Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2023 Nissan Ariya Supported Services

2023 Nissan Ariya

ADAS calibration, module programming, and security relearns

Engage, Evolve, Empower, Premiere trims. Single-motor FWD or dual-motor e-4ORCE AWD. Battery: 63 kWh or 87 kWh.

Technical snapshot
  • Platform Nissan CMF-EV (dedicated EV architecture)
  • CAN Architecture HS-CAN + CANFD; Nissan CMF-EV network; OBD2 DLC Pin 6/14
  • Security Nissan Intelligent Key PEPS; UHF + NFC digital key; rolling code; CONSULT III Plus

What do you need fixed?

Choose a service to start your quote.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2023 Nissan Ariya. On this vehicle we cover documented systems include Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, and Blind Spot Monitor Sensor - Left (BSM), this Nissan CMF-EV (dedicated EV architecture) platform vehicle, Nissan IMMU Gen 4 EV; CMF-EV security gateway immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.

Platform
Nissan CMF-EV (dedicated EV architecture)
Production
2023-present
Trim Levels
Engage, Evolve, Empower, Premiere trims. Single-motor FWD or dual-motor e-4ORCE AWD. Battery: 63 kWh or 87 kWh.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN + CANFD; Nissan CMF-EV network; OBD2 DLC Pin 6/14
SERVICE SNAPSHOT

Exact-year service summary for 2023 Nissan Ariya

ADAS coverage

This 2023 Nissan Ariya page documents 7 ADAS systems, including Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).

View ADAS data

Calibration triggers

Documented calibration triggers include ABS/VDC Module Replacement, Windshield Replacement, Front Bumper/Radar Service, and Rear Bumper/Radar Service. Use the ADAS tab for the full trigger list.

View triggers

Programmable modules

This page indexes 23 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

This page includes 3 gateway, immobilizer, or key-security records for this 2023 Nissan Ariya.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2023 Nissan Ariya using the documented systems and module data on this page.

Choose a section
EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Nissan ProPilot Assist 2.0 (hands-free on expressways): Adaptive Cruise, Lane Ce - Available; OTA Software Updates - Available; Platform: Nissan CMF-EV (dedicated EV architecture) - Confirmed

Driver-assist suite

Nissan ProPilot Assist 2.0 (hands-free on expressways): Adaptive Cruise, Lane Centering, Blind Spot, Rear Cross Traffic, Automatic Emergency Braking, Intelligent Around View Monitor

Infotainment context

12.3" touchscreen + 12.3" digital cluster; dual-zone OTA; wireless CarPlay/Android Auto

Network and access

CAN: HS-CAN + CANFD; Nissan CMF-EV network; OBD2 DLC Pin 6/14

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Nissan CONSULT-III Plus

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2023 Nissan Ariya. Counts reflect modules our techs have programmed or calibrated on this exact platform.

ADAS Calibration
7 modules documented

Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.

Open ADAS tab
Engine / ECU Programming
3 modules documented

Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.

Open Modules tab
BCM / Body Programming
3 modules documented

Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.

Open Modules tab
Gateway / Security Access
1 module documented

Secure gateway module identification, bypass workflow and security-access planning before programming.

Open Security tab
TCU / Transmission
2 modules documented

Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.

Open Modules tab
SRS / Airbag Reset
6 modules documented

Crash-data clear, hard-code reset and replacement airbag module configuration.

Open Modules tab
ABS / Brake Module
3 modules documented

ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.

Open Modules tab
IPC, SAS & Other Modules
2 modules documented

Instrument cluster cloning, steering angle sensor calibration and other supporting modules.

Open Modules tab
Connectivity & Accessories
4 modules documented

Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.

Open Modules tab
Recalibration Triggers
5 modules documented

Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.

Open ADAS tab

Need something not listed? Most undocumented modules can still be programmed.

Get a Quote
Feature availability 3

Nissan ProPilot Assist 2.0 (hands-free on expressways): Adaptive Cruise, Lane Ce

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

OTA Software Updates

Available

Check for pending OTA updates before any module programming session. OTA and dealer flash may conflict.

Platform: Nissan CMF-EV (dedicated EV architecture)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Nissan Ariya issues we resolve on this platform: Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Nissan CMF-EV (dedicated EV architecture) platform uses HS-CAN + CANFD; Nissan CMF-EV network; OBD2 DLC Pin 6/14.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Nissan ProPilot Assist 2.0 (hands-free on expressways): Adaptive Cruise, Lane Centering, Blind Spot, Rear Cross Traffic, Automatic Emergency Braking, Intelligent Around View Monitor

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Safety Shield 360 Forward Camera (Mobileye EyeQ4)Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEBFront RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM)Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM)Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC)Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° SurroundSurround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic SensorsParking SensorUltrasonicNone YES-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

ABS/VDC Module Replacement

CONSULT ABS bleed + VDC sensor reset. EV powertrain integration - verify e-4ORCE AWD function on AWD variants.

Windshield Replacement

ProPilot Assist 2.0 forward camera (windshield-mounted) requires recalibration via CONSULT-III+.

Front Bumper/Radar Service

Front radar recalibration required after front bumper or radar service.

Rear Bumper/Radar Service

Rear cross-traffic radar recalibration after rear bumper work.

Steering Angle Sensor Replacement/Reset

ProPilot Assist 2.0 lane centering requires steering angle sensor calibration.

SRS Modules

SRS Control Unit K8820-5MR0B
Part number
K8820-5MR0B
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit K8820-5MR0C
Part number
K8820-5MR0C
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit K8820-5MR0D
Part number
K8820-5MR0D
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit K8820-5MV0B
Part number
K8820-5MV0B
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit K8820-5MV0C
Part number
K8820-5MV0C
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit K8820-5MV1A
Part number
K8820-5MV1A
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.

ECU Modules

Engine Control Module (ECM)
Protocol / method
OBD
Security
NATS 7 / AES-128
Coding required
Yes
Cloning supported
No
Notes
ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Online server authentication required. Cloning not supported on 2018+ VIN-locked units.
Transmission Control Module (TCM)
Protocol / method
OBD
Security
NATS 7 / AES-128
Coding required
Yes
Cloning supported
No
Notes
TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning not supported.
Body Control Module (BCM)
Protocol / method
OBD
Security
NATS 7 / AES-128
Coding required
Yes
Cloning supported
No
Notes
BCM requires coding to vehicle VIN after replacement. Security gateway access required on 2018+ models. All comfort/convenience modules must be re-synced via our diagnostic software.

BCM Modules

Body Control Module (BCM) ~(VERIFY VIA CONSULT FOR ARIYA 2023)
Part number
~(VERIFY VIA CONSULT FOR ARIYA 2023)
Notes
CONSULT-III Plus required for ARIYA 2023 BCM programming. Ariya uses CAN FD architecture - verify CONSULT software version supports CAN FD before attempting programming. BCM controls lighting, door locks, charge port lock, HV interlock relay, and ProPILOT body functions. VIN registration and full option code programming required. Verify all body and EV-specific functions post-replacement.
Intelligent Key ECU (NATS 7 / AES) ~(VERIFY VIA CONSULT FOR ARIYA 2023)
Part number
~(VERIFY VIA CONSULT FOR ARIYA 2023)
Notes
CONSULT-III Plus + ASIST authorization required. Ariya uses NATS 7 with AES-128 encryption - standard bypass not possible. All registered keys erased on replacement. Maximum 4 Intelligent Keys. Verify ProPILOT drive enable and push-button start after programming.
Charge Port Control Unit (CPCU)
Notes
CONSULT EV diagnostics required after CPCU or charge port replacement. Verify CHAdeMO and/or CCS2 DC fast charge communication with VCM. Check HV interlock and charge port lock actuator function after repair.

TCU / TCM Transmission Modules

N/A - Single Speed / No TCU
Protocol / method
Virgin Flash
Coding required
No
Cloning supported
No
Chip / MCU
N/A
Notes
Pure EV with single-speed reducer, no traditional TCU/TCM present
N/A - Single Speed / No TCU
Protocol / method
Virgin
Coding required
No
Cloning supported
No
Chip / MCU
N/A
Notes
Pure EV with single-speed reducer, no traditional TCU/TCM present

ABS / Brake Modules

ABS Actuator and Electric Unit (Control Unit)
Notes
Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each)
Notes
Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each)
Notes
Active sensor.

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) 24809-5MR0C
Part number
24809-5MR0C
Cloning supported
Yes
Notes
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
INTEGRATED (spiral cable 25554 family)

Connectivity & Accessories

12.3" touchscreen + 12.3" digital cluster
Notes
Programming required after replacement. Verify software version compatibility before install.
Remote Start
Notes
Factory remote start. BCM configuration required after replacement on equipped vehicles.
HV Battery Management System
Notes
High-voltage safety protocols required. De-energize HV system before any service. Manufacturer scan tool required for HV diagnostics.
Onboard Charger Module
Notes
L1/L2 AC charging module. Programming required after replacement to restore charge profiles.

Gateway / Security Modules

Central Gateway Module
Manufacturer
NXP / Freescale
Security
VIN-locked (UDS)
VIN locked
Yes
Coding required
Yes
Chip / MCU
MPC5606BK
Notes
Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
High-strength steel unibody; aluminum hood and liftgate
OBD Protocol
ISO 15765-4 CAN (500 kbps)
CAN Architecture
HS-CAN + CANFD; Nissan CMF-EV network; OBD2 DLC Pin 6/14
Infotainment
12.3" touchscreen + 12.3" digital cluster; dual-zone OTA; wireless CarPlay/Android Auto
OTA Capable
Yes
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Contact us
OPENPILOT / COMMA.AI

Openpilot Compatibility

Not Supported

Not supported - EV not in openpilot tree

Not in openpilot support tree as of April 2026. Ariya not ported.

FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2023 Nissan Ariya?

ADAS calibration pricing for a 2023 Nissan Ariya depends on which of its 7 documented systems need work after a repair. This vehicle is documented with Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear View Camera (RVC). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2023 Nissan Ariya?

Yes. The 2023 Nissan Ariya uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: K8820-5MR0B. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2023 Nissan Ariya?

After windshield replacement on a 2023 Nissan Ariya, Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, and Rear View Camera (RVC) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.

How long does a 2023 Nissan Ariya module service take?

Most 2023 Nissan Ariya onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 18 programmable modules documented in our database (3 ECU, 3 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.

Do you cover the 2023 Nissan Ariya on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2023 Nissan Ariya. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2023 Nissan Ariya programming?

Every programming, cloning, and calibration job on the 2023 Nissan Ariya is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Which modules on a 2023 Nissan Ariya can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2023 Nissan Ariya. For this vehicle our database documents:

  • 3 engine control (ECU/PCM)
  • 1 transmission control (TCU/TCM)
  • 3 body control (BCM and related)
  • 3 ABS / brake control (EBCM)
  • 1 immobilizer / security
  • 1 key & fob
  • 1 instrument cluster (IPC)
  • 1 steering angle sensor (SAS)
  • 7 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2023 Nissan Ariya covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ADAS Module Part Numbers
284F1-5MP0A, 28437-5MT2A, 284N0-5MP4C, 28437-5MT5A
ECU / PCM Part Numbers
237D0-5MP, 237D6-5MP0A COVER CONFIRMS 5MP PLATFORM CODE (VERIFY EXACT VCM SUFFIX VIA CONSULT)
BCM / Body Module Part Numbers
~(VERIFY VIA CONSULT FOR ARIYA 2023), CCS2)
SRS / Airbag Module Part Numbers
K8820-5MR0B, K8820-5MR0C, K8820-5MR0D, K8820-5MV0B, K8820-5MV0C, K8820-5MV1A
ABS / EBCM Part Numbers
47660-6MW0A
Instrument Cluster (IPC) Part Numbers
24809-5MR0C
Steering Angle Sensor (SAS) Part Numbers
INTEGRATED (SPIRAL CABLE 25554 FAMILY)

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

(945) 382-4065 Get a Quote

Shared module fitment

Vehicles sharing modules with the 2023 Nissan Ariya

These vehicles use one or more of the same replacement modules indexed for this vehicle.

Finish the repair

Need help finishing this repair?

Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.