Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2023 Genesis G90 Supported Services

2023 Genesis G90

ADAS calibration, module programming, and security relearns

Trim and package availability varies by market for the 2023 Genesis G90. Confirm specific ADAS fitment before calibration.

Technical snapshot
  • Platform Genesis GN architecture (derived from Hyundai N3 platform for sedans, PE platform for GV SUVs)
  • CAN Architecture HS-CAN + CANFD; Hyundai/Genesis AUTOSAR network; OBD2 DLC Pin 6/14
  • Security Genesis Smart Sense PEPS; UHF proximity key; Genesis Connected Services digital key; rolling code AES-128

What do you need fixed?

Choose a service to start your quote.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2023 Genesis G90. On this vehicle we cover documented systems include Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (Continental 77GHz), and Highway Driving Assist (HDA), this Genesis GN architecture (derived from Hyundai N3 platform for sedans, PE platform for GV SUVs) platform vehicle, Genesis Smart Sense PEPS; BCM-based rolling immobilizer (AUTOSAR); AES-128 rolling code immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.

Platform
Genesis GN architecture (derived from Hyundai N3 platform for sedans, PE platform for GV SUVs)
Production
2021-present
Trim Levels
Trim and package availability varies by market for the 2023 Genesis G90. Confirm specific ADAS fitment before calibration.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
HS-CAN + CANFD; Hyundai/Genesis AUTOSAR network; OBD2 DLC Pin 6/14
SERVICE SNAPSHOT

Exact-year service summary for 2023 Genesis G90

ADAS coverage

This 2023 Genesis G90 page documents 8 ADAS systems, including Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (Continental 77GHz), Highway Driving Assist (HDA), and Blind Spot Detection (BSD) - Left Rear Radar.

View ADAS data

Calibration triggers

Documented calibration triggers include Windshield Replacement, Front Radar Removal / Replacement, Blind Spot Sensor Replacement, and BCM Replacement. Use the ADAS tab for the full trigger list.

View triggers

Programmable modules

This page indexes 17 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

This page includes 2 gateway, immobilizer, or key-security records for this 2023 Genesis G90.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2023 Genesis G90 using the documented systems and module data on this page.

Choose a section
EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Genesis Driver Assistance: Forward Collision Avoidance Assist, Lane Keeping Assi - Available; Platform: Genesis GN architecture (derived from Hyundai N3 platform fo - Confirmed

Driver-assist suite

Genesis Driver Assistance: Forward Collision Avoidance Assist, Lane Keeping Assist, Blind Spot Collision Warning, Smart Cruise Control with S&G, Rear Cross Traffic Collision Avoidance

Infotainment context

Genesis Connected Services; 14.5" touchscreen (GV80/G90) or 10.25" (G70/GV70); OTA via Genesis Connected

Network and access

CAN: HS-CAN + CANFD; Hyundai/Genesis AUTOSAR network; OBD2 DLC Pin 6/14

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Hyundai GDS Mobile / Hyundai KDS

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2023 Genesis G90. Counts reflect modules our techs have programmed or calibrated on this exact platform.

Need something not listed? Most undocumented modules can still be programmed.

Get a Quote
Feature availability 2

Genesis Driver Assistance: Forward Collision Avoidance Assist, Lane Keeping Assi

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

Platform: Genesis GN architecture (derived from Hyundai N3 platform fo

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Genesis G90 issues we resolve on this platform: Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (Continental 77GHz), Highway Driving Assist (HDA), and Blind Spot Detection (BSD) - Left Rear Radar recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Genesis GN architecture (derived from Hyundai N3 platform for sedans, PE platform for GV SUVs) platform uses HS-CAN + CANFD; Hyundai/Genesis AUTOSAR network; OBD2 DLC Pin 6/14.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Genesis Driver Assistance: Forward Collision Avoidance Assist, Lane Keeping Assist, Blind Spot Collision Warning, Smart Cruise Control with S&G, Rear Cross Traffic Collision Avoidance

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Forward Collision-Avoidance Assist (FCA) - Front CameraForward CameraCameraStatic YES-
Forward Radar (Continental 77GHz)Front RadarRadarStatic YES-
Highway Driving Assist (HDA)Highway Driving AssistCameraStatic + Dynamic YES-
Blind Spot Detection (BSD) - Left Rear RadarSide RadarRadarNone YES-
Blind Spot Detection (BSD) - Right Rear RadarSide RadarRadarNone YES-
Around View Monitor (AVM) - Surround ViewSurround CameraCameraStatic YES-
Rear View Camera (RVC)Rear CameraCameraNone YES-
Park Distance Control (PDC) - UltrasonicParking SensorUltrasonicNone YES-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

Windshield Replacement Affected: Front Camera, Genesis Advanced Safety

Static + dynamic camera calibration via GDS Mobile required after windshield replacement.

Front Radar Removal / Replacement Affected: Front Radar, ACC, Genesis Advanced Safety

Radar alignment and calibration via GDS Mobile. Road test for dynamic calibration required.

Blind Spot Sensor Replacement Affected: BSM, Lane Change Assist

Blind spot sensor alignment and calibration via GDS Mobile.

BCM Replacement Affected: BCM, Immobilizer, BlueLink

GDS Mobile + BlueLink server authorization required. IMMO 4/5 relearn required.

ABS Module Replacement Affected: ABS, ESC, Brake System

GDS Mobile bleed procedure and ESC calibration required.

SRS Modules

SRS Control Module (SRSCM) 11256-08201
Part number
11256-08201
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
SRS Control Module (SRSCM) 11254-06201
Part number
11254-06201
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
SRS Control Module (SRSCM) 13271-06001
Part number
13271-06001
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
SRS Control Module (SRSCM) 13395-08001
Part number
13395-08001
Location
Under center console
Manufacturer
Continental
Notes
Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.

ECU Modules

Engine Control Module (ECM)
Protocol / method
OBD
Security
IMMO 4 / AES
Coding required
Yes
Cloning supported
No
Notes
ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Online server authentication required. Cloning not supported on 2018+ VIN-locked units.
Transmission Control Module (TCM)
Protocol / method
OBD
Security
IMMO 4 / AES
Coding required
Yes
Cloning supported
No
Notes
TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning not supported.
Body Control Module (BCM)
Protocol / method
OBD
Security
IMMO 4 / AES
Coding required
Yes
Cloning supported
No
Notes
BCM requires coding to vehicle VIN after replacement. Security gateway access required on 2018+ models. All comfort/convenience modules must be re-synced via our diagnostic software.

BCM Modules

Body Control Module (BCM)
Security
IMMO 4/5 + BlueLink Auth
Coding required
Yes
Cloning supported
No
Notes
GDS Mobile + BlueLink server authorization required for BCM programming. IMMO 4/5 integration.

TCU / TCM Transmission Modules

TCU - 8G8SP 8-Speed Auto 95440-J5
Part number
95440-J5
Protocol / method
J2534
Coding required
Yes
Cloning supported
Yes
Chip / MCU
Continental TC1797
Notes
Hyundai/Kia 8-speed AT, requires GDS2 programming and adaptation, SP-IV ATF, shift relearn via test drive
TCU - 8G8HP 8-Speed Auto (3.5T) 95440-J5
Part number
95440-J5
Protocol / method
J2534
Coding required
Yes
Cloning supported
Yes
Chip / MCU
Continental TC1797
Notes
ZF 8HP transmission variant, requires GDS2 programming, ZF LifeGuard 8 ATF, adaptation reset required

ABS / Brake Modules

ABS/ESC Module (Mando/Bosch)
Cloning supported
No
Notes
GDS Mobile bleed sequence and wheel speed sensor reset required after ABS module replacement.

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) 94013-T4030
Part number
94013-T4030
Cloning supported
Yes
Notes
RS4 G90 2023 redesign IPC 12.3" digital cluster
Instrument Panel Cluster (IPC) 94013-T4040
Part number
94013-T4040
Cloning supported
Yes
Notes
RS4 G90 2023 redesign IPC Ultimate
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
INTEGRATED (SCM)

Connectivity & Accessories

Genesis Connected Services
Notes
Programming required after replacement. Verify software version compatibility before install.
Remote Start
Notes
Factory remote start. BCM configuration required after replacement on equipped vehicles.
Telematics Control Unit (TCU)
Notes
Cellular connectivity module. Subscription activation required post-replacement. VIN registration with manufacturer.
ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
High-strength steel unibody with aluminum hood and front structure; multi-link suspension
OBD Protocol
ISO 15765-4 CAN (500 kbps)
CAN Architecture
HS-CAN + CANFD; Hyundai/Genesis AUTOSAR network; OBD2 DLC Pin 6/14
Infotainment
Genesis Connected Services; 14.5" touchscreen (GV80/G90) or 10.25" (G70/GV70); OTA via Genesis Connected
OTA Capable
Yes
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Contact us
OPENPILOT / COMMA.AI

Openpilot Compatibility

Not Supported

Not supported - 2023 outside openpilot year range (2017-2020)

Not in openpilot support tree as of April 2026. Supported years: 2017-2020. 2021+ new-gen G90 not yet ported.

FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2023 Genesis G90?

ADAS calibration pricing for a 2023 Genesis G90 depends on which of its 8 documented systems need work after a repair. This vehicle is documented with Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (Continental 77GHz), Highway Driving Assist (HDA), Blind Spot Detection (BSD) - Left Rear Radar, and Blind Spot Detection (BSD) - Right Rear Radar. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2023 Genesis G90?

Yes. The 2023 Genesis G90 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 11256-08201. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2023 Genesis G90?

After windshield replacement on a 2023 Genesis G90, Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (Continental 77GHz), and Rear View Camera (RVC) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.

How long does a 2023 Genesis G90 module service take?

Most 2023 Genesis G90 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (3 ECU, 1 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.

Do you cover the 2023 Genesis G90 on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2023 Genesis G90. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2023 Genesis G90 programming?

Every programming, cloning, and calibration job on the 2023 Genesis G90 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Which modules on a 2023 Genesis G90 can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2023 Genesis G90. For this vehicle our database documents:

  • 3 engine control (ECU/PCM)
  • 2 transmission control (TCU/TCM)
  • 1 body control (BCM and related)
  • 1 ABS / brake control (EBCM)
  • 1 immobilizer / security
  • 1 key & fob
  • 2 instrument cluster (IPC)
  • 1 steering angle sensor (SAS)
  • 8 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2023 Genesis G90 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ADAS Module Part Numbers
99110-T4200, 99110-T4300, 99211-T4000
ECU / PCM Part Numbers
39110-T4200, 3.5T LAMBDA III TT 375HP, 409HP E-SC VARIANTS, ECM CAL CONTROLLED VIA SHARED RG3, RS4 PLATFORM HARDWARE - VERIFY EXACT ENGINE PN VIA GDS2
TCU / TCM Part Numbers
95440-J5
SRS / Airbag Module Part Numbers
11256-08201, 11254-06201, 13271-06001, 13395-08001
ABS / EBCM Part Numbers
58920-D2, CONTINENTAL ESC (G90 HI, RS4 GN PLATFORM)
Instrument Cluster (IPC) Part Numbers
94013-T4030, 94013-T4040
Transmission Control Module (TCM) Part Numbers
95440-J5

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

(945) 382-4065 Get a Quote

Shared module fitment

Vehicles sharing modules with the 2023 Genesis G90

These vehicles use one or more of the same replacement modules indexed for this vehicle.

Finish the repair

Need help finishing this repair?

Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.