Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2017 Lexus Rx Supported Services

2017 Lexus Rx

ADAS calibration, module programming, and security relearns

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Technical snapshot
  • Platform AL20 (4th Gen)
  • CAN Architecture CAN Bus (HS-CAN, MS-CAN), LIN Bus
  • Security DST-AES 128-bit Smart Key / Immobilizer

What do you need fixed?

Choose a service to start your quote.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2017 Lexus RX. On this vehicle we cover documented systems include Pre-Collision System (PCS) with Pedestrian Detection, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Blind Spot Monitor / Rear Cross Traffic Alert, this AL20 (4th Gen) platform vehicle, G4 (DST-AES) immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.

Platform
AL20 (4th Gen)
Production
2004-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
CAN Bus (HS-CAN, MS-CAN), LIN Bus
YEAR-SPECIFIC NOTES

VIN / Build Split

VIN pos 4-8 identifies model/body/engine. Lexus WMI: JTH, 2T2. Position 4-5 = model code. Position 10 = model year code.

SERVICE SNAPSHOT

Exact-year service summary for 2017 Lexus RX

ADAS coverage

This 2017 Lexus RX page documents 4 ADAS systems, including Pre-Collision System (PCS) with Pedestrian Detection, Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Monitor / Rear Cross Traffic Alert, and Adaptive Cruise Control (ACC).

View ADAS data

Calibration triggers

Documented calibration triggers include Windshield Replacement, Front Bumper Repair, Rear Bumper Repair, and Forward Radar Replacement. Use the ADAS tab for the full trigger list.

View triggers

Programmable modules

This page indexes 14 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

This page includes 2 gateway, immobilizer, or key-security records for this 2017 Lexus RX.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2017 Lexus RX using the documented systems and module data on this page.

Choose a section
EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Lexus Safety System+ (LSS+): Pre-Collision System, Lane Departure Alert, Automat - Available; Platform: AL20 (4th Gen) - Confirmed

Driver-assist suite

Lexus Safety System+ (LSS+): Pre-Collision System, Lane Departure Alert, Automatic High Beams, Adaptive Cruise Control

VIN and build split

VIN pos 4-8 identifies model/body/engine. Lexus WMI: JTH, 2T2. Position 4-5 = model code. Position 10 = model year code.

Infotainment context

Lexus Display Audio / Enform

Network and access

CAN: CAN Bus (HS-CAN, MS-CAN), LIN Bus

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Toyota Techstream / Toyota GTS+

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2017 Lexus Rx. Counts reflect modules our techs have programmed or calibrated on this exact platform.

Need something not listed? Most undocumented modules can still be programmed.

Get a Quote
Feature availability 2

Lexus Safety System+ (LSS+): Pre-Collision System, Lane Departure Alert, Automat

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

Platform: AL20 (4th Gen)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Lexus RX issues we resolve on this platform: Pre-Collision System (PCS) with Pedestrian Detection, Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Monitor / Rear Cross Traffic Alert, and Adaptive Cruise Control (ACC) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - AL20 (4th Gen) platform uses CAN Bus (HS-CAN, MS-CAN), LIN Bus.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Lexus Safety System+ (LSS+): Pre-Collision System, Lane Departure Alert, Automatic High Beams, Adaptive Cruise Control

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Pre-Collision System (PCS) with Pedestrian DetectionFused (Forward Camera + Millimeter-Wave Radar)FusedStatic YES88210-0E080, 86790-48040
Lane Keep Assist / Lane Departure Warning (LKA/LDW)Forward CameraCameraStatic YES86790-48040
Blind Spot Monitor / Rear Cross Traffic AlertRear Side RadarRadarStatic + Dynamic YES88162-0E030 (L), 88163-0E030 (R)
Adaptive Cruise Control (ACC)Millimeter-Wave RadarRadarStatic YES88210-0E080
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

Windshield Replacement Affected: PCS Camera, LDA Camera, AHB

Forward camera static calibration required via Techstream after windshield replacement.

Front Bumper Repair Affected: PCS Radar, ACC Radar

Front radar static alignment via Techstream required.

Rear Bumper Repair Affected: BSM Radar L/R, RCTA

Rear BSM radar calibration via Techstream required.

Forward Radar Replacement

Radar module replacement requires alignment/calibration using Techstream.

Any Front-End Collision

Inspect and recalibrate forward radar after any front-end collision using Techstream.

BSM Sensor Replacement

Blind spot monitoring sensor replacement requires calibration using Techstream.

Mirror Replacement

If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.

SRS Modules

SRS Control Unit 89170 0W040
Part number
89170 0W040
Location
Under center console
Manufacturer
Denso
Notes
Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 89170 0W080
Part number
89170 0W080
Location
Under center console
Manufacturer
Denso
Notes
Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.

ECU Modules

Engine ECU (SFI ECU) - 2GR-FXS / 2GR-FKS V6 89661-0E680
Part number
89661-0E680
Protocol / method
OBD Programming Port
Coding required
Yes
Cloning supported
Yes
Chip / MCU
Denso SH72531
Notes
Techstream Programming Port for programming. VIN registration required. Immobilizer data linked to Smart Key ECU - both may need synchronized registration if ECU replaced without matching SKS.
Hybrid Vehicle ECU (HV ECU) - RX 450h 89981-0E080
Part number
89981-0E080
Protocol / method
OBD Programming Port
Coding required
Yes
Cloning supported
No
Chip / MCU
Denso HV MCU
Notes
RX 450h only. Controls HV battery management, regenerative braking coordination, MG1/MG2 motor generators. Techstream HV system initialization required after replacement. Do not clear HV DTCs without full HV system inspection. High-voltage precautions required.

BCM Modules

Body ECU 89221-0E130
Part number
89221-0E130
Security
DST-AES
Coding required
Yes
Cloning supported
Yes
Notes
Techstream registration required. DST-AES system - key re-registration needed after BCM replacement.
Smart Key ECU 89990-0E050
Part number
89990-0E050
Security
DST-AES
Coding required
Yes
Cloning supported
No
Notes
Fresh key registration required after SKS replacement. Cannot clone. Techstream key registration procedure mandatory.

TCU / TCM Transmission Modules

TCU - 6-Speed Auto (U660E/U761E) 89530-48
Part number
89530-48
Protocol / method
J2534
Coding required
Yes
Cloning supported
Yes
Chip / MCU
Renesas SH7058
Notes
Requires Toyota Techstream or compatible J2534 tool. ATF WS fluid specification. TCU relearn procedure mandatory after installation. VIN coding required.
TCU - CVT (K111/K112) 89530-48
Part number
89530-48
Protocol / method
J2534
Coding required
Yes
Cloning supported
No
Chip / MCU
Renesas SH7269
Notes
Original TCU required due to advanced security. Toyota CVT fluid TC specification. Requires Techstream initialization and belt learning procedure.

ABS / Brake Modules

Skid Control ECU (ABS/VSC/TRAC) 44510-0E130
Part number
44510-0E130
Cloning supported
Yes
Notes
Techstream registration. Steering angle sensor zero-point calibration required after replacement.

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) 83800-48190
Part number
83800-48190
Cloning supported
Yes
Notes
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 83800-48200
Part number
83800-48200
Cloning supported
Yes
Notes
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
cross-year extension)

Connectivity & Accessories

Multi-Information Display / Navigation ECU 86804-0E160
Part number
86804-0E160
Notes
Techstream configuration after replacement. Navigation update via Lexus Enform.
ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
Unibody, steel/aluminum mixed construction
OBD Protocol
ISO 15765-4 CAN
CAN Architecture
CAN Bus (HS-CAN, MS-CAN), LIN Bus
Infotainment
Lexus Display Audio / Enform
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed
Reviewed coverage: 2017 - 3.5L (2GRFXE).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2017 Lexus RX?

ADAS calibration pricing for a 2017 Lexus RX depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Pre-Collision System (PCS) with Pedestrian Detection, Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Monitor / Rear Cross Traffic Alert, and Adaptive Cruise Control (ACC). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2017 Lexus RX?

Yes. The 2017 Lexus RX uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 89170 0W040. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2017 Lexus RX?

After windshield replacement on a 2017 Lexus RX, Pre-Collision System (PCS) with Pedestrian Detection and Lane Keep Assist / Lane Departure Warning (LKA/LDW) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.

How long does a 2017 Lexus RX module service take?

Most 2017 Lexus RX onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 13 programmable modules documented in our database (2 ECU, 2 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.

Do you cover the 2017 Lexus RX on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2017 Lexus RX. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2017 Lexus RX programming?

Every programming, cloning, and calibration job on the 2017 Lexus RX is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Which modules on a 2017 Lexus RX can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2017 Lexus RX. For this vehicle our database documents:

  • 2 engine control (ECU/PCM)
  • 2 transmission control (TCU/TCM)
  • 2 body control (BCM and related)
  • 1 ABS / brake control (EBCM)
  • 1 immobilizer / security
  • 1 key & fob
  • 2 instrument cluster (IPC)
  • 2 steering angle sensor (SAS)
  • 4 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2017 Lexus Rx covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ADAS Module Part Numbers
88210-48090 (DENSO 77GHZ FWD RADAR, 86790-48090 (DENSO MONO CAMERA PCS)
ECU / PCM Part Numbers
89661-48E50 (3.5L 2GR-FKS V6 RX350, RX200T), 89661-48F10 (3.5L 2GR-FXE HYBRID RX450H)
BCM / Body Module Part Numbers
89221-0E130, 89990-0E050
TCU / TCM Part Numbers
89530-48
SRS / Airbag Module Part Numbers
89170 0W040, 89170 0W080
ABS / EBCM Part Numbers
44050-48200 (FWD), 44050-48210 (AWD)
Instrument Cluster (IPC) Part Numbers
83800-48190, 83800-48200
Transmission Control Module (TCM) Part Numbers
89530-48

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

(945) 382-4065 Get a Quote

Shared module fitment

Vehicles sharing modules with the 2017 Lexus RX

These vehicles use one or more of the same replacement modules indexed for this vehicle.

Finish the repair

Need help finishing this repair?

Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.