VIN / Build Split
VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2017 Mercedes-Benz C-Class Supported Services
2017 Mercedes-Benz C-Class
ADAS calibration, module programming, and security relearns
Trims: C 300, C 300 4MATIC, AMG C 43, AMG C 63. All include standard ADAS suite.
Technical snapshot
- Platform W206
- CAN Architecture MB proprietary CAN-C, CAN-B, MOST150 (media), 48V bus (BSG), Automotive Ethernet (MBUX)
- Security MB EIS + ISM + ECM triad (+ BSG ECU on C300) - dealer SCN authorization required; Digital Key NFC on equipped builds
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2017 Mercedes Benz C-Class. On this vehicle we cover documented systems include PRE-SAFE Brake (Automatic Emergency Braking), Forward Camera (Monocular) - MFC, and Distronic Plus - Adaptive Cruise Control (ACC), this W206 platform vehicle, EIS/EZS immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
W206
Production
2008-present
Trim Levels
Trims: C 300, C 300 4MATIC, AMG C 43, AMG C 63. All include standard ADAS suite.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
MB proprietary CAN-C, CAN-B, MOST150 (media), 48V bus (BSG), Automotive Ethernet (MBUX)
YEAR-SPECIFIC NOTES
Exact-year service summary for 2017 Mercedes Benz C-Class
ADAS coverage
This 2017 Mercedes Benz C-Class page documents 6 ADAS systems, including PRE-SAFE Brake (Automatic Emergency Braking), Forward Camera (Monocular) - MFC, Distronic Plus - Adaptive Cruise Control (ACC), and Active Lane Keep Assist / LDW (LKA/LDW).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 45 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 11 gateway, immobilizer, or key-security records for this 2017 Mercedes Benz C-Class.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2017 Mercedes Benz C-Class using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Mercedes-Benz Driving Assistance Package: DISTRONIC Adaptive Cruise Control, Act - Available; Platform: W206 - Confirmed
Driver-assist suite
Mercedes-Benz Driving Assistance Package: DISTRONIC Adaptive Cruise Control, Active Lane Keep, BAS PLUS, PRE-SAFE - package on most models
VIN and build split
VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.
Infotainment context
MBUX 2nd Generation - 11.9 inch portrait central display + 12.3 inch digital cluster
Network and access
CAN: MB proprietary CAN-C, CAN-B, MOST150 (media), 48V bus (BSG), Automotive Ethernet (MBUX)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Mercedes XENTRY Diagnosis / Mercedes DAS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2017 Mercedes-Benz C-Class. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
8 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
3 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
29 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
3 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
10 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Mercedes-Benz Driving Assistance Package: DISTRONIC Adaptive Cruise Control, Act
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: W206
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Mercedes Benz C-Class issues we resolve on this platform: PRE-SAFE Brake (Automatic Emergency Braking), Forward Camera (Monocular) - MFC, Distronic Plus - Adaptive Cruise Control (ACC), and Active Lane Keep Assist / LDW (LKA/LDW) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - W206 platform uses MB proprietary CAN-C, CAN-B, MOST150 (media), 48V bus (BSG), Automotive Ethernet (MBUX).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Mercedes-Benz Driving Assistance Package: DISTRONIC Adaptive Cruise Control, Active Lane Keep, BAS PLUS, PRE-SAFE - package on most models
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| PRE-SAFE Brake (Automatic Emergency Braking) | Front Radar | Radar | Static | YES | 000-900-26-00 | |
| Forward Camera (Monocular) - MFC | Forward Camera | Camera | Static | YES | 000-900-97-12 | |
| Distronic Plus - Adaptive Cruise Control (ACC) | Front Radar | Radar | Static | YES | 000-900-26-00 | |
| Active Lane Keep Assist / LDW (LKA/LDW) | Forward Camera | Camera | Static | YES | 000-900-97-12 | |
| Blind Spot Assist / Rear Cross-Traffic Alert | Side Radar | Radar | Static + Dynamic | YES | 000-900-36-00 (L), 000-900-37-00 (R) | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Front Multi-Purpose Camera, Active Distance Assist, Active Lane Change Assist, Pre-Safe, AEB
our diagnostic software static calibration with MB W206 target board - confirm W206 procedure, not W205. MB-approved glass required. module coding confirmation before calibration. MBUX driving assist display confirm active post-calibration.
Front Bumper Repair or Replacement Affected: Front Long-Range Radar, Active Distance Assist, Pre-Safe, AEB
Static radar alignment using our diagnostic software. Vehicle at curb weight on level surface. Inspect radar bracket.
Rear Bumper Repair or Replacement Affected: Blind Spot Assist, Rear Cross-Traffic Alert, PARKTRONIC rear sensors
BSD rear radar module coding confirmation. Rear Parktronic sensor resistance check.
Any Collision Affected: ACU, front camera, front radar, BSD radars, Pre-Safe Sound, all deployed airbag circuits
Full our diagnostic software scan mandatory. ACU replace-only. Pre-Safe Sound system check post-repair. Camera and radar alignment if front end disturbed.
48V Mild Hybrid System Service Affected: BSG ECU, 48V battery, ESP regenerative braking coordination
48V system service with appropriate dual-rail charger. BSG ECU module coding after replacement. ESP adaptation required.
Any Module Replacement Affected: All SCN-coded modules
online coding coding required using our diagnostic software. MB server authorization mandatory. EIS replacement triggers full synchronization chain.
Forward Camera Replacement
Camera module replacement requires full recalibration using XENTRY.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using XENTRY.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using XENTRY.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use XENTRY if applicable.
SRS Modules
SRS Control Unit 14 records
Under center console
- Part number
- 0 285 011 400
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95320
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 16 07
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 18 14
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 25 12
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 85 00
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 85 18
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 86 00
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 86 18
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 94 27
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 95 27
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 96 27
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 97 27
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A205 900 98 27
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- 63040
- Location
- Under center console
- Manufacturer
- Bosch
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
SRS Control Unit (variant) 15 records
ECU Modules
ECM - M254 2.0L Mild Hybrid (C300) A254-906-89-01
- Part number
- A254-906-89-01
- Protocol / method
- XENTRY SCN Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 / MOTRONIC (M254 variant)
- Notes
- our diagnostic software SCN Online - MB server authorization mandatory. Synchronize EIS, ISM, BSG ECU after replacement. 48V calibrations included in SCN. Battery charger (12V + 48V) required during programming.
ECM - AMG C43 2.0L + EQ Boost (402hp) A206-900-43-01
- Part number
- A206-900-43-01
- Protocol / method
- XENTRY SCN Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 (AMG 4-cyl variant)
- Notes
- AMG-specific ECM. our diagnostic software online coding. Synchronize with EIS and ISM. AMG performance maps server-coded.
TCM - 9G-Tronic A725-271-00-03
- Part number
- A725-271-00-03
- Protocol / method
- XENTRY SCN Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- MB/ZF proprietary
- Notes
- our diagnostic software module coding required. Shift adaptation reset and drive cycle after programming.
BCM Modules
Front SAM (Signal Acquisition Module) A206-900-14-01
- Part number
- A206-900-14-01
- Security
- SCN Coding
- Coding required
- Yes
- Cloning supported
- No
- Notes
- online module coding mandatory. MB server authorization required. W206 SAM integrates MBUX and 48V mild hybrid comfort functions. No clone supported.
Electronic Ignition Switch (EIS) A206-905-26-01
- Part number
- A206-905-26-01
- Security
- mb_eis
- Coding required
- Yes
- Cloning supported
- No
- Notes
- our diagnostic software + professional service network authorization required. Synchronize with M254 ECM, ISM, and BSG ECU. AKL professional-only.
BSG ECU (48V Belt Starter Generator - C300 M254) A254-900-07-01
- Part number
- A254-900-07-01
- Security
- SCN Coding
- Coding required
- Yes
- Cloning supported
- No
- Notes
- 48V mild hybrid ECU. our diagnostic software module coding required. EQ Boost torque fill and regenerative braking. 48V system awareness - orange cables. Synchronize with EIS chain after replacement.
TCU / TCM Transmission Modules
TCU - 9G-TRONIC 9-Speed Auto A2059007
- Part number
- A2059007
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC297
- Notes
- Requires SCN coding, ATF MB-Approval 236.17, transmission adaptation via Xentry/DAS, gear learning procedure 20-30km mixed driving
TCU - 7G-TRONIC PLUS 7-Speed Auto A2125401
- Part number
- A2125401
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Legacy transmission in early 2017 models, requires SCN coding, ATF MB-Approval 236.15, Xentry programming and adaptation required
TCU - 6G-TRONIC 6-Speed Manual A2059008
- Part number
- A2059008
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental MPC5674
- Notes
- Manual transmission variant, clutch learning procedure required, DAS/Xentry programming mandatory, limited availability in North America
ABS / Brake Modules
ESP Module (W206) A206-431-06-12
- Part number
- A206-431-06-12
- Cloning supported
- No
- Notes
- module coding required after replacement. 48V regenerative braking coordination on mild hybrid models. Brake bleed and steering angle calibration using our diagnostic software.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) A2059000006
- Part number
- A2059000006
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
MBUX Central Display (11.9 inch portrait) A206-900-26-01
- Part number
- A206-900-26-01
- Notes
- module coding after replacement.
MBUX Instrument Display (12.3 inch digital) A206-900-56-01
- Part number
- A206-900-56-01
- Notes
- our diagnostic software module coding required. Mileage synchronization between cluster and EIS. Dealer authorization for mileage write.
Digital Key Module (NFC) A206-905-90-01
- Part number
- A206-905-90-01
- Notes
- Enables smartphone NFC digital key via MB ME app. module coding and MB account linking required. Physical smart key remains primary - digital key is supplemental.
Gateway / Security Modules
Central Gateway Module 8 records
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3373
- Notes
- Compatibility label: S400 W221. Door control box Notes: Read/Write
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A164. KG intelligent computer Notes: 315 MHz KG intelligent computer Notes: 433 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A166. KG intelligent computer Notes: 315 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A211. KG intelligent computer Notes: 433 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3624
- Notes
- Compatibility label: A212. KG intelligent computer Notes: 315 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3624
- Notes
- Compatibility label: C200 A212. KG intelligent computer Notes: Read/Write
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- KG intelligent computer Notes: Read/Write
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372(read-write)
- Notes
- Compatibility label: General model. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel unibody with extensive aluminum and high-strength steel mix
- OBD Protocol
- ISO 15765-4 CAN / MB XENTRY proprietary / Ethernet DoIP (W206)
- CAN Architecture
- MB proprietary CAN-C, CAN-B, MOST150 (media), 48V bus (BSG), Automotive Ethernet (MBUX)
- Infotainment
- MBUX 2nd Generation - 11.9 inch portrait central display + 12.3 inch digital cluster
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2017 Mercedes Benz C-Class?
ADAS calibration pricing for a 2017 Mercedes Benz C-Class depends on which of its 6 documented systems need work after a repair. This vehicle is documented with PRE-SAFE Brake (Automatic Emergency Braking), Forward Camera (Monocular) - MFC, Distronic Plus - Adaptive Cruise Control (ACC), Active Lane Keep Assist / LDW (LKA/LDW), and Blind Spot Assist / Rear Cross-Traffic Alert. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2017 Mercedes Benz C-Class?
Yes. The 2017 Mercedes Benz C-Class uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 0 285 011 400. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2017 Mercedes Benz C-Class?
After windshield replacement on a 2017 Mercedes Benz C-Class, PRE-SAFE Brake (Automatic Emergency Braking), Forward Camera (Monocular) - MFC, Active Lane Keep Assist / LDW (LKA/LDW), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2017 Mercedes Benz C-Class module service take?
Most 2017 Mercedes Benz C-Class onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 26 programmable modules documented in our database (3 ECU, 3 BCM, 3 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2017 Mercedes Benz C-Class on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2017 Mercedes Benz C-Class. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2017 Mercedes Benz C-Class programming?
Every programming, cloning, and calibration job on the 2017 Mercedes Benz C-Class is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2017 Mercedes Benz C-Class can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2017 Mercedes Benz C-Class. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 3 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 2 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 6 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2017 Mercedes-Benz C-Class covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- A0009007221
- ECU / PCM Part Numbers
- A2742001000
- BCM / Body Module Part Numbers
- A206-900-14-01, A206-905-26-01, A254-900-07-01
- TCU / TCM Part Numbers
- A2059007, A2125401, A2059008
- SRS / Airbag Module Part Numbers
- 0 285 011 400, A205 900 16 07, A205 900 18 14, A205 900 25 12, A205 900 85 00, A205 900 85 18, A205 900 86 00, A205 900 86 18, A205 900 94 27, A205 900 95 27, A205 900 96 27, A205 900 97 27, A205 900 98 27, 63040
- ABS / EBCM Part Numbers
- A0054314112
- Instrument Cluster (IPC) Part Numbers
- A2059000006
- Transmission Control Module (TCM) Part Numbers
- A2059007, A2125401, A2059008
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2017 Mercedes Benz C Class
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
XENTRY Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.