VIN / Build Split
VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2020 Honda Odyssey Supported Services
2020 Honda Odyssey
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform Honda RL6 / RC1-RC2 (5th Gen Odyssey)
- CAN Architecture Honda F-CAN (powertrain, 500 kbps) + B-CAN (body, 125 kbps); OBD2 DLC Pin 6/14 HS-CAN
- Security Honda Smart Entry - EEPROM-based immobilizer; no OBD pin extraction; AKL requires Honda iN dealer authorization
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Honda Odyssey. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and CabinWatch Interior Camera (Elite), this Honda RL6 / RC1-RC2 (5th Gen Odyssey) platform vehicle, Honda Smart Entry Gen 3 (EEPROM-based, 5th Gen Odyssey) immobilizer support, Honda Display Audio infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
Honda RL6 / RC1-RC2 (5th Gen Odyssey)
Production
2005-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD
Engine
-
CAN Speed
Honda F-CAN (powertrain, 500 kbps) + B-CAN (body, 125 kbps); OBD2 DLC Pin 6/14 HS-CAN
YEAR-SPECIFIC NOTES
Infotainment
Honda Display Audio
Exact-year service summary for 2020 Honda Odyssey
ADAS coverage
This 2020 Honda Odyssey page documents 4 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), CabinWatch Interior Camera (Elite), and Rear View Camera.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair, Collision / Airbag Deployment, and Power Sliding Door Service. Use the ADAS tab for the full trigger list.
View triggersTarget setup planning
Approved target-planning data maps this vehicle family to LAM01-04-L&LAM01-04-R. Primary Acura/Honda static target set for FCW/LDW and LKAS forward-camera calibration planning. Confirm VIN, trim, DTCs, sensor part number, and scan-tool procedure before setup.
View ADAS dataProgrammable modules
This page indexes 16 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2020 Honda Odyssey.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2020 Honda Odyssey using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Honda Sensing standard all trims: Collision Mitigation Braking System/Automatic - Standard; Platform: Honda RL6 / RC1-RC2 (5th Gen Odyssey) - Confirmed
Driver-assist suite
Honda Sensing standard all trims: Collision Mitigation Braking System/Automatic Emergency Braking, Lane Keeping Assist System, LDWS, Adaptive Cruise Control with low-speed follow, Road Departure Mitigation, Automatic High Beams
VIN and build split
VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code.
Infotainment context
Honda Display Audio; Honda Display Audio 8"; CarPlay/Android Auto EX+; Rear Entertainment 10.2" (Touring/Elite); CabinWatch cabin camera + CabinTalk intercom available on Elite
Network and access
CAN: Honda F-CAN (powertrain, 500 kbps) + B-CAN (body, 125 kbps); OBD2 DLC Pin 6/14 HS-CAN
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Honda HDS / i-HDS / Honda Diagnostic Software
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2020 Honda Odyssey. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
4 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
4 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
2 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
3 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
6 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Honda Sensing standard all trims: Collision Mitigation Braking System/Automatic
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: Honda RL6 / RC1-RC2 (5th Gen Odyssey)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Honda Odyssey issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), CabinWatch Interior Camera (Elite), and Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Honda RL6 / RC1-RC2 (5th Gen Odyssey) platform uses Honda F-CAN (powertrain, 500 kbps) + B-CAN (body, 125 kbps); OBD2 DLC Pin 6/14 HS-CAN.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Honda Sensing standard all trims: Collision Mitigation Braking System/Automatic Emergency Braking, Lane Keeping Assist System, LDWS, Adaptive Cruise Control with low-speed follow, Road Departure Mitigation, Automatic High Beams
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | 36150-THR-A11 | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | 36802-THR-A01 | |
| CabinWatch Interior Camera (Elite) | Interior Camera | Camera | None | YES | 39530-THR-C01 | |
| Rear View Camera | Rear Camera | Camera | Static | YES | 39530-THR |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Honda Sensing Camera, LKAS, CMBS, RDM, AHB, ACC
HDS static camera calibration required. Level surface + HDS target ~1m from bumper.
Front Bumper Repair Affected: Forward Radar, CMBS, ACC
HDS radar boresight calibration with bumper installed.
Collision / Airbag Deployment Affected: SRS ECU, airbags, pretensioners, Honda Sensing
SRS ECU replacement required after hard deployment. Re-calibrate Honda Sensing if front disturbed.
Power Sliding Door Service Affected: PSDC Left/Right, pinch sensors
HDS pinch force calibration required. Verify full cycle and obstacle reversal.
Forward Camera Replacement
Camera module replacement requires full recalibration using HDS.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using HDS.
SRS Modules
SRS Control Unit 77960-THR-A020-M2
- Part number
- 77960-THR-A020-M2
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
SRS Control Unit 77960-THR-A120-M2
- Part number
- 77960-THR-A120-M2
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
ECU Modules
ECM - 3.5L J35Y6 V6 i-VTEC 37820-RLV-A01
- Part number
- 37820-RLV-A01
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Denso SH72544R
- Notes
- HDS/i-HDS Programming Port flash programming required. VIN registration + IMMO seed write after replacement. Injector balance correction data (QR/datamatrix on each injector) entry via HDS. Throttle position initialization and idle learn via HDS. Variable Cylinder Management (VCM) active - verify cylinder deactivation post-programming.
TCM - 10-Speed Automatic 28100-5MX-A01
- Part number
- 28100-5MX-A01
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Denso
- Notes
- HDS TCM programming after replacement. Adaptive shift relearn required: 50-100 miles mixed-cycle driving. Honda ATF DW-1 fluid. Verify all shift points and torque converter lockup post-replacement.
EPS Control Unit (Electric Power Steering) 39980-THR-A01
- Part number
- 39980-THR-A01
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas
- Notes
- HDS EPS initialization + torque sensor zero calibration after replacement. Level surface, steering in center position. Verify no EPS DTC.
BCM Modules
Body Control Module (BCM) 38809-THR-A01
- Part number
- 38809-THR-A01
- Security
- EEPROM
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- HDS BCM programming + VIN registration. Controls sliding doors, liftgate, lighting, locks, CabinWatch interface.
Keyless Access Control Unit 35100-THR-A01
- Part number
- 35100-THR-A01
- Security
- EEPROM
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Honda iN authorization required. All keys erased on replacement. Max 6 keys.
Power Sliding Door Control Unit - Left 72010-THR-A01
- Part number
- 72010-THR-A01
- Security
- can
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- HDS programming + pinch force calibration.
Power Sliding Door Control Unit - Right 72510-THR-A01
- Part number
- 72510-THR-A01
- Security
- can
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- HDS programming + pinch force calibration.
TCU / TCM Transmission Modules
TCU - 10AT 10-Speed Auto 28100-5KE
- Part number
- 28100-5KE
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7267
- Notes
- Requires HDS or J2534 tool for initial programming. ATF-DW1 fluid spec. TCU adaptation and shift point learning required after installation.
ABS / Brake Modules
ABS/VSA Modulator-Control Unit 57110-THR-A01
- Part number
- 57110-THR-A01
- Cloning supported
- Yes
- Notes
- Bosch VSA. HDS power bleed + SAS zero-point calibration. Drive 35+ mph straight after reset.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 78100-THR-AJ1, 78100-THR-AL10
- Part number
- 78100-THR-AJ1, 78100-THR-AL10
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (cable reel 77900 family)
Connectivity & Accessories
Display Audio Head Unit (8") 39100-THR-A01
- Part number
- 39100-THR-A01
- Notes
- HDS diagnostic after replacement. CarPlay/Android Auto EX+.
Rear Entertainment System (10.2") 39100-THR-B01
- Part number
- 39100-THR-B01
- Notes
- Touring/Elite only. Verify display + HDMI + wireless headphones.
CabinWatch / CabinTalk Overhead Console Unit 39530-THR-C01
- Part number
- 39530-THR-C01
- Notes
- Elite trim only. Overhead ceiling mount. HDS check after replacement. Verify display on HU and intercom function.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Honda ACE Unibody - High-Tensile / Ultra-High-Tensile Steel
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Honda F-CAN (powertrain, 500 kbps) + B-CAN (body, 125 kbps); OBD2 DLC Pin 6/14 HS-CAN
- Infotainment
- Honda Display Audio 8"; CarPlay/Android Auto EX+; Rear Entertainment 10.2" (Touring/Elite); CabinWatch cabin camera + CabinTalk intercom available on Elite
- OTA Capable
- No
- Infotainment Name
- Honda Display Audio
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2020 - 3.5L i-VTEC (J35Y6).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Officially supported (openpilot master)
- Package
- Honda Sensing
- Hardware
- Comma 3X + Honda Nidec / Bosch A harness
- Harness
- Honda Nidec / Bosch A Harness
2018-20 Nidec, 2021-26 Bosch A.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2020 Honda Odyssey?
ADAS calibration pricing for a 2020 Honda Odyssey depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), CabinWatch Interior Camera (Elite), and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2020 Honda Odyssey?
Yes. The 2020 Honda Odyssey uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 77960-THR-A020-M2. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2020 Honda Odyssey?
After windshield replacement on a 2020 Honda Odyssey, Forward Camera (Monocular), Forward Radar (77GHz), CabinWatch Interior Camera (Elite), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2020 Honda Odyssey module service take?
Most 2020 Honda Odyssey onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 15 programmable modules documented in our database (3 ECU, 4 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2020 Honda Odyssey on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2020 Honda Odyssey. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2020 Honda Odyssey programming?
Every programming, cloning, and calibration job on the 2020 Honda Odyssey is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2020 Honda Odyssey can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2020 Honda Odyssey. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 4 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 4 ADAS module
Infotainment on this platform: Honda Display Audio. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2020 Honda Odyssey covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 36150-THR-A11, 36802-THR-A01, 39530-THR-C01, 39530-THR
- ECU / PCM Part Numbers
- 37820-RLV-A01
- BCM / Body Module Part Numbers
- 38809-THR-A01, 35100-THR-A01, 72010-THR-A01, 72510-THR-A01
- TCU / TCM Part Numbers
- 28100-5KE
- SRS / Airbag Module Part Numbers
- 77960-THR-A020-M2, 77960-THR-A120-M2
- ABS / EBCM Part Numbers
- 57110-THR-A01, 5TH GEN ODYSSEY RL6, RC1-RC2
- Instrument Cluster (IPC) Part Numbers
- 78100-THR-AJ1, 78100-THR-AL10
- Transmission Control Module (TCM) Part Numbers
- 28100-5KE
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (CABLE REEL 77900 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2020 Honda Odyssey
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
i-HDS Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.