VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2019 Nissan Titan Supported Services
2019 Nissan Titan
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform A61 (3rd Gen Titan, 2017+) - Body-on-Frame RWD/4WD
- CAN Architecture Nissan CAN (AV-CAN / MS-CAN / LIN); OBD2 DLC ISO 15765-4 CAN 500kbps
- Security Nissan NATS5 / NVIS IMMO5 - AES rolling code; no OBD pin extraction; AKL via CONSULT-III Plus + ASIST; max 4 I-Keys
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 Nissan Titan. On this vehicle we cover documented systems include Intelligent Emergency Braking - Forward Camera, Front Radar (IEB - if equipped), and Around View Monitor (AVM), this A61 (3rd Gen Titan, 2017+) - Body-on-Frame RWD/4WD platform vehicle, Nissan NATS5 / NVIS IMMO5 (A61) immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
A61 (3rd Gen Titan, 2017+) - Body-on-Frame RWD/4WD
Production
2004-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
Nissan CAN (AV-CAN / MS-CAN / LIN); OBD2 DLC ISO 15765-4 CAN 500kbps
YEAR-SPECIFIC NOTES
Exact-year service summary for 2019 Nissan Titan
ADAS coverage
This 2019 Nissan Titan page documents 4 ADAS systems, including Intelligent Emergency Braking - Forward Camera, Front Radar (IEB - if equipped), Around View Monitor (AVM), and BSD Radar (if equipped).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement (IEB-equipped), AVM Camera or ECU Replacement, Wheel Alignment / Suspension Work, and Forward Camera Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 15 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2019 Nissan Titan.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2019 Nissan Titan using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
2019 A61: Intelligent Emergency Braking available on equipped trims. Around View - Available; Platform: A61 (3rd Gen Titan, 2017+) - Confirmed
Driver-assist suite
2019 A61: Intelligent Emergency Braking available on equipped trims. Around View Monitor optional. Blind Spot Detection optional. No ProPilot Assist on 2019 Titan.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
Infotainment context
8" NissanConnect; Apple CarPlay + Android Auto available SV+
Network and access
CAN: Nissan CAN (AV-CAN / MS-CAN / LIN); OBD2 DLC ISO 15765-4 CAN 500kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2019 Nissan Titan. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
4 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
2 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
1 module documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
3 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
9 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
2019 A61: Intelligent Emergency Braking available on equipped trims. Around View
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: A61 (3rd Gen Titan, 2017+)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Nissan Titan issues we resolve on this platform: Intelligent Emergency Braking - Forward Camera, Front Radar (IEB - if equipped), Around View Monitor (AVM), and BSD Radar (if equipped) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - A61 (3rd Gen Titan, 2017+) - Body-on-Frame RWD/4WD platform uses Nissan CAN (AV-CAN / MS-CAN / LIN); OBD2 DLC ISO 15765-4 CAN 500kbps.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
2019 A61: Intelligent Emergency Braking available on equipped trims. Around View Monitor optional. Blind Spot Detection optional. No ProPilot Assist on 2019 Titan.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Intelligent Emergency Braking - Forward Camera | Forward Camera | Camera | Static | YES | - | |
| Front Radar (IEB - if equipped) | Front Radar | Radar | Static | YES | - | |
| Around View Monitor (AVM) | Surround Camera | Camera | Static | YES | - | |
| BSD Radar (if equipped) | Side Radar | Radar | Static + Dynamic | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement (IEB-equipped) Affected: Forward Camera, IEB
Static CONSULT calibration required on IEB-equipped 2019 Titans.
AVM Camera or ECU Replacement Affected: Around View Monitor
Full 4-camera CONSULT calibration with mat on level surface.
Wheel Alignment / Suspension Work Affected: ABS/VDC SAS
SAS zero-point via CONSULT. Drive straight at 25+ mph.
Forward Camera Replacement
Camera module replacement requires full recalibration using CONSULT-III+.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using CONSULT-III+.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use CONSULT-III+.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using CONSULT-III+.
Mirror Replacement
Surround view mirror camera recalibration required after mirror R&R. Use CONSULT-III+.
Front Bumper Repair or Replacement
Front surround view camera recalibration required after front bumper R&R. Use CONSULT-III+.
SRS Modules
SRS Control Unit 985P09FT9B
- Part number
- 985P09FT9B
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit 985109FS8A
- Part number
- 985109FS8A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit 985P19FT9B
- Part number
- 985P19FT9B
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU Modules
ECM - 5.6L VK56VD V8 ~23710-9FT (VERIFY 2019 SUFFIX)
- Part number
- ~23710-9FT (VERIFY 2019 SUFFIX)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Hitachi/Renesas
- Notes
- CONSULT flash + VIN + NATS5 sync. Throttle body + idle learn.
ECM - Cummins 5.0L Diesel (Titan XD - FINAL 2019 MY) ASIST - XD 2019)
- Part number
- ASIST - XD 2019)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Cummins ECM
- Notes
- Final year of Cummins 5.0L V8 diesel in Titan XD. Cummins-specific calibration file via ASIST. Not interchangeable with VK56VD.
TCM - RE7R01B 7-Speed AT ~31036-9FT
- Part number
- ~31036-9FT
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Jatco 7AT
- Notes
- CONSULT TCM flash + adaptive reset. Matic-S ATF.
BCM Modules
Body Control Module (BCM) ~284B1-9FT
- Part number
- ~284B1-9FT
- Security
- nats5
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- CONSULT coding + VIN registration. Not plug and play.
Intelligent Key ECU ~285E1-9FT
- Part number
- ~285E1-9FT
- Security
- nats5
- Coding required
- Yes
- Cloning supported
- No
- Notes
- CONSULT + ASIST dealer auth. All prior keys erased. Max 4 I-Keys.
TCU / TCM Transmission Modules
TCU - 9NR 9-Speed Auto 31036-EZ30A
- Part number
- 31036-EZ30A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas RH850
- Notes
- Jatco 9-speed RE7R01B. Requires Consult III+ for programming. Nissan ATF Matic W fluid. VIN coding required.
ABS / Brake Modules
ABS/VDC Control Module ~47660-9FT
- Part number
- ~47660-9FT
- Cloning supported
- Yes
- Notes
- CONSULT initialization + SAS zero-point after replacement or alignment.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 24810-EZ30D
- Part number
- 24810-EZ30D
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Around View Monitor System (AVM) ASIST - A61 SL
- Part number
- ASIST - A61 SL
- Notes
- Optional SL/Platinum 2017. Full 4-camera mat calibration required via CONSULT after any camera or AVM ECU replacement. See rep_adas for detailed procedure.
Trailer Brake Controller (if equipped) ASIST - A61)
- Part number
- ASIST - A61)
- Notes
- CONSULT body system check after TBC replacement. Verify trailer brake output via CONSULT live data. A61 Titan max trailer rating 9,660 lbs (verify by trim/config).
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- A61 Body-on-Frame - High-Strength Steel Ladder Frame
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Nissan CAN (AV-CAN / MS-CAN / LIN); OBD2 DLC ISO 15765-4 CAN 500kbps
- Infotainment
- 8" NissanConnect; Apple CarPlay + Android Auto available SV+
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2019 - 5.0L H61 (ISV5.0).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2019 Nissan Titan?
ADAS calibration pricing for a 2019 Nissan Titan depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Intelligent Emergency Braking - Forward Camera, Front Radar (IEB - if equipped), Around View Monitor (AVM), and BSD Radar (if equipped). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2019 Nissan Titan?
Yes. The 2019 Nissan Titan uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 985P09FT9B. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2019 Nissan Titan?
After windshield replacement on a 2019 Nissan Titan, Intelligent Emergency Braking - Forward Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2019 Nissan Titan module service take?
Most 2019 Nissan Titan onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (3 ECU, 2 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2019 Nissan Titan on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2019 Nissan Titan. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2019 Nissan Titan programming?
Every programming, cloning, and calibration job on the 2019 Nissan Titan is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2019 Nissan Titan can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2019 Nissan Titan. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 2 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 4 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2019 Nissan Titan covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 28438-EZ30D
- ECU / PCM Part Numbers
- 23703-EZ30G, 23703-EZ30H
- BCM / Body Module Part Numbers
- ~284B1-9FT, ~285E1-9FT
- TCU / TCM Part Numbers
- 31036-EZ30A
- SRS / Airbag Module Part Numbers
- 985P09FT9B, 985109FS8A, 985P19FT9B
- ABS / EBCM Part Numbers
- 47660-EZ30D
- Instrument Cluster (IPC) Part Numbers
- 24810-EZ30D
- Transmission Control Module (TCM) Part Numbers
- 31036-EZ30A
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2019 Nissan Titan
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.