VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2026 Toyota Venza Supported Services
2026 Toyota Venza
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform TNGA-K (AV10, 2nd Gen Venza)
- CAN Architecture Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
- Security Toyota Smart Entry - AES-128 DST-AES transponder; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys; 315 MHz RF (US market)
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2026 Toyota Venza. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this TNGA-K (AV10, 2nd Gen Venza) platform vehicle, Toyota Smart Key / Transponder immobilizer support, Toyota Audio Multimedia infotainment programming. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
TNGA-K (AV10, 2nd Gen Venza)
Production
2021-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
AWD
Engine
-
CAN Speed
Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
YEAR-SPECIFIC NOTES
Infotainment
Toyota Audio Multimedia
Exact-year service summary for 2026 Toyota Venza
ADAS coverage
This 2026 Toyota Venza page documents 8 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 23 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2026 Toyota Venza.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2026 Toyota Venza using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Toyota Safety Sense 2.5+ (Toyota Safety Sense 2.5 (TSS 2.5)+): Pre-Collision Sys - Available; Immobilizer: Toyota Smart Key / Transponder - Standard; Platform: TNGA-K (AV10, 2nd Gen Venza) - Confirmed
Driver-assist suite
Toyota Safety Sense 2.5+ (Toyota Safety Sense 2.5 (TSS 2.5)+): Pre-Collision System with Intersection Support, Enhanced Lane Departure Alert/Lane Tracing Assist, Proactive Driving Assist, Lane Change Assist, Emergency Steering Assist, Automatic High Beams
VIN and build split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Infotainment context
Toyota Audio Multimedia; Toyota Audio Multimedia 12.3" standard (all trims); Wireless Apple CarPlay; Wireless Android Auto; Toyota Connected Services
Network and access
CAN: Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2026 Toyota Venza. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
8 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
3 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
5 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
11 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
Toyota Safety Sense 2.5+ (Toyota Safety Sense 2.5 (TSS 2.5)+): Pre-Collision Sys
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Immobilizer: Toyota Smart Key / Transponder
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: TNGA-K (AV10, 2nd Gen Venza)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Toyota Venza issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - TNGA-K (AV10, 2nd Gen Venza) platform uses Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps. Key programming and immobilizer faults - Toyota Smart Key / Transponder immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Toyota Safety Sense 2.5+ (Toyota Safety Sense 2.5 (TSS 2.5)+): Pre-Collision System with Intersection Support, Enhanced Lane Departure Alert/Lane Tracing Assist, Proactive Driving Assist, Lane Change Assist, Emergency Steering Assist, Automatic High Beams
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | ~86790-48180 (VERIFY 2024 SUFFIX VIA TIS) | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | ~88210-48100 (VERIFY 2024 SUFFIX VIA TIS) | |
| Blind Spot Monitor Sensor - Left (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~88162-48020 (VERIFY 2024 SUFFIX VIA TIS) | |
| Blind Spot Monitor Sensor - Right (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~88161-48020 (VERIFY 2024 SUFFIX VIA TIS) | |
| Rear Cross Traffic Alert (RCTA) | Side Radar | Radar | None | YES | - | |
| Proactive Driving Assist (PDA) | Fused (Radar + Camera) | Fused | Static | YES | - | |
| Automatic High Beams (AHB) | Forward Camera | Camera | Static | YES | (INTEGRATED TSS 2.5 | |
| Rear View Camera | Rear Camera | Camera | Static | YES | ~86790-48020 (VERIFY 2024 SUFFIX VIA TIS) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: TSS 2.5+ Forward Camera (PCS, LDA, LTA, PDA, ESA, LCA, AHB, RCC)
Static camera calibration via Techstream. 3.0 m target on level surface. AV10 TSS 2.5+ camera is vehicle-specific. Confirm 2024 part availability via TIS before quoting repair. Clear DTC before road test.
Front Bumper Repair or Replacement Affected: TSS 2.5+ Forward Radar
Radar Techstream initialization. Level surface. Pair with camera calibration when both disturbed. Confirm 2024 radar part availability via TIS.
Rear Bumper Repair or Replacement Affected: BSM Sensors, RCTA
BSM initialization via Techstream. Road verify at 20+ mph.
Any Collision Affected: SRS ECU, ADAS sensors, deployed systems
Full Techstream scan. SRS: replace if DTC 51-xx. Final Venza year - check all replacement parts via TIS before committing to repair timeline.
ECM or HV ECU Replacement Affected: ECM, MG ECU, HV Battery ECU, Immobilizer
HV service plug out. Techstream VIN registration, IMMO coding, injector compensation, resolver calibration. Verify 2024 part suffixes via TIS.
Smart Key ECU Replacement Affected: All registered keys
All keys erased. TIS authorization required. All keys present for re-registration. Max 8 keys.
Wheel Alignment / Suspension Work Affected: Steering Angle Sensor
SAS zero-point via Techstream. Drive straight 35+ mph after reset.
Forward Camera Replacement
Camera module replacement requires full recalibration using Techstream.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using Techstream.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using Techstream.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.
SRS MODULES
SRS Modules
SRS Control Unit 8917048J20
- PART
- 8917048J20
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 8917048E30
- PART
- 8917048E30
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 8917048J90
- PART
- 8917048J90
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
ECU MODULES
ECU Modules
ECM - 2.5L A25A-FXS Hybrid (FWD/AWD) ~89661-48
- PART
- ~89661-48
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso SH72543 / Renesas RH850
- NOTES
- HV service plug out mandatory. Techstream: TIS calibration + VIN registration + IMMO coding + injector compensation (QR code per injector). Same procedure as 2023.
MG ECU (Motor-Generator Control) ~89650-48
- PART
- ~89650-48
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso
- NOTES
- HV disable required. Resolver zero-point calibration via Techstream.
HV Battery ECU ~89892-48
- PART
- ~89892-48
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso
- NOTES
- HV service plug out. OEM only. SOC/cell balance verify.
Rear Motor Inverter (E-Four AWD - XLE/Limited) ~G9240-48
- PART
- ~G9240-48
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso
- NOTES
- AWD XLE/Limited only. HV service plug out. Techstream initialization. AWD function verify.
BCM MODULES
BCM Modules
Body ECU (Smart Entry / Body Integration) ~89220-48080
- PART
- ~89220-48080
- SECURITY
- AES-128 DST-AES
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream initialization. Smart Key re-registration - all keys present.
Smart Key ECU ~89990-48070
- PART
- ~89990-48070
- SECURITY
- AES-128 DST-AES
- CODING
- Yes
- CLONE
- No
- NOTES
- All keys erased on replacement. TIS authorization required. All keys present for Techstream registration. Max 8 keys.
Power Liftgate ECU ~89640-48
- PART
- ~89640-48
- SECURITY
- standard
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream PLG init. Height limit. Obstacle detection verify.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - U760E CVT 89530-0T
- PART
- 89530-0T
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH72543
- NOTES
- Requires Toyota TIS or J2534 tool. CVT relearn via test drive 10-15 minutes. ATF WS fluid only. VIN coding mandatory.
ABS / BRAKE MODULES
ABS / Brake Modules
Skid Control ECU (ABS/VSC/TRAC) - Hybrid ~89540-48
- PART
- ~89540-48
- CLONE
- No
- NOTES
- Techstream ABS/VSC init. SAS zero-point calibration required. Hybrid regen braking verify.
Wheel Speed Sensor - Front Left ~89542-48
- PART
- ~89542-48
- CLONE
- No
- NOTES
- Active Hall-effect. DTC clear + road test 15+ mph.
Wheel Speed Sensor - Front Right ~89543-48
- PART
- ~89543-48
- CLONE
- No
- NOTES
- Same as front left.
Wheel Speed Sensor - Rear Left ~89545-48
- PART
- ~89545-48
- CLONE
- No
- NOTES
- E-Four proximity check.
Wheel Speed Sensor - Rear Right ~89544-48
- PART
- ~89544-48
- CLONE
- No
- NOTES
- Same as rear left.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 83800-06470
- PART
- 83800-06470
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 83800-06480
- PART
- 83800-06480
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (spiral cable 84306 family)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Display Audio - 12.3 inch (all trims) ~86140-48
- PART
- ~86140-48
- NOTES
- 12.3 inch standard all trims. Wireless CarPlay and Android Auto. OTA capable. JBL on Limited. Final year - check parts availability.
Star Gaze Panoramic Roof (XLE / Limited) ~63204-48
- PART
- ~63204-48
- NOTES
- Electrochromic panoramic roof - signature Venza feature. OEM glass only. Verify parts availability for 2024.
Wireless Charger (XLE / Limited) ~86907-48
- PART
- ~86907-48
- NOTES
- Qi charging pad. Verify function post-replacement.
Digital Rearview Mirror (Limited) ~87810-48
- PART
- ~87810-48
- NOTES
- Camera display mirror on Limited. Techstream DTC check.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Toyota Smart Key / Transponder
- Add Key Yes
- All Keys Lost Yes
Toyota Smart Entry - AES-128 DST-AES transponder; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys; 315 MHz RF (US market)
IMMOBILIZER MODULES
Immobilizer Modules
Toyota Immobilizer - Smart Key ECU (AES-128) ~89990-48070
- PART
- ~89990-48070
- SECURITY
- AES-128 DST-AES
- NOTES
- Gen 4. No OBD pin extraction. AKL: TIS dealer authorization. Techstream only. Max 8 keys. TOY48 blade.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob ~89904-48
- PART
- ~89904-48
- NOTES
- AES-128 DST-AES. Techstream only. Add key: 1 working key minimum. AKL: TIS authorization. TOY48 blade. CR2032. Max 8 keys. Final production year - verify key fob availability.
Replacement Notes
Toyota Smart Key / Transponder system. Techstream required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- TNGA-K Unibody - High-Tensile Steel with Structural Adhesive Bonding, 5-Door Crossover SUV
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
- Infotainment
- Toyota Audio Multimedia 12.3" standard (all trims); Wireless Apple CarPlay; Wireless Android Auto; Toyota Connected Services
- OTA Capable
- Yes
- Infotainment Name
- Toyota Audio Multimedia
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. 2021+ Venza not listed in CARS.md.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2026 Toyota Venza?
ADAS calibration pricing for a 2026 Toyota Venza depends on which of its 8 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear Cross Traffic Alert (RCTA). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2026 Toyota Venza?
Yes. The 2026 Toyota Venza uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 8917048J20. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2026 Toyota Venza?
After windshield replacement on a 2026 Toyota Venza, Forward Camera (Monocular), Forward Radar (77GHz), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2026 Toyota Venza module service take?
Most 2026 Toyota Venza onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 21 programmable modules documented in our database (4 ECU, 3 BCM, 1 TCU, 5 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2026 Toyota Venza on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2026 Toyota Venza. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2026 Toyota Venza programming?
Every programming, cloning, and calibration job on the 2026 Toyota Venza is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2026 Toyota Venza with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2026 Toyota Venza. Immobilizer generation on this platform: Toyota Smart Key / Transponder. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2026 Toyota Venza can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2026 Toyota Venza. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 5 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 8 ADAS module
Infotainment on this platform: Toyota Audio Multimedia. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2026 Toyota Venza covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 86790-48180 (FWD CAM TSS2.5, 88210-48100 (FWD RADAR), 88162-48020 (BSM-L), 88161-48020 (BSM-R)
- ECU / PCM Part Numbers
- 89661-48 (ECM 2.5L A25A-FXS, VERIFY 2026 TIS), 89650-48 (MG ECU), 89892-48 (HV BATT), G9240-48 (REAR INVERTER AWD)
- BCM / Body Module Part Numbers
- ~89220-48080, ~89990-48070, ~89640-48
- TCU / TCM Part Numbers
- 89530-0T
- SRS / Airbag Module Part Numbers
- 8917048J20, 8917048E30, 8917048J90
- ABS / EBCM Part Numbers
- 44050-48040 (FWD HYBRID), 44050-48050 (E-FOUR AWD HYBRID)
- Instrument Cluster (IPC) Part Numbers
- 83800-06470, 83800-06480
- Transmission Control Module (TCM) Part Numbers
- 89530-0T
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (SPIRAL CABLE 84306 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2026 Toyota Venza
These vehicles use one or more of the same replacement modules indexed for this vehicle.