VIN / Build Split
VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2010 Mercedes-Benz C-Class Supported Services
2010 Mercedes-Benz C-Class
ADAS calibration, module programming, and security relearns
Trims: C 300, C 300 4MATIC, AMG C 43, AMG C 63. All include standard ADAS suite.
Technical snapshot
- Platform W204 (4th Gen, 2008-2014)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Mercedes EIS/EZS (Electronic Ignition Switch) + IR transponder or DST+ chip; NEC MCU-based keys; XENTRY Diagnostics for add-key PIN; AKL requires XENTRY + NEC key code + EIS/EZS synchronization
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2010 Mercedes Benz C-Class. On this vehicle we cover documented systems include Rear View Camera (PARKTRONIC), PRE-SAFE® Brake - Forward Camera (Stereo), and PRE-SAFE® Brake - Forward Radar (77GHz), this W204 (4th Gen, 2008-2014) platform vehicle, FBS3 immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
W204 (4th Gen, 2008-2014)
Production
2008-present
Trim Levels
Trims: C 300, C 300 4MATIC, AMG C 43, AMG C 63. All include standard ADAS suite.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES
Exact-year service summary for 2010 Mercedes Benz C-Class
Electronic systems coverage
This 2010 Mercedes Benz C-Class page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systemsProgrammable modules
This page indexes 36 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 11 gateway, immobilizer, or key-security records for this 2010 Mercedes Benz C-Class.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2010 Mercedes Benz C-Class using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Platform: W204 (4th Gen, 2008-2014) - Confirmed
Driver-assist suite
No full ADAS suite - pre-Driving Assistance Package generation. Optional PRE-SAFE, DISTRONIC PLUS on upper trims/models.
VIN and build split
VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.
Infotainment context
Mercedes-Benz COMAND (NTG 4.0/4.5); 7" display; Bluetooth; CD/DVD; hard-drive navigation
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Mercedes XENTRY Diagnosis / Mercedes DAS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2010 Mercedes-Benz C-Class. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
1 module documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
2 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
8 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
4 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
20 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
3 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
Feature availability 1
Platform: W204 (4th Gen, 2008-2014)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Mercedes Benz C-Class issues we resolve on this platform: Rear View Camera (PARKTRONIC), PRE-SAFE® Brake - Forward Camera (Stereo), and PRE-SAFE® Brake - Forward Radar (77GHz) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - W204 (4th Gen, 2008-2014) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No full ADAS suite - pre-Driving Assistance Package generation. Optional PRE-SAFE, DISTRONIC PLUS on upper trims/models.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera (PARKTRONIC) | Camera | ADAS | Static | YES | - | |
| PRE-SAFE® Brake - Forward Camera (Stereo) | Camera | ADAS | Static | YES | - | |
| PRE-SAFE® Brake - Forward Radar (77GHz) | Radar | ADAS | Static + Dynamic | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM/ME Replacement
XENTRY SCN coding mandatory. VIN tie.
ABS/ESP Module Replacement
XENTRY variant coding + ESP reset function.
SRS Modules
SRS Control Unit 12 records
Under center console
- Part number
- 0 285 010 229
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95320
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- 0 285 011 400
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95320
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- 0285002894
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95640
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A204 820 22 85
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95640
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A204 820 22 85 (5WK44004)
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95640
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A204 870 68 26
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95640
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A204 870 68 26 (5WK44004)
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95640
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A204 870 94 26
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95640
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A204 870 94 26 (5WK44318)
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95640
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A204 901 27 04
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95640
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A204 901 27 04 (5WK44739)
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95640
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
Under center console
- Part number
- A204 901 28 04
- Location
- Under center console
- Manufacturer
- Bosch
- Chip / MCU
- 95640
- Notes
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
SRS Control Unit (variant) 8 records
ECU Modules
ECM/ME - 1.8L M271 I4 / 2.5L M272 V6 / 3.0L M272 V6 / 6.2L M156 V8 (year-dep)
- Notes
- Mercedes C-Class ME. XENTRY SCN coding required.
BCM Modules
SAM (Signal Acquisition Module) - Front
- Notes
- Mercedes Front SAM. XENTRY coding after replacement.
SAM (Signal Acquisition Module) - Rear
- Notes
- Mercedes Rear SAM. XENTRY coding.
TCU / TCM Transmission Modules
TCU - 5G-Tronic 722.6 5-Speed Auto A2035451832
- Part number
- A2035451832
- Protocol / method
- Bench
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Bosch TC1796
- Notes
- Requires SBC coding, ATF spec 236.14, basic setting with STAR required after install
TCU - 7G-Tronic 722.9 7-Speed Auto A2219000700
- Part number
- A2219000700
- Protocol / method
- Bench
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Requires VIN coding, ATF spec MB 236.14, basic setting and adaptation with STAR DAS required
TCU - 6-Speed Manual
- Protocol / method
- Virgin Flash
- Coding required
- No
- Cloning supported
- No
- Chip / MCU
- N/A
- Notes
- Manual transmission - no TCU present, clutch position sensor integration via CAN
TCU - 6-Speed Manual
- Protocol / method
- Virgin
- Coding required
- No
- Cloning supported
- No
- Chip / MCU
- N/A
- Notes
- Manual transmission - no TCU present, clutch position sensor integration via CAN
ABS / Brake Modules
ABS/ESP Control Unit (N47-5)
- Notes
- Mercedes ESP. XENTRY actuator test + variant coding.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) A 204 900 21 08
- Part number
- A 204 900 21 08
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
MBUX Central Display (11.9 inch portrait) A206-900-26-01
- Part number
- A206-900-26-01
- Notes
- module coding after replacement.
MBUX Instrument Display (12.3 inch digital) A206-900-56-01
- Part number
- A206-900-56-01
- Notes
- our diagnostic software module coding required. Mileage synchronization between cluster and EIS. Dealer authorization for mileage write.
Digital Key Module (NFC) A206-905-90-01
- Part number
- A206-905-90-01
- Notes
- Enables smartphone NFC digital key via MB ME app. module coding and MB account linking required. Physical smart key remains primary - digital key is supplemental.
Gateway / Security Modules
Central Gateway Module 8 records
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3373
- Notes
- Compatibility label: S400 W221. Door control box Notes: Read/Write
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A164. KG intelligent computer Notes: 315 MHz KG intelligent computer Notes: 433 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A166. KG intelligent computer Notes: 315 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- Compatibility label: A211. KG intelligent computer Notes: 433 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3624
- Notes
- Compatibility label: A212. KG intelligent computer Notes: 315 MHz
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3624
- Notes
- Compatibility label: C200 A212. KG intelligent computer Notes: Read/Write
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372
- Notes
- KG intelligent computer Notes: Read/Write
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3372(read-write)
- Notes
- Compatibility label: General model. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel unibody with extensive aluminum and high-strength steel mix
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Mercedes-Benz COMAND (NTG 4.0/4.5); 7" display; Bluetooth; CD/DVD; hard-drive navigation
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2010 Mercedes Benz C-Class?
ADAS calibration pricing for a 2010 Mercedes Benz C-Class depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Rear View Camera (PARKTRONIC), PRE-SAFE® Brake - Forward Camera (Stereo), and PRE-SAFE® Brake - Forward Radar (77GHz). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2010 Mercedes Benz C-Class?
Yes. The 2010 Mercedes Benz C-Class uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 0 285 010 229. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2010 Mercedes Benz C-Class?
After windshield replacement on a 2010 Mercedes Benz C-Class, Rear View Camera (PARKTRONIC), PRE-SAFE® Brake - Forward Camera (Stereo), and PRE-SAFE® Brake - Forward Radar (77GHz) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2010 Mercedes Benz C-Class module service take?
Most 2010 Mercedes Benz C-Class onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 24 programmable modules documented in our database (1 ECU, 2 BCM, 3 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2010 Mercedes Benz C-Class on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2010 Mercedes Benz C-Class. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2010 Mercedes Benz C-Class programming?
Every programming, cloning, and calibration job on the 2010 Mercedes Benz C-Class is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2010 Mercedes Benz C-Class can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2010 Mercedes Benz C-Class. For this vehicle our database documents:
- 1 engine control (ECU/PCM)
- 3 transmission control (TCU/TCM)
- 2 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 3 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2010 Mercedes-Benz C-Class covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- A 272 153 15 79
- BCM / Body Module Part Numbers
- A 204 900 19 00
- TCU / TCM Part Numbers
- A2035451832, A2219000700
- SRS / Airbag Module Part Numbers
- 0 285 010 229, 0 285 011 400, 0285002894, A204 820 22 85, A204 820 22 85 (5WK44004), A204 870 68 26, A204 870 68 26 (5WK44004), A204 870 94 26, A204 870 94 26 (5WK44318), A204 901 27 04, A204 901 27 04 (5WK44739), A204 901 28 04
- ABS / EBCM Part Numbers
- A 204 545 47 32
- Instrument Cluster (IPC) Part Numbers
- A 204 900 21 08
- Transmission Control Module (TCM) Part Numbers
- A2035451832, A2219000700
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2010 Mercedes Benz C Class
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
XENTRY Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.