Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2026 Jaguar I-Pace Supported Services

2026 Jaguar I-Pace

ADAS calibration, module programming, and security relearns

Trim and package availability varies by market for the 2026 Jaguar I-Pace. Confirm specific ADAS fitment before calibration.

Technical snapshot
  • Platform Jaguar I-PACE dedicated BEV platform (aluminum-intensive monocoque, 90kWh battery floor)
  • CAN Architecture HS-CAN + CANFD; JLR EV network (high-voltage BMS integration); OBD2 DLC Pin 6/14
  • Security Jaguar Smart Key PEPS; NFC digital key (phone as key); rolling code; JLR SDD programmed

What do you need fixed?

Choose a service to start your quote.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2026 Jaguar I-Pace. On this vehicle we cover documented systems include Forward Camera (Mobileye EyeQ4), Forward Radar (Continental ARS) - ACC/AEB, and Blind Spot Monitor - Left Rear Radar, this Jaguar I-PACE dedicated BEV platform (aluminum-intensive monocoque, 90kWh battery floor) platform vehicle, Jaguar Smart Key PEPS + NFC digital key; BMS-integrated rolling immobilizer; JLR SDD immobilizer support, OEM-gateway-subscription work handled on our side. Mobile across the DFW Metroplex; mail-in module service is available nationwide.

Platform
Jaguar I-PACE dedicated BEV platform (aluminum-intensive monocoque, 90kWh battery floor)
Production
2019-present
Trim Levels
Trim and package availability varies by market for the 2026 Jaguar I-Pace. Confirm specific ADAS fitment before calibration.
Drivetrain
AWD
Engine
-
CAN Speed
HS-CAN + CANFD; JLR EV network (high-voltage BMS integration); OBD2 DLC Pin 6/14
SERVICE SNAPSHOT

Exact-year service summary for 2026 Jaguar I-Pace

ADAS coverage

This 2026 Jaguar I-Pace page documents 7 ADAS systems, including Forward Camera (Mobileye EyeQ4), Forward Radar (Continental ARS) - ACC/AEB, Blind Spot Monitor - Left Rear Radar, and Blind Spot Monitor - Right Rear Radar.

View ADAS data

Calibration triggers

Documented calibration triggers include Windshield replacement, Front bumper removal / front radar disturbed, Rear bumper removal / rear radar disturbed, and Door mirror removal (wing mirror replacement). Use the ADAS tab for the full trigger list.

View triggers

Programmable modules

This page indexes 16 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

Security notes for this 2026 Jaguar I-Pace include gateway type: JLR Secure Gateway; bypass method: TOPIx Cloud / Pathfinder authorized access; subscription: Yes.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2026 Jaguar I-Pace using the documented systems and module data on this page.

Choose a section
EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

JLR Driver Assistance Full: Adaptive Cruise with Queue Assist, Autonomous Emerge - Available; Platform: Jaguar I-PACE dedicated BEV platform (aluminum-intensive mon - Confirmed

Driver-assist suite

JLR Driver Assistance Full: Adaptive Cruise with Queue Assist, Autonomous Emergency Braking, Lane Keep Assist, Blind Spot Assist, ClearSight 360° Surround View, Reverse Traffic Detection, NFC digital key

Infotainment context

Pivi Pro 11.4" main touchscreen + 5.5" climate/audio lower screen; JLR OTA; wireless CarPlay/Android Auto

Network and access

CAN: HS-CAN + CANFD; JLR EV network (high-voltage BMS integration); OBD2 DLC Pin 6/14; gateway: JLR Secure Gateway; gateway subscription: Yes

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

JLR SDD / JLR Pathfinder

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

Security gateway access required No practical workaround

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2026 Jaguar I-Pace. Counts reflect modules our techs have programmed or calibrated on this exact platform.

Need something not listed? Most undocumented modules can still be programmed.

Get a Quote
Feature availability 2

JLR Driver Assistance Full: Adaptive Cruise with Queue Assist, Autonomous Emerge

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

Platform: Jaguar I-PACE dedicated BEV platform (aluminum-intensive mon

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Jaguar I-Pace issues we resolve on this platform: Forward Camera (Mobileye EyeQ4), Forward Radar (Continental ARS) - ACC/AEB, Blind Spot Monitor - Left Rear Radar, and Blind Spot Monitor - Right Rear Radar recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Jaguar I-PACE dedicated BEV platform (aluminum-intensive monocoque, 90kWh battery floor) platform uses HS-CAN + CANFD; JLR EV network (high-voltage BMS integration); OBD2 DLC Pin 6/14. JLR Secure Gateway module faults requiring OEM subscription access for full read/write (handled on our side).

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

JLR Driver Assistance Full: Adaptive Cruise with Queue Assist, Autonomous Emergency Braking, Lane Keep Assist, Blind Spot Assist, ClearSight 360° Surround View, Reverse Traffic Detection, NFC digital key

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Forward Camera (Mobileye EyeQ4)Forward CameraCameraStatic YES-
Forward Radar (Continental ARS) - ACC/AEBFront RadarRadarStatic + Dynamic YES-
Blind Spot Monitor - Left Rear RadarSide RadarRadarStatic + Dynamic YES-
Blind Spot Monitor - Right Rear RadarSide RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC)Rear CameraCameraNone YES-
ClearSight Surround View / 360° Camera SystemSurround CameraCameraStatic YES-
PDC - Front and Rear Ultrasonic Parking SensorsParking SensorUltrasonicNone YES-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

Windshield replacement Affected: Forward camera, AEB (EVA 2.0), ADAS camera

Forward-facing camera bracket disturbed - static calibration required via PATHFINDER followed by road drive dynamic calibration. AEB and LKA disabled until complete. JLR Drive Pro Pack EVA 2.0 required.

Front bumper removal / front radar disturbed Affected: Forward radar, AEB, ACC

Front radar recalibration (static + dynamic) via PATHFINDER. ACC and AEB inoperative until calibration complete.

Rear bumper removal / rear radar disturbed Affected: Rear traffic alert, rear radar

Rear radar recalibration via PATHFINDER. Rear traffic monitoring disabled until complete.

Door mirror removal (wing mirror replacement) Affected: Blind spot monitoring (BSM), Lane change assist

Blind spot sensors in mirrors require calibration via PATHFINDER if equipped. Confirm BSM fitment in options file.

Wheel alignment / suspension work Affected: Parking sensors, steering angle sensor, surround cameras

Steering angle sensor reset and parking sensor calibration via PATHFINDER after any geometry change or alignment.

HV battery or powertrain module replacement Affected: BMS, regen braking, HV interlock

Battery Management System re-initialisation and HV interlock verification required via PATHFINDER. Regen braking calibration must be confirmed post-replacement.

Brake system work (IPB replacement) Affected: Integrated Power Brake, ABS, regen braking blend

Full IPB initialisation and bleed sequence via PATHFINDER. Regen/friction blending recalibration required.

SRS Modules

SRS Control Module (Airbag ECU / RCM)
Notes
Jaguar I Pace 2026: Restraints Control Module (RCM). JLR SDD coding and configuration required after replacement. VIN-matched unit required.

ECU Modules

Engine Control Module (ECM)
Protocol / method
OBD
Security
IMMO 4 / AES (JLR-specific)
Coding required
Yes
Cloning supported
No
Notes
ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Online server authentication required. Cloning not supported on 2018+ VIN-locked units.
Transmission Control Module (TCM)
Protocol / method
OBD
Security
IMMO 4 / AES (JLR-specific)
Coding required
Yes
Cloning supported
No
Notes
TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning not supported.
Body Control Module (BCM)
Protocol / method
OBD
Security
IMMO 4 / AES (JLR-specific)
Coding required
Yes
Cloning supported
No
Notes
BCM requires coding to vehicle VIN after replacement. Security gateway access required on 2018+ models. All comfort/convenience modules must be re-synced via our diagnostic software.

BCM Modules

Body Control Module (BCM)
Security
KESSY (Keyless Entry Start Stop System); HV interlock integration
Coding required
Yes
Cloning supported
No
Notes
I-PACE EV: BCM integrates with HV interlock and DCFC communication. HV system must be de-energised before BCM work. Use PATHFINDER for programming. VIN coding + option file transfer required.

TCU / TCM Transmission Modules

N/A - Single Speed / No TCU
Protocol / method
OBD
Coding required
No
Cloning supported
No
Chip / MCU
N/A
Notes
Pure EV with single-speed reduction gear. No traditional TCU. Drive unit control integrated into inverter module. Jaguar SDD/Pathfinder required for motor controller updates.
N/A - Single Speed / No TCU
Protocol / method
OBD
Coding required
No
Cloning supported
No
Chip / MCU
N/A
Notes
Pure EV with single-speed reduction gear. No traditional TCU. Drive unit control integrated into inverter module. Jaguar SDD/Pathfinder required for motor controller updates.

ABS / Brake Modules

ABS/ESC + Integrated Power Brake (IPB) Module
Cloning supported
No
Notes
I-PACE: Integrated Power Brake system - replacement requires full brake system initialisation and bleed via PATHFINDER. HV interlock verification required before work. Regen braking calibration required post-replacement.

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) LR108320
Part number
LR108320
Cloning supported
Yes
Notes
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) LR108321
Part number
LR108321
Cloning supported
Yes
Notes
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
INTEGRATED (SAS in clock spring)

Connectivity & Accessories

Pivi Pro 11.4" main touchscreen + 5.5" climate/audio lower s
Notes
Programming required after replacement. Verify software version compatibility before install.
Remote Start
Notes
Factory remote start. BCM configuration required after replacement on equipped vehicles.
HV Battery Management System
Notes
High-voltage safety protocols required. De-energize HV system before any service. Manufacturer scan tool required for HV diagnostics.
Onboard Charger Module
Notes
L1/L2 AC charging module. Programming required after replacement to restore charge profiles.
Telematics Control Unit (TCU)
Notes
Cellular connectivity module. Subscription activation required post-replacement. VIN registration with manufacturer.
ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
Aluminum-intensive monocoque; integrated battery structural floor; BEV only
OBD Protocol
ISO 15765-4 CAN (500 kbps)
CAN Architecture
HS-CAN + CANFD; JLR EV network (high-voltage BMS integration); OBD2 DLC Pin 6/14
Infotainment
Pivi Pro 11.4" main touchscreen + 5.5" climate/audio lower screen; JLR OTA; wireless CarPlay/Android Auto
OTA Capable
Yes
Gateway Type
JLR Secure Gateway
Gateway Bypass Method
TOPIx Cloud / Pathfinder authorized access
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Contact us
OPENPILOT / COMMA.AI

Openpilot Compatibility

Not Supported

Not supported - jaguar not in openpilot support tree

Not in openpilot support tree as of April 2026. Jaguar not in openpilot support tree.

FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2026 Jaguar I-Pace?

ADAS calibration pricing for a 2026 Jaguar I-Pace depends on which of its 7 documented systems need work after a repair. This vehicle is documented with Forward Camera (Mobileye EyeQ4), Forward Radar (Continental ARS) - ACC/AEB, Blind Spot Monitor - Left Rear Radar, Blind Spot Monitor - Right Rear Radar, and Rear View Camera (RVC). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2026 Jaguar I-Pace?

Yes. The 2026 Jaguar I-Pace uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2026 Jaguar I-Pace?

After windshield replacement on a 2026 Jaguar I-Pace, Forward Camera (Mobileye EyeQ4), Forward Radar (Continental ARS) - ACC/AEB, Rear View Camera (RVC), and ClearSight Surround View / 360° Camera System rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.

How long does a 2026 Jaguar I-Pace module service take?

Most 2026 Jaguar I-Pace onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 15 programmable modules documented in our database (3 ECU, 1 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.

Do you cover the 2026 Jaguar I-Pace on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. The 2026 Jaguar I-Pace uses JLR Secure Gateway that requires an OEM subscription for full programming - we handle that on our side, no separate sign-up needed. Quote the work and we will confirm the active service path for the 2026 Jaguar I-Pace. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2026 Jaguar I-Pace programming?

Every programming, cloning, and calibration job on the 2026 Jaguar I-Pace is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Which modules on a 2026 Jaguar I-Pace can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2026 Jaguar I-Pace. For this vehicle our database documents:

  • 3 engine control (ECU/PCM)
  • 1 transmission control (TCU/TCM)
  • 1 body control (BCM and related)
  • 1 ABS / brake control (EBCM)
  • 1 immobilizer / security
  • 1 key & fob
  • 2 instrument cluster (IPC)
  • 1 steering angle sensor (SAS)
  • 7 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2026 Jaguar I-Pace covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ADAS Module Part Numbers
T2H22227 OR SUPERSESSION
ECU / PCM Part Numbers
T4K14338, BATTERY PACK CONTROL MODULE (I-PACE 2023, VCU T4K-PREFIX (VIN SPECIFIC)
SRS / Airbag Module Part Numbers
M8E2-14D374-AD
ABS / EBCM Part Numbers
T4A7155, J9C26450 (APPROX JAGUAR I-PACE INTEGRATED POWER BRAKE - VERIFY VIA JLR SDD
Instrument Cluster (IPC) Part Numbers
LR108320, LR108321

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

(945) 382-4065 Get a Quote

Shared module fitment

Vehicles sharing modules with the 2026 Jaguar I Pace

These vehicles use one or more of the same replacement modules indexed for this vehicle.

Finish the repair

Need help finishing this repair?

Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.