Choose a make, model and year, or start with a VIN.
ADAS calibration, module programming, and security relearns
Trims: C 300, C 300 4MATIC, AMG C 43, AMG C 63. All include standard ADAS suite.
Choose a service to start your quote.
This 2020 Mercedes Benz C-Class page documents 5 ADAS systems, including Front Multi-Purpose Camera (Driver Assistance Package Plus), Front Long-Range Radar (ACC / Pre-Safe), Blind Spot Assist / Rear Cross-Traffic Alert, and Active Parking Assist / Parktronic.
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 43 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 3 gateway, immobilizer, or key-security records for this 2020 Mercedes Benz C-Class.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2020 Mercedes Benz C-Class using the documented systems and module data on this page.
Choose a sectionVIN and build details determine exact service eligibility. A missing record does not mean we cannot help; ask about your vehicle.
VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.
Mercedes-Benz MBUX
CarPlay: Yes
Driver Assistance Package Plus - Available; Platform: W205 - Confirmed
Driver Assistance Package Plus - Active Brake Assist, Active Cruise, Lane Keeping, Blind Spot, Attention Assist
VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.
Mercedes-Benz MBUX; COMAND Online NTG5 S1
Wireless CarPlay: Yes
CAN: MB proprietary CAN-C (powertrain), CAN-B (body/comfort), MOST (media), FlexRay (chassis)
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Mercedes XENTRY Diagnosis / Mercedes DAS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
Documented module coverage for the 2020 Mercedes-Benz C-Class. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabPowertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBody control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTransmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabCrash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabInstrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabService events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Verify platform code matches when cross-referencing part numbers across model years.
Common Mercedes Benz C-Class issues we resolve on this platform: Front Multi-Purpose Camera (Driver Assistance Package Plus), Front Long-Range Radar (ACC / Pre-Safe), Blind Spot Assist / Rear Cross-Traffic Alert, and Active Parking Assist / Parktronic recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - W205 platform uses MB proprietary CAN-C (powertrain), CAN-B (body/comfort), MOST (media), FlexRay (chassis).
Driver Assistance Package Plus - Active Brake Assist, Active Cruise, Lane Keeping, Blind Spot, Attention Assist
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Front Multi-Purpose Camera (Driver Assistance Package Plus) | Forward Camera | Camera | Static | YES | A205-906-27-03 | |
| Front Long-Range Radar (ACC / Pre-Safe) | Front Radar | Radar | Static | YES | A205-906-67-03 | |
| Blind Spot Assist / Rear Cross-Traffic Alert | Side Radar | Radar | Static + Dynamic | YES | A205-906-49-03 (L), A205-906-50-03 (R) | |
| Active Parking Assist / Parktronic | Ultrasonic | Ultrasonic | Static | YES | - | |
| Rear View Camera | Rear Camera | Camera | Static | YES | A205-906-17-03 |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationour diagnostic software static camera calibration required using MB target board. MB-approved glass only. module coding of camera confirmed before calibration.
Radar static alignment using our diagnostic software. Vehicle at curb weight on level surface. Inspect radar bracket. module coding confirmation required.
BSD rear radar modules require module coding confirmation. Rear Parktronic sensor check recommended.
Full our diagnostic software scan mandatory. ACU replace-only - no crash data clear available. Camera and radar alignment required if front end disturbed.
online coding coding required using our diagnostic software. MB server authorization mandatory. EIS replacement triggers EIS/ISM/ECM synchronization.
Radar module replacement requires alignment/calibration using XENTRY.
Blind spot monitoring sensor replacement requires calibration using XENTRY.
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use XENTRY if applicable.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
Not supported - mercedes-benz not in openpilot support tree
Not in openpilot support tree as of April 2026. Mercedes-Benz not in openpilot support tree. Sprinter and passenger cars not ported.
ADAS calibration pricing for a 2020 Mercedes Benz C-Class depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Front Multi-Purpose Camera (Driver Assistance Package Plus), Front Long-Range Radar (ACC / Pre-Safe), Blind Spot Assist / Rear Cross-Traffic Alert, Active Parking Assist / Parktronic, and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Yes. The 2020 Mercedes Benz C-Class uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: A205 900 16 07. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
After windshield replacement on a 2020 Mercedes Benz C-Class, Front Multi-Purpose Camera (Driver Assistance Package Plus) and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
Most 2020 Mercedes Benz C-Class onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 17 programmable modules documented in our database (4 ECU, 3 BCM, 3 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2020 Mercedes Benz C-Class. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2020 Mercedes Benz C-Class is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
We program, clone, repair, or replace the full programmable-module stack on a 2020 Mercedes Benz C-Class. For this vehicle our database documents:
Infotainment on this platform: Mercedes-Benz MBUX. Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2020 Mercedes-Benz C-Class covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Matching catalog references
These pages list a matching part reference in the same module category. This does not confirm interchangeability. Verify the complete part number, suffix, VIN and build before selecting a replacement.
Factory diagnostic software is available. We confirm the appropriate software and supported procedure for your vehicle.
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible work.