Honda Sensing standard ALL trims: Collision Mitigation Braking System/Automatic
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
5th Gen RL6 - 2018-2026 generation coverage
2018-2026 Honda Odyssey service guide ADAS Calibration & Module Programming
Choose this page if your Honda Odyssey is any model year in the 2018-2026 generation.
Full ADAS calibration, module programming, and key security work for every Honda Odyssey built on this platform. Mobile service is available in the Dallas/Fort Worth service area; mail-in is temporarily unavailable.
Technical snapshot
- Platform Honda RL6 / RC1-RC2 (5th Gen Odyssey)
- CAN Architecture Honda F-CAN (powertrain, 500 kbps) + B-CAN (body, 125 kbps); OBD2 DLC Pin 6/14 HS-CAN
- Security Honda Smart Entry - EEPROM-based immobilizer; no OBD pin extraction; AKL requires Honda iN dealer authorization
The ADAS, module, and security rows below are consolidated across the full 2018-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2018-2026”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2018 Honda Odyssey. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Adaptive Cruise Control (ACC), this Honda RL6 / RC1-RC2 (5th Gen Odyssey) platform vehicle, Honda Smart Entry Gen 3 (EEPROM-based, 5th Gen Odyssey) immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
Honda RL6 / RC1-RC2 (5th Gen Odyssey)
Production
2005-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD
Engine
-
CAN Speed
Honda F-CAN (powertrain, 500 kbps) + B-CAN (body, 125 kbps); OBD2 DLC Pin 6/14 HS-CAN
Feature availability 4
Immobilizer: Honda Smart Entry Gen 3 (EEPROM-based, 5th Gen Odyssey)
StandardKey programming requires manufacturer-level tool access.
Platform: Honda RL6 / RC1-RC2 (5th Gen Odyssey)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Cylinder Deactivation Delete
AvailableApplicable to 3.5L V6. Also called VCM Delete.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Honda HDS / i-HDS / Honda Diagnostic Software
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Will my scanner do this?
Basic OBD2 scanner
Can
- Read codes on SRS systems (7 documented rows)
- Read codes on ECU systems (7 documented rows)
- Read codes on BCM systems (16 documented rows)
- Read codes on TCU / TCM systems (5 documented rows)
- Read codes on ABS systems (5 documented rows)
- Read codes on IPC / SAS systems (8 documented rows)
- Read codes on Keys systems (5 documented rows)
- Read codes on Immobilizer systems (6 documented rows)
- Read codes on Accessory systems (15 documented rows)
OEM software subscription (J2534)
OEM subscription may be required
Can
- Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Know this platform
This platform uses Honda F-CAN (powertrain, 500 kbps) + B-CAN (body, 125 kbps); OBD2 DLC Pin 6/14 HS-CAN with ISO 15765-4 CAN (500 kbps).
- CAN
- Honda F-CAN (powertrain, 500 kbps) + B-CAN (body, 125 kbps); OBD2 DLC Pin 6/14 HS-CAN
- OBD
- ISO 15765-4 CAN (500 kbps)
Generation service summary for Honda Odyssey 5th Gen RL6 (2018-2026)
Generation coverage
This page consolidates Honda Odyssey service data for 2018-2026 across 9 model years; service information is available for 9 years.
Choose a yearADAS coverage
Merged ADAS coverage includes 19 system records, including Forward Camera (Monocular) (2018), Forward Radar (77GHz) (2018), Adaptive Cruise Control (ACC) (2018), and Lane Keep Assist / Lane Departure Warning (LKA/LDW) (2018). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 30 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 63 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 11 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, and security-access planning for the Honda Odyssey 2018-2026 span, with exact-year validation before service. Mail-in work is temporarily unavailable.
Get a quoteDo I need calibration?
Windshield Replacement 40
Honda Sensing Forward Camera
2018required
Forward camera static calibration via HDS required after any windshield service. Level surface, HDS target at ~1m from front bumper. All Honda Sensing functions rely on this camera - verify all DTCs clear. OEM or Honda-approved glass recommended for correct optical properties.
LKAS
2018required
Forward camera static calibration via HDS required after any windshield service. Level surface, HDS target at ~1m from front bumper. All Honda Sensing functions rely on this camera - verify all DTCs clear. OEM or Honda-approved glass recommended for correct optical properties.
LDWS
2018required
Forward camera static calibration via HDS required after any windshield service. Level surface, HDS target at ~1m from front bumper. All Honda Sensing functions rely on this camera - verify all DTCs clear. OEM or Honda-approved glass recommended for correct optical properties.
CMBS
2018required
Forward camera static calibration via HDS required after any windshield service. Level surface, HDS target at ~1m from front bumper. All Honda Sensing functions rely on this camera - verify all DTCs clear. OEM or Honda-approved glass recommended for correct optical properties.
RDM
2018required
Forward camera static calibration via HDS required after any windshield service. Level surface, HDS target at ~1m from front bumper. All Honda Sensing functions rely on this camera - verify all DTCs clear. OEM or Honda-approved glass recommended for correct optical properties.
AHB
2018required
Forward camera static calibration via HDS required after any windshield service. Level surface, HDS target at ~1m from front bumper. All Honda Sensing functions rely on this camera - verify all DTCs clear. OEM or Honda-approved glass recommended for correct optical properties.
ACC (camera-processed functions)
2018required
Forward camera static calibration via HDS required after any windshield service. Level surface, HDS target at ~1m from front bumper. All Honda Sensing functions rely on this camera - verify all DTCs clear. OEM or Honda-approved glass recommended for correct optical properties.
Honda Sensing Camera
2019required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper. Verify all Honda Sensing DTCs clear.
LKAS
2019required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper. Verify all Honda Sensing DTCs clear.
CMBS
2019required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper. Verify all Honda Sensing DTCs clear.
RDM
2019required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper. Verify all Honda Sensing DTCs clear.
AHB
2019required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper. Verify all Honda Sensing DTCs clear.
ACC
2019required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper. Verify all Honda Sensing DTCs clear.
Honda Sensing Camera
2020required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper.
LKAS
2020required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper.
CMBS
2020required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper.
RDM
2020required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper.
AHB
2020required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper.
ACC
2020required
HDS static camera calibration required. Level surface + HDS target ~1m from bumper.
Honda Sensing Camera
2021required
HDS static camera calibration required. TJA now also reliant on camera - verify TJA DTC clear in addition to standard Honda Sensing checks.
LKAS
2021required
HDS static camera calibration required. TJA now also reliant on camera - verify TJA DTC clear in addition to standard Honda Sensing checks.
CMBS
2021required
HDS static camera calibration required. TJA now also reliant on camera - verify TJA DTC clear in addition to standard Honda Sensing checks.
TJA
2021required
HDS static camera calibration required. TJA now also reliant on camera - verify TJA DTC clear in addition to standard Honda Sensing checks.
RDM
2021required
HDS static camera calibration required. TJA now also reliant on camera - verify TJA DTC clear in addition to standard Honda Sensing checks.
AHB
2021required
HDS static camera calibration required. TJA now also reliant on camera - verify TJA DTC clear in addition to standard Honda Sensing checks.
ACC
2021required
HDS static camera calibration required. TJA now also reliant on camera - verify TJA DTC clear in addition to standard Honda Sensing checks.
Honda Sensing Camera
2022required
HDS static camera calibration. Level surface + HDS target. Verify all Honda Sensing + TJA DTCs clear.
LKAS
2022required
HDS static camera calibration. Level surface + HDS target. Verify all Honda Sensing + TJA DTCs clear.
CMBS
2022required
HDS static camera calibration. Level surface + HDS target. Verify all Honda Sensing + TJA DTCs clear.
TJA
2022required
HDS static camera calibration. Level surface + HDS target. Verify all Honda Sensing + TJA DTCs clear.
RDM
2022required
HDS static camera calibration. Level surface + HDS target. Verify all Honda Sensing + TJA DTCs clear.
AHB
2022required
HDS static camera calibration. Level surface + HDS target. Verify all Honda Sensing + TJA DTCs clear.
ACC
2022required
HDS static camera calibration. Level surface + HDS target. Verify all Honda Sensing + TJA DTCs clear.
Honda Sensing Camera
2023-2026required
HDS static camera calibration. Level surface + target. Verify all Honda Sensing + TJA DTCs clear.
LKAS
2023-2026required
HDS static camera calibration. Level surface + target. Verify all Honda Sensing + TJA DTCs clear.
CMBS
2023-2026required
HDS static camera calibration. Level surface + target. Verify all Honda Sensing + TJA DTCs clear.
TJA
2023-2026required
HDS static camera calibration. Level surface + target. Verify all Honda Sensing + TJA DTCs clear.
RDM
2023-2026required
HDS static camera calibration. Level surface + target. Verify all Honda Sensing + TJA DTCs clear.
AHB
2023-2026required
HDS static camera calibration. Level surface + target. Verify all Honda Sensing + TJA DTCs clear.
ACC
2023-2026required
HDS static camera calibration. Level surface + target. Verify all Honda Sensing + TJA DTCs clear.
Front Bumper Repair or Replacement 3
Honda Sensing Forward Radar (77GHz)
2018required
Radar boresight calibration via HDS required after front bumper R&R. Reinstall bumper cover before final calibration step. Paired camera calibration recommended if full front end disassembled.
CMBS
2018required
Radar boresight calibration via HDS required after front bumper R&R. Reinstall bumper cover before final calibration step. Paired camera calibration recommended if full front end disassembled.
ACC
2018required
Radar boresight calibration via HDS required after front bumper R&R. Reinstall bumper cover before final calibration step. Paired camera calibration recommended if full front end disassembled.
Rear Bumper or Liftgate Repair 2
Backup Camera
2018recommended
Backup camera HDS ID check if camera replaced. Power liftgate height calibration via HDS if liftgate or struts replaced - verify obstruction detection.
Power Liftgate
2018recommended
Backup camera HDS ID check if camera replaced. Power liftgate height calibration via HDS if liftgate or struts replaced - verify obstruction detection.
Front or Side Collision 4
SRS ECU
2018required
Full SRS system scan mandatory. Hard deployment = SRS ECU replacement only (no crash clear via HDS). Inspect all impact sensors. Honda Sensing camera and radar must be re-calibrated if front end was disturbed. Do not deliver vehicle without SRS readiness confirmed via HDS.
all deployed airbags
2018required
Full SRS system scan mandatory. Hard deployment = SRS ECU replacement only (no crash clear via HDS). Inspect all impact sensors. Honda Sensing camera and radar must be re-calibrated if front end was disturbed. Do not deliver vehicle without SRS readiness confirmed via HDS.
seatbelt pretensioners
2018required
Full SRS system scan mandatory. Hard deployment = SRS ECU replacement only (no crash clear via HDS). Inspect all impact sensors. Honda Sensing camera and radar must be re-calibrated if front end was disturbed. Do not deliver vehicle without SRS readiness confirmed via HDS.
Honda Sensing camera and radar
2018required
Full SRS system scan mandatory. Hard deployment = SRS ECU replacement only (no crash clear via HDS). Inspect all impact sensors. Honda Sensing camera and radar must be re-calibrated if front end was disturbed. Do not deliver vehicle without SRS readiness confirmed via HDS.
Power Sliding Door Repair 2
Power Sliding Door Control Unit (L or R)
2018required
HDS sliding door programming and pinch force calibration required after door control unit replacement or door mechanism service. Verify full open/close cycle and obstacle reversal function.
pinch detection
2018required
HDS sliding door programming and pinch force calibration required after door control unit replacement or door mechanism service. Verify full open/close cycle and obstacle reversal function.
Any Module Replacement (ECM, BCM, SRS, ABS, EPS) 1
All programmed modules
2018required
HDS/i-HDS Programming Port programming and VIN registration required for all new Honda modules. IMMO re-match required if ECM or Smart Entry ECU replaced. ABS: bleed cycle + SAS calibration. EPS: torque sensor zero calibration. Verify Honda Sensing post any front module replacement.
Forward Camera Replacement 2
2018-2019
Yes
Camera module replacement requires full recalibration using HDS.
2020-2026
Yes
Camera module replacement requires full recalibration using HDS.
Forward Radar Replacement 2
2018-2019
Yes
Radar module replacement requires alignment/calibration using HDS.
2020-2026
Yes
Radar module replacement requires alignment/calibration using HDS.
Front Bumper Repair 13
Forward Radar
2019required
HDS radar boresight calibration. Bumper must be installed for final step. Verify CMBS and ACC function.
CMBS
2019required
HDS radar boresight calibration. Bumper must be installed for final step. Verify CMBS and ACC function.
ACC
2019required
HDS radar boresight calibration. Bumper must be installed for final step. Verify CMBS and ACC function.
Forward Radar
2020required
HDS radar boresight calibration with bumper installed.
CMBS
2020required
HDS radar boresight calibration with bumper installed.
ACC
2020required
HDS radar boresight calibration with bumper installed.
Forward Radar
2021required
HDS radar boresight calibration. 2021 refresh fascia - confirm bracket position before install.
CMBS
2021required
HDS radar boresight calibration. 2021 refresh fascia - confirm bracket position before install.
ACC
2021required
HDS radar boresight calibration. 2021 refresh fascia - confirm bracket position before install.
TJA
2021required
HDS radar boresight calibration. 2021 refresh fascia - confirm bracket position before install.
Forward Radar
2022-2026required
HDS radar boresight with bumper installed.
CMBS
2022-2026required
HDS radar boresight with bumper installed.
ACC
2022-2026required
HDS radar boresight with bumper installed.
Collision / Airbag Deployment 22
SRS ECU
2019required
SRS ECU replacement required after hard deployment (no HDS crash clear). Re-calibrate Honda Sensing if front disturbed. Full HDS scan before delivery.
airbags
2019required
SRS ECU replacement required after hard deployment (no HDS crash clear). Re-calibrate Honda Sensing if front disturbed. Full HDS scan before delivery.
pretensioners
2019required
SRS ECU replacement required after hard deployment (no HDS crash clear). Re-calibrate Honda Sensing if front disturbed. Full HDS scan before delivery.
Honda Sensing
2019required
SRS ECU replacement required after hard deployment (no HDS crash clear). Re-calibrate Honda Sensing if front disturbed. Full HDS scan before delivery.
SRS ECU
2020required
SRS ECU replacement required after hard deployment. Re-calibrate Honda Sensing if front disturbed.
airbags
2020required
SRS ECU replacement required after hard deployment. Re-calibrate Honda Sensing if front disturbed.
pretensioners
2020required
SRS ECU replacement required after hard deployment. Re-calibrate Honda Sensing if front disturbed.
Honda Sensing
2020required
SRS ECU replacement required after hard deployment. Re-calibrate Honda Sensing if front disturbed.
SRS ECU
2021required
2021 SRS ECU has updated suffix - verify correct replacement unit. Hard deployment = replace only. Honda Sensing re-calibration if front disturbed.
airbags
2021required
2021 SRS ECU has updated suffix - verify correct replacement unit. Hard deployment = replace only. Honda Sensing re-calibration if front disturbed.
pretensioners
2021required
2021 SRS ECU has updated suffix - verify correct replacement unit. Hard deployment = replace only. Honda Sensing re-calibration if front disturbed.
Honda Sensing
2021required
2021 SRS ECU has updated suffix - verify correct replacement unit. Hard deployment = replace only. Honda Sensing re-calibration if front disturbed.
SRS ECU
2022required
SRS ECU replacement only (no HDS crash clear). Honda Sensing re-calibration if front disturbed.
airbags
2022required
SRS ECU replacement only (no HDS crash clear). Honda Sensing re-calibration if front disturbed.
pretensioners
2022required
SRS ECU replacement only (no HDS crash clear). Honda Sensing re-calibration if front disturbed.
Honda Sensing
2022required
SRS ECU replacement only (no HDS crash clear). Honda Sensing re-calibration if front disturbed.
SRS ECU
2023required
SRS ECU replace only (no HDS crash clear). Re-calibrate Honda Sensing if front disturbed.
airbags
2023required
SRS ECU replace only (no HDS crash clear). Re-calibrate Honda Sensing if front disturbed.
Honda Sensing
2023required
SRS ECU replace only (no HDS crash clear). Re-calibrate Honda Sensing if front disturbed.
SRS ECU
2024-2026required
SRS ECU replace only. Re-calibrate Honda Sensing if front disturbed. Full HDS scan before delivery.
airbags
2024-2026required
SRS ECU replace only. Re-calibrate Honda Sensing if front disturbed. Full HDS scan before delivery.
Honda Sensing
2024-2026required
SRS ECU replace only. Re-calibrate Honda Sensing if front disturbed. Full HDS scan before delivery.
Power Sliding Door Service 8
PSDC Left/Right
2019required
HDS pinch force calibration after door control unit replacement. Verify full cycle and obstacle reversal.
pinch sensors
2019required
HDS pinch force calibration after door control unit replacement. Verify full cycle and obstacle reversal.
PSDC Left/Right
2020required
HDS pinch force calibration required. Verify full cycle and obstacle reversal.
pinch sensors
2020required
HDS pinch force calibration required. Verify full cycle and obstacle reversal.
PSDC Left/Right
2021required
HDS pinch force calibration. Verify full cycle.
pinch sensors
2021required
HDS pinch force calibration. Verify full cycle.
PSDC Left/Right
2022, 2024-2026required
HDS pinch force calibration. Verify full cycle.
PSDC Left/Right
2023required
HDS pinch force calibration.
Year-by-year details
| Year | VIN split | Infotainment | Wireless CarPlay | Wireless Android Auto | Trim notes |
|---|---|---|---|---|---|
| 2018 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |||
| 2019 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2020 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2021 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2022 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2023 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2024 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2025 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2026 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
What changes across 2018-2026
Differences versus the generation reference. Years not listed here match the shared platform data on this page.
2019
- Infotainment: Honda Display Audio
2020
- Infotainment: Honda Display Audio
2021
- Infotainment: Honda Display Audio
2022
- Infotainment: Honda Display Audio
2023
- Infotainment: Honda Display Audio
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
2024
- Infotainment: Honda Display Audio
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
2025
- Infotainment: Honda Display Audio
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
2026
- Infotainment: Honda Display Audio
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
19 ADAS systems documented across the 2018-2026 generation. Rows that apply to only part of the generation carries a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Honda Sensing standard ALL trims: Collision Mitigation Braking System/Automatic Emergency Braking, Lane Keeping Assist, Lane Departure Warning, Adaptive Cruise Control with Low-Speed Follow, Road Departure Mitigation, Auto High-Beam. Blind Spot Information (BSI) optional on upper trims.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) 2018 | Forward Camera | Camera | Static | YES | 36150-THR-A11 | |
| Forward Radar (77GHz) 2018 | Front Radar | Radar | Static | YES | 36802-THR-A01 | |
| Adaptive Cruise Control (ACC) 2018 | Front Radar | Radar | Static | YES | 36802-THR-A01 | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) 2018 | Forward Camera | Camera | Static | YES | 36150-THR-A11 | |
| Rear View Camera 2018 | Rear Camera | Camera | Static | YES | 39530-THR | |
| Forward Camera (Monocular) 2019 | Forward Camera | Camera | Static | YES | 36150-THR-A11 | |
| Forward Radar (77GHz) 2019 | Front Radar | Radar | Static | YES | 36802-THR-A01 | |
| Rear View Camera 2019-2021 | Rear Camera | Camera | Static | YES | 39530-THR | |
| Forward Camera (Monocular) 2020 | Forward Camera | Camera | Static | YES | 36150-THR-A11 | |
| Forward Radar (77GHz) 2020 | Front Radar | Radar | Static | YES | 36802-THR-A01 | |
| CabinWatch Interior Camera (Elite) 2020 | Interior Camera | Camera | None | YES | 39530-THR-C01 | |
| Honda Sensing Forward Camera (Monocular - 2021 Refresh) 2021 | Forward Camera | Camera | Static | YES | 36150-THR-A21 | |
| Honda Sensing Forward Radar (77GHz - 2021 Refresh) 2021 | Front Radar | Radar | Static | YES | 36802-THR-A21 | |
| Traffic Jam Assist (TJA - new 2021) 2021 | Fused (Camera + Radar) | Fused | Static | YES | - | |
| Forward Camera (Monocular) 2022 | Forward Camera | Camera | Static | YES | 36150-THR-A21 | |
| Forward Radar (77GHz) 2022-2026 | Front Radar | Radar | Static | YES | 36802-THR-A21 | |
| Rear View Camera 2022-2026 | Rear Camera | Camera | Static | YES | 39530-THR | |
| Forward Camera (Monocular) 2023 | Forward Camera | Camera | Static | YES | 36150-THR-A21 | |
| Forward Camera (Monocular) 2024-2026 | Forward Camera | Camera | Static | YES | 36150-THR-A21 |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement 2018 Affected: Honda Sensing Forward Camera, LKAS, LDWS, CMBS, RDM, AHB, ACC (camera-processed functions)
Forward camera static calibration via HDS required after any windshield service. Level surface, HDS target at ~1m from front bumper. All Honda Sensing functions rely on this camera - verify all DTCs clear. OEM or Honda-approved glass recommended for correct optical properties.
Front Bumper Repair or Replacement 2018 Affected: Honda Sensing Forward Radar (77GHz), CMBS, ACC
Radar boresight calibration via HDS required after front bumper R&R. Reinstall bumper cover before final calibration step. Paired camera calibration recommended if full front end disassembled.
Rear Bumper or Liftgate Repair 2018 Affected: Backup Camera, Power Liftgate
Backup camera HDS ID check if camera replaced. Power liftgate height calibration via HDS if liftgate or struts replaced - verify obstruction detection.
Front or Side Collision 2018 Affected: SRS ECU, all deployed airbags, seatbelt pretensioners, Honda Sensing camera and radar
Full SRS system scan mandatory. Hard deployment = SRS ECU replacement only (no crash clear via HDS). Inspect all impact sensors. Honda Sensing camera and radar must be re-calibrated if front end was disturbed. Do not deliver vehicle without SRS readiness confirmed via HDS.
Power Sliding Door Repair 2018 Affected: Power Sliding Door Control Unit (L or R), pinch detection
HDS sliding door programming and pinch force calibration required after door control unit replacement or door mechanism service. Verify full open/close cycle and obstacle reversal function.
Any Module Replacement (ECM, BCM, SRS, ABS, EPS) 2018 Affected: All programmed modules
HDS/i-HDS Programming Port programming and VIN registration required for all new Honda modules. IMMO re-match required if ECM or Smart Entry ECU replaced. ABS: bleed cycle + SAS calibration. EPS: torque sensor zero calibration. Verify Honda Sensing post any front module replacement.
Forward Camera Replacement 2018-2019
Camera module replacement requires full recalibration using HDS.
Forward Radar Replacement 2018-2019
Radar module replacement requires alignment/calibration using HDS.
Windshield Replacement 2019 Affected: Honda Sensing Camera, LKAS, CMBS, RDM, AHB, ACC
HDS static camera calibration required. Level surface + HDS target ~1m from bumper. Verify all Honda Sensing DTCs clear.
Front Bumper Repair 2019 Affected: Forward Radar, CMBS, ACC
HDS radar boresight calibration. Bumper must be installed for final step. Verify CMBS and ACC function.
Collision / Airbag Deployment 2019 Affected: SRS ECU, airbags, pretensioners, Honda Sensing
SRS ECU replacement required after hard deployment (no HDS crash clear). Re-calibrate Honda Sensing if front disturbed. Full HDS scan before delivery.
Power Sliding Door Service 2019 Affected: PSDC Left/Right, pinch sensors
HDS pinch force calibration after door control unit replacement. Verify full cycle and obstacle reversal.
Windshield Replacement 2020 Affected: Honda Sensing Camera, LKAS, CMBS, RDM, AHB, ACC
HDS static camera calibration required. Level surface + HDS target ~1m from bumper.
Front Bumper Repair 2020 Affected: Forward Radar, CMBS, ACC
HDS radar boresight calibration with bumper installed.
Collision / Airbag Deployment 2020 Affected: SRS ECU, airbags, pretensioners, Honda Sensing
SRS ECU replacement required after hard deployment. Re-calibrate Honda Sensing if front disturbed.
Power Sliding Door Service 2020 Affected: PSDC Left/Right, pinch sensors
HDS pinch force calibration required. Verify full cycle and obstacle reversal.
Forward Camera Replacement 2020-2026
Camera module replacement requires full recalibration using HDS.
Forward Radar Replacement 2020-2026
Radar module replacement requires alignment/calibration using HDS.
Windshield Replacement 2021 Affected: Honda Sensing Camera, LKAS, CMBS, TJA, RDM, AHB, ACC
HDS static camera calibration required. TJA now also reliant on camera - verify TJA DTC clear in addition to standard Honda Sensing checks.
Front Bumper Repair 2021 Affected: Forward Radar, CMBS, ACC, TJA
HDS radar boresight calibration. 2021 refresh fascia - confirm bracket position before install.
Collision / Airbag Deployment 2021 Affected: SRS ECU, airbags, pretensioners, Honda Sensing
2021 SRS ECU has updated suffix - verify correct replacement unit. Hard deployment = replace only. Honda Sensing re-calibration if front disturbed.
Power Sliding Door Service 2021 Affected: PSDC Left/Right, pinch sensors
HDS pinch force calibration. Verify full cycle.
Windshield Replacement 2022 Affected: Honda Sensing Camera, LKAS, CMBS, TJA, RDM, AHB, ACC
HDS static camera calibration. Level surface + HDS target. Verify all Honda Sensing + TJA DTCs clear.
Front Bumper Repair 2022-2026 Affected: Forward Radar, CMBS, ACC
HDS radar boresight with bumper installed.
Collision / Airbag Deployment 2022 Affected: SRS ECU, airbags, pretensioners, Honda Sensing
SRS ECU replacement only (no HDS crash clear). Honda Sensing re-calibration if front disturbed.
Power Sliding Door Service 2022, 2024-2026 Affected: PSDC Left/Right
HDS pinch force calibration. Verify full cycle.
Windshield Replacement 2023-2026 Affected: Honda Sensing Camera, LKAS, CMBS, TJA, RDM, AHB, ACC
HDS static camera calibration. Level surface + target. Verify all Honda Sensing + TJA DTCs clear.
Collision / Airbag Deployment 2023 Affected: SRS ECU, airbags, Honda Sensing
SRS ECU replace only (no HDS crash clear). Re-calibrate Honda Sensing if front disturbed.
Power Sliding Door Service 2023 Affected: PSDC Left/Right
HDS pinch force calibration.
Collision / Airbag Deployment 2024-2026 Affected: SRS ECU, airbags, Honda Sensing
SRS ECU replace only. Re-calibrate Honda Sensing if front disturbed. Full HDS scan before delivery.
Modules we program on this generation
63 documented Honda Odyssey modules across the 2018-2026 generation. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
SRS Control Unit x7
77960-THR-A020-M2 Verify by VIN 2018-2023 Under center console
_years covers only 2018-2023 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023
Always match the full part number before buying a used module.
Access
Located: Cabin, center of vehicle under the center console / floor console, behind and to the left of the lower console storage pocket
Reached from inside the cabin under the floor console. The lower center console trim and storage pocket are removed to expose the SRS unit mounted to the floor tunnel. Restraint-system work should be left to a professional; this is a safety-critical module and improper handling risks accidental deployment.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- PART
- 77960-THR-A020-M2
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-THR-A120-M2 Verify by VIN 2018-2023 Under center console
_years covers only 2018-2023 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023
Always match the full part number before buying a used module.
Access
Located: Cabin, center of vehicle under the center console / floor console, behind and to the left of the lower console storage pocket
Reached from inside the cabin under the floor console. The lower center console trim and storage pocket are removed to expose the SRS unit mounted to the floor tunnel. Restraint-system work should be left to a professional; this is a safety-critical module and improper handling risks accidental deployment.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- PART
- 77960-THR-A120-M2
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-TG7-A210-M2 Verify by VIN 2022 Under center console
_years covers only 2022 for this generation
Used/donor module guide
Compatible donor years: 2022
Always match the full part number before buying a used module.
Access
Located: Cabin, center of vehicle under the center console / floor console, behind and to the left of the lower console storage pocket
Reached from inside the cabin under the floor console. The lower center console trim and storage pocket are removed to expose the SRS unit mounted to the floor tunnel. Restraint-system work should be left to a professional; this is a safety-critical module and improper handling risks accidental deployment.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- PART
- 77960-TG7-A210-M2
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-30B-A751-M4 Verify by VIN 2023 Under center console
_years covers only 2023 for this generation
Used/donor module guide
Compatible donor years: 2023
Always match the full part number before buying a used module.
Access
Located: Cabin, center of vehicle under the center console / floor console, behind and to the left of the lower console storage pocket
Reached from inside the cabin under the floor console. The lower center console trim and storage pocket are removed to expose the SRS unit mounted to the floor tunnel. Restraint-system work should be left to a professional; this is a safety-critical module and improper handling risks accidental deployment.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- PART
- 77960-30B-A751-M4
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
7796030BA751M4 Verify by VIN 2024-2026 Under center console
_years covers only 2024-2026 for this generation
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
Access
Located: Cabin, center of vehicle under the center console / floor console, behind and to the left of the lower console storage pocket
Reached from inside the cabin under the floor console. The lower center console trim and storage pocket are removed to expose the SRS unit mounted to the floor tunnel. Restraint-system work should be left to a professional; this is a safety-critical module and improper handling risks accidental deployment.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- PART
- 7796030BA751M4
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960THRA120M2 Verify by VIN 2024-2026 Under center console
_years covers only 2024-2026 for this generation
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
Access
Located: Cabin, center of vehicle under the center console / floor console, behind and to the left of the lower console storage pocket
Reached from inside the cabin under the floor console. The lower center console trim and storage pocket are removed to expose the SRS unit mounted to the floor tunnel. Restraint-system work should be left to a professional; this is a safety-critical module and improper handling risks accidental deployment.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- PART
- 77960THRA120M2
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960THRA020M2 Verify by VIN 2024-2026 Under center console
_years covers only 2024-2026 for this generation
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
Access
Located: Cabin, center of vehicle under the center console / floor console, behind and to the left of the lower console storage pocket
Reached from inside the cabin under the floor console. The lower center console trim and storage pocket are removed to expose the SRS unit mounted to the floor tunnel. Restraint-system work should be left to a professional; this is a safety-critical module and improper handling risks accidental deployment.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- PART
- 77960THRA020M2
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
ECU MODULES
ECU Modules
ECM - 3.5L J35Y6 V6 i-VTEC x4
37820-RLV-A01 Verify by VIN 2018-2020 OBD Programming Port
_years covers only 2018-2020 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019, 2020
Donor must match part family 37820-RLV-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, passenger side, mounted near the under-hood fuse/relay box at the rear of the engine compartment
Reached from under the hood on the passenger side. The intake air duct / air cleaner area and adjacent harness covers are moved aside to expose the PCM and its connectors. Replacement units require VIN/immobilizer programming and are not plug-and-play.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 37820-RLV-A01
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Denso SH72544R
- NOTES
- HDS/i-HDS Programming Port flash programming required. VIN registration + IMMO seed write after replacement. Injector balance correction data (QR/datamatrix on each injector) entry via HDS. Throttle position initialization and idle learn via HDS. Variable Cylinder Management (VCM) active - verify cylinder deactivation post-programming.
37820-RLV-A01 Verify by VIN 2021 OBD Programming Port
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Donor must match part family 37820-RLV-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, passenger side, mounted near the under-hood fuse/relay box at the rear of the engine compartment
Reached from under the hood on the passenger side. The intake air duct / air cleaner area and adjacent harness covers are moved aside to expose the PCM and its connectors. Replacement units require VIN/immobilizer programming and are not plug-and-play.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 37820-RLV-A01
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Denso SH72544R
- NOTES
- HDS/i-HDS Programming Port flash + VIN + IMMO seed write. Injector balance entry + throttle init + idle learn. Verify VCM cylinder deactivation.
37820-RLV-A01 Verify by VIN 2022 OBD Programming Port
_years covers only 2022 for this generation
Used/donor module guide
Compatible donor years: 2022
Donor must match part family 37820-RLV-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, passenger side, mounted near the under-hood fuse/relay box at the rear of the engine compartment
Reached from under the hood on the passenger side. The intake air duct / air cleaner area and adjacent harness covers are moved aside to expose the PCM and its connectors. Replacement units require VIN/immobilizer programming and are not plug-and-play.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 37820-RLV-A01
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Denso SH72544R
- NOTES
- HDS/i-HDS Programming Port flash + VIN + IMMO seed. Injector balance data + throttle init + idle learn. Verify VCM.
37820-RLV-A01 Verify by VIN 2023-2026 OBD Programming Port
_years covers only 2023-2026 for this generation
Used/donor module guide
Compatible donor years: 2023, 2024, 2025, 2026
Donor must match part family 37820-RLV-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, passenger side, mounted near the under-hood fuse/relay box at the rear of the engine compartment
Reached from under the hood on the passenger side. The intake air duct / air cleaner area and adjacent harness covers are moved aside to expose the PCM and its connectors. Replacement units require VIN/immobilizer programming and are not plug-and-play.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 37820-RLV-A01
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Denso SH72544R
- NOTES
- HDS/i-HDS Programming Port flash + VIN + IMMO seed. Injector balance + throttle init + idle learn. Verify VCM.
TCM - 10-Speed Automatic x2
28100-5MX-A01 Verify by VIN 2018-2020 OBD Programming Port
_years covers only 2018-2020 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019, 2020
Donor must match part family 28100-5MX-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, passenger side, mounted near the under-hood fuse/relay box at the rear of the engine compartment
Reached from under the hood on the passenger side. The intake air duct / air cleaner area and adjacent harness covers are moved aside to expose the PCM and its connectors. Replacement units require VIN/immobilizer programming and are not plug-and-play.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 28100-5MX-A01
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Denso
- NOTES
- HDS TCM programming after replacement. Adaptive shift relearn required: 50-100 miles mixed-cycle driving. Honda ATF DW-1 fluid. Verify all shift points and torque converter lockup post-replacement.
28100-5MX-A01 Verify by VIN 2021-2026 OBD Programming Port
_years covers only 2021-2026 for this generation
Used/donor module guide
Compatible donor years: 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family 28100-5MX-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, passenger side, mounted near the under-hood fuse/relay box at the rear of the engine compartment
Reached from under the hood on the passenger side. The intake air duct / air cleaner area and adjacent harness covers are moved aside to expose the PCM and its connectors. Replacement units require VIN/immobilizer programming and are not plug-and-play.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 28100-5MX-A01
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Denso
- NOTES
- HDS TCM flash + adaptive relearn. Honda DW-1 ATF.
EPS Control Unit (Electric Power Steering) Verify by VIN 2018-2020 x1
_years covers only 2018-2020 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019, 2020
Donor must match part family 39980-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, passenger side, mounted near the under-hood fuse/relay box at the rear of the engine compartment
Reached from under the hood on the passenger side. The intake air duct / air cleaner area and adjacent harness covers are moved aside to expose the PCM and its connectors. Replacement units require VIN/immobilizer programming and are not plug-and-play.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 39980-THR-A01
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas
- NOTES
- HDS EPS initialization + torque sensor zero calibration after replacement. Level surface, steering in center position. Verify no EPS DTC.
BCM MODULES
BCM Modules
Body Control Module (BCM) x4
38809-THR-A01 Verify by VIN 2018
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Donor must match part family 38809-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 38809-THR-A01
- SECURITY
- EEPROM
- CODING
- Yes
- CLONE
- Yes
- NOTES
- HDS BCM programming and VIN registration required after replacement. Controls power locks, lighting, power sliding doors, liftgate, alarm. Verify all body functions post-replacement including Magic Slide door controls.
38809-THR-A01 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family 38809-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 38809-THR-A01
- SECURITY
- EEPROM
- CODING
- Yes
- CLONE
- Yes
- NOTES
- HDS BCM programming + VIN registration. Controls power sliding doors, liftgate, lighting, locks.
38809-THR-A01 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family 38809-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 38809-THR-A01
- SECURITY
- EEPROM
- CODING
- Yes
- CLONE
- Yes
- NOTES
- HDS BCM programming + VIN registration. Controls sliding doors, liftgate, lighting, locks, CabinWatch interface.
38809-THR-B01 Verify by VIN 2022-2026
_years covers only 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Donor must match part family 38809-THR-B01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 38809-THR-B01
- SECURITY
- EEPROM
- CODING
- Yes
- CLONE
- Yes
- NOTES
- HDS BCM programming + VIN registration. Controls sliding doors, liftgate, lighting, locks.
Keyless Access Control Unit (Smart Entry ECU) Verify by VIN 2018 x1
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Donor must match part family 35100-THR-A01; VIN-locked
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 35100-THR-A01
- SECURITY
- EEPROM
- CODING
- Yes
- CLONE
- No
- NOTES
- EEPROM-based immobilizer - no OBD pin extraction. Replacement requires Honda iN dealer authorization + HDS key registration. All previously registered keys erased on replacement. Max 6 keys per vehicle. All customer keys must be present for re-registration via HDS.
Power Sliding Door Control Unit - Left x3
72010-THR-A01 Verify by VIN 2018
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Donor must match part family 72010-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 72010-THR-A01
- SECURITY
- can
- CODING
- Yes
- CLONE
- Yes
- NOTES
- HDS programming after replacement. Sliding door pinch force calibration via HDS required. Verify full open/close cycle and obstacle detection post-programming.
72010-THR-A01 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family 72010-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 72010-THR-A01
- SECURITY
- can
- CODING
- Yes
- CLONE
- Yes
- NOTES
- HDS programming + pinch force calibration. Verify full travel and auto-reverse.
72010-THR-A01 Verify by VIN 2020-2026
_years covers only 2020-2026 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family 72010-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 72010-THR-A01
- SECURITY
- can
- CODING
- Yes
- CLONE
- Yes
- NOTES
- HDS programming + pinch force calibration.
Power Sliding Door Control Unit - Right x3
72510-THR-A01 Verify by VIN 2018
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Donor must match part family 72510-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 72510-THR-A01
- SECURITY
- can
- CODING
- Yes
- CLONE
- Yes
- NOTES
- Same procedure as left unit. HDS programming + pinch force calibration. Verify full travel and auto-reverse function.
72510-THR-A01 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family 72510-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 72510-THR-A01
- SECURITY
- can
- CODING
- Yes
- CLONE
- Yes
- NOTES
- HDS programming + pinch force calibration. Same as left unit.
72510-THR-A01 Verify by VIN 2020-2026
_years covers only 2020-2026 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family 72510-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 72510-THR-A01
- SECURITY
- can
- CODING
- Yes
- CLONE
- Yes
- NOTES
- HDS programming + pinch force calibration.
Keyless Access Control Unit x4
35100-THR-A01 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 35100-THR-A01
- SECURITY
- EEPROM
- CODING
- Yes
- CLONE
- No
- NOTES
- EEPROM-based. Requires Honda iN authorization + HDS. All keys erased on replacement. Max 6 keys.
35100-THR-A01 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 35100-THR-A01
- SECURITY
- EEPROM
- CODING
- Yes
- CLONE
- No
- NOTES
- Honda iN authorization required. All keys erased on replacement. Max 6 keys.
35100-THR-A01 Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 35100-THR-A01
- SECURITY
- EEPROM
- CODING
- Yes
- CLONE
- No
- NOTES
- Honda iN auth required. All keys erased on replacement. Max 6 keys.
35100-THR-A01 Verify by VIN 2022-2026
_years covers only 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 35100-THR-A01
- SECURITY
- EEPROM
- CODING
- Yes
- CLONE
- No
- NOTES
- Honda iN auth required. Max 6 keys.
Body Control Module (BCM - 2021 Refresh) Verify by VIN 2021 x1
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Donor must match part family 38809-THR-B01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, driver footwell area, mounted high under the dash below/behind the steering column
Reached from inside the cabin under the driver-side dash. The driver lower dash trim / knee bolster is removed to expose the module, which sits fairly hidden up behind the dash. Replacement units must be programmed to the vehicle.
Verify before relying on this - secondary sources only.
- PART
- 38809-THR-B01
- SECURITY
- EEPROM
- CODING
- Yes
- CLONE
- Yes
- NOTES
- Updated suffix for 2021 refresh. HDS BCM programming + VIN registration. Controls sliding doors, liftgate, lighting. Verify 2021+ suffix before ordering.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 9AT 9-Speed Automatic Verify by VIN 2018-2019 28100-5K6
_years covers only 2018-2019 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
- PART
- 28100-5K6
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7269
- NOTES
- Requires HDS or J2534 tool for programming. ATF-DW1 fluid spec. Transmission relearn via drive cycle after programming. VIN coding mandatory.
TCU - 10AT 10-Speed Auto Verify by VIN 2020-2021 28100-5KE
_years covers only 2020-2021 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021
Donor must match part family 28100-5KE - requires cloning
Always match the full part number before buying a used module.
- PART
- 28100-5KE
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7267
- NOTES
- Requires HDS or J2534 tool for initial programming. ATF-DW1 fluid spec. TCU adaptation and shift point learning required after installation.
TCU - 10AT 10-Speed Automatic Verify by VIN 2022-2023 28100-5L2
_years covers only 2022-2023 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023
Always match the full part number before buying a used module.
- PART
- 28100-5L2
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas RH850
- NOTES
- Requires Honda HDS or J2534 tool, TCU adaptation, ATF DW-1 fluid, idle relearn after programming
TCU - 10AT 10-Speed Auto Verify by VIN 2024-2025 28100-5L6
_years covers only 2024-2025 for this generation
Used/donor module guide
Compatible donor years: 2024, 2025
Always match the full part number before buying a used module.
- PART
- 28100-5L6
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH72533
- NOTES
- Requires HDS or J2534 tool, VIN coding mandatory, ATF DW-1 spec, idle relearn procedure required after programming
TCU - 10AT 10-Speed Automatic Verify by VIN 2026 28100-5J6
_years covers only 2026 for this generation
Used/donor module guide
Compatible donor years: 2026
Donor must match part family 28100-5J6 - requires cloning
Always match the full part number before buying a used module.
- PART
- 28100-5J6
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas RH850
- NOTES
- Requires Honda HDS or compatible J2534 tool for programming. ATF-DW1 fluid specification. TCU relearn via idle procedure after installation.
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/VSA Modulator-Control Unit Verify by VIN 2018 57110-THR-A01
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Donor must match part family 57110-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, mounted to the body on a bracket in the engine compartment
Accessed from under the hood. The air cleaner/intake assembly is removed first to reach the VSA modulator-control unit, which is mounted on a bracket with brake lines and an electrical connector attached. Disconnect battery before servicing.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 57110-THR-A01
- CLONE
- Yes
- NOTES
- Bosch VSA (Vehicle Stability Assist) modulator. HDS ABS/VSA initialization after replacement. Power bleed via HDS automated solenoid sequence (preferred over manual). Steering angle sensor zero-point calibration required: HDS SAS reset, then drive straight 35+ mph on level road. Verify firm brake pedal before road test.
ABS/VSA Modulator-Control Unit Verify by VIN 2019 57110-THR-A01
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family 57110-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, mounted to the body on a bracket in the engine compartment
Accessed from under the hood. The air cleaner/intake assembly is removed first to reach the VSA modulator-control unit, which is mounted on a bracket with brake lines and an electrical connector attached. Disconnect battery before servicing.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 57110-THR-A01
- CLONE
- Yes
- NOTES
- Bosch VSA. HDS power bleed after replacement. SAS zero-point calibration via HDS. Drive straight 35+ mph to complete SAS calibration.
ABS/VSA Modulator-Control Unit Verify by VIN 2020-2021, 2024-2026 57110-THR-A01
_years covers only 2020-2021, 2024-2026 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021, 2024, 2025, 2026
Donor must match part family 57110-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, mounted to the body on a bracket in the engine compartment
Accessed from under the hood. The air cleaner/intake assembly is removed first to reach the VSA modulator-control unit, which is mounted on a bracket with brake lines and an electrical connector attached. Disconnect battery before servicing.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 57110-THR-A01
- CLONE
- Yes
- NOTES
- Bosch VSA. HDS power bleed + SAS zero-point calibration. Drive 35+ mph straight after reset.
ABS/VSA Modulator-Control Unit Verify by VIN 2022 57110-THR-A01
_years covers only 2022 for this generation
Used/donor module guide
Compatible donor years: 2022
Donor must match part family 57110-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, mounted to the body on a bracket in the engine compartment
Accessed from under the hood. The air cleaner/intake assembly is removed first to reach the VSA modulator-control unit, which is mounted on a bracket with brake lines and an electrical connector attached. Disconnect battery before servicing.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 57110-THR-A01
- CLONE
- Yes
- NOTES
- Bosch VSA. HDS power bleed + SAS calibration. Drive 35+ mph straight after reset.
ABS/VSA Modulator-Control Unit Verify by VIN 2023 57110-THR-A01
_years covers only 2023 for this generation
Used/donor module guide
Compatible donor years: 2023
Donor must match part family 57110-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Engine bay, mounted to the body on a bracket in the engine compartment
Accessed from under the hood. The air cleaner/intake assembly is removed first to reach the VSA modulator-control unit, which is mounted on a bracket with brake lines and an electrical connector attached. Disconnect battery before servicing.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- PART
- 57110-THR-A01
- CLONE
- Yes
- NOTES
- Bosch VSA. HDS power bleed + SAS zero-point calibration. Drive 35+ mph after reset.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) x5
78100-THR-A01 Verify by VIN 2018, 2026
_years covers only 2018, 2026 for this generation
Used/donor module guide
Compatible donor years: 2018, 2026
Donor must match part family 78100-THR-A01 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, in the dashboard directly behind the steering wheel
Reached from inside the cabin. The instrument cluster trim bezel is removed, then the cluster retaining screws, after which the cluster pulls out and the rear connectors detach. Replacement clusters are not plug-and-play and require programming.
- PART
- 78100-THR-A01
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
78100-THR-A11 Verify by VIN 2019, 2026
_years covers only 2019, 2026 for this generation
Used/donor module guide
Compatible donor years: 2019, 2026
Donor must match part family 78100-THR-A11 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, in the dashboard directly behind the steering wheel
Reached from inside the cabin. The instrument cluster trim bezel is removed, then the cluster retaining screws, after which the cluster pulls out and the rear connectors detach. Replacement clusters are not plug-and-play and require programming.
- PART
- 78100-THR-A11
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
78100-THR-AJ1, 78100-THR-AL10 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family 78100-THR-AJ1 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, in the dashboard directly behind the steering wheel
Reached from inside the cabin. The instrument cluster trim bezel is removed, then the cluster retaining screws, after which the cluster pulls out and the rear connectors detach. Replacement clusters are not plug-and-play and require programming.
- PART
- 78100-THR-AJ1, 78100-THR-AL10
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
78100-THR-AN2 Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Donor must match part family 78100-THR-AN2 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, in the dashboard directly behind the steering wheel
Reached from inside the cabin. The instrument cluster trim bezel is removed, then the cluster retaining screws, after which the cluster pulls out and the rear connectors detach. Replacement clusters are not plug-and-play and require programming.
- PART
- 78100-THR-AN2
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
78100-THR-AP1 Verify by VIN 2022-2025
_years covers only 2022-2025 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023, 2024, 2025
Donor must match part family 78100-THR-AP1 - requires cloning
Always match the full part number before buying a used module.
Access
Located: Cabin, in the dashboard directly behind the steering wheel
Reached from inside the cabin. The instrument cluster trim bezel is removed, then the cluster retaining screws, after which the cluster pulls out and the rear connectors detach. Replacement clusters are not plug-and-play and require programming.
- PART
- 78100-THR-AP1
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) x3
Part 1 Verify by VIN 2018-2019
_years covers only 2018-2019 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Part 2 Verify by VIN 2018-2019
_years covers only 2018-2019 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- cross-year extension)
Part 3 Verify by VIN 2020-2026
_years covers only 2020-2026 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (cable reel 77900 family)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Other x15
39100-THR-A01 Verify by VIN 2018
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Always match the full part number before buying a used module.
- PART
- 39100-THR-A01
- NOTES
- HDS audio system diagnostic after replacement. CarPlay/Android Auto on EX+ trims. Navigation variant on Touring/Elite. VIN registration via HDS.
39100-THR-B01 Verify by VIN 2018
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Always match the full part number before buying a used module.
- PART
- 39100-THR-B01
- NOTES
- Available Touring/Elite. Dual HDMI inputs. HDS unit check after replacement. Verify rear screen, wireless headphone transmitter, and HDMI function.
Part 3 Verify by VIN 2018
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Always match the full part number before buying a used module.
- NOTES
- Passenger side forward-view camera in mirror housing on equipped trims. Activates on right turn signal. Verify display on HU and no camera DTC.
39100-THR-A01 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- 39100-THR-A01
- NOTES
- HDS diagnostic after replacement. CarPlay/Android Auto on EX+. VIN registration via HDS.
39100-THR-B01 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- 39100-THR-B01
- NOTES
- Touring/Elite. Dual HDMI. Verify display and wireless headphones.
39100-THR-A01 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- 39100-THR-A01
- NOTES
- HDS diagnostic after replacement. CarPlay/Android Auto EX+.
39100-THR-B01 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- 39100-THR-B01
- NOTES
- Touring/Elite only. Verify display + HDMI + wireless headphones.
39530-THR-C01 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- 39530-THR-C01
- NOTES
- Elite trim only. Overhead ceiling mount. HDS check after replacement. Verify display on HU and intercom function.
39100-THR-C01 Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- 39100-THR-C01
- NOTES
- New 9" unit on 2021 refresh. HDS diagnostic after replacement. Wireless CarPlay/Android Auto on Touring+. VIN registration via HDS.
39100-THR-B01 Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- 39100-THR-B01
- NOTES
- Touring/Elite. Verify display + HDMI + wireless headphones.
39530-THR-C01 Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- 39530-THR-C01
- NOTES
- Elite trim only. Overhead mount. HDS check after replacement.
39100-THR-C01 Verify by VIN 2022
_years covers only 2022 for this generation
Used/donor module guide
Compatible donor years: 2022
Always match the full part number before buying a used module.
- PART
- 39100-THR-C01
- NOTES
- HDS diagnostic. Wireless CarPlay/Android Auto Touring+. VIN registration via HDS.
39100-THR-B01 Verify by VIN 2022-2026
_years covers only 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 39100-THR-B01
- NOTES
- Touring/Elite. Verify display + HDMI + headphones.
39100-THR-C01 Verify by VIN 2023
_years covers only 2023 for this generation
Used/donor module guide
Compatible donor years: 2023
Always match the full part number before buying a used module.
- PART
- 39100-THR-C01
- NOTES
- HDS diagnostic. Wireless CarPlay/Android Auto Touring+.
39100-THR-C01 Verify by VIN 2024-2026
_years covers only 2024-2026 for this generation
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 39100-THR-C01
- NOTES
- HDS diagnostic. Wireless CarPlay/Android Auto Touring+. Final model year - verify iN availability.
Module part numbers by generation
41 full part numbers across 18 module groups for this generation.
Antilock Brakes / Traction Control Systems
-
35000T0A003 -
35300TBAA21 -
35470TEAR01 -
47510THRA02 -
47560THRA02 -
57100THRA03 -
57100THRA13 -
57100THRA43 -
57450THRA01 -
57455THRA01
ABS / VSA Modulator Assembly
-
57100THRA03 -
57100THRA03Includes: Control Module., Lx -
57100THRA13Anti-Lock Brakes, Modulator Valve, Ex, Ex-l -
57100THRA13 -
57100THRA43 -
57100THRA43Includes: Control Module., Touring, Elite
ACC Distance / Millimeter-Wave Radar Sensor
-
36802THRA02 -
36802THRA02Cruise Control, Sensor, Radar Sensor
Forward / Lane Departure Camera
-
36160THRA74 -
36160THRA74Lane Departure Warning, Camera -
39530THRA02 -
39530THRA02Parking Aid, Camera
Body Control Module
-
38800THRA01 -
38800THRA01Lx -
38800THRA11 -
38800THRA11Ex -
38800THRA22 -
38800THRA22Ex-l -
38800THRA31 -
38800THRA31Touring -
38800THRA41 -
38800THRA41Controls, Body Control Module, Elite
Blind Spot Radar Sensors
-
36931THRA11Right -
36936THRA11Lane Departure Warning, Sensor, Blind Spot Radar Assembly, Left
Engine Control Module (ECM / PCM)
-
378205MRA04 -
378205MRA04Lx -
378205MRA25 -
378205MRA25Ex, Ex-l -
378205MRA75 -
378205MRA75Powertrain Control, ECM, Elite
Instrument Cluster
-
78100THRA01 -
78100THRA01Lx -
78100THRA21 -
78100THRA21Ex -
78100THRA41 -
78100THRA41Ex-l -
78100THRA71 -
78100THRA71Touring -
78100THRA81 -
78100THRA81Instruments & Gauges, Instrument Cluster, Elite
Lane Departure System
-
36160THRA74 -
36931THRA11
Power Liftgate Control Module
-
74970THRA02Liftgate, Control Module, Power Liftgate, Elite -
74970THRA12Ex-l
Power Trunk / Liftgate Control Module
-
74970THRA02 -
74970THRA12
Parking Assist Control Module
-
39670THRA01 -
39670THRA01Parking Aid, Control Module
Parking Assist Distance Sensors
-
39680T6ZA01ZB -
39680T6ZA01ZBOrder By Vehicle Application And Color., Red -
39680T6ZA01ZC -
39680T6ZA01ZCOrder By Vehicle Application And Color., Pewter -
39680T6ZA01ZD -
39680T6ZA01ZDOrder By Vehicle Application And Color., Silver -
39680T6ZA01ZE -
39680T6ZA01ZEOrder By Vehicle Application And Color., Modern Steel Metallic -
39680T6ZA01ZF -
39680T6ZA01ZFOrder By Vehicle Application And Color., Rear, Black -
39680T6ZA01ZG -
39680T6ZA01ZGOrder By Vehicle Application And Color., White -
39680T6ZA01ZH -
39680T6ZA01ZHOrder By Vehicle Application And Color., Forest Mist Metallic -
39680T6ZA01ZJ -
39680T6ZA01ZJOrder By Vehicle Application And Color., Blue -
39680THRA01 -
39680THRA01Parking Aid, Sensor, Front
Collision Avoidance Sensor
-
36931THRA11 -
36936THRA11
Rear Vision Camera
-
39530THRA02 -
39530THRA02Parking Aid, Camera
Supplemental Restraint System SDM Module
-
77960THRA02 -
77960THRA02Supplemental Restraint System, SDM Module, Sdm Module
Steering Angle Sensor
-
35000T0A003 -
35000T0A003Steering Column, Position Sensor
Wheel Speed Sensors
-
47560THRA02Includes: Control Module., Rear Speed Sensor, Left -
57455THRA01Anti-Lock Brakes, Front Speed Sensor, Left
11 gateway, immobilizer, and security items documented across the 2018-2026 generation.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Honda Smart Entry Gen 3 (EEPROM-based, 5th Gen Odyssey)
- Add Key Yes
- All Keys Lost Yes
Honda Smart Entry - EEPROM-based immobilizer; no OBD pin extraction; AKL requires Honda iN dealer authorization
IMMOBILIZER MODULES
Immobilizer Modules
Honda Smart Entry / IMMO (Keyless Access Control Unit) Verify by VIN 2018 35100-THR-A01
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Donor must match part family 35100-THR-A01; VIN-locked
Always match the full part number before buying a used module.
- PART
- 35100-THR-A01
- SECURITY
- EEPROM
- NOTES
- EEPROM-based immobilizer. No pin code available via OBD2 - dealer iN authorization required for all key programming including AKL. New unit erases all registered keys - all customer keys must be re-registered via HDS + iN. Max 6 keys. ECM replacement also requires IMMO re-match via HDS.
Honda Smart Entry / IMMO Verify by VIN 2019 35100-THR-A01
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- 35100-THR-A01
- SECURITY
- EEPROM
- NOTES
- EEPROM-based - no OBD pin. Honda iN authorization required for key programming and AKL. ECM replacement requires IMMO re-match via HDS. Max 6 keys.
Honda Smart Entry / IMMO Verify by VIN 2020 35100-THR-A01
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- 35100-THR-A01
- SECURITY
- EEPROM
- NOTES
- EEPROM-based. No OBD pin. Honda iN authorization required for all key work. Max 6 keys. ECM IMMO re-match required if ECM replaced.
Honda Smart Entry / IMMO Verify by VIN 2021 35100-THR-A01
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- 35100-THR-A01
- SECURITY
- EEPROM
- NOTES
- EEPROM-based. No OBD pin. iN authorization required. Max 6 keys. IMMO re-match if ECM replaced.
Honda Smart Entry / IMMO Verify by VIN 2022-2023 35100-THR-A01
_years covers only 2022-2023 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023
Always match the full part number before buying a used module.
- PART
- 35100-THR-A01
- SECURITY
- EEPROM
- NOTES
- No OBD pin. iN auth required. Max 6 keys.
Honda Smart Entry / IMMO Verify by VIN 2024-2026 35100-THR-A01
_years covers only 2024-2026 for this generation
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 35100-THR-A01
- SECURITY
- EEPROM
- NOTES
- No OBD pin. iN auth required. Max 6 keys. Final Odyssey year - iN service tools remain active for current owners.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob Verify by VIN 2018 35118-THR-A00
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Always match the full part number before buying a used module.
- PART
- 35118-THR-A00
- NOTES
- EEPROM-based. Add key: HDS + iN authorization (must have at least 1 working registered key). AKL (all keys lost): HDS + mandatory Honda iN dealer authorization. Max 6 keys per vehicle. Blade emergency key: HON66 / HON66T cut.
Proximity Smart Key Fob Verify by VIN 2019 35118-THR-A00
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- 35118-THR-A00
- NOTES
- Add key: HDS + iN auth. AKL: HDS + mandatory iN dealer auth. Max 6 keys. Emergency blade: HON66/HON66T.
Proximity Smart Key Fob Verify by VIN 2020 35118-THR-A00
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- 35118-THR-A00
- NOTES
- HDS + iN authorization for add key or AKL. Max 6 keys. Emergency blade HON66/HON66T.
Proximity Smart Key Fob Verify by VIN 2021 35118-THR-A00
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- 35118-THR-A00
- NOTES
- HDS + iN auth for add key or AKL. Max 6 keys. Emergency blade HON66/HON66T.
Proximity Smart Key Fob Verify by VIN 2022-2026 35118-THR-A00
_years covers only 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 35118-THR-A00
- NOTES
- HDS + iN auth. Max 6 keys. Emergency blade HON66/HON66T.
Replacement Notes
Honda Smart Entry Gen 3 (EEPROM-based, 5th Gen Odyssey) system. HDS (Honda Diagnostic System) required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Honda ACE Unibody - High-Tensile / Ultra-High-Tensile Steel
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Honda F-CAN (powertrain, 500 kbps) + B-CAN (body, 125 kbps); OBD2 DLC Pin 6/14 HS-CAN
- Infotainment
- Honda Display Audio 8" touchscreen; Apple CarPlay/Android Auto standard EX+; Honda Rear Entertainment System with 10.2" screen available on Touring/Elite; Honda Satellite-Linked Navigation on Touring/Elite
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Available
Reviewed coverage: 2020-2021 - 3.5L i-VTEC (J35Y6).
Confirm the exact engine, ECU, and any prerequisite access method before service.
Confirmation is limited to reviewed year/engine rows; other variants require confirmation. - Cylinder Deactivation Delete (VCM Delete)
- Confirmed
Reviewed coverage: 2018 - 3.5L V6.
Confirm the 3.5L V6 and VCM system by VIN before service.
Confirmation is limited to reviewed year/engine rows; other variants require confirmation.
WHAT WE RESOLVE
5th Gen RL6 (2018-2026) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Camera (Monocular) (2018), Forward Radar (77GHz) (2018), Adaptive Cruise Control (ACC) (2018), and Lane Keep Assist / Lane Departure Warning (LKA/LDW) (2018). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve SRS Control Unit (2018-2023), SRS Control Unit (2022), and SRS Control Unit (2023). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 11 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Honda Odyssey (2018-2026) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Honda Odyssey (2018-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Honda Odyssey (2018-2026)?
The Honda Odyssey (2018-2026) generation currently shows 40 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include SRS Control Unit (2018-2023), SRS Control Unit (2022), and SRS Control Unit (2023). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 77960-THR-A020-M2 (2018-2023) - confirm for your exact year/VIN.
Does Honda Odyssey (2018-2026) need ADAS calibration after glass or collision work?
The merged generation data documents 19 ADAS systems, including Forward Camera (Monocular) (2018), Forward Radar (77GHz) (2018), Adaptive Cruise Control (ACC) (2018), Lane Keep Assist / Lane Departure Warning (LKA/LDW) (2018), and Rear View Camera (2018). Calibration triggers include Windshield Replacement (2018), Front Bumper Repair or Replacement (2018), Rear Bumper or Liftgate Repair (2018), and Front or Side Collision (2018). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Honda Odyssey (2018-2026)?
Yes. The generation data includes 7 SRS records, including SRS Control Unit (2018-2023), SRS Control Unit (2022), and SRS Control Unit (2023). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 77960-THR-A020-M2 (2018-2023) - confirm for your exact year/VIN.
Do all Honda Odyssey (2018-2026) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2018-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Honda Odyssey (2018-2026)?
Yes, where the VIN and security workflow support it. The generation data includes 11 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Honda Odyssey (2018-2026)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module intake is temporarily unavailable; do not ship a module unless support confirms next steps.
Is Honda Odyssey (2018-2026) service mobile or mail-in?
Mobile service covers DFW on-vehicle diagnostics, key programming, post-repair coding, and supported module work. Mail-in module intake is temporarily unavailable. We confirm the active path for your exact year/VIN before scheduling; do not ship a module unless support confirms next steps.