Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2011 Hyundai Tucson Supported Services

2011 Hyundai Tucson

ADAS calibration, module programming, and security relearns

Trims: S, SE, SEL, Limited, Calligraphy. SmartSense standard all trims (2019+).

Technical snapshot
  • Platform LM (3rd Gen, 2010-2015)
  • CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
  • Security Hyundai ID46 transponder (Philips Crypto 2, PCF7936AS); TOY48 or HYN10 key blank; PIN extractable via GDS diagnostic tool; AKL requires GDS + PIN code + IMMO ECU registration

What do you need fixed?

Choose a service to start your quote.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2011 Hyundai Tucson. On this vehicle we cover documented systems include Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning, this LM (3rd Gen, 2010-2015) platform vehicle, SMARTRA / Smart Key immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.

Platform
LM (3rd Gen, 2010-2015)
Production
2005-present
Trim Levels
Trims: S, SE, SEL, Limited, Calligraphy. SmartSense standard all trims (2019+).
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES

VIN / Build Split

VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code.

SERVICE SNAPSHOT

Exact-year service summary for 2011 Hyundai Tucson

Electronic systems coverage

This 2011 Hyundai Tucson page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.

View systems

Programmable modules

This page indexes 28 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

This page includes 3 gateway, immobilizer, or key-security records for this 2011 Hyundai Tucson.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2011 Hyundai Tucson using the documented module data on this page.

Choose a section
EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Platform: LM (3rd Gen, 2010-2015) - Confirmed

Driver-assist suite

No standard ADAS suite - pre-SmartSense generation. Optional Forward Collision Alert, Lane Keeping Assist, Blind Spot Detection on upper trims.

VIN and build split

VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code.

Infotainment context

Hyundai Blue Link / Display Audio (5" or 7" touchscreen); Bluetooth; USB/Aux

Network and access

CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Hyundai GDS Mobile / Hyundai KDS

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2011 Hyundai Tucson. Counts reflect modules our techs have programmed or calibrated on this exact platform.

Need something not listed? Most undocumented modules can still be programmed.

Feature availability 1

Platform: LM (3rd Gen, 2010-2015)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Hyundai Tucson issues we resolve on this platform: Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - LM (3rd Gen, 2010-2015) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

No standard ADAS suite - pre-SmartSense generation. Optional Forward Collision Alert, Lane Keeping Assist, Blind Spot Detection on upper trims.

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Rear View CameraRear CameraCameraNone YES-
Blind Spot MonitoringRadarADASNone Conditional-
Forward Collision WarningCameraADASStatic Conditional-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

ECM Replacement

GDS Mobile IMMO registration + throttle position learn.

ABS/HECU Replacement

GDS Mobile bleed + WSS relearn.

SRS Modules

SRS Control Module (SRSCM) 14 records
84530-2S500 Under center console
Part number
84530-2S500
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
84530-2S600 Under center console
Part number
84530-2S600
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
84530-2S700 Under center console
Part number
84530-2S700
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
11254-06161 Under center console
Part number
11254-06161
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
11253-06203 Under center console
Part number
11253-06203
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
11254-06201 Under center console
Part number
11254-06201
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
85010-2S500 Under center console
Part number
85010-2S500
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
85020-2S500 Under center console
Part number
85020-2S500
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
56900-2S500-9P Under center console
Part number
56900-2S500-9P
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
56900-2S500-MBS Under center console
Part number
56900-2S500-MBS
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
56900-2S510-9P Under center console
Part number
56900-2S510-9P
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
56900-2S510-MBS Under center console
Part number
56900-2S510-MBS
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
13395-06001 Under center console
Part number
13395-06001
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
13396-06001 Under center console
Part number
13396-06001
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.

ECU Modules

ECM - 2.0L Nu MPI I4 / 2.7L Delta V6 (pre-2010) / 2.4L Theta II I4 (2010+)
Notes
Hyundai Tucson ECM. GDS Mobile IMMO registration.

BCM Modules

BCM (Body Control Module)
Notes
Hyundai/Kia BCM. GDS Mobile coding after replacement.

TCU / TCM Transmission Modules

TCU - A6LF2 6-Speed Auto 95440-2S0
Part number
95440-2S0
Protocol / method
J2534
Coding required
Yes
Cloning supported
Yes
Chip / MCU
Renesas SH7058
Notes
VIN coding required, adaptive learning 15-20 cycles, ATF SP-IV fluid, scan tool relearn procedure mandatory
TCU - A6MF1 6-Speed Auto 95440-2S1
Part number
95440-2S1
Protocol / method
J2534
Coding required
Yes
Cloning supported
Yes
Chip / MCU
Renesas SH7058
Notes
VIN coding required, transmission learn procedure via GDS, ATF SP-IV fluid, throttle position adaptation needed

ABS / Brake Modules

ABS/ESC Module (HECU)
Notes
Hyundai/Kia HECU. GDS Mobile bleed procedure + sensor relearn.
Wheel Speed Sensor - Front (each)
Notes
Active. C1200/C1201 series DTC.
Wheel Speed Sensor - Rear (each)
Notes
Active sensor.

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) 94003-2S120
Part number
94003-2S120
Cloning supported
Yes
Notes
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
cross-year extension)

Connectivity & Accessories

RCCA / Rear BSD
Notes
BSD replacement covers RCCA. Verify in reverse.
Backup Camera
Notes
Standard. GDS registration if replaced.
HTRAC AWD Control (if equipped)
Notes
GDS AWD variant coding. DTC clear verify.
ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
N3 Unibody - Advanced High-Strength Steel (AHSS)
OBD Protocol
ISO 15765-4 CAN (500 kbps)
CAN Architecture
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Infotainment
Hyundai Blue Link / Display Audio (5" or 7" touchscreen); Bluetooth; USB/Aux
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed
Reviewed coverage: 2011 - 1.7L CRDi 16v (D4FD), 2.0L 16v 2WD (G4HD), 2.0L 16v 2WD Automatic, 2.0L 16v CRDi E-VGT 2WD, 2.0L 16v VVT 2WD (G4HD), 2.0L CRDi (D4EA), 2.0L CRDi 4x4 (D4HA), 2.0L e-VGT.
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2011 Hyundai Tucson?

ADAS calibration pricing for a 2011 Hyundai Tucson depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2011 Hyundai Tucson?

Yes. The 2011 Hyundai Tucson uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 84530-2S500. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2011 Hyundai Tucson?

After windshield replacement on a 2011 Hyundai Tucson, Rear View Camera and Forward Collision Warning rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.

How long does a 2011 Hyundai Tucson module service take?

Most 2011 Hyundai Tucson onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 15 programmable modules documented in our database (1 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.

Do you cover the 2011 Hyundai Tucson on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2011 Hyundai Tucson. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2011 Hyundai Tucson programming?

Every programming, cloning, and calibration job on the 2011 Hyundai Tucson is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Which modules on a 2011 Hyundai Tucson can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2011 Hyundai Tucson. For this vehicle our database documents:

  • 1 engine control (ECU/PCM)
  • 2 transmission control (TCU/TCM)
  • 1 body control (BCM and related)
  • 3 ABS / brake control (EBCM)
  • 1 immobilizer / security
  • 2 key & fob
  • 1 instrument cluster (IPC)
  • 2 steering angle sensor (SAS)
  • 3 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2011 Hyundai Tucson covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ECU / PCM Part Numbers
39110-2G370
BCM / Body Module Part Numbers
95400-2S110
TCU / TCM Part Numbers
95440-2S0, 95440-2S1
SRS / Airbag Module Part Numbers
84530-2S500, 84530-2S600, 84530-2S700, 11254-06161, 11253-06203, 11254-06201, 85010-2S500, 85020-2S500, 56900-2S500-9P, 56900-2S500-MBS, 56900-2S510-9P, 56900-2S510-MBS, 13395-06001, 13396-06001
ABS / EBCM Part Numbers
58920-2S310
Instrument Cluster (IPC) Part Numbers
94003-2S120
Transmission Control Module (TCM) Part Numbers
95440-2S0, 95440-2S1

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

(945) 382-4065

Shared module fitment

Vehicles sharing modules with the 2011 Hyundai Tucson

These vehicles use one or more of the same replacement modules indexed for this vehicle.

Finish the repair

Need help finishing this repair?

Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.