VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2015 Mitsubishi Outlander Supported Services
2015 Mitsubishi Outlander
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform ZM (4th gen - Nissan CMF-CD shared)
- CAN Architecture CAN-B, CAN-C, EV-CAN (PHEV), Ethernet (multimedia)
- Security Mitsubishi ETACS transponder immobilizer
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2015 Mitsubishi Outlander. On this vehicle we cover documented systems include Forward Collision Mitigation (FCM) - Radar + Camera, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Blind Spot Warning (BSW), this ZM (4th gen - Nissan CMF-CD shared) platform vehicle, ETACS Immobilizer immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
ZM (4th gen - Nissan CMF-CD shared)
Production
2007-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
CAN-B, CAN-C, EV-CAN (PHEV), Ethernet (multimedia)
YEAR-SPECIFIC NOTES
Exact-year service summary for 2015 Mitsubishi Outlander
ADAS coverage
This 2015 Mitsubishi Outlander page documents 4 ADAS systems, including Forward Collision Mitigation (FCM) - Radar + Camera, Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Warning (BSW), and Rear Auto Brake (RAB).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair, and Any Module Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 13 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2015 Mitsubishi Outlander.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2015 Mitsubishi Outlander using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Mi-Pilot Assist: Forward Collision Mitigation, Lane Departure Warning/Lane Keepi - Available; Platform: ZM (4th gen - Confirmed
Driver-assist suite
Mi-Pilot Assist: Forward Collision Mitigation, Lane Departure Warning/Lane Keeping Assist, Blind Spot Warning, Rear Cross-Traffic Alert, Rear Automatic Braking, Adaptive Cruise
VIN and build split
VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code.
Infotainment context
Mitsubishi Connect - 9" or 12.3" display
Network and access
CAN: CAN-B, CAN-C, EV-CAN (PHEV), Ethernet (multimedia)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Mitsubishi MUT-III SE
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2015 Mitsubishi Outlander. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
4 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
2 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
1 module documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
5 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Mi-Pilot Assist: Forward Collision Mitigation, Lane Departure Warning/Lane Keepi
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: ZM (4th gen
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Mitsubishi Outlander issues we resolve on this platform: Forward Collision Mitigation (FCM) - Radar + Camera, Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Warning (BSW), and Rear Auto Brake (RAB) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - ZM (4th gen - Nissan CMF-CD shared) platform uses CAN-B, CAN-C, EV-CAN (PHEV), Ethernet (multimedia).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Mi-Pilot Assist: Forward Collision Mitigation, Lane Departure Warning/Lane Keeping Assist, Blind Spot Warning, Rear Cross-Traffic Alert, Rear Automatic Braking, Adaptive Cruise
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Collision Mitigation (FCM) - Radar + Camera | Fused (Radar + Camera) | Fused | Static | YES | 8750A946 | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) | Forward Camera | Camera | Static | YES | 8750A946 | |
| Blind Spot Warning (BSW) | Side Radar | Radar | Static + Dynamic | YES | 8750A930 | |
| Rear Auto Brake (RAB) | Rear Camera + Radar | Fused | Static | YES | 8750A931 |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: FCM Camera / LDW-LKA Camera
MUT-III static calibration required - shared camera covers FCM and LDW/LKA. Calibration target required. OEM windshield spec mandatory.
Front Bumper Repair or Replacement Affected: FCM Radar
MUT-III radar calibration required if front bumper or radar mount disturbed.
Rear Bumper Repair Affected: BSW Sensors, RAB System
MUT-III coding if BSW sensors replaced. RAB calibration if rear sensor disturbed.
Any Module Replacement Affected: ECM, ETACS, SRS-ECU, ABS
MUT-III VIN coding mandatory. ECM-ETACS sync required. ZM part numbers - do not use GF/GG references.
PHEV HV System Service Affected: HV ECU, BMS, EV Motor ECU
MUT-III HV authorization required for ZM PHEV. Larger battery than previous gen - additional HV precautions apply.
SRS Modules
SRS Electronic Control Unit (SRS-ECU) 7030B006XA
- Part number
- 7030B006XA
- Location
- Under center console
- Manufacturer
- Mitsubishi Electric
- Notes
- Requires MUT-III or compatible scan tool for SRS-ECU reset. Battery disconnect and 60-second wait before removal. DTC B1400 common post-crash.
ECU Modules
ECM - 2.5L 4B12 MIVEC (ZM) 1860A900
- Part number
- 1860A900
- Protocol / method
- MUT-III Programming
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Denso SH72xx
- Notes
- ZM gen uses revised 2.5L engine. MUT-III programming required. ECM-ETACS immobilizer sync mandatory. New part numbers vs GF/GG.
ECM/HV ECU - PHEV (Outlander PHEV ZM) 1860A901
- Part number
- 1860A901
- Protocol / method
- MUT-III Programming
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Denso SH72xx + HV ECU
- Notes
- ZM PHEV has significantly larger battery pack than GF/GG PHEV. MUT-III HV authorization required. EV CAN bus separate from standard CAN. Clone not supported. Full HV tech training required.
BCM Modules
ETACS / BCM (ZM platform) 8637A629
- Part number
- 8637A629
- Security
- mitsu_coded
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- ZM ETACS/BCM - MUT-III coding required. Manages body electrical, AWD interaction, and immobilizer. Clone supported.
TCU / TCM Transmission Modules
TCU - CVT F1CJA Continuously Variable Transmission 8631A454
- Part number
- 8631A454
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires MUT-III for initial programming and adaptation. CVT relearn procedure mandatory after installation. Use Diamond SP-III ATF fluid only.
TCU - CVT F1CJB Continuously Variable Transmission 8631A455
- Part number
- 8631A455
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Updated variant for 2015 model year. Requires MUT-III programming and CVT adaptation. Diamond SP-III ATF specification required.
ABS / Brake Modules
ABS/ASC Module (ZM) 4670A529
- Part number
- 4670A529
- Cloning supported
- Yes
- Notes
- MUT-III coding required. ZM gen part numbers - do not cross-reference GF/GG ABS parts.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 8100A-420
- Part number
- 8100A-420
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 8100A-421
- Part number
- 8100A-421
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Head Unit - Mitsubishi Connect Display Audio 8750A910
- Part number
- 8750A910
- Notes
- MUT-III coding required on ZM platform. 9-inch or 12.3-inch depending on trim. Wireless Apple CarPlay/Android Auto available.
Multi Around Monitor (360 Camera) 8750A915
- Part number
- 8750A915
- Notes
- MUT-III coding and camera calibration required on ZM. Higher resolution cameras vs GF/GG.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel unibody - new ZM architecture
- OBD Protocol
- ISO 15765-4 CAN
- CAN Architecture
- CAN-B, CAN-C, EV-CAN (PHEV), Ethernet (multimedia)
- Infotainment
- Mitsubishi Connect - 9" or 12.3" display
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2015 - 2.0L 16v (4B11), 2.0L 16v (4J11), 2.2L 16v DI-D (4N14), 2.2L TD (4N14), 2.3L 220 DI-D (4N14), 2.4L 16V HYBRID (4B12 I4), 2.4L 16v (4G63), 2.4L 16v 4WD (4G63), 3.0L 24V (6B31).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2015 Mitsubishi Outlander?
ADAS calibration pricing for a 2015 Mitsubishi Outlander depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Forward Collision Mitigation (FCM) - Radar + Camera, Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Warning (BSW), and Rear Auto Brake (RAB). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2015 Mitsubishi Outlander?
Yes. The 2015 Mitsubishi Outlander uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 7030B006XA. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2015 Mitsubishi Outlander?
After windshield replacement on a 2015 Mitsubishi Outlander, Forward Collision Mitigation (FCM) - Radar + Camera and Lane Keep Assist / Lane Departure Warning (LKA/LDW) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2015 Mitsubishi Outlander module service take?
Most 2015 Mitsubishi Outlander onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 13 programmable modules documented in our database (2 ECU, 1 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2015 Mitsubishi Outlander on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2015 Mitsubishi Outlander. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2015 Mitsubishi Outlander programming?
Every programming, cloning, and calibration job on the 2015 Mitsubishi Outlander is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2015 Mitsubishi Outlander can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2015 Mitsubishi Outlander. For this vehicle our database documents:
- 2 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 4 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2015 Mitsubishi Outlander covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 8631A-150, 8631A-151
- ECU / PCM Part Numbers
- 1860A-720, 1860A-721
- BCM / Body Module Part Numbers
- 8637A629
- TCU / TCM Part Numbers
- 8631A454, 8631A455
- SRS / Airbag Module Part Numbers
- 7030B006XA
- ABS / EBCM Part Numbers
- 4670A-498, 4670A-499
- Instrument Cluster (IPC) Part Numbers
- 8100A-420, 8100A-421
- Transmission Control Module (TCM) Part Numbers
- 8631A454, 8631A455
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2015 Mitsubishi Outlander
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.