Choose a make, model and year, or start with a VIN.
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Choose a service to start your quote.
This 2017 Audi A6 page documents 6 ADAS systems, including Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Audi Pre-Sense Plus - Front Radar (77GHz), Adaptive Cruise Assist (ACC) - Traffic Jam Assist, and Audi Side Assist (BSM) / Rear Cross-Traffic Alert.
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Mirror Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 16 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 2 gateway, immobilizer, or key-security records for this 2017 Audi A6.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2017 Audi A6 using the documented systems and module data on this page.
Choose a sectionVIN and build details determine exact service eligibility. A missing record does not mean we cannot help; ask about your vehicle.
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
Pre Sense Front (dual camera), Active Lane Assist, Adaptive Cruise Control Predi - Available; Platform: MLB-Evo-C8 - Confirmed
Pre Sense Front (dual camera), Active Lane Assist, Adaptive Cruise Control Predictive Efficiency Assist, AI Traffic Jam Assist Level 2 (Prestige), Blind Spot Detection Side Assist with Exit Warning, 360 Surround View
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
MMI Touch Response dual touchscreen MIB3 (upper 10.1-inch + lower 8.6-inch); Virtual Cockpit Plus 12.3-inch TFT
CAN: CAN (powertrain + chassis); FlexRay (zFAS Gen2 ADAS); MOST150 (infotainment); LIN (body subsystems); 48V power bus (MHEV)
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
VW ODIS-S / ODIS-E / Audi VAS 6154
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
Documented module coverage for the 2017 Audi A6. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabPowertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBody control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTransmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabCrash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabInstrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabService events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Verify platform code matches when cross-referencing part numbers across model years.
Common Audi A6 issues we resolve on this platform: Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Audi Pre-Sense Plus - Front Radar (77GHz), Adaptive Cruise Assist (ACC) - Traffic Jam Assist, and Audi Side Assist (BSM) / Rear Cross-Traffic Alert recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Audi A6 C7 (US model-year scope) platform uses CAN (powertrain + chassis); FlexRay (zFAS Gen2 ADAS); MOST150 (infotainment); LIN (body subsystems); 48V power bus (MHEV).
Pre Sense Front (dual camera), Active Lane Assist, Adaptive Cruise Control Predictive Efficiency Assist, AI Traffic Jam Assist Level 2 (Prestige), Blind Spot Detection Side Assist with Exit Warning, 360 Surround View
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Audi Pre-Sense Plus - Forward Camera (Pre-Sense City) | Forward Camera | Camera | Static | YES | 4G0-907-217-C | |
| Audi Pre-Sense Plus - Front Radar (77GHz) | Front Radar | Radar | Static | YES | 4G0-907-561-A | |
| Adaptive Cruise Assist (ACC) - Traffic Jam Assist | Front Radar | Radar | Static | YES | 4G0-907-561-A | |
| Audi Side Assist (BSM) / Rear Cross-Traffic Alert | Side Radar | Radar | Static + Dynamic | YES | 4G0-907-566-B (L), 4G0-907-566-C (R) | |
| Lane Departure Warning / Active Lane Assist | Forward Camera | Camera | Static | YES | 4G0-907-217-C | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationBoth C8 dual front cameras must pass ODIS static target calibration. ODIS work order first, SVM coding after pass. OEM glass only.
ARS510 static calibration via ODIS. Park sensor adaptation if replaced.
Mirror-integrated side cameras require ODIS static calibration with targets. All four cameras must pass.
Full ODIS scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration. SVM on all replaced modules.
ODIS SVM required. Factory authorization for J519, ECM, J518, AKL. Battery SOC adequate.
Camera module replacement requires full recalibration using ODIS-S.
Radar module replacement requires alignment/calibration using ODIS-S.
BSD radar alignment required after rear bumper R&R. Use ODIS-S.
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ADAS calibration pricing for a 2017 Audi A6 depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Audi Pre-Sense Plus - Front Radar (77GHz), Adaptive Cruise Assist (ACC) - Traffic Jam Assist, Audi Side Assist (BSM) / Rear Cross-Traffic Alert, and Lane Departure Warning / Active Lane Assist. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Yes. The 2017 Audi A6 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 4G0-959-655-A. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
After windshield replacement on a 2017 Audi A6, Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Lane Departure Warning / Active Lane Assist, and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
Most 2017 Audi A6 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 16 programmable modules documented in our database (1 ECU, 4 BCM, 4 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2017 Audi A6. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2017 Audi A6 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
We program, clone, repair, or replace the full programmable-module stack on a 2017 Audi A6. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2017 Audi A6 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Matching catalog references
These pages list a matching part reference in the same module category. This does not confirm interchangeability. Verify the complete part number, suffix, VIN and build before selecting a replacement.
Factory diagnostic software is available. We confirm the appropriate software and supported procedure for your vehicle.
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible work.