Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065ADAS, Module Repair & Programming
Trim and package availability varies by market for the 2025 Genesis G90. Confirm specific ADAS fitment before calibration.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2025 Genesis G90. On this vehicle we cover documented systems include Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (Continental 77GHz), and Highway Driving Assist (HDA), this Genesis GN architecture (derived from Hyundai N3 platform for sedans, PE platform for GV SUVs) platform vehicle, Genesis Smart Sense PEPS; BCM-based rolling immobilizer (AUTOSAR); AES-128 rolling code immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
This 2025 Genesis G90 page documents 8 ADAS systems, including Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (Continental 77GHz), Highway Driving Assist (HDA), and Blind Spot Detection (BSD) - Left Rear Radar.
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Radar Removal / Replacement, Blind Spot Sensor Replacement, and BCM Replacement. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 16 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 2 gateway, immobilizer, or key-security records for this 2025 Genesis G90.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2025 Genesis G90 using the documented systems and module data on this page.
Choose a sectionGenesis Driver Assistance: Forward Collision Avoidance Assist, Lane Keeping Assi - Available; Immobilizer: Genesis Smart Sense PEPS - Standard; Platform: Genesis GN architecture (derived from Hyundai N3 platform fo - Confirmed
Genesis Driver Assistance: Forward Collision Avoidance Assist, Lane Keeping Assist, Blind Spot Collision Warning, Smart Cruise Control with S&G, Rear Cross Traffic Collision Avoidance
Genesis Connected Services; 14.5" touchscreen (GV80/G90) or 10.25" (G70/GV70); OTA via Genesis Connected
CAN: HS-CAN + CANFD; Hyundai/Genesis AUTOSAR network; OBD2 DLC Pin 6/14
Choose a section to view data
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Verify platform code matches when cross-referencing part numbers across model years.
Common Genesis G90 issues we resolve on this platform: Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (Continental 77GHz), Highway Driving Assist (HDA), and Blind Spot Detection (BSD) - Left Rear Radar recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Genesis GN architecture (derived from Hyundai N3 platform for sedans, PE platform for GV SUVs) platform uses HS-CAN + CANFD; Hyundai/Genesis AUTOSAR network; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - Genesis Smart Sense PEPS; BCM-based rolling immobilizer (AUTOSAR); AES-128 rolling code immobilizer; add-key procedure.
Not supported - 2025 outside openpilot year range (2017-2020)
Not in openpilot support tree as of April 2026. Supported years: 2017-2020. 2021+ new-gen G90 not yet ported.
Documented for the 2nd Gen RS4 - includes this 2025 model year. Open the full coverage on the generation guide.
ADAS calibration pricing for a 2025 Genesis G90 depends on which of its 8 documented systems need work after a repair. This vehicle is documented with Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (Continental 77GHz), Highway Driving Assist (HDA), Blind Spot Detection (BSD) - Left Rear Radar, and Blind Spot Detection (BSD) - Right Rear Radar. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs and we return a number within 4 hours.
Yes. The 2025 Genesis G90 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 1327106001. Bench-only or in-vehicle - both paths are supported. Send the part number and a description of what triggered the light, and we will provide a quote and ETA.
After windshield replacement on a 2025 Genesis G90, Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (Continental 77GHz), and Rear View Camera (RVC) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site (DFW Metroplex) with OE target fixtures or via mail-in for the front camera/radar module.
Most 2025 Genesis G90 jobs complete same-day once the vehicle or module arrives. This vehicle has roughly 13 programmable modules documented in our database (3 ECU, 1 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Module-bench work (ECU clones, BCM reprograms, SRS resets) ships back inside 1-3 business days including return shipping. ADAS calibration is on-site for DFW or mail-in for the front module.
Both. We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding) and a mail-in bench for module-only jobs (ECU cloning, BCM repair, SRS reset, TCU clone). Quote the work and we will tell you which path is right for the 2025 Genesis G90.
Every programming, cloning, and calibration job on the 2025 Genesis G90 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Yes, our key programming specialists handle all-keys-lost scenarios on the 2025 Genesis G90. Immobilizer generation on this platform: Genesis Smart Sense PEPS; BCM-based rolling immobilizer (AUTOSAR); AES-128 rolling code. Submit the VIN and we will confirm the procedure and quote before scheduling.
We program, clone, repair, or replace the full programmable-module stack on a 2025 Genesis G90. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Send your VIN and we'll confirm exact module support and pricing for your specific vehicle within 4 hours.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.