3,200+ Vehicles Supported

1-Year Unlimited Guarantee

DFW Mobile Service

DFW Serving Dallas / Fort Worth

2019 Audi Q5 Supported Services

2019 Audi Q5

ADAS calibration, module programming, and security relearns

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Technical snapshot

Platform MLB-Evo-FY
CAN Architecture CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems
Security Audi Kessy Gen 3+ AES encryption - ODIS + factory authorization required; no OBD pin extraction

Get a Quote See Supported Modules

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 Audi Q5. On this vehicle we cover documented systems include Pre Sense Front / Pre Sense City, Active Lane Assist, and Adaptive Cruise Control (ACC), this MLB-Evo-FY platform vehicle, IMMO5（15- online） immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.

Platform

MLB-Evo-FY

Production

2009-present

Trim Levels

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Drivetrain

AWD

Engine

CAN Speed

CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems

YEAR-SPECIFIC NOTES

VIN / Build Split

VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.

SERVICE SNAPSHOT

Exact-year service summary for 2019 Audi Q5

ADAS coverage

This 2019 Audi Q5 page documents 5 ADAS systems, including Pre Sense Front / Pre Sense City, Active Lane Assist, Adaptive Cruise Control (ACC), and Blind Spot Detection (BSD) / Side Assist.

View ADAS data

Calibration triggers

Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Use the ADAS tab for the full trigger list.

View triggers

Programmable modules

This page indexes 14 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

This page includes 5 gateway, immobilizer, or key-security records for this 2019 Audi Q5.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2019 Audi Q5 using the documented systems and module data on this page.

Choose a section

EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind - Available; Immobilizer: IMMO5（15- online） - Standard; Platform: MLB-Evo-FY - Confirmed

Driver-assist suite

Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind Spot Detection Side Assist (optional)

VIN and build split

VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.

Infotainment context

MMI Navigation Plus; Virtual Cockpit (optional/standard by trim)

Network and access

CAN: CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

VW ODIS-S / ODIS-E / Audi VAS 6154

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

OEM subscription required

Make-level OEM tool map plus exact-year gateway and ADAS fields.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Tool subscription required

Service-level scanner-vendor source packet plus exact-year ADAS records.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Bench programmer source packet plus exact-year module/security records.

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2019 Audi Q5. Counts reflect modules our techs have programmed or calibrated on this exact platform.

ADAS Calibration

5 modules documented

Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.

Open ADAS tab

Engine / ECU Programming

2 modules documented

Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.

Open Modules tab

BCM / Body Programming

1 module documented

Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.

Open Modules tab

Gateway / Security Access

3 modules documented

Secure gateway module identification, bypass workflow and security-access planning before programming.

Open Security tab

TCU / Transmission

3 modules documented

Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.

Open Modules tab

SRS / Airbag Reset

2 modules documented

Crash-data clear, hard-code reset and replacement airbag module configuration.

Open Modules tab

ABS / Brake Module

1 module documented

ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.

Open Modules tab

Key Security & Immobilizer

1 module documented

Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.

Open Security tab

IPC, SAS & Other Modules

2 modules documented

Instrument cluster cloning, steering angle sensor calibration and other supporting modules.

Open Modules tab

Connectivity & Accessories

3 modules documented

Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.

Open Modules tab

Recalibration Triggers

8 modules documented

Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.

Open ADAS tab

Need something not listed? Most undocumented modules can still be programmed.

Get a Quote

Feature availability 3

Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

Immobilizer: IMMO5（15- online）

Standard

Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.

Platform: MLB-Evo-FY

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Audi Q5 issues we resolve on this platform: Pre Sense Front / Pre Sense City, Active Lane Assist, Adaptive Cruise Control (ACC), and Blind Spot Detection (BSD) / Side Assist recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - MLB-Evo-FY platform uses CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems. Key programming and immobilizer faults - IMMO5（15- online） immobilizer; all-keys-lost supported.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind Spot Detection Side Assist (optional)

Scroll for part numbers and Details

System	Type	Category	Cal. Type	Supported	Part #
Pre Sense Front / Pre Sense City	Front Camera + Radar Fusion	Fused	Static	YES	8W0-907-107-X
Active Lane Assist	Forward Camera	Camera	Static	YES	8W0-907-217-X
Adaptive Cruise Control (ACC)	Front Radar	Radar	Static	YES	8W0-907-561-X
Blind Spot Detection (BSD) / Side Assist	Side Radar	Radar	Static + Dynamic	YES	-
360-Degree Surround View Camera	Surround Camera	Camera	Static	YES	OPTIONAL - 4-CAMERA SYSTEM

WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

Windshield Replacement Affected: Front Camera (Active Lane Assist), Pre Sense Front, Pre Sense City, AEB, Adaptive Cruise (camera input)

ODIS-guided static calibration required after windshield R&R. zFAS ADAS ECU manages camera and radar fusion. ODIS work order must be created and SVM coding applied. Use only approved OEM-equivalent glass - aftermarket glass rake angle variation can cause calibration failure. Do not deliver vehicle until calibration passes.

Front Bumper Repair or Replacement Affected: Front Radar (ACC, Pre Sense Front, AEB), front ultrasonic park sensors

Front radar (77GHz) static calibration required via ODIS after any front bumper work or radar module replacement. Vehicle must be at curb weight on a level surface. Inspect radar mounting bracket for deformation. Park sensors require ODIS adaptation if replaced.

Rear Bumper Repair or Replacement Affected: BSD Side Assist (if equipped), rear ultrasonic park sensors

Rear bumper corner side radar modules require ODIS static calibration if displaced or replaced. Confirm BSD equipment via ODIS options. Rear park sensor adaptation required via ODIS if sensors replaced.

Any Collision Affected: ACU (SRS), zFAS ADAS ECU, front radar, front camera, all deployed airbag and pretensioner components

Full ODIS scan mandatory across all control modules. ACU is replace-only in most cases - do not attempt crash data reset without ODIS confirmation. All deployed airbags and pretensioners must be replaced. ADAS recalibration required after any structural or bumper repair. SVM coding required on all replaced modules.

Any Module Replacement Affected: All ODIS-coded modules - CEM, ECM, ACU, ABS, ADAS ECU, infotainment, cluster

ODIS SVM coding required for all module replacements. Factory authorization required for CEM, ECM, and AKL procedures. Aftermarket tools cannot perform SVM coding. Battery SOC must be adequate before any programming session.

Mirror Replacement Affected: 360-degree surround camera (if equipped), BSD side assist

If surround view cameras are integrated in mirrors, ODIS-guided static calibration with calibration targets required. BSD mirror warning LEDs - confirm function after reinstall.

Forward Radar Replacement

Radar module replacement requires alignment/calibration using ODIS-S.

BSM Sensor Replacement

Blind spot monitoring sensor replacement requires calibration using ODIS-S.

SRS MODULES

SRS Modules

Airbag Control Unit (ACU) 8R0959655B

PART: 8R0959655B
LOCATION: Under center console
MFG: Continental
NOTES: Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.

Airbag Control Unit (ACU) 8R0959655G

PART: 8R0959655G
LOCATION: Under center console
MFG: Continental
NOTES: Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.

ECU MODULES

ECU Modules

ECM - 2.0L EA888 TFSI (45 TFSI) 8W0-906-259-X

PART: 8W0-906-259-X
PROTOCOL: ODIS SVM
CODING: Yes
CLONE: No
CHIP/MCU: Bosch MED17 / Continental SID
NOTES: ODIS + factory authorization required. SVM for adaptation. No standalone flash tools compatible. Audi Genuine Parts or authorized remanufactured ECM required. Verify part suffix via ODIS VIN and engine code before ordering. Battery SOC must be sufficient before programming session.

ECM - 3.0L EA839 V6 (SQ5 TFSI / SQ5 TDI) 8W0-907-115-X

PART: 8W0-907-115-X
PROTOCOL: ODIS SVM
CODING: Yes
CLONE: No
CHIP/MCU: Bosch MED17 / Continental SID
NOTES: ODIS + factory authorization required. SVM for adaptation. SQ5 TFSI and SQ5 TDI use different suffixes - verify via ODIS VIN and engine code. No aftermarket tools capable of full programming. Audi Genuine Parts or authorized remanufactured ECM required.

BCM MODULES

BCM Modules

Central Electronic Module (CEM) 8W0-937-084-X

PART: 8W0-937-084-X
SECURITY: AES Immobilizer
CODING: Yes
CLONE: No
NOTES: CEM contains immobilizer data and gateway ECU in same network. ODIS SVM required for all module coding - no standalone flash tools. Factory authorization required. New CEM must be coded to VIN via ODIS. Aftermarket tools cannot code this module.

TCU / TCM TRANSMISSION MODULES

TCU / TCM Transmission Modules

TCU - 0D9 7-Speed S Tronic 0D9927769

PART: 0D9927769
PROTOCOL: OBD
CODING: Yes
CLONE: Yes
CHIP/MCU: Continental Temic
NOTES: Requires VCDS/VAG-COM coding, adaptation procedure via measuring blocks, ATF G052182A2, clutch learning required

TCU - 0B5 7-Speed S Tronic 0B5927769

PART: 0B5927769
PROTOCOL: OBD
CODING: Yes
CLONE: Yes
CHIP/MCU: Continental Temic
NOTES: Requires VCDS coding, clutch adaptation via basic settings, ATF G052182A2, temperature monitoring critical

TCU - 0CK 8-Speed Tiptronic 0CK927769

PART: 0CK927769
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: ZF Continental
NOTES: ZF 8HP transmission, requires dealer programming via ODIS, adaptation procedure mandatory, ATF G060162A2

ABS / BRAKE MODULES

ABS / Brake Modules

ABS/ESC Module 8W0-614-517-X

PART: 8W0-614-517-X
CLONE: No
NOTES: ODIS required for adaptation and coding after replacement. Brake fluid bleed required after ABS module replacement - use ODIS automated bleed cycle. Verify part suffix via ODIS VIN before ordering. No aftermarket tool support for coding.

OTHER MODULES (IPC, SAS)

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) 80A 920 750 B

PART: 80A 920 750 B
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Steering Angle Sensor (SAS)

CODING: Yes
NOTES: INTEGRATED (J527 clock spring/coil)

CONNECTIVITY & ACCESSORIES

Connectivity & Accessories

Virtual Cockpit (Digital Instrument Cluster)

NOTES: ODIS SVM coding required after replacement. VIN-coded. Standard on Sport and Prestige trims.

Audi Phone Box / Wireless Charging

NOTES: ODIS coding required if module replaced.

GATEWAY / SECURITY MODULES

Gateway / Security Modules

Central Gateway Module

MFG: STMicroelectronics
SECURITY: VIN-locked (UDS)
VIN LOCKED: Yes
CODING: Yes
CHIP/MCU: ST10F269
NOTES: AMP Notes: Read/Write

Central Gateway Module

MFG: Renesas
SECURITY: VIN-locked (UDS)
VIN LOCKED: Yes
CODING: Yes
CHIP/MCU: D70F3380
NOTES: Compatibility label: A4/A5/Q5. BCM Notes: Read/Write

Central Gateway Module

MFG: Renesas
SECURITY: VIN-locked (UDS)
VIN LOCKED: Yes
CODING: Yes
CHIP/MCU: D70F3548 2018
NOTES: Compatibility label: A4L. Headlight modules Notes: Read/Write

KEY SECURITY & IMMOBILIZER

Key Security & Immobilizer

System IMMO5（15- online）
Add Key Yes
All Keys Lost Yes

Audi Kessy Gen 3+ AES encryption - ODIS + factory authorization required; no OBD pin extraction

IMMOBILIZER MODULES

Immobilizer Modules

Audi Kessy Gen 3+ (Keyless Entry Start System) INTEGRATED IN CEM (8W0-937-084-X)

PART: INTEGRATED IN CEM (8W0-937-084-X)
SECURITY: AES KESSY
NOTES: AES encryption - no OBD pin extraction possible. ODIS dealer-auth required for all key programming and AKL (All Keys Lost). Maximum 8 keys per vehicle. Factory authorization mandatory. Aftermarket immobilizer tools are incompatible with Kessy Gen 3+.

KEY & FOB TYPES

Key & Fob Types

Proximity Smart Key Fob 8W0-837-220-X

PART: 8W0-837-220-X
NOTES: AES-encrypted Kessy Gen 3+. All key programming via ODIS with factory authorization only. Minimum 2 working keys required for add-key procedure. AKL requires ODIS + Audi dealer security authorization - no aftermarket bypass. Max 8 keys per vehicle.

Replacement Notes

Yes

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction: MLB Evo unibody; steel and aluminum composite construction
OBD Protocol: ISO 15765-4 CAN; UDS (ISO 14229); ODIS proprietary extensions
CAN Architecture: CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems
Infotainment: MMI Navigation Plus; Virtual Cockpit (optional/standard by trim)
OTA Capable: No
ECU/TCM Unlocking: Contact us
ECU/TCM Flashing: Confirmed
Reviewed coverage: 2019 - 2.0L 35 TDI CR (DEUA), 2.0L 40 TDI CR (DETA), 2.0L 40 TDI CR (DTPA), 2.0L 40 TFSI (DKNA), 2.0L 45 TFSI MHEV (DMTA), 2.0L 55 TFSI (DLGA), 2.0L MHEV (40 TFSI), 2.0L TDI CR (DETA), 2.0L TFSI quattro (DAXC), 3.0L 45 TDI CR (DCPC).
Confirm the exact engine, ECU, and any prerequisite access method before service.

FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2019 Audi Q5?

ADAS calibration pricing for a 2019 Audi Q5 depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Pre Sense Front / Pre Sense City, Active Lane Assist, Adaptive Cruise Control (ACC), Blind Spot Detection (BSD) / Side Assist, and 360-Degree Surround View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2019 Audi Q5?

Yes. The 2019 Audi Q5 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 8R0959655B. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2019 Audi Q5?

After windshield replacement on a 2019 Audi Q5, Active Lane Assist and 360-Degree Surround View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.

How long does a 2019 Audi Q5 module service take?

Most 2019 Audi Q5 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 16 programmable modules documented in our database (2 ECU, 1 BCM, 3 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.

Do you cover the 2019 Audi Q5 on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2019 Audi Q5. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2019 Audi Q5 programming?

Every programming, cloning, and calibration job on the 2019 Audi Q5 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Can you program a 2019 Audi Q5 with no working keys (all-keys-lost)?

Yes - all-keys-lost is supported on the 2019 Audi Q5. Immobilizer generation on this platform: IMMO5（15- online）. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.

Which modules on a 2019 Audi Q5 can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2019 Audi Q5. For this vehicle our database documents:

2 engine control (ECU/PCM)
3 transmission control (TCU/TCM)
1 body control (BCM and related)
1 ABS / brake control (EBCM)
1 immobilizer / security
1 key & fob
1 instrument cluster (IPC)
1 steering angle sensor (SAS)
5 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

OTHER MODEL YEARS

2026 2025 2024 2023 2022 2021 2020 2018 2017 2016 2019

OTHER AUDI MODELS

A4 A6 Q7 Q8 E-Tron Q4-E-Tron Q3 E-Tron-GT

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2019 Audi Q5 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ADAS Module Part Numbers: 80A 907 107 B
ECU / PCM Part Numbers: 80A 907 115 D, 80A 907 115 E
BCM / Body Module Part Numbers: 8W0-937-084-X
TCU / TCM Part Numbers: 0D9927769, 0B5927769, 0CK927769
SRS / Airbag Module Part Numbers: 8R0959655B, 8R0959655G
ABS / EBCM Part Numbers: 80A 614 517 B
Instrument Cluster (IPC) Part Numbers: 80A 920 750 B
Transmission Control Module (TCM) Part Numbers: 0D9927769, 0B5927769, 0CK927769
Steering Angle Sensor (SAS) Part Numbers: INTEGRATED (J527 CLOCK SPRING

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Send VIN & ask (945) 382-4065

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

Get a Quote (945) 382-4065

(945) 382-4065 Get a Quote

Shared module fitment

Vehicles sharing modules with the 2019 Audi Q5

These vehicles use one or more of the same replacement modules indexed for this vehicle.

2017 Audi A4 PCM 2018 Audi A4 PCM 2019 Audi A4 PCM 2015 Audi Q5 PCM 2016 Audi Q5 PCM 2017 Audi Q5 PCM