3,200+ Vehicles Supported

1-Year Unlimited Guarantee

Same-Day Mobile Service

DFW Serving Dallas / Fort Worth

2011-2018 Ram 1500 Generation Guide

Ram 1500 4th Gen DS (2011-2018) ADAS Calibration & Module Programming

Covers model years 2011-2018 - one service guide for the whole generation.

Full ADAS calibration, module programming, and key security work for every Ram 1500 built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.

Platform DS/DJ (4th Gen, 2009-2018)
CAN Architecture CAN-C (500kbps HS-CAN) + CAN-IHS + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps
Security Chrysler RFHUB/SKREEM - 128-bit rolling code, 315MHz RF (US); PEM on Laramie+; no OBD PIN extraction; AKL via wiTECH + DealerConnect

Get a Quote See Supported Modules

The ADAS, module, and security rows below are consolidated across the full 2011-2018 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2011-2018”.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2015 RAM 1500. On this vehicle we cover documented systems include Rear View Camera, Forward Collision Warning (FCW) - Forward Camera, and Blind Spot Monitor Sensor - Left (BSM), this DS/DJ (4th Gen, 2009-2018) platform vehicle, WCM / SKIM immobilizer support, Uconnect 4C infotainment programming. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.

Platform

DS/DJ (4th Gen, 2009-2018)

Production

2011-present

Trim Levels

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Drivetrain

RWD / 4WD

Engine

CAN Speed

CAN-C (500kbps HS-CAN) + CAN-IHS + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps

Feature availability 4

Immobilizer: WCM / SKIM

Standard

Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.

Platform: DS/DJ (4th Gen, 2009-2018)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

DT SafetyTec: Forward Collision Alert + Automatic Emergency Braking, Blind Spot

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

Platform: RAM DT (5th Gen, 2024)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Stellantis wiTECH 2.0

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

OEM subscription required

Make-level OEM tool map plus exact-year gateway and ADAS fields.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Tool subscription required

Service-level scanner-vendor source packet plus exact-year ADAS records.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Bench programmer source packet plus exact-year module/security records.

PLATFORM

Know this platform

This platform uses CAN-C (500kbps HS-CAN) + CAN-IHS + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps with ISO 15765-4 CAN (500 kbps HS-CAN).

CAN: CAN-C (500kbps HS-CAN) + CAN-IHS + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps
OBD: ISO 15765-4 CAN (500 kbps HS-CAN)

can_architecture obd_protocol

GENERATION SERVICE SNAPSHOT

Generation service summary for Ram 1500 4th Gen DS (2011-2018)

Generation coverage

This page consolidates Ram 1500 service data for 2011-2018 across 8 model years; 8 years have merged CCT data.

Choose a year

ADAS coverage

Merged ADAS coverage includes 24 system records, including Rear View Camera (2011-2014), Blind Spot Monitor Sensor - Left (BSM) (2011-2014), Blind Spot Monitor Sensor - Right (BSM) (2011-2014), and ParkSense Ultrasonic Sensors (Front/Rear) (2011-2014). Year-marked systems apply only to the shown range.

View ADAS data

Calibration triggers

This generation has 17 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.

View triggers

Programmable modules

The merged generation page indexes 54 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.

View modules

Gateway and security

Gateway, immobilizer, and key-security coverage includes 9 merged records. Security procedures vary by year - verify by VIN.

View security

Core Auto Logic capability

Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Ram 1500 2011-2018 span, with exact-year validation before service.

Get a quote

CALIBRATION

Do I need calibration?

PCM/ECM Replacement 1

2011-2014

Yes

wiTECH2 SPS flash + SKREEM relearn required.

ABS Module Replacement 1

2011-2014

Yes

wiTECH2 ABS bleed + WSS relearn.

Rear Bumper Repair or Replacement 1

2011-2018

Yes

BSD radar alignment required after rear bumper R&R. Use wiTECH2.

BSM Sensor Replacement 2

2011-2014

Yes

Blind spot monitoring sensor replacement requires calibration using wiTECH2.

2015-2018

wiTECH BSD init. Fixed mount. DTC clear. Road verify 20+ mph.

Mirror Replacement 1

2011-2018

Conditional

If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use wiTECH2 if applicable.

Windshield Replacement (ADAS Equipped) 1

2015-2018

Forward camera static cal via wiTECH ADAS module. Level surface, ~25 ft target. Confirm 2024 wiTECH software version for latest calibration file. FCA and LDW function verify.

Forward Camera Replacement 1

2015-2018

wiTECH ADAS init + static cal. Use 2024 calibration.

Forward Radar Replacement 1

2015-2018

wiTECH radar alignment. Level, no obstructions.

Surround View Camera Replacement 1

2015-2018

wiTECH surround view init + per-camera calibration. Uconnect 12" required.

BCM or TIPM Replacement 1

2015-2018

wiTECH flash + PROXI. All options reconfigured.

ECM Replacement 1

2015-2018

wiTECH flash + DealerConnect + PROXI. Engine-specific adaptations.

TCM Replacement 1

2015-2018

wiTECH flash + PROXI + adaptive reset. 500-mile relearn.

ORC Replacement 1

2015-2018

wiTECH init. REPLACE ONLY. SRS DTC clear.

ABS / ESC Module Replacement 1

2015-2018

wiTECH init + 4-wheel bleed + SAS zero-point. Drive 25+ mph straight.

Wheel Alignment / Steering Component 1

2015-2018

SAS zero-point via wiTECH. Drive straight 25+ mph.

Any Front-End Collision 1

2015-2018

Yes

Inspect and recalibrate forward camera after any front-end collision using wiTECH2.

MODEL YEARS

Year-by-year details

Year	VIN split	Infotainment	Trim notes
2011	VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.		Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2012	VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.		Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2013	VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.		Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2014	VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.		Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2015	VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.	Uconnect 4C	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2016	VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.	Uconnect 4C	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2017	VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.	Uconnect 4C	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2018	VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.	Uconnect 4C	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

24 ADAS systems documented across 2011-2018. Rows that apply to only part of the generation carry a year badge.

Filter by year

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

DT SafetyTec: Forward Collision Alert + Automatic Emergency Braking, Blind Spot Detection, Rear Cross Path Detection, Adaptive Cruise, Lane Departure Warning; Surround View (Laramie+, Uconnect 12"); ParkSense ultrasonic; minor ADAS refinements 2024

Scroll for part numbers and Details

System	Type	Category	Cal. Type	Supported	Part #
Rear View Camera 2011-2014	Rear Camera	Camera	Static	YES	-
Blind Spot Monitor Sensor - Left (BSM) 2011-2014	Side Radar	Radar	Static + Dynamic	YES	-
Blind Spot Monitor Sensor - Right (BSM) 2011-2014	Side Radar	Radar	Static + Dynamic	YES	-
ParkSense Ultrasonic Sensors (Front/Rear) 2011-2014	Ultrasonic	Ultrasonic	None	YES	-
Rear View Camera 2015	Rear Camera	Camera	Static	YES	-
Forward Collision Warning (FCW) - Forward Camera 2015	Forward Camera	Camera	Static	YES	-
Blind Spot Monitor Sensor - Left (BSM) 2015	Side Radar	Radar	Static + Dynamic	YES	-
Blind Spot Monitor Sensor - Right (BSM) 2015	Side Radar	Radar	Static + Dynamic	YES	-
ParkSense Ultrasonic Sensors (Front/Rear) 2015	Ultrasonic	Ultrasonic	None	YES	-
Rear View Camera 2016	Rear Camera	Camera	Static	YES	-
Forward Collision Warning (FCW) - Forward Camera 2016	Forward Camera	Camera	Static	YES	-
Blind Spot Monitor Sensor - Left (BSM) 2016	Side Radar	Radar	Static + Dynamic	YES	-
Blind Spot Monitor Sensor - Right (BSM) 2016	Side Radar	Radar	Static + Dynamic	YES	-
ParkSense Ultrasonic Sensors (Front/Rear) 2016	Ultrasonic	Ultrasonic	None	YES	-
Rear View Camera 2017	Rear Camera	Camera	Static	YES	-
Forward Collision Warning (FCW) - Forward Camera 2017	Forward Camera	Camera	Static	YES	-
Blind Spot Monitor Sensor - Left (BSM) 2017	Side Radar	Radar	Static + Dynamic	YES	-
Blind Spot Monitor Sensor - Right (BSM) 2017	Side Radar	Radar	Static + Dynamic	YES	-
ParkSense Ultrasonic Sensors (Front/Rear) 2017	Ultrasonic	Ultrasonic	None	YES	-
Rear View Camera 2018	Rear Camera	Camera	Static	YES	-
Forward Collision Warning (FCW) - Forward Camera 2018	Forward Camera	Camera	Static	YES	-
Blind Spot Monitor Sensor - Left (BSM) 2018	Side Radar	Radar	Static + Dynamic	YES	-
Blind Spot Monitor Sensor - Right (BSM) 2018	Side Radar	Radar	Static + Dynamic	YES	-
ParkSense Ultrasonic Sensors (Front/Rear) 2018	Ultrasonic	Ultrasonic	None	YES	-

WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

PCM/ECM Replacement 2011-2014

wiTECH2 SPS flash + SKREEM relearn required.

ABS Module Replacement 2011-2014

wiTECH2 ABS bleed + WSS relearn.

Rear Bumper Repair or Replacement

BSD radar alignment required after rear bumper R&R. Use wiTECH2.

BSM Sensor Replacement 2011-2014

Blind spot monitoring sensor replacement requires calibration using wiTECH2.

Mirror Replacement

If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use wiTECH2 if applicable.

Windshield Replacement (ADAS Equipped) 2015-2018

Forward camera static cal via wiTECH ADAS module. Level surface, ~25 ft target. Confirm 2024 wiTECH software version for latest calibration file. FCA and LDW function verify.

Forward Camera Replacement 2015-2018

wiTECH ADAS init + static cal. Use 2024 calibration.

Forward Radar Replacement 2015-2018

wiTECH radar alignment. Level, no obstructions.

BSM Sensor Replacement 2015-2018

wiTECH BSD init. Fixed mount. DTC clear. Road verify 20+ mph.

Surround View Camera Replacement 2015-2018

wiTECH surround view init + per-camera calibration. Uconnect 12" required.

BCM or TIPM Replacement 2015-2018

wiTECH flash + PROXI. All options reconfigured.

ECM Replacement 2015-2018

wiTECH flash + DealerConnect + PROXI. Engine-specific adaptations.

TCM Replacement 2015-2018

wiTECH flash + PROXI + adaptive reset. 500-mile relearn.

ORC Replacement 2015-2018

wiTECH init. REPLACE ONLY. SRS DTC clear.

ABS / ESC Module Replacement 2015-2018

wiTECH init + 4-wheel bleed + SAS zero-point. Drive 25+ mph straight.

Wheel Alignment / Steering Component 2015-2018

SAS zero-point via wiTECH. Drive straight 25+ mph.

Any Front-End Collision 2015-2018

Inspect and recalibrate forward camera after any front-end collision using wiTECH2.

MODULE COVERAGE

Modules we program on this generation

54 documented Ram 1500 modules across 2011-2018. Open a group for part numbers, programming protocol, security notes, and clone support.

SRS MODULES

SRS Modules

Occupant Restraint Controller (ORC) x8

56054622AD Verify by VIN 2011-2012 Under center console

_years covers only 2011-2012 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012

Always match the full part number before buying a used module.

PART: 56054622AD
LOCATION: Under center console
MFG: Continental
NOTES: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

56054623AD Verify by VIN 2011-2012 Under center console

_years covers only 2011-2012 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012

Always match the full part number before buying a used module.

PART: 56054623AD
LOCATION: Under center console
MFG: Continental
NOTES: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

56054037AB Verify by VIN 2011-2012 Under center console

_years covers only 2011-2012 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012

Always match the full part number before buying a used module.

PART: 56054037AB
LOCATION: Under center console
MFG: Continental
NOTES: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

68346715AC Verify by VIN 2013-2016, 2018 Under center console

_years covers only 2013-2016, 2018 for this generation

Used/donor module guide

Compatible donor years: 2013, 2014, 2015, 2016, 2018

Always match the full part number before buying a used module.

PART: 68346715AC
LOCATION: Under center console
MFG: Continental
NOTES: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

68346712AC Verify by VIN 2013-2018 Under center console

_years covers only 2013-2018 for this generation

Used/donor module guide

Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: 68346712AC
LOCATION: Under center console
MFG: Continental
NOTES: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

6104725AA Verify by VIN 2013-2018 Under center console

_years covers only 2013-2018 for this generation

Used/donor module guide

Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: 6104725AA
LOCATION: Under center console
MFG: Continental
NOTES: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

56038962AD Verify by VIN 2013-2018 Under center console

_years covers only 2013-2018 for this generation

Used/donor module guide

Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: 56038962AD
LOCATION: Under center console
MFG: Continental
NOTES: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

68346721AC Verify by VIN 2017 Under center console

_years covers only 2017 for this generation

Used/donor module guide

Compatible donor years: 2017

Always match the full part number before buying a used module.

PART: 68346721AC
LOCATION: Under center console
MFG: Continental
NOTES: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

ECU MODULES

ECU Modules

PCM - 3.6L Pentastar V6 / 5.7L Hemi V8 / 6.7L Cummins Diesel I6 (HD) Verify by VIN 2011-2014 x1

_years covers only 2011-2014 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Ram Truck PCM. wiTECH2 SPS flash + SKREEM.

ECM - 3.6L Pentastar V6 (2022-2024) Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68490 (VERIFY VIA DEALERCONNECT)
NOTES: wiTECH flash + DealerConnect calibration + PROXI. Throttle adaptation. eTorque BSG reset if equipped.

ECM - 5.7L HEMI V8 Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68439 (VERIFY VIA DEALERCONNECT)
NOTES: wiTECH flash + PROXI. MDS adaptation reset. eTorque BSG reset if equipped.

ECM - 6.4L HEMI TRX Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68480 (VERIFY VIA DEALERCONNECT - TRX SPECIFIC)
NOTES: TRX only. wiTECH TRX-specific calibration + PROXI. (verify via wiTECH/DealerConnect)

ECM - 3.0L EcoDiesel V6 Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68491 (VERIFY VIA DEALERCONNECT)
NOTES: wiTECH flash + PROXI. Diesel IQA entry. DPF regen enable.

eTorque BSG Module (48V, if equipped) Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68484 (VERIFY VIA DEALERCONNECT)
NOTES: 48V HV precautions. wiTECH programming + adaptation reset.

TCM - 8HP75 8-Speed Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68436 (VERIFY VIA DEALERCONNECT)
NOTES: wiTECH flash + PROXI + adaptive reset. 500-mile relearn.

BCM MODULES

BCM Modules

BCM (Body Control Module) Verify by VIN 2011-2014

_years covers only 2011-2014 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: FCA/Stellantis BCM. wiTECH2/StarSCAN SPS programming + SKREEM relearn required.

Body Control Module (BCM) Verify by VIN 2015-2018 ~68414 (VERIFY VIA DEALERCONNECT)

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68414 (VERIFY VIA DEALERCONNECT)
NOTES: wiTECH flash + PROXI alignment. VIN tie. All options. Not plug and play.

TIPM (Totally Integrated Power Module) Verify by VIN 2015-2018 ~68437 (VERIFY VIA DEALERCONNECT)

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68437 (VERIFY VIA DEALERCONNECT)
NOTES: Engine bay. wiTECH flash + PROXI. Verify all circuits.

PEM (Proximity Entry Module) Verify by VIN 2015-2018 ~68379 (VERIFY VIA DEALERCONNECT)

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68379 (VERIFY VIA DEALERCONNECT)
NOTES: wiTECH programming + key re-registration. Laramie+.

TCU / TCM TRANSMISSION MODULES

TCU / TCM Transmission Modules

TCU - ZF 8HP45 8-Speed Auto x5

68233575 Verify by VIN 2011 Bench

_years covers only 2011 for this generation

Used/donor module guide

Compatible donor years: 2011

Donor must match part family 68233575 - requires cloning

Always match the full part number before buying a used module.

PART: 68233575
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon TC1766
NOTES: ZF 8HP45 for V6 models. Bench cloning supported. Requires wiTECH for programming. ZF LifeGuard 8 ATF. VIN coding required. Shift adaptation reset after install.

68233575 Verify by VIN 2012 Bench

_years covers only 2012 for this generation

Used/donor module guide

Compatible donor years: 2012

Donor must match part family 68233575 - requires cloning

Always match the full part number before buying a used module.

PART: 68233575
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon TC1766
NOTES: ZF 8HP45 for V6. Bench cloning supported. Requires wiTECH. ZF LifeGuard 8 ATF. VIN coding required. Shift adaptation reset.

68233575 Verify by VIN 2013 Bench

_years covers only 2013 for this generation

Used/donor module guide

Compatible donor years: 2013

Donor must match part family 68233575 - requires cloning

Always match the full part number before buying a used module.

PART: 68233575
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon TC1766
NOTES: ZF 8HP45 for V6. Bench cloning. wiTECH programming. ZF LifeGuard 8 ATF. VIN coding required.

68233575 Verify by VIN 2014-2017 Bench

_years covers only 2014-2017 for this generation

Used/donor module guide

Compatible donor years: 2014, 2015, 2016, 2017

Donor must match part family 68233575 - requires cloning

Always match the full part number before buying a used module.

PART: 68233575
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon TC1797
NOTES: ZF 8HP45 for V6. Bench cloning. wiTECH programming. ZF LifeGuard 8 ATF. VIN coding required.

68233575 Verify by VIN 2018 Bench

_years covers only 2018 for this generation

Used/donor module guide

Compatible donor years: 2018

Donor must match part family 68233575 - requires cloning

Always match the full part number before buying a used module.

PART: 68233575
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon TC1797
NOTES: ZF 8HP45 for V6. Bench cloning. wiTECH programming. ZF LifeGuard 8 ATF. VIN coding required. Final DS year.

TCU - ZF 8HP70 8-Speed Auto x5

68233576 Verify by VIN 2012 Bench

_years covers only 2012 for this generation

Used/donor module guide

Compatible donor years: 2012

Donor must match part family 68233576 - requires cloning

Always match the full part number before buying a used module.

PART: 68233576
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon TC1766
NOTES: ZF 8HP70 for V8 HEMI models. Bench cloning supported. Requires wiTECH. ZF LifeGuard 8 ATF. VIN coding required. Shift adaptation reset.

68233576 Verify by VIN 2013 Bench

_years covers only 2013 for this generation

Used/donor module guide

Compatible donor years: 2013

Donor must match part family 68233576 - requires cloning

Always match the full part number before buying a used module.

PART: 68233576
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon TC1766
NOTES: ZF 8HP70 for V8 HEMI. Bench cloning. wiTECH programming. ZF LifeGuard 8 ATF. VIN coding required.

68233576 Verify by VIN 2014-2015 Bench

_years covers only 2014-2015 for this generation

Used/donor module guide

Compatible donor years: 2014, 2015

Donor must match part family 68233576 - requires cloning

Always match the full part number before buying a used module.

PART: 68233576
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon TC1797
NOTES: ZF 8HP70 for V8 HEMI. Bench cloning. wiTECH programming. ZF LifeGuard 8 ATF. VIN coding required.

68273057 Verify by VIN 2016-2017 Bench

_years covers only 2016-2017 for this generation

Used/donor module guide

Compatible donor years: 2016, 2017

Donor must match part family 68273057 - requires cloning

Always match the full part number before buying a used module.

PART: 68273057
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon TC1797
NOTES: ZF 8HP70 for V8 HEMI. Bench cloning. wiTECH programming. ZF LifeGuard 8 ATF. VIN coding required.

68273057 Verify by VIN 2018 Bench

_years covers only 2018 for this generation

Used/donor module guide

Compatible donor years: 2018

Donor must match part family 68273057 - requires cloning

Always match the full part number before buying a used module.

PART: 68273057
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon TC1797
NOTES: ZF 8HP70 for V8 HEMI. Bench cloning. wiTECH programming. ZF LifeGuard 8 ATF. VIN coding required. Final DS year.

ABS / BRAKE MODULES

ABS / Brake Modules

ABS/ESC Module (CAB - Controller Antilock Brake) Verify by VIN 2011-2014 x1

_years covers only 2011-2014 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: FCA ABS CAB. wiTECH2 brake system test + WSS relearn.

Wheel Speed Sensor - Front (each) x2

Part 1 Verify by VIN 2011-2014

_years covers only 2011-2014 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Replace if DTC C1014/C1015 set.

~68330 (VERIFY VIA DEALERCONNECT) Verify by VIN 2015-2018

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68330 (VERIFY VIA DEALERCONNECT)
NOTES: Torque per WSM. wiTECH DTC clear. Road test 15+ mph.

Wheel Speed Sensor - Rear (each) x2

Part 1 Verify by VIN 2011-2014

_years covers only 2011-2014 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Replace if DTC C1016/C1017 set.

~68330 REAR (VERIFY VIA DEALERCONNECT) Verify by VIN 2015-2018

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68330 REAR (VERIFY VIA DEALERCONNECT)
NOTES: Same as front.

ABS/ESC Module (Continental MK100) Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68482 (VERIFY VIA DEALERCONNECT)
NOTES: wiTECH init + 4-wheel bleed + SAS zero-point. Drive 25+ mph straight.

Brake Pressure Modulator (HCU) Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

NOTES: wiTECH automated bleed. Firm pedal verify.

OTHER MODULES (IPC, SAS)

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) x12

56046505AF Verify by VIN 2011

_years covers only 2011 for this generation

Used/donor module guide

Compatible donor years: 2011

Donor must match part family 56046505AF - requires cloning

Always match the full part number before buying a used module.

PART: 56046505AF
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

56046518AH Verify by VIN 2012

_years covers only 2012 for this generation

Used/donor module guide

Compatible donor years: 2012

Donor must match part family 56046518AH - requires cloning

Always match the full part number before buying a used module.

PART: 56046518AH
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

56054988AF Verify by VIN 2013

_years covers only 2013 for this generation

Used/donor module guide

Compatible donor years: 2013

Donor must match part family 56054988AF - requires cloning

Always match the full part number before buying a used module.

PART: 56054988AF
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

56054989AH Verify by VIN 2014

_years covers only 2014 for this generation

Used/donor module guide

Compatible donor years: 2014

Donor must match part family 56054989AH - requires cloning

Always match the full part number before buying a used module.

PART: 56054989AH
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

68253780AC Verify by VIN 2015

_years covers only 2015 for this generation

Used/donor module guide

Compatible donor years: 2015

Donor must match part family 68253780AC - requires cloning

Always match the full part number before buying a used module.

PART: 68253780AC
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

68253781AC Verify by VIN 2015

_years covers only 2015 for this generation

Used/donor module guide

Compatible donor years: 2015

Donor must match part family 68253781AC - requires cloning

Always match the full part number before buying a used module.

PART: 68253781AC
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

68253780AD Verify by VIN 2016

_years covers only 2016 for this generation

Used/donor module guide

Compatible donor years: 2016

Donor must match part family 68253780AD - requires cloning

Always match the full part number before buying a used module.

PART: 68253780AD
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

68253781AD Verify by VIN 2016

_years covers only 2016 for this generation

Used/donor module guide

Compatible donor years: 2016

Donor must match part family 68253781AD - requires cloning

Always match the full part number before buying a used module.

PART: 68253781AD
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

68367826AA Verify by VIN 2017

_years covers only 2017 for this generation

Used/donor module guide

Compatible donor years: 2017

Donor must match part family 68367826AA - requires cloning

Always match the full part number before buying a used module.

PART: 68367826AA
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

68367827AA Verify by VIN 2017

_years covers only 2017 for this generation

Used/donor module guide

Compatible donor years: 2017

Donor must match part family 68367827AA - requires cloning

Always match the full part number before buying a used module.

PART: 68367827AA
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

68367826AB Verify by VIN 2018

_years covers only 2018 for this generation

Used/donor module guide

Compatible donor years: 2018

Donor must match part family 68367826AB - requires cloning

Always match the full part number before buying a used module.

PART: 68367826AB
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

68367827AB Verify by VIN 2018

_years covers only 2018 for this generation

Used/donor module guide

Compatible donor years: 2018

Donor must match part family 68367827AB - requires cloning

Always match the full part number before buying a used module.

PART: 68367827AB
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Steering Angle Sensor (SAS) x2

Part 1 Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

CODING: Yes
NOTES: INTEGRATED (clock spring / steering column module

Part 2 Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

CODING: Yes
NOTES: cross-year extension)

CONNECTIVITY & ACCESSORIES

Connectivity & Accessories

Uconnect 5 (OTA, Google built-in on equipped trims) Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

NOTES: Google built-in available 2024 on equipped Laramie+/Limited (verify via DealerConnect). OTA updates enabled. wiTECH radio init if replaced. CarPlay/Android Auto re-pair. Confirm VIN registration post-install.

Surround View System (if equipped) Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

NOTES: wiTECH surround view init + camera calibration. Uconnect 12" required.

Remote Start (OEM RKE-based) Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

NOTES: BCM PROXI enables. wiTECH reconfigure after BCM replacement.

Trailer Brake Controller Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

NOTES: wiTECH config. Uconnect gain adjust. 7-pin verify.

9 gateway, immobilizer, and security items documented across 2011-2018.

KEY SECURITY & IMMOBILIZER

Key Security & Immobilizer

System WCM / SKIM
Add Key Yes
All Keys Lost Yes

Chrysler RFHUB/SKREEM - 128-bit rolling code, 315MHz RF (US); PEM on Laramie+; no OBD PIN extraction; AKL via wiTECH + DealerConnect

IMMOBILIZER MODULES

Immobilizer Modules

SKREEM (Sentry Key Remote Entry Module) Verify by VIN 2011-2014

_years covers only 2011-2014 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: FCA SKREEM. wiTECH2 IMMO registration. AKL: wiTECH2 PIN + SKREEM procedure.

RFHUB / SKREEM Verify by VIN 2015-2018 ~68461 (VERIFY VIA DEALERCONNECT)

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68461 (VERIFY VIA DEALERCONNECT)
NOTES: 128-bit rolling code, 315MHz. No OBD PIN. wiTECH + DealerConnect for replacement and AKL. Max 8 keys.

PEM (key database tie) Verify by VIN 2015-2018 ~68379 (VERIFY VIA DEALERCONNECT)

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68379 (VERIFY VIA DEALERCONNECT)
NOTES: wiTECH programming + key re-registration. Previous keys erased.

ECM (PROXI IMMO tie) Verify by VIN 2015-2018 ~68490, 68439, 68480, 68491 (ENGINE)

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: ~68490, 68439, 68480, 68491 (ENGINE)
NOTES: PROXI mandatory after ECM replacement.

KEY & FOB TYPES

Key & Fob Types

Chrysler/FCA Transponder Key (SKE/Sentry Key, ID46) Verify by VIN 2011-2014

_years covers only 2011-2014 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Sentry Key (ID46). wiTECH2 registration or aftermarket (Autel MaxiIM). Max 8 keys.

FCA Remote Key Fob / Smart Key Verify by VIN 2011-2014

_years covers only 2011-2014 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: 433MHz. wiTECH2 registration or FOB sync procedure.

Proximity Smart Key Fob Verify by VIN 2015-2018

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

NOTES: 315MHz rolling code. Passive entry Laramie+. wiTECH + DealerConnect. Max 8 keys. CR2032.

Standard RKE Key Fob Verify by VIN 2015-2018

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

NOTES: 315MHz. wiTECH + DealerConnect. AKL erases all prior keys.

Emergency Mechanical Key Blade Verify by VIN 2015-2018

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

NOTES: Door lock only. Does not bypass IMMO.

Replacement Notes

Same as 2022-2023. RFHUB/SKREEM ~68461xxx. wiTECH + DealerConnect auth. PROXI mandatory for all module replacements. No OBD PIN extraction. AKL max 8 keys.

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction: Body-on-frame; high-strength steel ladder frame; aluminum/steel mixed body panels
OBD Protocol: ISO 15765-4 CAN (500 kbps HS-CAN)
CAN Architecture: CAN-C (500kbps HS-CAN) + CAN-IHS + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps
Infotainment: Uconnect 5 (12" or 10.1") standard Laramie+; Google built-in on equipped trims (verify via DealerConnect); OTA updates; Apple CarPlay + Android Auto standard; Uconnect 4 on Tradesman/Big Horn
OTA Capable: No
Infotainment Name: Uconnect 4C
ECU Unlock Supported: No
Custom Programming: Yes

WHAT WE RESOLVE

4th Gen DS (2011-2018) common module and ADAS issues

ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Rear View Camera (2011-2014), Blind Spot Monitor Sensor - Left (BSM) (2011-2014), Blind Spot Monitor Sensor - Right (BSM) (2011-2014), and ParkSense Ultrasonic Sensors (Front/Rear) (2011-2014). Year-marked systems apply only to the shown range.
SRS crash-data and warning light SRS service can involve Occupant Restraint Controller (ORC) (2011-2012), Occupant Restraint Controller (ORC) (2013-2016, 2018), and Occupant Restraint Controller (ORC) (2013-2018). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 9 merged security records. Access and all-keys-lost support varies by year - verify by VIN.

FREQUENTLY ASKED QUESTIONS

FAQ

Can you program Ram 1500 (2011-2018) modules?

Yes. Core Auto Logic supports generation-scoped module programming for the Ram 1500 (2011-2018). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.

Which modules are documented for Ram 1500 (2011-2018)?

The Ram 1500 (2011-2018) generation currently shows 36 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Occupant Restraint Controller (ORC) (2011-2012), Occupant Restraint Controller (ORC) (2013-2016, 2018), and Occupant Restraint Controller (ORC) (2013-2018). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 56054622AD (2011-2012) - confirm for your exact year/VIN.

Does Ram 1500 (2011-2018) need ADAS calibration after glass or collision work?

The merged generation data documents 24 ADAS systems, including Rear View Camera (2011-2014), Blind Spot Monitor Sensor - Left (BSM) (2011-2014), Blind Spot Monitor Sensor - Right (BSM) (2011-2014), ParkSense Ultrasonic Sensors (Front/Rear) (2011-2014), and Rear View Camera (2015). Calibration triggers include PCM/ECM Replacement (2011-2014), ABS Module Replacement (2011-2014), Rear Bumper Repair or Replacement, and BSM Sensor Replacement (2011-2014). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.

Can you reset the airbag module on Ram 1500 (2011-2018)?

Yes. The generation data includes 8 SRS records, including Occupant Restraint Controller (ORC) (2011-2012), Occupant Restraint Controller (ORC) (2013-2016, 2018), and Occupant Restraint Controller (ORC) (2013-2018). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 56054622AD (2011-2012) - confirm for your exact year/VIN.

Do all Ram 1500 (2011-2018) years use the same parts?

No assumption should be made across the full span. The generation page merges rows across 2011-2018; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.

Can you program keys or immobilizer systems for Ram 1500 (2011-2018)?

Yes, where the VIN and security workflow support it. The generation data includes 9 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.

How long does service take for Ram 1500 (2011-2018)?

Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.

Is Ram 1500 (2011-2018) service mobile or mail-in?

Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.

OTHER GENERATIONS

More 1500 generations

4th Gen DS 2011-2018 You are here 5th Gen DT 2019-2026

(945) 382-4065 Get a Quote