VIN / Build Split
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2013 Audi A6 Supported Services
2013 Audi A6
ADAS, Module Repair & Programming
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
- Platform C7 (4th Gen, 2012-2018)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Audi Megamos Crypto ID48 (3DES encrypted transponder, PCF7947); HU66 high-security blade; component protection via ODIS; AKL requires ODIS + Audi/VW Group dealer authorization + component release
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2013 Audi A6. On this vehicle we cover documented systems include Rear View Camera (RVC), Lane Assist - Forward Camera (Monocular), and Side Assist - Rear Lateral Radar (L/R), this C7 (4th Gen, 2012-2018) platform vehicle, MQB/MLB IMMO immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
C7 (4th Gen, 2012-2018)
Production
2005-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES
Exact-year service summary for 2013 Audi A6
ADAS coverage
This 2013 Audi A6 page documents 3 ADAS systems, including Rear View Camera (RVC), Lane Assist - Forward Camera (Monocular), and Side Assist - Rear Lateral Radar (L/R).
View ADAS dataCalibration triggers
Documented calibration triggers include ECM Replacement, ABS/ESC Module Replacement, Windshield Replacement, and Forward Camera Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 14 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 6 gateway, immobilizer, or key-security records for this 2013 Audi A6.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2013 Audi A6 using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Immobilizer: MQB/MLB IMMO - Standard; Platform: C7 (4th Gen, 2012-2018) - Confirmed
Driver-assist suite
No standard ADAS suite - pre-Pre Sense generation. Optional Audi Pre Sense Front and Adaptive Cruise Control on upper trims.
VIN and build split
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
Infotainment context
Audi MMI 3G+ (7" retractable display); Bluetooth; USB; SD card; Google Earth navigation
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Choose a section to view data
Feature availability 2
Immobilizer: MQB/MLB IMMO
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: C7 (4th Gen, 2012-2018)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Audi A6 issues we resolve on this platform: Rear View Camera (RVC), Lane Assist - Forward Camera (Monocular), and Side Assist - Rear Lateral Radar (L/R) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - C7 (4th Gen, 2012-2018) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - MQB/MLB IMMO immobilizer; all-keys-lost supported.
Documented for the C7 - includes this 2013 model year. Open the full coverage on the generation guide.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2013 Audi A6?
ADAS calibration pricing for a 2013 Audi A6 depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Rear View Camera (RVC), Lane Assist - Forward Camera (Monocular), and Side Assist - Rear Lateral Radar (L/R). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs and we return a number within 4 hours.
Can you reset the airbag light on a 2013 Audi A6?
Yes. The 2013 Audi A6 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 4G0-959-655-A. Bench-only or in-vehicle - both paths are supported. Send the part number and a description of what triggered the light, and we will provide a quote and ETA.
What is needed after replacing the windshield on a 2013 Audi A6?
After windshield replacement on a 2013 Audi A6, Rear View Camera (RVC) and Lane Assist - Forward Camera (Monocular) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site (DFW Metroplex) with OE target fixtures or via mail-in for the front camera/radar module.
How long does a 2013 Audi A6 module service take?
Most 2013 Audi A6 jobs complete same-day once the vehicle or module arrives. This vehicle has roughly 17 programmable modules documented in our database (1 ECU, 1 BCM, 3 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Module-bench work (ECU clones, BCM reprograms, SRS resets) ships back inside 1-3 business days including return shipping. ADAS calibration is on-site for DFW or mail-in for the front module.
Do you cover the 2013 Audi A6 on-site, or is this mail-in only?
Both. We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding) and a mail-in bench for module-only jobs (ECU cloning, BCM repair, SRS reset, TCU clone). Quote the work and we will tell you which path is right for the 2013 Audi A6.
What kind of warranty do you offer on 2013 Audi A6 programming?
Every programming, cloning, and calibration job on the 2013 Audi A6 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2013 Audi A6 with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2013 Audi A6. Immobilizer generation on this platform: MQB/MLB IMMO. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2013 Audi A6 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2013 Audi A6. For this vehicle our database documents:
- 1 engine control (ECU/PCM)
- 3 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 3 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing for your specific vehicle within 4 hours.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2013 Audi A6
These vehicles use one or more of the same replacement modules indexed for this vehicle.