Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2023-2026 Nissan Z Generation Guide

Nissan Z RZ34 (2023-2026) ADAS Calibration & Module Programming

Covers model years 2023-2026 - one service guide for the whole generation.

Full ADAS calibration, module programming, and key security work for every Nissan Z built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.

  • Platform Nissan FM-platform (RWD sports car; Z34 chassis evolution)
  • CAN Architecture HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
  • Security Nissan Intelligent Key PEPS; rolling code; CONSULT III Plus programmed

The ADAS, module, and security rows below are consolidated across the full 2023-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2023-2026”.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2024 Nissan Z. On this vehicle we cover documented systems include Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, and Blind Spot Monitor Sensor - Left (BSM), this Nissan FM-platform (RWD sports car; Z34 chassis evolution) platform vehicle, Nissan IMMU Gen 3; BCM rolling code immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.

Platform
Nissan FM-platform (RWD sports car; Z34 chassis evolution)
Production
2023-present
Trim Levels
Sport, Performance trims. RZ34 platform. 3.0L V6 twin-turbo, 6-speed manual or 9-speed auto.
Drivetrain
RWD
Engine
-
CAN Speed
HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
Feature availability 3

Safety Shield 360 (basic): Automatic Emergency Braking, Rear Cross Traffic, Blin

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

Immobilizer: Nissan IMMU Gen 3

Standard

Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.

Platform: Nissan FM-platform (RWD sports car

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Nissan CONSULT-III Plus

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

OEM subscription required

Make-level OEM tool map plus exact-year gateway and ADAS fields.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Tool subscription required

Service-level scanner-vendor source packet plus exact-year ADAS records.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Bench programmer source packet plus exact-year module/security records.

PLATFORM

Know this platform

This platform uses HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).

CAN
HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
OBD
ISO 15765-4 CAN (500 kbps)
OPENPILOT / COMMA.AI

Openpilot Compatibility

Not Supported

Not supported - not in openpilot tree

Not in openpilot support tree as of April 2026. Z sports car not ported.

GENERATION SERVICE SNAPSHOT

Generation service summary for Nissan Z RZ34 (2023-2026)

Generation coverage

This page consolidates Nissan Z service data for 2023-2026 across 4 model years; 4 years have merged CCT data.

Choose a year

ADAS coverage

Merged ADAS coverage includes 24 system records, including Safety Shield 360 Forward Camera (Mobileye EyeQ4) (2023), Forward Radar (77GHz) - ACC / AEB (2023), Blind Spot Monitor Sensor - Left (BSM) (2023), and Blind Spot Monitor Sensor - Right (BSM) (2023). Year-marked systems apply only to the shown range.

View ADAS data

Calibration triggers

This generation has 4 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.

View triggers

Programmable modules

The merged generation page indexes 28 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.

View modules

Gateway and security

Gateway, immobilizer, and key-security coverage includes 3 merged records. Security procedures vary by year - verify by VIN.

View security

Core Auto Logic capability

Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Nissan Z 2023-2026 span, with exact-year validation before service.

Get a quote
CALIBRATION

Do I need calibration?

ECM Replacement 1
2023-2026

Yes

CONSULT immobilizer work support + throttle position relearn.

ABS/VDC Module Replacement 1
2023-2026

Yes

CONSULT ABS bleed + VDC sensor reset.

Front Bumper/Radar Service 1
2023-2026

Yes

Automatic Emergency Braking radar recalibration required after front bumper or radar service.

Rear Bumper/Radar Service 1
2023-2026

Yes

Rear cross-traffic radar recalibration after rear bumper work.

MODEL YEARS

Year-by-year details

YearTrim notes
2023Sport, Performance trims. RZ34 platform. 3.0L V6 twin-turbo, 6-speed manual or 9-speed auto.
2024Sport, Performance trims. RZ34 platform. 3.0L V6 twin-turbo, 6-speed manual or 9-speed auto.
2025Sport, Performance trims. RZ34 platform. 3.0L V6 twin-turbo, 6-speed manual or 9-speed auto.
2026Sport, Performance trims. RZ34 platform. 3.0L V6 twin-turbo, 6-speed manual or 9-speed auto.

24 ADAS systems documented across 2023-2026. Rows that apply to only part of the generation carry a year badge.

Filter by year
ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Safety Shield 360 (basic): Automatic Emergency Braking, Rear Cross Traffic, Blind Spot Warning, Rear Sonar; no adaptive cruise (sports focus)

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2023Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2023Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2023Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2023Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2023Rear CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2023Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2024Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2024Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2024Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2024Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2024Rear CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2024Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2025Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2025Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2025Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2025Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2025Rear CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2025Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2026Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2026Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2026Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2026Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2026Rear CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2026Parking SensorUltrasonicNone YES-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

ECM Replacement

CONSULT immobilizer work support + throttle position relearn.

ABS/VDC Module Replacement

CONSULT ABS bleed + VDC sensor reset.

Front Bumper/Radar Service

Automatic Emergency Braking radar recalibration required after front bumper or radar service.

Rear Bumper/Radar Service

Rear cross-traffic radar recalibration after rear bumper work.

MODULE COVERAGE

Modules we program on this generation

28 documented Nissan Z modules across 2023-2026. Open a group for part numbers, programming protocol, security notes, and clone support.

SRS MODULES

SRS Modules

SRS Control Unit Verify by VIN 2023-2024 K8820-6GP0B

_years covers only 2023-2024 for this generation

Used/donor module guide

Compatible donor years: 2023, 2024

Always match the full part number before buying a used module.

PART
K8820-6GP0B
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2024 K8820-6GR0C

_years covers only 2024 for this generation

Used/donor module guide

Compatible donor years: 2024

Always match the full part number before buying a used module.

PART
K8820-6GR0C
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2025 K8820-1YC0A

_years covers only 2025 for this generation

Used/donor module guide

Compatible donor years: 2025

Always match the full part number before buying a used module.

PART
K8820-1YC0A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2025 K8820-6HY0A

_years covers only 2025 for this generation

Used/donor module guide

Compatible donor years: 2025

Always match the full part number before buying a used module.

PART
K8820-6HY0A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2026 K88201YC0A

_years covers only 2026 for this generation

Used/donor module guide

Compatible donor years: 2026

Always match the full part number before buying a used module.

PART
K88201YC0A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2026 K88206HY0A

_years covers only 2026 for this generation

Used/donor module guide

Compatible donor years: 2026

Always match the full part number before buying a used module.

PART
K88206HY0A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU MODULES

ECU Modules

Engine Control Module (ECM) Dealer security required

security_type indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PROTOCOL
OBD
SECURITY
NATS 7 / AES-128
CODING
Yes
CLONE
No
NOTES
ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Online server authentication required. Cloning not supported on 2018+ VIN-locked units.
Transmission Control Module (TCM) OBD coding supported

programming_method indicates OBD programming or coding

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PROTOCOL
OBD
SECURITY
NATS 7 / AES-128
CODING
Yes
CLONE
No
NOTES
TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning not supported.
Body Control Module (BCM) OBD coding supported

programming_method indicates OBD programming or coding

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PROTOCOL
OBD
SECURITY
NATS 7 / AES-128
CODING
Yes
CLONE
No
NOTES
BCM requires coding to vehicle VIN after replacement. Security gateway access required on 2018+ models. All comfort/convenience modules must be re-synced via our diagnostic software.
BCM MODULES

BCM Modules

Body Control Module (BCM) x4
~(VERIFY VIA CONSULT FOR Z 2023) Verify by VIN 2023

_years covers only 2023 for this generation

Used/donor module guide

Compatible donor years: 2023

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR Z 2023)
NOTES
CONSULT-III Plus required for Z 2023 BCM programming and VIN registration. Z RZ34 platform BCM controls lighting, door locks, NATS, pop-up handles, and active exhaust valve control. Program all option codes per VIN. Verify all electrical functions after replacement.
~(VERIFY VIA CONSULT FOR Z 2024) Verify by VIN 2024

_years covers only 2024 for this generation

Used/donor module guide

Compatible donor years: 2024

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR Z 2024)
NOTES
CONSULT-III Plus required for Z 2024 BCM programming and VIN registration. Z RZ34 platform BCM controls lighting, door locks, NATS, pop-up handles, and active exhaust valve control. Program all option codes per VIN. Verify all electrical functions after replacement.
~(VERIFY VIA CONSULT FOR Z 2025) Verify by VIN 2025

_years covers only 2025 for this generation

Used/donor module guide

Compatible donor years: 2025

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR Z 2025)
NOTES
CONSULT-III Plus required for Z 2025 BCM programming and VIN registration. Z RZ34 platform BCM controls lighting, door locks, NATS, pop-up handles, and active exhaust valve control. Program all option codes per VIN. Verify all electrical functions after replacement.
~(VERIFY VIA CONSULT FOR Z 2026) Verify by VIN 2026

_years covers only 2026 for this generation

Used/donor module guide

Compatible donor years: 2026

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR Z 2026)
NOTES
CONSULT-III Plus required for Z 2026 BCM programming and VIN registration. Z RZ34 platform BCM controls lighting, door locks, NATS, pop-up handles, and active exhaust valve control. Program all option codes per VIN. Verify all electrical functions after replacement.
Intelligent Key ECU (NATS) x4
~(VERIFY VIA CONSULT FOR Z 2023) Verify by VIN 2023

_years covers only 2023 for this generation

Used/donor module guide

Compatible donor years: 2023

Donor must match part family ~(VERIFY VIA CONSULT FOR Z 2023); VIN-locked

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR Z 2023)
NOTES
CONSULT-III Plus + ASIST for Intelligent Key ECU replacement. All keys erased on replacement. Maximum 4 keys. Verify push-button start and all remote functions. Z RZ34 uses Hitag Pro / AES-based NATS immobilizer.
~(VERIFY VIA CONSULT FOR Z 2024) Verify by VIN 2024

_years covers only 2024 for this generation

Used/donor module guide

Compatible donor years: 2024

Donor must match part family ~(VERIFY VIA CONSULT FOR Z 2024); VIN-locked

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR Z 2024)
NOTES
CONSULT-III Plus + ASIST for Intelligent Key ECU replacement. All keys erased on replacement. Maximum 4 keys. Verify push-button start and all remote functions. Z RZ34 uses Hitag Pro / AES-based NATS immobilizer.
~(VERIFY VIA CONSULT FOR Z 2025) Verify by VIN 2025

_years covers only 2025 for this generation

Used/donor module guide

Compatible donor years: 2025

Donor must match part family ~(VERIFY VIA CONSULT FOR Z 2025); VIN-locked

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR Z 2025)
NOTES
CONSULT-III Plus + ASIST for Intelligent Key ECU replacement. All keys erased on replacement. Maximum 4 keys. Verify push-button start and all remote functions. Z RZ34 uses Hitag Pro / AES-based NATS immobilizer.
~(VERIFY VIA CONSULT FOR Z 2026) Verify by VIN 2026

_years covers only 2026 for this generation

Used/donor module guide

Compatible donor years: 2026

Donor must match part family ~(VERIFY VIA CONSULT FOR Z 2026); VIN-locked

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR Z 2026)
NOTES
CONSULT-III Plus + ASIST for Intelligent Key ECU replacement. All keys erased on replacement. Maximum 4 keys. Verify push-button start and all remote functions. Z RZ34 uses Hitag Pro / AES-based NATS immobilizer.
Active Sound Enhancement (ASE) Module Verify by VIN x1

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

NOTES
CONSULT calibration required if active exhaust or ASE module is replaced. Verify exhaust valve operation and sound enhancement modes after programming.
TCU / TCM TRANSMISSION MODULES

TCU / TCM Transmission Modules

TCU - RE7R01B 9-Speed Auto Verify by VIN 31036-6MA0A

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

PART
31036-6MA0A
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Renesas RH850
NOTES
Jatco 9-speed auto variant. Requires Consult III+ for programming. Nissan ATF Matic W fluid. VIN coding required. 6MT variant has no TCU.
ABS / BRAKE MODULES

ABS / Brake Modules

ABS Actuator and Electric Unit (Control Unit) Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

NOTES
Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each) Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

NOTES
Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each) Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

NOTES
Active sensor.
OTHER MODULES (IPC, SAS)

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) Verify by VIN 2023-2025 24809-6GP0A, 24845-6GP0A

_years covers only 2023-2025 for this generation

Used/donor module guide

Compatible donor years: 2023, 2024, 2025

Donor must match part family 24809-6GP0A - requires cloning

Always match the full part number before buying a used module.

PART
24809-6GP0A, 24845-6GP0A
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2026 24810-6GP0A

_years covers only 2026 for this generation

Used/donor module guide

Compatible donor years: 2026

Donor must match part family 24810-6GP0A - requires cloning

Always match the full part number before buying a used module.

PART
24810-6GP0A
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

CODING
Yes
NOTES
INTEGRATED (spiral cable 25554 family)
CONNECTIVITY & ACCESSORIES

Connectivity & Accessories

9" NissanConnect touchscreen Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

NOTES
Programming required after replacement. Verify software version compatibility before install.
Remote Start Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

NOTES
Factory remote start. BCM configuration required after replacement on equipped vehicles.

3 gateway, immobilizer, and security items documented across 2023-2026.

GATEWAY / SECURITY MODULES

Gateway / Security Modules

Central Gateway Module Dealer security required

vin_locked indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

MFG
NXP / Freescale
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
MPC5606BK
NOTES
Compatibility label: X-TRAIL. BCM | Notes: Read/Write
KEY SECURITY & IMMOBILIZER

Key Security & Immobilizer

  • System Nissan IMMU Gen 3; BCM rolling code
  • Add Key Yes - CONSULT III Plus
  • All Keys Lost Yes - CONSULT III Plus

Nissan Intelligent Key PEPS; rolling code; CONSULT III Plus programmed

IMMOBILIZER MODULES

Immobilizer Modules

Module 1 Bench clone required

service_notes indicates cloning or bench work

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

NOTES
NATS 7 AES-secured system. Dealer PIN required for all-keys-lost. Add-key with working key via our diagnostic software.
KEY & FOB TYPES

Key & Fob Types

Intelligent Key (Proximity) OBD coding supported

service_notes indicates OBD programming or coding

Used/donor module guide

Compatible donor years: 2023, 2024, 2025, 2026

Always match the full part number before buying a used module.

NOTES
NATS 7 Intelligent Key. Program via OBD with our key programming equipment. Working key or dealer PIN required for all-keys-lost.

Replacement Notes

Nissan IMMU Gen 3; BCM rolling code system. CONSULT-III Plus required for key programming and module replacement. Pin extraction: limited (aes encryption); akl supported.

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
High-strength steel unibody; sports coupe
OBD Protocol
ISO 15765-4 CAN (500 kbps)
CAN Architecture
HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
Infotainment
9" NissanConnect touchscreen; Apple CarPlay/Android Auto
OTA Capable
No
ECU Unlock Supported
No
Custom Programming
Yes
WHAT WE RESOLVE

RZ34 (2023-2026) common module and ADAS issues

  • ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Safety Shield 360 Forward Camera (Mobileye EyeQ4) (2023), Forward Radar (77GHz) - ACC / AEB (2023), Blind Spot Monitor Sensor - Left (BSM) (2023), and Blind Spot Monitor Sensor - Right (BSM) (2023). Year-marked systems apply only to the shown range.
  • SRS crash-data and warning light SRS service can involve SRS Control Unit (2023-2024), SRS Control Unit (2024), and SRS Control Unit (2025). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
  • Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
  • Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 3 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS

FAQ

Can you program Nissan Z (2023-2026) modules?

Yes. Core Auto Logic supports generation-scoped module programming for the Nissan Z (2023-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.

Which modules are documented for Nissan Z (2023-2026)?

The Nissan Z (2023-2026) generation currently shows 22 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Unit (2023-2024), SRS Control Unit (2024), and SRS Control Unit (2025). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: K8820-6GP0B (2023-2024) - confirm for your exact year/VIN.

Does Nissan Z (2023-2026) need ADAS calibration after glass or collision work?

The merged generation data documents 24 ADAS systems, including Safety Shield 360 Forward Camera (Mobileye EyeQ4) (2023), Forward Radar (77GHz) - ACC / AEB (2023), Blind Spot Monitor Sensor - Left (BSM) (2023), Blind Spot Monitor Sensor - Right (BSM) (2023), and Rear View Camera (RVC) (2023). Calibration triggers include ECM Replacement, ABS/VDC Module Replacement, Front Bumper/Radar Service, and Rear Bumper/Radar Service. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.

Can you reset the airbag module on Nissan Z (2023-2026)?

Yes. The generation data includes 6 SRS records, including SRS Control Unit (2023-2024), SRS Control Unit (2024), and SRS Control Unit (2025). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: K8820-6GP0B (2023-2024) - confirm for your exact year/VIN.

Do all Nissan Z (2023-2026) years use the same parts?

No assumption should be made across the full span. The generation page merges rows across 2023-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.

Can you program keys or immobilizer systems for Nissan Z (2023-2026)?

Yes, where the VIN and security workflow support it. The generation data includes 3 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.

How long does service take for Nissan Z (2023-2026)?

Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.

Is Nissan Z (2023-2026) service mobile or mail-in?

Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.

OTHER GENERATIONS

More Z generations

RZ34 2023-2026 You are here