VIN / Build Split
VIN pos 4-8 identifies model/engine/restraint. Chrysler WMI: 2C3 (Chrysler). Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2017 Chrysler Pacifica Supported Services
2017 Chrysler Pacifica
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform RU (Chrysler Pacifica, 1st Gen 2017+)
- CAN Architecture CAN-C (500 kbps HS-CAN) + CAN-IHS; OBD2 DLC Pin 6/14 CAN-C 500 kbps
- Security Chrysler RFHUB/SKREEM - 315 MHz rolling code; no OBD PIN extraction; AKL via wiTECH 2.0 + DealerConnect; max 8 keys
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2017 Chrysler Pacifica. On this vehicle we cover documented systems include Forward Camera (Monocular), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM), this RU (Chrysler Pacifica, 1st Gen 2017+) platform vehicle, Chrysler RFHUB/SKREEM (315 MHz rolling code) immobilizer support, OEM-gateway-subscription work handled on our side, Uconnect 4C infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
RU (Chrysler Pacifica, 1st Gen 2017+)
Production
2017-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
CAN-C (500 kbps HS-CAN) + CAN-IHS; OBD2 DLC Pin 6/14 CAN-C 500 kbps
YEAR-SPECIFIC NOTES
Infotainment
Uconnect 4C
Exact-year service summary for 2017 Chrysler Pacifica
ADAS coverage
This 2017 Chrysler Pacifica page documents 4 ADAS systems, including Forward Camera (Monocular), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and ParkSense Rear Ultrasonic Sensors.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Rear Bumper Repair or Replacement, Any Collision, and PCM or RFHUB Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 17 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
Security notes for this 2017 Chrysler Pacifica include gateway type: Stellantis Secure Gateway (SGW); bypass method: OEM wiTECH/authorized SGW access; subscription: Yes.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2017 Chrysler Pacifica using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
SafetyTec Group (optional): Forward Collision Warning, Lane Departure Warning, B - Available; Platform: RU (Chrysler Pacifica, 1st Gen 2017+) - Confirmed
Driver-assist suite
SafetyTec Group (optional): Forward Collision Warning, Lane Departure Warning, Blind Spot Detection, Rear Cross-Path Detection (Rear Cross Path Detection), ParkSense front/rear ultrasonic; no SGW on 2017
VIN and build split
VIN pos 4-8 identifies model/engine/restraint. Chrysler WMI: 2C3 (Chrysler). Position 4-5 = model. Position 10 = model year code.
Infotainment context
Uconnect 4C; Uconnect 4 (8.4" touchscreen); Apple CarPlay / Android Auto standard; no OTA on 2017
Network and access
CAN: CAN-C (500 kbps HS-CAN) + CAN-IHS; OBD2 DLC Pin 6/14 CAN-C 500 kbps; gateway: Stellantis Secure Gateway (SGW); gateway subscription: Yes
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Stellantis wiTECH 2.0
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Security gateway access required No practical workaround
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2017 Chrysler Pacifica. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
4 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
1 module documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
8 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
SafetyTec Group (optional): Forward Collision Warning, Lane Departure Warning, B
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: RU (Chrysler Pacifica, 1st Gen 2017+)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Chrysler Pacifica issues we resolve on this platform: Forward Camera (Monocular), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and ParkSense Rear Ultrasonic Sensors recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - RU (Chrysler Pacifica, 1st Gen 2017+) platform uses CAN-C (500 kbps HS-CAN) + CAN-IHS; OBD2 DLC Pin 6/14 CAN-C 500 kbps. Stellantis Secure Gateway (SGW) module faults requiring OEM subscription access for full read/write (handled on our side).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
SafetyTec Group (optional): Forward Collision Warning, Lane Departure Warning, Blind Spot Detection, Rear Cross-Path Detection (Rear Cross Path Detection), ParkSense front/rear ultrasonic; no SGW on 2017
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | ~68264740 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~68227620 L (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~68227621 R (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| ParkSense Rear Ultrasonic Sensors | Ultrasonic | Ultrasonic | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: FCW Forward Camera (SafetyTec Group)
Static camera calibration required via wiTECH after windshield R&R if SafetyTec Group equipped. Level surface, target board per wiTECH guided calibration. No SGW on 2017 - direct OBD access. Verify FCW DTC clear before return to customer.
Rear Bumper Repair or Replacement Affected: BSD Left/Right, RCPD, ParkSense Rear Sensors
BSD module initialization required via wiTECH if sensors disturbed. ParkSense sensors: DTC clear and functional verify. Road test BSD at 20+ mph.
Any Collision Affected: ORC, Forward Camera, BSD Sensors, all deployed restraints
Full module scan via wiTECH mandatory. ORC - if deployment DTC present, replace module (no crash clear). All ADAS modules scan for DTC. Do not clear DTC without physical inspection of all affected modules.
PCM or RFHUB Replacement Affected: PCM, RFHUB, all registered keys (erased on RFHUB replacement)
PROXI alignment required via wiTECH for PCM and RFHUB. If RFHUB replaced, all keys erased - all customer keys must be present for re-registration via DealerConnect. Max 8 keys. DealerConnect authorization required.
HV System Work (PHEV Only) Affected: BECM, PCM, HV battery, charging ECU
PHEV: disable HV system (orange cable caution, service plug removal) before any PCM or BECM work. wiTECH + DealerConnect required for PHEV-specific module programming. Authorized HV shop only for HV battery work.
Forward Camera Replacement
Camera module replacement requires full recalibration using wiTECH2.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using wiTECH2.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use wiTECH2 if applicable.
SRS Modules
Occupant Restraint Controller (ORC) 68453074AC
- Part number
- 68453074AC
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
ECU Modules
PCM - 3.6L Pentastar V6 (Gas) ~68416 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68416 (VERIFY VIA DEALERCONNECT)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Bosch ME17 / Continental
- Notes
- wiTECH 2.0 + Programming Port + DealerConnect for PCM flash and VIN tie. PROXI alignment required. 9-speed 948TE - TCM adaptive reset via wiTECH after TCM replacement. Battery SOC above 80% before programming.
PCM/BECM - 3.6L PHEV Hybrid ~68416 PCM
- Part number
- ~68416 PCM
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch ME17 + HV BECM
- Notes
- PHEV: dual system - PCM + Battery Energy Control Module (BECM). HV service disable required before any PCM or BECM work (orange HV cable caution). wiTECH 2.0 + DealerConnect for both modules. PHEV-specific calibration - do not use gas PCM part number. HV battery: 16 kWh Li-ion, 33-mile EV range - authorized HV shop only.
TCM - 948TE 9-Speed (Gas) ~68416 TCM (VERIFY VIA DEALERCONNECT)
- Part number
- ~68416 TCM (VERIFY VIA DEALERCONNECT)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental / ZF
- Notes
- wiTECH TCM programming + PROXI + adaptive reset after replacement. Shift quality relearn drive cycle required. No TCM on PHEV (e-CVT).
BCM Modules
Body Control Module (BCM) ~68347 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68347 (VERIFY VIA DEALERCONNECT)
- Security
- Rolling Code
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- wiTECH 2.0 + PROXI alignment required after BCM replacement. Controls door locks, lighting, power sliding doors, power liftgate, Smart Entry. All variant/option codes must be configured. VIN tie via wiTECH. No SGW on 2017 - direct OBD access.
TIPM (Totally Integrated Power Module) ~68386 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68386 (VERIFY VIA DEALERCONNECT)
- Security
- Rolling Code
- Coding required
- Yes
- Cloning supported
- No
- Notes
- wiTECH PROXI alignment required after TIPM replacement. Controls all fused/relay circuits. DealerConnect authorization required.
RFHUB (Remote Start / Smart Key Module) ~68512 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68512 (VERIFY VIA DEALERCONNECT)
- Security
- Rolling Code
- Coding required
- Yes
- Cloning supported
- No
- Notes
- RFHUB replacement requires wiTECH 2.0 + DealerConnect authorization. All customer keys must be present for re-registration. Max 8 keys. No OBD PIN extraction. PCM PROXI alignment mandatory after any RFHUB or PCM replacement.
TCU / TCM Transmission Modules
TCU - 948TE 9-Speed Auto 68RFE, P68RFE
- Part number
- 68RFE, P68RFE
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental TC1797
- Notes
- ZF 948TE transmission. Requires SGW bypass for programming. ATF+4 fluid. TCM adaptation required after installation. VIN programming mandatory.
ABS / Brake Modules
ABS/ESC Module (Continental/Bosch) ~68412 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68412 (VERIFY VIA DEALERCONNECT)
- Cloning supported
- No
- Notes
- wiTECH ABS/ESC initialization after replacement. Brake bleed required if hydraulic unit replaced - wiTECH automated bleed cycle. Steering angle sensor (SAS) zero-point calibration via wiTECH after replacement or any alignment work.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 68345182AA
- Part number
- 68345182AA
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 68345183AA
- Part number
- 68345183AA
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Uconnect 4 (8.4-inch) Head Unit ~68375 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68375 (VERIFY VIA DEALERCONNECT)
- Notes
- wiTECH programming + variant configuration after replacement. Apple CarPlay / Android Auto standard. Verify STARLINK connected services pairing post-install.
Power Sliding Door Module - Left
- Notes
- wiTECH PSD initialization after replacement. Adjust travel limits. Verify pinch protection and obstacle detection. Standard on Touring+ trims.
Power Sliding Door Module - Right
- Notes
- Same procedure as left PSD. Both sides must be initialized independently via wiTECH.
Power Liftgate Module
- Notes
- wiTECH initialization after replacement. Set height limit and speed via wiTECH. Verify obstacle detection operation post-programming.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- High-strength steel unibody; minivan (FWD)
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- CAN-C (500 kbps HS-CAN) + CAN-IHS; OBD2 DLC Pin 6/14 CAN-C 500 kbps
- Infotainment
- Uconnect 4 (8.4" touchscreen); Apple CarPlay / Android Auto standard; no OTA on 2017
- OTA Capable
- No
- Gateway Type
- Stellantis Secure Gateway (SGW)
- Gateway Bypass Method
- OEM wiTECH/authorized SGW access
- Infotainment Name
- Uconnect 4C
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2017 Chrysler Pacifica?
ADAS calibration pricing for a 2017 Chrysler Pacifica depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and ParkSense Rear Ultrasonic Sensors. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2017 Chrysler Pacifica?
Yes. The 2017 Chrysler Pacifica uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 68453074AC. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2017 Chrysler Pacifica?
After windshield replacement on a 2017 Chrysler Pacifica, Forward Camera (Monocular) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2017 Chrysler Pacifica module service take?
Most 2017 Chrysler Pacifica onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 17 programmable modules documented in our database (3 ECU, 3 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2017 Chrysler Pacifica on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. The 2017 Chrysler Pacifica uses Stellantis Secure Gateway (SGW) that requires an OEM subscription for full programming - we handle that on our side, no separate sign-up needed. Quote the work and we will confirm the active service path for the 2017 Chrysler Pacifica. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2017 Chrysler Pacifica programming?
Every programming, cloning, and calibration job on the 2017 Chrysler Pacifica is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2017 Chrysler Pacifica can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2017 Chrysler Pacifica. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 4 ADAS module
Infotainment on this platform: Uconnect 4C. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2017 Chrysler Pacifica covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 68349507AB, 68349508AB
- ECU / PCM Part Numbers
- 68357916AA, 68357917AA
- BCM / Body Module Part Numbers
- ~68347 (VERIFY VIA DEALERCONNECT), ~68386 (VERIFY VIA DEALERCONNECT), ~68512 (VERIFY VIA DEALERCONNECT)
- TCU / TCM Part Numbers
- 68RFE, P68RFE
- SRS / Airbag Module Part Numbers
- 68453074AC
- ABS / EBCM Part Numbers
- 68356019AA, 68356020AA
- Instrument Cluster (IPC) Part Numbers
- 68345182AA, 68345183AA
- Transmission Control Module (TCM) Part Numbers
- 68RFE, P68RFE
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2017 Chrysler Pacifica
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
wiTECH 2.0 Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.