Immobilizer: KVM / Passive Entry
StandardKey programming requires manufacturer-level tool access. Add key supported.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065Covers model years 2013-2021 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Land Rover Range Rover built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
The ADAS, module, and security rows below are consolidated across the full 2013-2021 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2013-2021”.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 Land Rover Range-Rover. On this vehicle we cover documented systems include Emergency Braking / Pre-Collision Alert, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Blind Spot Monitor (BSM), this L405 platform vehicle, JLR PEPS - SDD dealer-level required immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Key programming requires manufacturer-level tool access. Add key supported.
Verify platform code matches when cross-referencing part numbers across model years.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Verify market, build date, and module part numbers by VIN in JLR TOPIx before service.
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
JLR SDD / JLR Pathfinder
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
This platform uses CAN (HS/MS), LIN, MOST (audio), FlexRay (air suspension/chassis) with ISO 15765-4 CAN.
This page consolidates Land Rover Range Rover service data for 2013-2021 across 9 model years; 9 years have merged CCT data.
Choose a yearMerged ADAS coverage includes 24 system records, including Rear View Camera (2013-2014), Blind Spot Monitoring (2013-2014), JLR ADAS camera/radar - VIN-specific (2015-2018), and Emergency Braking / Pre-Collision Alert (2019). Year-marked systems apply only to the shown range.
View ADAS dataThis generation has 39 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersThe merged generation page indexes 120 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway, immobilizer, and key-security coverage includes 16 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Land Rover Range Rover 2013-2021 span, with exact-year validation before service.
Get a quoteYes
SDD/IDS programming + IMMO registration.
Yes
SDD brake bleed procedure + DSC reset.
Yes
Forward camera recalibration required after windshield R&R. OEM scan tool guided static calibration.
required
SDD forward camera static calibration. JLR-approved glass. Large L405 windshield - confirm camera mount fully seated.
required
SDD forward camera static calibration. JLR-approved glass. Large L405 windshield - confirm camera mount fully seated.
required
SDD forward camera static calibration. JLR-approved glass. Large L405 windshield - confirm camera mount fully seated.
required
SDD forward camera static calibration. JLR-approved glass. Large L405 windshield - confirm camera mount fully seated.
required
jlr_ids static ADAS calibration after windshield R&R. Level surface. Verify AEB and LKA DTC-free.
required
jlr_ids static ADAS calibration after windshield R&R. Level surface. Verify AEB and LKA DTC-free.
required
jlr_ids static ADAS calibration after windshield R&R. Level surface. Verify AEB and LKA DTC-free.
required
jlr_ids static ADAS calibration after windshield R&R. Level surface. Verify AEB and LKA DTC-free.
required
jlr_ids ADAS calibration. L405 procedure - do NOT use L460 data.
required
jlr_ids ADAS calibration. L405 procedure - do NOT use L460 data.
required
jlr_ids ADAS calibration. L405 procedure - do NOT use L460 data.
required
jlr_ids ADAS calibration. L405 procedure - do NOT use L460 data.
Yes
Camera module replacement requires full recalibration using OEM scan tool.
Yes
Camera module replacement requires full recalibration using OEM scan tool.
Yes
Inspect and recalibrate forward camera after any front-end collision using OEM scan tool.
Yes
Inspect and recalibrate forward camera after any front-end collision using OEM scan tool.
Yes
Forward radar angular alignment required after front bumper R&R. Use OEM scan tool.
Yes
Radar module replacement requires alignment/calibration using OEM scan tool.
Yes
Radar module replacement requires alignment/calibration using OEM scan tool.
Yes
BSD radar alignment required after rear bumper R&R. Use OEM scan tool.
Yes
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
Yes
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
Yes
Surround view mirror camera recalibration required after mirror R&R. Use OEM scan tool.
required
Side camera static calibration via SDD. Triggers surround recalibration.
required
Verify the VIN-specific JLR IDS/Pathfinder calibration or initialization procedure before service.
required
Verify the VIN-specific JLR IDS/Pathfinder calibration or initialization procedure before service.
required
Verify the VIN-specific JLR IDS/Pathfinder calibration or initialization procedure before service.
required
Verify the VIN-specific JLR IDS/Pathfinder calibration or initialization procedure before service.
required
Verify the VIN-specific JLR IDS/Pathfinder calibration or initialization procedure before service.
required
jlr_ids radar alignment + camera calibration if disturbed.
required
jlr_ids radar alignment + camera calibration if disturbed.
required
jlr_ids radar alignment + camera calibration if disturbed.
required
jlr_ids radar alignment + camera calibration if disturbed.
required
Radar static aim calibration via SDD. Level surface, curb weight. Ensure air suspension is at Standard mode before calibration.
required
Radar static aim calibration via SDD. Level surface, curb weight. Ensure air suspension is at Standard mode before calibration.
required
jlr_ids radar alignment + front camera calibration if disturbed. Bracket inspection before radar calibration.
required
jlr_ids radar alignment + front camera calibration if disturbed. Bracket inspection before radar calibration.
required
jlr_ids radar alignment + front camera calibration if disturbed. Bracket inspection before radar calibration.
required
jlr_ids radar alignment + camera calibration if disturbed.
required
jlr_ids radar alignment + camera calibration if disturbed.
required
jlr_ids radar alignment + camera calibration if disturbed.
required
jlr_ids radar alignment + camera calibration if disturbed.
required
jlr_ids BSA init. Rear camera calibration if removed.
required
jlr_ids BSA init. Rear camera calibration if removed.
required
jlr_ids BSA init. Rear camera calibration if removed.
required
SDD PMI for BSM if disconnected. Surround camera rear calibration if disturbed. Note tow bar sensor field impact.
required
SDD PMI for BSM if disconnected. Surround camera rear calibration if disturbed. Note tow bar sensor field impact.
required
SDD PMI for BSM if disconnected. Surround camera rear calibration if disturbed. Note tow bar sensor field impact.
required
jlr_ids BSM initialization if sensors disturbed. Rear camera calibration if removed.
required
jlr_ids BSM initialization if sensors disturbed. Rear camera calibration if removed.
required
jlr_ids BSM initialization if sensors disturbed. Rear camera calibration if removed.
required
jlr_ids BSM init. Rear camera calibration if removed.
required
jlr_ids BSM init. Rear camera calibration if removed.
required
jlr_ids height sensor calibration.
required
jlr_ids height sensor calibration.
required
jlr_ids ASCM calibration + height sensor zero-point. Level surface required.
required
jlr_ids ASCM calibration + height sensor zero-point. Level surface required.
required
jlr_ids ASCM calibration + height sensor zero-point. Level surface required.
required
jlr_ids programming. DoIP for BCM/GWM. VIN-tie + coding. KVM: dealer auth. Battery >=80%. Cascaded updates possible.
required
jlr_ids programming. DoIP for BCM/GWM. VIN-tie + coding. KVM: dealer auth. Battery >=80%. Cascaded updates possible.
required
jlr_ids programming. DoIP for BCM/GWM. VIN-tie + coding. KVM: dealer auth. Battery >=80%. Cascaded updates possible.
required
jlr_ids programming. DoIP for BCM/GWM. VIN-tie + coding. KVM: dealer auth. Battery >=80%. Cascaded updates possible.
required
jlr_ids programming. DoIP for BCM/GWM. VIN-tie + coding. KVM: dealer auth. Battery >=80%. Cascaded updates possible.
required
jlr_ids programming. DoIP for BCM/GWM. VIN-tie + coding. KVM: dealer auth. Battery >=80%. Cascaded updates possible.
required
jlr_ids programming. DoIP for BCM/GWM. VIN-tie + coding. KVM: dealer auth. Battery >=80%. Cascaded updates possible.
required
jlr_ids programming. DoIP for BCM/GWM. VIN-tie + coding. KVM: dealer auth. Battery >=80%. Cascaded updates possible.
required
SDD PMI required. Factory authorization may be needed for ECM, PEPS, BCU, AILS.
required
jlr_ids programming on all modules. VIN-tie + variant coding mandatory. KVM: dealer auth required. Battery >=80% SOC. Cascaded updates may occur.
required
jlr_ids programming on all modules. VIN-tie + variant coding mandatory. KVM: dealer auth required. Battery >=80% SOC. Cascaded updates may occur.
required
jlr_ids programming on all modules. VIN-tie + variant coding mandatory. KVM: dealer auth required. Battery >=80% SOC. Cascaded updates may occur.
required
jlr_ids programming on all modules. VIN-tie + variant coding mandatory. KVM: dealer auth required. Battery >=80% SOC. Cascaded updates may occur.
required
jlr_ids programming on all modules. VIN-tie + variant coding mandatory. KVM: dealer auth required. Battery >=80% SOC. Cascaded updates may occur.
required
jlr_ids programming on all modules. VIN-tie + variant coding mandatory. KVM: dealer auth required. Battery >=80% SOC. Cascaded updates may occur.
required
jlr_ids programming on all modules. VIN-tie + variant coding mandatory. KVM: dealer auth required. Battery >=80% SOC. Cascaded updates may occur.
required
jlr_ids programming on all modules. VIN-tie + variant coding mandatory. KVM: dealer auth required. Battery >=80% SOC. Cascaded updates may occur.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
required
SDD air suspension initialization mandatory after any air suspension component replacement. ARNOTT struts compatible. After initialization, confirm ACC radar aim at new ride height - radar re-aim if height changed significantly.
required
SDD air suspension initialization mandatory after any air suspension component replacement. ARNOTT struts compatible. After initialization, confirm ACC radar aim at new ride height - radar re-aim if height changed significantly.
required
SDD air suspension initialization mandatory after any air suspension component replacement. ARNOTT struts compatible. After initialization, confirm ACC radar aim at new ride height - radar re-aim if height changed significantly.
required
Air suspension height MUST be at Standard mode for radar calibration. Recalibrate after any ride height adjustment.
required
Air suspension height MUST be at Standard mode for radar calibration. Recalibrate after any ride height adjustment.
required
Full SDD scan. RCM crash data review - reset or replace. Calibrate all ADAS. Check air suspension height sensors if vehicle was impacted.
required
Full SDD scan. RCM crash data review - reset or replace. Calibrate all ADAS. Check air suspension height sensors if vehicle was impacted.
required
Full SDD scan. RCM crash data review - reset or replace. Calibrate all ADAS. Check air suspension height sensors if vehicle was impacted.
required
Manual service disconnect mandatory. HV-trained technicians only. SDD HV calibration procedures apply.
required
Manual service disconnect mandatory. HV-trained technicians only. SDD HV calibration procedures apply.
required
Manual service disconnect mandatory. HV-trained technicians only. SDD HV calibration procedures apply.
required
Full 4-camera jlr_ids surround camera calibration required. Calibration board required. All 4 cameras must pass.
required
Full 4-camera jlr_ids calibration. Calibration board required.
| Year | VIN split | Infotainment | Wireless CarPlay | Trim notes |
|---|---|---|---|---|
| 2013 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2014 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2015 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2016 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2017 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2018 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2019 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2020 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Land Rover Pivi Pro | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2021 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Land Rover Pivi Pro | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
24 ADAS systems documented across 2013-2021. Rows that apply to only part of the generation carry a year badge.
JLR Land Rover Drive Pack - Emergency Braking, Lane Keeping Assist, Blind Spot Monitoring, Reverse Traffic Detection, Adaptive Cruise Control, Surround Camera, Terrain Response 2, ATPC
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera 2013-2014 | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitoring 2013-2014 | Radar | ADAS | Static | Conditional | - | |
| JLR ADAS camera/radar - VIN-specific 2015-2018 | Forward Camera | Camera | Static | YES | - | |
| JLR ADAS camera/radar - VIN-specific 2015-2018 | Front Radar | Radar | Static | YES | - | |
| JLR ADAS camera/radar - VIN-specific 2015-2018 | Side Radar | Radar | Static + Dynamic | YES | - | |
| JLR ADAS camera/radar - VIN-specific 2015-2018 | Side Radar | Radar | Static + Dynamic | YES | - | |
| JLR ADAS camera/radar - VIN-specific 2015-2018 | Forward Camera | Camera | Static | YES | - | |
| Emergency Braking / Pre-Collision Alert 2019 | Forward Radar + Forward Camera | Fused | Static | YES | LR072119 (RADAR) | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) 2019 | Forward Camera | Camera | Static | YES | LR072200 (CAMERA) | |
| Blind Spot Monitor (BSM) 2019 | Side Radar | Radar | Static + Dynamic | YES | LR072122 (L), LR072123 (R) | |
| Rear Traffic Detection (RTD) 2019 | Side Radar | Radar | None | YES | LR072122 (L), LR072123 (R) | |
| Surround Camera System (360) 2019 | 360 Camera | Camera | Static | YES | LR072400 (FRONT), LR072401 (REAR), LR072402 (L), LR072403 (R) | |
| Adaptive Cruise Control (ACC) 2019 | Forward Radar | Radar | Static | YES | LR072119 | |
| All-Terrain Progress Control (ATPC) 2019 | Off-Road Assist | Other | None | YES | LR072500 | |
| Forward Camera (Monocular) 2020 | Forward Camera | Camera | Static | YES | ~LR065264 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) 2020 | Front Radar | Radar | Static | YES | ~LR078029 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) 2020 | Side Radar | Radar | Static + Dynamic | YES | ~LR053947 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) 2020 | Side Radar | Radar | Static + Dynamic | YES | ~LR053948 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| 360 Surround Camera System - All 4 Cameras 2020 | Forward Camera | Camera | Static | YES | OEM - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(4 CAMERAS | |
| Forward Camera (Monocular) 2021 | Forward Camera | Camera | Static | YES | ~LR065264 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) 2021 | Front Radar | Radar | Static | YES | ~LR078029 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) 2021 | Side Radar | Radar | Static + Dynamic | YES | ~LR053947 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) 2021 | Side Radar | Radar | Static + Dynamic | YES | ~LR053948 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| 360 Surround Camera - All 4 Cameras 2021 | Forward Camera | Camera | Static | YES | - |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationSDD/IDS programming + IMMO registration.
SDD brake bleed procedure + DSC reset.
Forward camera recalibration required after windshield R&R. OEM scan tool guided static calibration.
Camera module replacement requires full recalibration using OEM scan tool.
Inspect and recalibrate forward camera after any front-end collision using OEM scan tool.
Forward radar angular alignment required after front bumper R&R. Use OEM scan tool.
Radar module replacement requires alignment/calibration using OEM scan tool.
BSD radar alignment required after rear bumper R&R. Use OEM scan tool.
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
Surround view mirror camera recalibration required after mirror R&R. Use OEM scan tool.
Verify the VIN-specific JLR IDS/Pathfinder calibration or initialization procedure before service.
jlr_ids radar alignment + camera calibration if disturbed.
jlr_ids BSA init. Rear camera calibration if removed.
jlr_ids height sensor calibration.
jlr_ids programming. DoIP for BCM/GWM. VIN-tie + coding. KVM: dealer auth. Battery >=80%. Cascaded updates possible.
SDD forward camera static calibration. JLR-approved glass. Large L405 windshield - confirm camera mount fully seated.
Radar static aim calibration via SDD. Level surface, curb weight. Ensure air suspension is at Standard mode before calibration.
SDD PMI for BSM if disconnected. Surround camera rear calibration if disturbed. Note tow bar sensor field impact.
Side camera static calibration via SDD. Triggers surround recalibration.
SDD air suspension initialization mandatory after any air suspension component replacement. ARNOTT struts compatible. After initialization, confirm ACC radar aim at new ride height - radar re-aim if height changed significantly.
Air suspension height MUST be at Standard mode for radar calibration. Recalibrate after any ride height adjustment.
SDD PMI required. Factory authorization may be needed for ECM, PEPS, BCU, AILS.
Full SDD scan. RCM crash data review - reset or replace. Calibrate all ADAS. Check air suspension height sensors if vehicle was impacted.
Manual service disconnect mandatory. HV-trained technicians only. SDD HV calibration procedures apply.
jlr_ids static ADAS calibration after windshield R&R. Level surface. Verify AEB and LKA DTC-free.
jlr_ids radar alignment + front camera calibration if disturbed. Bracket inspection before radar calibration.
jlr_ids BSM initialization if sensors disturbed. Rear camera calibration if removed.
Full 4-camera jlr_ids surround camera calibration required. Calibration board required. All 4 cameras must pass.
jlr_ids ASCM calibration + height sensor zero-point. Level surface required.
jlr_ids programming on all modules. VIN-tie + variant coding mandatory. KVM: dealer auth required. Battery >=80% SOC. Cascaded updates may occur.
Camera module replacement requires full recalibration using OEM scan tool.
Inspect and recalibrate forward camera after any front-end collision using OEM scan tool.
Radar module replacement requires alignment/calibration using OEM scan tool.
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
jlr_ids ADAS calibration. L405 procedure - do NOT use L460 data.
jlr_ids radar alignment + camera calibration if disturbed.
jlr_ids BSM init. Rear camera calibration if removed.
Full 4-camera jlr_ids calibration. Calibration board required.
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
120 documented Land Rover Range Rover modules across 2013-2021. Open a group for part numbers, programming protocol, security notes, and clone support.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2013-2016 for this generation
Compatible donor years: 2013, 2014, 2015, 2016
Always match the full part number before buying a used module.
_years covers only 2013-2016 for this generation
Compatible donor years: 2013, 2014, 2015, 2016
Always match the full part number before buying a used module.
_years covers only 2013-2016 for this generation
Compatible donor years: 2013, 2014, 2015, 2016
Always match the full part number before buying a used module.
_years covers only 2013-2016 for this generation
Compatible donor years: 2013, 2014, 2015, 2016
Always match the full part number before buying a used module.
_years covers only 2013-2016 for this generation
Compatible donor years: 2013, 2014, 2015, 2016
Always match the full part number before buying a used module.
_years covers only 2013-2016 for this generation
Compatible donor years: 2013, 2014, 2015, 2016
Always match the full part number before buying a used module.
_years covers only 2013-2016 for this generation
Compatible donor years: 2013, 2014, 2015, 2016
Always match the full part number before buying a used module.
_years covers only 2013-2016 for this generation
Compatible donor years: 2013, 2014, 2015, 2016
Always match the full part number before buying a used module.
_years covers only 2017-2020 for this generation
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2017-2020 for this generation
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2017-2020 for this generation
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2017-2020 for this generation
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family LR072020 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family LR072021 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family LR072023 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family LR072010 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Donor must match part family LR070009 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2015-2016 for this generation
Compatible donor years: 2015, 2016
Donor must match part family LR072605 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2017-2018 for this generation
Compatible donor years: 2017, 2018
Donor must match part family LR096363 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Donor must match part family LR087711 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Donor must match part family LR069434 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2015-2016 for this generation
Compatible donor years: 2015, 2016
Donor must match part family LR072604 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2017-2018 for this generation
Compatible donor years: 2017, 2018
Donor must match part family LR096364 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Donor must match part family LR087712 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family LR072045 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2013 for this generation
Compatible donor years: 2013
Donor must match part family DK62-10849-AC - requires cloning
Always match the full part number before buying a used module.
_years covers only 2014 for this generation
Compatible donor years: 2014
Donor must match part family EK62-10849-AC - requires cloning
Always match the full part number before buying a used module.
_years covers only 2015-2016 for this generation
Compatible donor years: 2015, 2016
Donor must match part family LR055231 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2017-2019 for this generation
Compatible donor years: 2017, 2018, 2019
Donor must match part family LR069929 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Donor must match part family LX73-10B955-AE - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Donor must match part family LX73-10B955-AF - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Donor must match part family LR098765 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2013-2019 for this generation
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2013-2019 for this generation
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2013-2018 for this generation
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
16 gateway, immobilizer, and security items documented across 2013-2021.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
JLR InControl Key - SDD + factory authorization required
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
JLR PEPS - SDD dealer-level required system. Topix/SDD (JLR Pathfinder) required for key programming and module replacement. Pin code extractable via obd; akl supported.
Yes. Core Auto Logic supports generation-scoped module programming for the Land Rover Range Rover (2013-2021). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
The Land Rover Range Rover (2013-2021) generation currently shows 86 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Module (ACM), SRS Control Unit (variant) (2013-2016), and SRS Control Unit (variant) (2017-2020). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 0280218010 - confirm for your exact year/VIN.
The merged generation data documents 24 ADAS systems, including Rear View Camera (2013-2014), Blind Spot Monitoring (2013-2014), JLR ADAS camera/radar - VIN-specific (2015-2018), Emergency Braking / Pre-Collision Alert (2019), and Lane Keep Assist / Lane Departure Warning (LKA/LDW) (2019). Calibration triggers include ECM Replacement (2013-2014), ABS/DSC Module Replacement (2013-2014), Windshield Replacement (2013-2014), and Forward Camera Replacement (2013-2018). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Yes. The generation data includes 37 SRS records, including Airbag Control Module (ACM), SRS Control Unit (variant) (2013-2016), and SRS Control Unit (variant) (2017-2020). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 0280218010 - confirm for your exact year/VIN.
No assumption should be made across the full span. The generation page merges rows across 2013-2021; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Yes, where the VIN and security workflow support it. The generation data includes 16 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.