Expert ADAS calibration, module programming, and diagnostic recovery for the 2010 Chevrolet Tahoe. On this vehicle we cover documented systems include Rear View Camera, Forward Collision Warning / AEB, and Lane Departure Warning, this GMT900 (3rd Gen, 2007-2014) platform vehicle, PK3/PK3+ / PEPS immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
GMT900 (3rd Gen, 2007-2014)
Production
2000-present
Trim Levels
Standard trim configurations for 2010 Chevrolet Tahoe; verify trim-specific options before ordering modules.
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2010 Chevrolet Tahoe using the documented module data on this page.
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC)20896852
PART
20896852
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
CODING
Yes
NOTES
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
CODING
Yes
NOTES
cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
OnStar Module84
PART
84
NOTES
GDS2 init. Subscription required for OTA, Super Cruise, remote services.
Remote StartRPO UF8, AP9
PART
RPO UF8, AP9
NOTES
BCM GDS2 enable.
Power Liftgate
NOTES
GDS2 init. Height set via IOR.
Trailer Brake Controller23360
PART
23360
NOTES
GDS2 config. Gain via IOR.
GATEWAY / SECURITY MODULES
Gateway / Security Modules
Central Gateway Module
MFG
Renesas
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
D70F3585
NOTES
Compatibility label: Chevrolet. Air conditioning Notes: Read/Write
Chevrolet MyLink (7" touchscreen); OnStar; Bluetooth; USB/Aux
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed Reviewed coverage: 2010 - 4.8L V8 16v (LY2), 5.3L V8 16v (LY5), 5.3L V8 EcoTec III 16v MHEV (L8B), 6.0L V8 16v MHEV (LZ1), 6.2L V8 16v (L92). Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2010 Chevrolet Tahoe?
ADAS calibration pricing for a 2010 Chevrolet Tahoe depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Rear View Camera, Forward Collision Warning / AEB, and Lane Departure Warning. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2010 Chevrolet Tahoe?
Yes. The 2010 Chevrolet Tahoe uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 84308909. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2010 Chevrolet Tahoe?
After windshield replacement on a 2010 Chevrolet Tahoe, Rear View Camera, Forward Collision Warning / AEB, and Lane Departure Warning rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2010 Chevrolet Tahoe module service take?
Most 2010 Chevrolet Tahoe onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 22 programmable modules documented in our database (1 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2010 Chevrolet Tahoe on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2010 Chevrolet Tahoe. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2010 Chevrolet Tahoe programming?
Every programming, cloning, and calibration job on the 2010 Chevrolet Tahoe is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2010 Chevrolet Tahoe with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2010 Chevrolet Tahoe. Immobilizer generation on this platform: PK3/PK3+ / PEPS. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2010 Chevrolet Tahoe can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2010 Chevrolet Tahoe. For this vehicle our database documents:
1 engine control (ECU/PCM)
2 transmission control (TCU/TCM)
1 body control (BCM and related)
3 ABS / brake control (EBCM)
1 immobilizer / security
2 key & fob
2 instrument cluster (IPC)
2 steering angle sensor (SAS)
3 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2010 Chevrolet Tahoe covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.