VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2020 Land-Rover Defender Supported Services
2020 Land-Rover Defender
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform L663 (Defender, 2020+) - MLA-professional bench programming tool (Modular Longitudinal Architecture)
- CAN Architecture JLR Ethernet backbone (DoIP); CAN FD; FlexRay (suspension); OBD2 DLC ISO 15765-4 CAN
- Security JLR KVM (Key-less Vehicle Module) - AES-256; Kessy passive entry; no OBD pin extraction; AKL requires jlr_ids + JLR dealer auth
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Land Rover Defender. On this vehicle we cover documented systems include Front Camera (ClearSight Ground View / Forward ADAS), Front Radar (77GHz, ACC/Emergency Braking), and Blind Spot Assist (BSA) - Left Rear Radar, this L663 (Defender, 2020+) - MLA-professional bench programming tool (Modular Longitudinal Architecture) platform vehicle, JLR KVM (Key-less Vehicle Module) AES-256 immobilizer support, Land Rover Pivi Pro infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
L663 (Defender, 2020+) - MLA-professional bench programming tool (Modular Longitudinal Architecture)
Production
2020-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
4WD
Engine
-
CAN Speed
JLR Ethernet backbone (DoIP); CAN FD; FlexRay (suspension); OBD2 DLC ISO 15765-4 CAN
YEAR-SPECIFIC NOTES
Infotainment
Land Rover Pivi Pro
Wireless Support
CarPlay: Yes
Exact-year service summary for 2020 Land Rover Defender
ADAS coverage
This 2020 Land Rover Defender page documents 6 ADAS systems, including Front Camera (ClearSight Ground View / Forward ADAS), Front Radar (77GHz, ACC/Emergency Braking), Blind Spot Assist (BSA) - Left Rear Radar, and Blind Spot Assist (BSA) - Right Rear Radar.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair, and Mirror Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 18 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 7 gateway, immobilizer, or key-security records for this 2020 Land Rover Defender.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2020 Land Rover Defender using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
JLR ClearSight Ground View, Terrain Response 2, All-Terrain Progress Control (AT - Available; Platform: L663 (Defender, 2020+) - Confirmed
Driver-assist suite
JLR ClearSight Ground View, Terrain Response 2, All-Terrain Progress Control (ATPC), Wade Sensing (wading depth sensor), ClearSight Interior Rear View Mirror (optional), Emergency Braking, Blind Spot Assist, Reverse Traffic Detection, Lane Keep Assist (Lane Keeping Assist), Adaptive Cruise Control with Queue Assist
VIN and build split
VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code.
Infotainment context
Land Rover Pivi Pro; PIVI Pro (Pivi Pro 11.4" InControl Touch Pro Duo) - Android-based; OTA updates; Apple CarPlay / Android Auto
Connectivity notes
Wireless CarPlay: Yes
Network and access
CAN: JLR Ethernet backbone (DoIP); CAN FD; FlexRay (suspension); OBD2 DLC ISO 15765-4 CAN
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
JLR SDD / JLR Pathfinder
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2020 Land-Rover Defender. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
5 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
1 module documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
9 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
JLR ClearSight Ground View, Terrain Response 2, All-Terrain Progress Control (AT
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: L663 (Defender, 2020+)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Land Rover Defender issues we resolve on this platform: Front Camera (ClearSight Ground View / Forward ADAS), Front Radar (77GHz, ACC/Emergency Braking), Blind Spot Assist (BSA) - Left Rear Radar, and Blind Spot Assist (BSA) - Right Rear Radar recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - L663 (Defender, 2020+) - MLA-professional bench programming tool (Modular Longitudinal Architecture) platform uses JLR Ethernet backbone (DoIP); CAN FD; FlexRay (suspension); OBD2 DLC ISO 15765-4 CAN.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
JLR ClearSight Ground View, Terrain Response 2, All-Terrain Progress Control (ATPC), Wade Sensing (wading depth sensor), ClearSight Interior Rear View Mirror (optional), Emergency Braking, Blind Spot Assist, Reverse Traffic Detection, Lane Keep Assist (Lane Keeping Assist), Adaptive Cruise Control with Queue Assist
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Front Camera (ClearSight Ground View / Forward ADAS) | Forward Camera | Camera | Static | YES | ~LR095221 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Front Radar (77GHz, ACC/Emergency Braking) | Front Radar | Radar | Static | YES | ~LR102133 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Assist (BSA) - Left Rear Radar | Side Radar | Radar | Static + Dynamic | YES | ~LR094876 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Assist (BSA) - Right Rear Radar | Side Radar | Radar | Static + Dynamic | YES | ~LR094877 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Surround Camera System (ClearSight) - All 4 Cameras | Forward Camera | Camera | Static | YES | OEM - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(4 CAMERAS | |
| Wade Sensing (Wading Depth Sensor) | Ultrasonic | Ultrasonic | None | YES | ~LR072773 OR SIMILAR - IN WING MIRROR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Forward Camera, AEB, LKA, ACC, ClearSight Ground View (front cam)
jlr_ids static ADAS calibration after windshield R&R. ClearSight Ground View: if front cam disturbed, full 4-camera calibration required. Verify AEB and LKA DTC-free after.
Front Bumper Repair or Replacement Affected: Front Radar (ACC, Emergency Braking), Front Camera (ClearSight)
jlr_ids radar alignment + front camera calibration if disturbed. Bracket inspection before radar calibration.
Rear Bumper Repair Affected: BSA Radar L/R, Reverse Traffic Detection, Rear Camera (ClearSight)
jlr_ids BSA initialization if sensors disturbed. Rear camera calibration if camera removed.
Mirror Replacement Affected: Side Cameras (ClearSight), Wade Sensing (driver side)
Mirror replacement triggers side camera recalibration (full 4-camera jlr_ids procedure). Driver-side mirror: Wade Sensing initialization required via jlr_ids.
Air Suspension Repair Affected: ASCM, Height Sensors, Air Springs
jlr_ids ASCM calibration + height sensor zero-point calibration after any air suspension component replacement. Level surface required.
Any Module Replacement Affected: BCM, ECM, KVM, TCM, ABS, ASCM, RCM, GWM
jlr_ids programming required on all replaced modules. VIN-tie and variant coding mandatory. KVM: dealer auth required. Battery SOC >=80% before programming. Cascaded updates may occur via Ethernet backbone.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using OEM scan tool.
Any Front-End Collision
Inspect and recalibrate forward radar after any front-end collision using OEM scan tool.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
SRS Modules
Restraints Control Module (RCM) ~LR141756 OR SIMILAR (VERIFY VIA JLR_IDS)
- Part number
- ~LR141756 OR SIMILAR (VERIFY VIA JLR_IDS)
- Location
- Under center console / transmission tunnel
- Manufacturer
- Continental / Autoliv
- Chip / MCU
- Continental or Autoliv
- Notes
- Hard deployment = replace only. jlr_ids does not support crash data clear on L663 RCM - replace only on deployment. After replacement: jlr_ids SRS configuration + DTC clear. VIN-tie required. Mounting torque per WSM. Verify SRS lamp extinguishes.
ECU Modules
ECM - Ingenium P300 3.0L 6-cyl MHEV ~LR127 OR SIMILAR (VERIFY VIA JLR_IDS)
- Part number
- ~LR127 OR SIMILAR (VERIFY VIA JLR_IDS)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental or Bosch (JLR Ingenium OEM)
- Notes
- jlr_ids ECM programming + VIN + KVM immobilizer coding. Battery SOC >=80% required before programming. Throttle adaptation after replacement.
ECM - D300 3.0L Inline-6 Diesel (Td6) ~LR127 (DIESEL VARIANT - VERIFY VIA JLR_IDS)
- Part number
- ~LR127 (DIESEL VARIANT - VERIFY VIA JLR_IDS)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MD1 (diesel)
- Notes
- jlr_ids ECM + VIN + KVM coding. Diesel: DPF regeneration adaptation reset after ECM replacement. Injector coding required (individual cylinder trim codes).
ECM - P400e PHEV (2.0L + Electric Motor)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental (PHEV OEM)
- Notes
- PHEV variant. jlr_ids ECM + HV battery control unit + KVM coding. HV SAFETY: disable HV service disconnect before any HV component work. Minimum 10-minute wait. HV-rated PPE. Trained HV-certified technician required.
TCM - ZF 8-Speed Auto (8HP70)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- ZF OEM
- Notes
- jlr_ids TCM programming + adaptive reset. Full ZF drive cycle for shift adaptation relearn. Fluid level via jlr_ids procedure (sealed unit on L663).
BCM Modules
Body Control Module (BCM) ~LR098019 OR SIMILAR (VERIFY VIA JLR_IDS)
- Part number
- ~LR098019 OR SIMILAR (VERIFY VIA JLR_IDS)
- Security
- AES-256
- Coding required
- Yes
- Cloning supported
- No
- Notes
- jlr_ids programming + full variant configuration required. All vehicle options and build spec must be coded. VIN-tie required. BCM replacement may cascade software updates to other modules via DoIP Ethernet - inform customer of extended programming time.
KVM (Keyless Vehicle Module) ~LR121226 OR SIMILAR (VERIFY VIA JLR_IDS)
- Part number
- ~LR121226 OR SIMILAR (VERIFY VIA JLR_IDS)
- Security
- AES-256
- Coding required
- Yes
- Cloning supported
- No
- Notes
- KVM manages Kessy passive entry and AES-256 immobilizer. Replacement requires jlr_ids + JLR dealer authorization. All registered keys erased - all customer fobs must be present for re-registration. AKL via jlr_ids + JLR dealer auth only.
Gateway Module (GWM)
- Security
- AES-256
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Routes messages across CAN FD, FlexRay, and Ethernet backbone. Replacement: jlr_ids programming. May trigger cascaded software updates across multiple modules.
TCU / TCM Transmission Modules
TCU - 8HP76 8-Speed Auto LR087
- Part number
- LR087
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental TC1797
- Notes
- ZF 8HP76 TCU requires SDD programming, VIN coding, transmission adaptation, ATF ZF LifeGuard 8
TCU - 8HP45 8-Speed Auto LR086
- Part number
- LR086
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental TC1797
- Notes
- ZF 8HP45 TCU requires SDD programming, VIN coding, transmission adaptation, ATF ZF LifeGuard 8
ABS / Brake Modules
ABS/ESC Module (Bosch or Continental) ~LR052139 OR SIMILAR (VERIFY VIA JLR_IDS)
- Part number
- ~LR052139 OR SIMILAR (VERIFY VIA JLR_IDS)
- Cloning supported
- No
- Notes
- jlr_ids ABS/ESC initialization after replacement. Power bleed via jlr_ids. SAS zero-point calibration required. Air suspension vehicles: height sensor calibration via jlr_ids after any suspension or ABS module work.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) LX73-10B955-AE
- Part number
- LX73-10B955-AE
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) LX73-10B955-AF
- Part number
- LX73-10B955-AF
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (SAS in clock spring)
Connectivity & Accessories
PIVI Pro Infotainment (11.4" InControl Touch Pro Duo)
- Notes
- jlr_ids variant configuration after replacement. Android-based OTA-capable. CarPlay/Android Auto.
Air Suspension Control Module (ASCM) ~LR072273 OR SIMILAR (VERIFY VIA JLR_IDS)
- Part number
- ~LR072273 OR SIMILAR (VERIFY VIA JLR_IDS)
- Notes
- jlr_ids ASCM programming + height sensor calibration after replacement. Level vehicle on flat surface for calibration. Air suspension standard on SE/HSE and above. Verify all ride height modes (Access, Normal, Off-Road, Extended Off-Road) via jlr_ids after replacement.
Terrain Response 2 Module
- Notes
- Terrain Response 2 programming via jlr_ids. Auto mode learns terrain - adaptation reset after module replacement. Verify all terrain modes selectable via rotary controller after programming.
IPC (Instrument Panel Cluster)
- Notes
- jlr_ids programming + VIN write after replacement.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEP768
- Notes
- Compatibility label: BCM. BCM Notes: Read/Write
Central Gateway Module
- Manufacturer
- STMicroelectronics
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- SPC564B64L8
- Notes
- BCM Notes: Read/Write
Central Gateway Module
- Manufacturer
- STMicroelectronics
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- ST10F269
- Notes
- Compatibility label: Discovery 3. Chassis lifting module Notes: Read/Write
Central Gateway Module
- Manufacturer
- STMicroelectronics
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- SPC560B60L3
- Notes
- Compatibility label: 2017. RFA Notes: Read/Write, Years: 2017-
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- SPC564B64L8(read-write)
- Notes
- Compatibility label: General model. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Aluminum-intensive monocoque - MLA-professional bench programming tool; high-strength steel reinforcement
- OBD Protocol
- ISO 15765-4 CAN (DoIP/UDS over Ethernet on upper modules)
- CAN Architecture
- JLR Ethernet backbone (DoIP); CAN FD; FlexRay (suspension); OBD2 DLC ISO 15765-4 CAN
- Infotainment
- PIVI Pro (Pivi Pro 11.4" InControl Touch Pro Duo) - Android-based; OTA updates; Apple CarPlay / Android Auto
- OTA Capable
- Yes
- Infotainment Name
- Land Rover Pivi Pro
- Wireless CarPlay
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2020 - 2.0 D200 MHEV, 2.0 P300, 2.0L P300 MHEV (PT204), 3.0 D200 MHEV, 3.0 D250 MHEV, 3.0 D300 MHEV, 3.0 P400 MHEV, 3.0L MHEV (D200), 3.0L MHEV (D250), 3.0L MHEV (D300), D240.
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - land-rover not in openpilot support tree
Not in openpilot support tree as of April 2026. Land Rover / Range Rover not in openpilot support tree.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2020 Land Rover Defender?
ADAS calibration pricing for a 2020 Land Rover Defender depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Front Camera (ClearSight Ground View / Forward ADAS), Front Radar (77GHz, ACC/Emergency Braking), Blind Spot Assist (BSA) - Left Rear Radar, Blind Spot Assist (BSA) - Right Rear Radar, and Surround Camera System (ClearSight) - All 4 Cameras. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2020 Land Rover Defender?
Yes. The 2020 Land Rover Defender uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: ~LR141756 OR SIMILAR (VERIFY VIA JLR_IDS). Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2020 Land Rover Defender?
After windshield replacement on a 2020 Land Rover Defender, Front Camera (ClearSight Ground View / Forward ADAS), Front Radar (77GHz, ACC/Emergency Braking), and Surround Camera System (ClearSight) - All 4 Cameras rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2020 Land Rover Defender module service take?
Most 2020 Land Rover Defender onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 23 programmable modules documented in our database (4 ECU, 3 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2020 Land Rover Defender on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2020 Land Rover Defender. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2020 Land Rover Defender programming?
Every programming, cloning, and calibration job on the 2020 Land Rover Defender is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2020 Land Rover Defender can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2020 Land Rover Defender. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Infotainment on this platform: Land Rover Pivi Pro. Send the VIN and the operations performed and we will confirm support and pricing.
OTHER LAND-ROVER MODELS
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2020 Land-Rover Defender covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- LR152352, LR159028, KY32-9G768-AH-SERIES
- ECU / PCM Part Numbers
- LR135917, LR154391 (M8A2-14C568)
- BCM / Body Module Part Numbers
- ~LR098019 OR SIMILAR (VERIFY VIA JLR_IDS), ~LR121226 OR SIMILAR (VERIFY VIA JLR_IDS)
- TCU / TCM Part Numbers
- LR087, LR086
- SRS / Airbag Module Part Numbers
- LR141756
- ABS / EBCM Part Numbers
- LR052139 (APPROX L663 DEFENDER MLA ABS - VERIFY VIA JLR IDS)
- Instrument Cluster (IPC) Part Numbers
- LX73-10B955-AE, LX73-10B955-AF
- Transmission Control Module (TCM) Part Numbers
- LR087, LR086
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2020 Land Rover Defender
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.