JLR ClearSight Ground View, Terrain Response 2, All-Terrain Progress Control (AT
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065Covers model years 2020-2026 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Land Rover Defender built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
The ADAS, module, and security rows below are consolidated across the full 2020-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2020-2026”.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Land Rover Defender. On this vehicle we cover documented systems include Front Camera (ClearSight Ground View / Forward ADAS), Front Radar (77GHz, ACC/Emergency Braking), and Blind Spot Assist (BSA) - Left Rear Radar, this L663 (Defender, 2020+) - MLA-professional bench programming tool (Modular Longitudinal Architecture) platform vehicle, JLR KVM (Key-less Vehicle Module) AES-256 immobilizer support, Land Rover Pivi Pro infotainment programming. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access.
Verify platform code matches when cross-referencing part numbers across model years.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
JLR SDD / JLR Pathfinder
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
This platform uses JLR Ethernet backbone (DoIP); CAN FD; FlexRay (suspension); OBD2 DLC ISO 15765-4 CAN with ISO 15765-4 CAN (DoIP/UDS over Ethernet on upper modules).
Not supported - land-rover not in openpilot support tree
Not in openpilot support tree as of April 2026. Land Rover / Range Rover not in openpilot support tree.
This page consolidates Land Rover Defender service data for 2020-2026 across 7 model years; 7 years have merged CCT data.
Choose a yearMerged ADAS coverage includes 20 system records, including Front Camera (ClearSight Ground View / Forward ADAS) (2020), Front Radar (77GHz, ACC/Emergency Braking) (2020), Blind Spot Assist (BSA) - Left Rear Radar (2020), and Blind Spot Assist (BSA) - Right Rear Radar (2020). Year-marked systems apply only to the shown range.
View ADAS dataThis generation has 28 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersThe merged generation page indexes 64 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway, immobilizer, and key-security coverage includes 11 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Land Rover Defender 2020-2026 span, with exact-year validation before service.
Get a quoterequired
jlr_ids static ADAS calibration after windshield R&R. ClearSight Ground View: if front cam disturbed, full 4-camera calibration required. Verify AEB and LKA DTC-free after.
required
jlr_ids static ADAS calibration after windshield R&R. ClearSight Ground View: if front cam disturbed, full 4-camera calibration required. Verify AEB and LKA DTC-free after.
required
jlr_ids static ADAS calibration after windshield R&R. ClearSight Ground View: if front cam disturbed, full 4-camera calibration required. Verify AEB and LKA DTC-free after.
required
jlr_ids static ADAS calibration after windshield R&R. ClearSight Ground View: if front cam disturbed, full 4-camera calibration required. Verify AEB and LKA DTC-free after.
required
jlr_ids static ADAS calibration after windshield R&R. ClearSight Ground View: if front cam disturbed, full 4-camera calibration required. Verify AEB and LKA DTC-free after.
required
jlr_ids static ADAS calibration. Full 4-camera calibration if front cam disturbed.
required
jlr_ids static ADAS calibration. Full 4-camera calibration if front cam disturbed.
required
jlr_ids static ADAS calibration. Full 4-camera calibration if front cam disturbed.
required
jlr_ids static ADAS calibration. Full 4-camera calibration if front cam disturbed.
required
jlr_ids static ADAS calibration. Full 4-camera calibration if front cam disturbed.
required
jlr_ids ADAS calibration. Full 4-camera calibration if front cam disturbed.
required
jlr_ids ADAS calibration. Full 4-camera calibration if front cam disturbed.
required
jlr_ids ADAS calibration. Full 4-camera calibration if front cam disturbed.
required
jlr_ids ADAS calibration. Full 4-camera calibration if front cam disturbed.
required
jlr_ids ADAS calibration. 4-camera cal if front cam disturbed.
required
jlr_ids ADAS calibration. 4-camera cal if front cam disturbed.
required
jlr_ids ADAS calibration. 4-camera cal if front cam disturbed.
required
jlr_ids ADAS calibration. 4-camera cal if front cam disturbed.
required
jlr_ids radar alignment + front camera calibration if disturbed. Bracket inspection before radar calibration.
required
jlr_ids radar alignment + front camera calibration if disturbed. Bracket inspection before radar calibration.
required
jlr_ids radar alignment + front camera calibration if disturbed. Bracket inspection before radar calibration.
required
jlr_ids BSA initialization if sensors disturbed. Rear camera calibration if camera removed.
required
jlr_ids BSA initialization if sensors disturbed. Rear camera calibration if camera removed.
required
jlr_ids BSA initialization if sensors disturbed. Rear camera calibration if camera removed.
required
jlr_ids BSA initialization if sensors disturbed. Rear camera calibration if removed.
required
jlr_ids BSA initialization if sensors disturbed. Rear camera calibration if removed.
required
jlr_ids BSA initialization if sensors disturbed. Rear camera calibration if removed.
required
jlr_ids BSA init. Rear camera calibration if removed.
required
jlr_ids BSA init. Rear camera calibration if removed.
required
jlr_ids BSA init if sensors disturbed.
required
Mirror replacement triggers side camera recalibration (full 4-camera jlr_ids procedure). Driver-side mirror: Wade Sensing initialization required via jlr_ids.
required
Mirror replacement triggers side camera recalibration (full 4-camera jlr_ids procedure). Driver-side mirror: Wade Sensing initialization required via jlr_ids.
required
jlr_ids 4-camera calibration + Wade Sensing init on driver-side mirror replacement.
required
jlr_ids 4-camera calibration + Wade Sensing init on driver-side mirror replacement.
required
4-camera jlr_ids calibration + Wade Sensing init (driver side).
required
4-camera jlr_ids calibration + Wade Sensing init (driver side).
required
4-camera cal + Wade Sensing init (driver side).
required
4-camera cal + Wade Sensing init (driver side).
required
4-camera cal + Wade Sensing init.
required
4-camera cal + Wade Sensing init.
required
jlr_ids ASCM calibration + height sensor zero-point calibration after any air suspension component replacement. Level surface required.
required
jlr_ids ASCM calibration + height sensor zero-point calibration after any air suspension component replacement. Level surface required.
required
jlr_ids ASCM calibration + height sensor zero-point calibration after any air suspension component replacement. Level surface required.
required
jlr_ids height sensor calibration after any air suspension work.
required
jlr_ids height sensor calibration after any air suspension work.
required
jlr_ids height sensor calibration.
required
jlr_ids height sensor calibration.
required
jlr_ids programming required on all replaced modules. VIN-tie and variant coding mandatory. KVM: dealer auth required. Battery SOC >=80% before programming. Cascaded updates may occur via Ethernet backbone.
required
jlr_ids programming required on all replaced modules. VIN-tie and variant coding mandatory. KVM: dealer auth required. Battery SOC >=80% before programming. Cascaded updates may occur via Ethernet backbone.
required
jlr_ids programming required on all replaced modules. VIN-tie and variant coding mandatory. KVM: dealer auth required. Battery SOC >=80% before programming. Cascaded updates may occur via Ethernet backbone.
required
jlr_ids programming required on all replaced modules. VIN-tie and variant coding mandatory. KVM: dealer auth required. Battery SOC >=80% before programming. Cascaded updates may occur via Ethernet backbone.
required
jlr_ids programming required on all replaced modules. VIN-tie and variant coding mandatory. KVM: dealer auth required. Battery SOC >=80% before programming. Cascaded updates may occur via Ethernet backbone.
required
jlr_ids programming required on all replaced modules. VIN-tie and variant coding mandatory. KVM: dealer auth required. Battery SOC >=80% before programming. Cascaded updates may occur via Ethernet backbone.
required
jlr_ids programming required on all replaced modules. VIN-tie and variant coding mandatory. KVM: dealer auth required. Battery SOC >=80% before programming. Cascaded updates may occur via Ethernet backbone.
required
jlr_ids programming required on all replaced modules. VIN-tie and variant coding mandatory. KVM: dealer auth required. Battery SOC >=80% before programming. Cascaded updates may occur via Ethernet backbone.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80% SOC. Cascaded updates possible.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80% SOC. Cascaded updates possible.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80% SOC. Cascaded updates possible.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80% SOC. Cascaded updates possible.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80% SOC. Cascaded updates possible.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80% SOC. Cascaded updates possible.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80% SOC. Cascaded updates possible.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
required
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
Yes
Radar module replacement requires alignment/calibration using OEM scan tool.
Yes
Inspect and recalibrate forward radar after any front-end collision using OEM scan tool.
Yes
Inspect and recalibrate forward camera after any front-end collision using OEM scan tool.
Yes
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
required
jlr_ids radar alignment + front camera calibration if disturbed.
required
jlr_ids radar alignment + front camera calibration if disturbed.
required
jlr_ids radar alignment + front camera calibration if disturbed.
required
jlr_ids radar alignment + front camera calibration if disturbed.
required
jlr_ids radar alignment. Bracket inspection.
required
jlr_ids radar alignment. Bracket inspection.
required
jlr_ids radar alignment. Bracket inspection.
Yes
Camera module replacement requires full recalibration using OEM scan tool.
| Year | VIN split | Infotainment | Wireless CarPlay | Wireless Android Auto | Trim notes |
|---|---|---|---|---|---|
| 2020 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Land Rover Pivi Pro | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2021 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Land Rover Pivi Pro | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2022 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Land Rover Pivi Pro | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2023 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Land Rover Pivi Pro | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2024 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Land Rover Pivi Pro | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2025 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Land Rover Pivi Pro | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2026 | VIN pos 4-8 identifies model/body/engine. Land Rover WMI: SAL. Position 4-6 = model code. Position 10 = model year code. | Land Rover Pivi Pro | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
20 ADAS systems documented across 2020-2026. Rows that apply to only part of the generation carry a year badge.
JLR ClearSight Ground View, Terrain Response 2, All-Terrain Progress Control (ATPC), Wade Sensing (wading depth sensor), ClearSight Interior Rear View Mirror (optional), Emergency Braking, Blind Spot Assist, Reverse Traffic Detection, Lane Keep Assist (Lane Keeping Assist), Adaptive Cruise Control with Queue Assist
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Front Camera (ClearSight Ground View / Forward ADAS) 2020 | Forward Camera | Camera | Static | YES | ~LR095221 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Front Radar (77GHz, ACC/Emergency Braking) 2020 | Front Radar | Radar | Static | YES | ~LR102133 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Assist (BSA) - Left Rear Radar 2020 | Side Radar | Radar | Static + Dynamic | YES | ~LR094876 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Assist (BSA) - Right Rear Radar 2020 | Side Radar | Radar | Static + Dynamic | YES | ~LR094877 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Surround Camera System (ClearSight) - All 4 Cameras 2020 | Forward Camera | Camera | Static | YES | OEM - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(4 CAMERAS | |
| Wade Sensing (Wading Depth Sensor) 2020 | Ultrasonic | Ultrasonic | None | YES | ~LR072773 OR SIMILAR - IN WING MIRROR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Camera (Monocular) 2021 | Forward Camera | Camera | Static | YES | ~LR095221 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) 2021-2026 | Front Radar | Radar | Static | YES | ~LR102133 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) 2021-2022 | Side Radar | Radar | Static + Dynamic | YES | ~LR094876 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) 2021-2022 | Side Radar | Radar | Static + Dynamic | YES | ~LR094877 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Surround Camera System (ClearSight) - All 4 Cameras 2021 | Forward Camera | Camera | Static | YES | - | |
| Wade Sensing (Wing Mirror Sensor) 2021 | Ultrasonic | Ultrasonic | None | YES | ~LR072773 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Camera (Monocular) 2022 | Forward Camera | Camera | Static | YES | ~LR095221 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Surround Camera System (ClearSight) - All 4 Cameras 2022 | Forward Camera | Camera | Static | YES | - | |
| Wade Sensing 2022-2026 | Ultrasonic | Ultrasonic | None | YES | ~LR072773 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Camera (Monocular) 2023 | Forward Camera | Camera | Static | YES | ~LR095221 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) 2023-2026 | Side Radar | Radar | Static + Dynamic | YES | ~LR094876 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) 2023-2026 | Side Radar | Radar | Static + Dynamic | YES | ~LR094877 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Surround Camera - 4-Camera ClearSight 2023-2026 | Forward Camera | Camera | Static | YES | - | |
| Forward Camera (Monocular) 2024-2026 | Forward Camera | Camera | Static | YES | ~LR095221 OR SIMILAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationjlr_ids static ADAS calibration after windshield R&R. ClearSight Ground View: if front cam disturbed, full 4-camera calibration required. Verify AEB and LKA DTC-free after.
jlr_ids radar alignment + front camera calibration if disturbed. Bracket inspection before radar calibration.
jlr_ids BSA initialization if sensors disturbed. Rear camera calibration if camera removed.
Mirror replacement triggers side camera recalibration (full 4-camera jlr_ids procedure). Driver-side mirror: Wade Sensing initialization required via jlr_ids.
jlr_ids ASCM calibration + height sensor zero-point calibration after any air suspension component replacement. Level surface required.
jlr_ids programming required on all replaced modules. VIN-tie and variant coding mandatory. KVM: dealer auth required. Battery SOC >=80% before programming. Cascaded updates may occur via Ethernet backbone.
Radar module replacement requires alignment/calibration using OEM scan tool.
Inspect and recalibrate forward radar after any front-end collision using OEM scan tool.
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
jlr_ids static ADAS calibration. Full 4-camera calibration if front cam disturbed.
jlr_ids radar alignment + front camera calibration if disturbed.
jlr_ids BSA initialization if sensors disturbed. Rear camera calibration if removed.
jlr_ids 4-camera calibration + Wade Sensing init on driver-side mirror replacement.
jlr_ids height sensor calibration after any air suspension work.
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80% SOC. Cascaded updates possible.
Camera module replacement requires full recalibration using OEM scan tool.
Inspect and recalibrate forward camera after any front-end collision using OEM scan tool.
jlr_ids ADAS calibration. Full 4-camera calibration if front cam disturbed.
jlr_ids radar alignment. Bracket inspection.
jlr_ids BSA init. Rear camera calibration if removed.
4-camera jlr_ids calibration + Wade Sensing init (driver side).
jlr_ids height sensor calibration.
jlr_ids programming. VIN-tie + variant coding. KVM: dealer auth. Battery >=80%.
jlr_ids ADAS calibration. 4-camera cal if front cam disturbed.
jlr_ids BSA init if sensors disturbed.
4-camera cal + Wade Sensing init (driver side).
jlr_ids programming. VIN-tie + coding. KVM: dealer auth. Battery >=80%.
4-camera cal + Wade Sensing init.
64 documented Land Rover Defender modules across 2020-2026. Open a group for part numbers, programming protocol, security notes, and clone support.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Donor must match part family ~LR127 OR SIMILAR (VERIFY VIA JLR_IDS); VIN-locked
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2023 for this generation
Compatible donor years: 2023
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022-2026 for this generation
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Donor must match part family ~LR121226 OR SIMILAR (VERIFY VIA JLR_IDS); VIN-locked
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022-2026 for this generation
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022-2023 for this generation
Compatible donor years: 2022, 2023
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2022-2023 for this generation
Compatible donor years: 2022, 2023
Donor must match part family LR135978 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2022-2023 for this generation
Compatible donor years: 2022, 2023
Donor must match part family LR136542 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2024-2025 for this generation
Compatible donor years: 2024, 2025
Donor must match part family LR146038 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2024-2025 for this generation
Compatible donor years: 2024, 2025
Donor must match part family LR146042 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2026 for this generation
Compatible donor years: 2026
Donor must match part family LR145259 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2026 for this generation
Compatible donor years: 2026
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022-2026 for this generation
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2020-2023 for this generation
Compatible donor years: 2020, 2021, 2022, 2023
Donor must match part family LX73-10B955-AE - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2022 for this generation
Compatible donor years: 2020, 2021, 2022
Donor must match part family LX73-10B955-AF - requires cloning
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Donor must match part family MX73-10B955-AA - requires cloning
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Donor must match part family MX73-10B955-AB - requires cloning
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021-2026 for this generation
Compatible donor years: 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2023 for this generation
Compatible donor years: 2023
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
11 gateway, immobilizer, and security items documented across 2020-2026.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
JLR KVM (Key-less Vehicle Module) - AES-256; Kessy passive entry; no OBD pin extraction; AKL requires jlr_ids + JLR dealer auth
_years covers only 2020 for this generation
Compatible donor years: 2020
Donor must match part family ~LR121226 OR SIMILAR (VERIFY VIA JLR_IDS); VIN-locked
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022-2026 for this generation
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022-2026 for this generation
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
JLR KVM (Key-less Vehicle Module) AES-256 system. Topix/SDD (JLR Pathfinder) required for key programming and module replacement. No obd pin extraction; akl supported.
Yes. Core Auto Logic supports generation-scoped module programming for the Land Rover Defender (2020-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
The Land Rover Defender (2020-2026) generation currently shows 42 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Restraints Control Module (RCM) (2020), Restraints Control Module (RCM) (2021), and Restraints Control Module (RCM) (2022). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: ~LR141756 OR SIMILAR (VERIFY VIA JLR_IDS) (2020) - confirm for your exact year/VIN.
The merged generation data documents 20 ADAS systems, including Front Camera (ClearSight Ground View / Forward ADAS) (2020), Front Radar (77GHz, ACC/Emergency Braking) (2020), Blind Spot Assist (BSA) - Left Rear Radar (2020), Blind Spot Assist (BSA) - Right Rear Radar (2020), and Surround Camera System (ClearSight) - All 4 Cameras (2020). Calibration triggers include Windshield Replacement (2020), Front Bumper Repair or Replacement (2020), Rear Bumper Repair (2020), and Mirror Replacement (2020). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Yes. The generation data includes 4 SRS records, including Restraints Control Module (RCM) (2020), Restraints Control Module (RCM) (2021), and Restraints Control Module (RCM) (2022). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: ~LR141756 OR SIMILAR (VERIFY VIA JLR_IDS) (2020) - confirm for your exact year/VIN.
No assumption should be made across the full span. The generation page merges rows across 2020-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Yes, where the VIN and security workflow support it. The generation data includes 11 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.