided static calibration required. Level surface, WSM target distance.
Forward Camera Replacement
wiTECH 2.0 static calibration mandatory. SGW bypass required.
Front Bumper Repair or Replacement
wiTECH radar alignment if forward radar equipped.
Rear Bumper Repair or Replacement
wiTECH BSM/RCTA initialization if equipped.
Airbag/SRS Deployment
ORC replacement only (no crash clear). wiTECH initialization post-install.
BCM Replacement
wiTECH 2.0 flash + PROXI alignment + all options config. SGW bypass required.
ECM Replacement
wiTECH 2.0 flash + DealerConnect calibration + PROXI alignment.
ABS/ESC Module Replacement
wiTECH init + 4-wheel bleed + SAS zero-point.
2 gateway, immobilizer, and security items documented across the 2022-2026 generation.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Full-frame BOF; aluminum hood and doors; premium appointments
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps); Stellantis network; OBD2 DLC Pin 6/14
- Infotainment
- Uconnect 5 12.3" + 10.25" passenger + 10.25" rear; McIntosh audio; OTA via Jeep Connect
- OTA Capable
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
WHAT WE RESOLVE
1st Gen WS (2022-2026) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Camera (Monocular) - FCW/LDW, Forward Radar (77GHz) - ACC/AEB, Blind Spot Monitor (BSM), and Rear View Camera. Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve Occupant Restraint Controller (ORC) and Occupant Restraint Controller (ORC) (2023). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Jeep Grand Wagoneer (2022-2026) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Jeep Grand Wagoneer (2022-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Jeep Grand Wagoneer (2022-2026)?
The Jeep Grand Wagoneer (2022-2026) generation currently shows 10 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include Occupant Restraint Controller (ORC) and Occupant Restraint Controller (ORC) (2023). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 68476781AC - confirm for your exact year/VIN.
Does Jeep Grand Wagoneer (2022-2026) need ADAS calibration after glass or collision work?
The merged generation data documents 7 ADAS systems, including Forward Camera (Monocular) - FCW/LDW, Forward Radar (77GHz) - ACC/AEB, Blind Spot Monitor (BSM), Rear View Camera, and ParkSense PDC (Ultrasonic). Calibration triggers include Windshield Replacement (Camera Equipped), Forward Camera Replacement, Front Bumper Repair or Replacement, and Rear Bumper Repair or Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Jeep Grand Wagoneer (2022-2026)?
Yes. The generation data includes 2 SRS records, including Occupant Restraint Controller (ORC) and Occupant Restraint Controller (ORC) (2023). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 68476781AC - confirm for your exact year/VIN.
Do all Jeep Grand Wagoneer (2022-2026) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2022-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
How long does service take for Jeep Grand Wagoneer (2022-2026)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Is Jeep Grand Wagoneer (2022-2026) service mobile or mail-in?
Mobile service covers DFW on-vehicle diagnostics, post-repair coding, and supported module work. Mail-in module service is available nationwide. We confirm the active path for your exact year, VIN, module, and requested scope before service.
More Grand Wagoneer generations
1st Gen WS 2022-2026 You are here
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
wiTECH 2.0 Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.