2016 Mazda MAZDA3

ADAS calibration pricing for a 2016 Mazda Mazda3 depends on which of its 5 documented systems need work after a repair. This vehicle is documented with i-Activsense - Forward Camera (SBS / LDW / LKA), i-Activsense - Front Radar (77GHz) - MRCC / AEB, Blind Spot Monitoring (BSM) + Rear Cross-Traffic Alert, Mazda Radar Cruise Control (MRCC) - Adaptive Cruise, and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs and we return a number within 4 hours.

Yes. The 2016 Mazda Mazda3 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: BJS757K0002. Bench-only or in-vehicle - both paths are supported. Send the part number and a description of what triggered the light, and we will provide a quote and ETA.

After windshield replacement on a 2016 Mazda Mazda3, i-Activsense - Forward Camera (SBS / LDW / LKA), i-Activsense - Front Radar (77GHz) - MRCC / AEB, and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site (DFW Metroplex) with OE target fixtures or via mail-in for the front camera/radar module.

Most 2016 Mazda Mazda3 jobs complete same-day once the vehicle or module arrives. This vehicle has roughly 15 programmable modules documented in our database (4 ECU, 2 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Module-bench work (ECU clones, BCM reprograms, SRS resets) ships back inside 1-3 business days including return shipping. ADAS calibration is on-site for DFW or mail-in for the front module.

Both. We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding) and a mail-in bench for module-only jobs (ECU cloning, BCM repair, SRS reset, TCU clone). Quote the work and we will tell you which path is right for the 2016 Mazda Mazda3.

Every programming, cloning, and calibration job on the 2016 Mazda Mazda3 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Yes - all-keys-lost is supported on the 2016 Mazda Mazda3. Immobilizer generation on this platform: SSU. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.

We program, clone, repair, or replace the full programmable-module stack on a 2016 Mazda Mazda3. For this vehicle our database documents:

• 4 engine control (ECU/PCM)
• 1 transmission control (TCU/TCM)
• 2 body control (BCM and related)
• 1 ABS / brake control (EBCM)
• 1 immobilizer / security
• 1 key & fob
• 2 instrument cluster (IPC)
• 2 steering angle sensor (SAS)
• 5 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.