3,200+ Vehicles Supported

1-Year Unlimited Guarantee

DFW Mobile Service

DFW Serving Dallas / Fort Worth

2016 Nissan Titan Supported Services

2016 Nissan Titan

ADAS calibration, module programming, and security relearns

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Technical snapshot

Platform A61 (3rd Gen Titan, 2017+) - Body-on-Frame RWD/4WD
CAN Architecture Nissan CAN (AV-CAN / MS-CAN / LIN); OBD2 DLC ISO 15765-4 CAN 500kbps
Security Nissan NATS5 / NVIS IMMO5; no OBD pin extraction; AKL via CONSULT + ASIST; max 4 I-Keys

Get a Quote See Supported Modules

What do you need fixed?

Choose a service to start your quote.

Fix my ECUEngine computer Fix my TCMTransmission computer Repair my BCMBody electronics Code my vehicleCustom coding Repair a moduleElectronic module repair

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2016 Nissan Titan. On this vehicle we cover documented systems include Intelligent Emergency Braking - Forward Camera, Front Radar (IEB - if equipped), and Around View Monitor (AVM), this A61 (3rd Gen Titan, 2017+) - Body-on-Frame RWD/4WD platform vehicle, NATS / I-Key immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.

Platform

A61 (3rd Gen Titan, 2017+) - Body-on-Frame RWD/4WD

Production

2004-present

Trim Levels

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Drivetrain

RWD / 4WD

Engine

CAN Speed

Nissan CAN (AV-CAN / MS-CAN / LIN); OBD2 DLC ISO 15765-4 CAN 500kbps

YEAR-SPECIFIC NOTES

VIN / Build Split

VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.

SERVICE SNAPSHOT

Exact-year service summary for 2016 Nissan Titan

ADAS coverage

This 2016 Nissan Titan page documents 4 ADAS systems, including Intelligent Emergency Braking - Forward Camera, Front Radar (IEB - if equipped), Around View Monitor (AVM), and BSD Radar (if equipped).

View ADAS data

Calibration triggers

Documented calibration triggers include Windshield or forward-camera replacement, Front bumper, grille, or radar service, BCM/IPDM, key, or immobilizer module replacement, and ABS/VDC, steering-angle, or suspension service. Use the ADAS tab for the full trigger list.

View triggers

Programmable modules

This page indexes 13 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

This page includes 3 gateway, immobilizer, or key-security records for this 2016 Nissan Titan.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2016 Nissan Titan using the documented systems and module data on this page.

Choose a section

EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Platform: Titan generation transition row; verify A60/A61 build by VIN - Verify by VIN; NATS/NVIS / Intelligent Key equipment - Verify by VIN; Driver-assist and camera systems - if equipped - Verify by VIN

Driver-assist suite

Driver-assist equipment varies by year, trim, package, and build. Verify forward camera, radar, sonar, blind-spot, and parking-camera hardware by VIN before calibration. Do not apply newer-generation Nissan ProPILOT/Safety Shield package procedures unless the VIN confirms that equipment.

VIN and build split

VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.

Infotainment context

9" NissanConnect; Apple CarPlay + Android Auto standard; wireless CarPlay on Platinum

Network and access

CAN: Nissan CAN (AV-CAN / MS-CAN / LIN); OBD2 DLC ISO 15765-4 CAN 500kbps

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Nissan CONSULT-III Plus

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2016 Nissan Titan. Counts reflect modules our techs have programmed or calibrated on this exact platform.

ADAS Calibration

4 modules documented

Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.

Open ADAS tab

Engine / ECU Programming

3 modules documented

Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.

Open Modules tab

BCM / Body Programming

1 module documented

Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.

Open Modules tab

Gateway / Security Access

1 module documented

Secure gateway module identification, bypass workflow and security-access planning before programming.

Open Security tab

TCU / Transmission

1 module documented

Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.

Open Modules tab

SRS / Airbag Reset

2 modules documented

Crash-data clear, hard-code reset and replacement airbag module configuration.

Open Modules tab

ABS / Brake Module

1 module documented

ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.

Open Modules tab

IPC, SAS & Other Modules

3 modules documented

Instrument cluster cloning, steering angle sensor calibration and other supporting modules.

Open Modules tab

Connectivity & Accessories

2 modules documented

Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.

Open Modules tab

Recalibration Triggers

4 modules documented

Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.

Open ADAS tab

Need something not listed? Most undocumented modules can still be programmed.

Get a Quote

Feature availability 3

Platform: Titan generation transition row; verify A60/A61 build by VIN

Verify by VIN

Use model-year and VIN-specific Nissan service information when cross-referencing parts.

NATS/NVIS / Intelligent Key equipment

Verify by VIN

Use CONSULT/ASIST security and option-configuration procedures for module or key replacement.

Driver-assist and camera systems - if equipped

Verify by VIN

Calibrate only with the procedure and targets for the exact model year, trim, and build.

WHAT WE RESOLVE

Common issues on this vehicle

Common Nissan Titan issues we resolve on this platform: Intelligent Emergency Braking - Forward Camera, Front Radar (IEB - if equipped), Around View Monitor (AVM), and BSD Radar (if equipped) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - A61 (3rd Gen Titan, 2017+) - Body-on-Frame RWD/4WD platform uses Nissan CAN (AV-CAN / MS-CAN / LIN); OBD2 DLC ISO 15765-4 CAN 500kbps.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Scroll for part numbers and Details

System	Type	Category	Cal. Type	Supported	Part #
Intelligent Emergency Braking - Forward Camera	Forward Camera	Camera	Static	YES	-
Front Radar (IEB - if equipped)	Front Radar	Radar	Static	YES	-
Around View Monitor (AVM)	Surround Camera	Camera	Static	YES	-
BSD Radar (if equipped)	Side Radar	Radar	Static + Dynamic	YES	-

WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

Windshield or forward-camera replacement Affected: Forward camera/lane camera, AEB/LDW/ICC systems if equipped

Verify camera presence and run the Nissan alignment routine for the exact VIN after glass, camera, bracket, or related trim work.

Front bumper, grille, or radar service Affected: Forward radar, ICC/AEB, sonar, parking sensors if equipped

Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.

BCM/IPDM, key, or immobilizer module replacement Affected: BCM, IPDM, NATS/NVIS, Intelligent Key, RKE, alarm

Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.

ABS/VDC, steering-angle, or suspension service Affected: ABS/VDC, steering angle, yaw/lateral sensors, ADAS aim if equipped

Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.

SRS Modules

SRS Control Unit 87650ZR58A

Part number: 87650ZR58A
Location: Under center console
Manufacturer: Continental
Notes: Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.

Request help with this module

SRS Control Unit 985109GE9B

Part number: 985109GE9B
Location: Under center console
Manufacturer: Continental
Notes: Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.

Request help with this module

ECU Modules

ECM - 5.6L VK56VD V8 ~23710-9FT (VERIFY 2018 SUFFIX)

Part number: ~23710-9FT (VERIFY 2018 SUFFIX)
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Hitachi/Renesas
Notes: CONSULT flash + VIN + NATS5 sync. Throttle body learn + idle air volume learn. NATS lamp out before test drive.

Request help with this module

ECM - Cummins 5.0L Diesel (Titan XD only) ASIST - XD DIESEL 2018)

Part number: ASIST - XD DIESEL 2018)
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Cummins ECM
Notes: Titan XD diesel only. CONSULT Cummins-specific calibration file via ASIST. Not interchangeable with VK56VD ECM.

Request help with this module

TCM - RE7R01B 7-Speed AT ~31036-9FT

Part number: ~31036-9FT
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Jatco 7AT
Notes: CONSULT TCM flash + adaptive reset. 300-mile relearn. Matic-S ATF.

Request help with this module

BCM Modules

TCU / TCM Transmission Modules

TCU - 9NR 9-Speed Auto 31036-EZ30A

Part number: 31036-EZ30A
Protocol / method: J2534
Coding required: Yes
Cloning supported: No
Chip / MCU: Renesas RH850
Notes: New generation with Jatco 9-speed (RE7R01B). Requires Consult III+ for programming. Nissan ATF Matic W fluid. VIN coding required. Transmission relearn via drive cycle.

Request help with this module

ABS / Brake Modules

ABS/VDC/ESC Module - VIN-specific

Cloning supported: Yes
Notes: Run CONSULT initialization, steering-angle/yaw zero-point, brake bleed, and road-test steps required by the exact build.

Request help with this module

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) 24810-EZ30A

Part number: 24810-EZ30A
Cloning supported: Yes
Notes: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Request help with this module

Steering Angle Sensor (SAS)

Coding required: Yes
Notes: INTEGRATED (clock spring / steering column module

Request help with this module

Steering Angle Sensor (SAS)

Coding required: Yes
Notes: cross-year extension)

Request help with this module

Connectivity & Accessories

Around View Monitor System (AVM) ASIST - A61 SL

Part number: ASIST - A61 SL
Notes: Optional SL/Platinum 2017. Full 4-camera mat calibration required via CONSULT after any camera or AVM ECU replacement. See rep_adas for detailed procedure.

Request help with this module

Trailer Brake Controller (if equipped) ASIST - A61)

Part number: ASIST - A61)
Notes: CONSULT body system check after TBC replacement. Verify trailer brake output via CONSULT live data. A61 Titan max trailer rating 9,660 lbs (verify by trim/config).

Request help with this module

Gateway / Security Modules

Central Gateway Module

Manufacturer: NXP / Freescale
Security: VIN-locked (UDS)
VIN locked: Yes
Coding required: Yes
Chip / MCU: MPC5606BK
Notes: Compatibility label: X-TRAIL. BCM Notes: Read/Write

Request help with this module

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction: A61 Body-on-Frame - High-Strength Steel Ladder Frame
OBD Protocol: ISO 15765-4 CAN (500 kbps)
CAN Architecture: Nissan CAN (AV-CAN / MS-CAN / LIN); OBD2 DLC ISO 15765-4 CAN 500kbps
Infotainment: 9" NissanConnect; Apple CarPlay + Android Auto standard; wireless CarPlay on Platinum
OTA Capable: No
ECU/TCM Unlocking: Contact us
ECU/TCM Flashing: Confirmed
Reviewed coverage: 2016 - 5.0L H61 (ISV5.0).
Confirm the exact engine, ECU, and any prerequisite access method before service.

FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2016 Nissan Titan?

ADAS calibration pricing for a 2016 Nissan Titan depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Intelligent Emergency Braking - Forward Camera, Front Radar (IEB - if equipped), Around View Monitor (AVM), and BSD Radar (if equipped). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2016 Nissan Titan?

Yes. The 2016 Nissan Titan uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 87650ZR58A. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2016 Nissan Titan?

After windshield replacement on a 2016 Nissan Titan, Intelligent Emergency Braking - Forward Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.

How long does a 2016 Nissan Titan module service take?

Most 2016 Nissan Titan onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 13 programmable modules documented in our database (3 ECU, 1 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.

Do you cover the 2016 Nissan Titan on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2016 Nissan Titan. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2016 Nissan Titan programming?

Every programming, cloning, and calibration job on the 2016 Nissan Titan is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Which modules on a 2016 Nissan Titan can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2016 Nissan Titan. For this vehicle our database documents:

3 engine control (ECU/PCM)
1 transmission control (TCU/TCM)
1 body control (BCM and related)
1 ABS / brake control (EBCM)
1 immobilizer / security
1 key & fob
1 instrument cluster (IPC)
2 steering angle sensor (SAS)
4 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

OTHER MODEL YEARS

2026 2025 2024 2023 2022 2021 2020 2019 2018 2017 2016

OTHER NISSAN MODELS

Rogue Altima Sentra Frontier Pathfinder Armada Versa Maxima

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2016 Nissan Titan covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ADAS Module Part Numbers: 28438-EZ30A
ECU / PCM Part Numbers: 23703-EZ30A, 23703-EZ30B
TCU / TCM Part Numbers: 31036-EZ30A
SRS / Airbag Module Part Numbers: 87650ZR58A, 985109GE9B
ABS / EBCM Part Numbers: 47660-EZ30A
Instrument Cluster (IPC) Part Numbers: 24810-EZ30A
Transmission Control Module (TCM) Part Numbers: 31036-EZ30A

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.