VIN / Build Split
VIN pos 4-8 identifies model/trim/engine/restraint. Kia WMI: 5XY, KND, 5XJ. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2022 Kia Telluride Supported Services
2022 Kia Telluride
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform ON (1st Gen Refresh) - Kia-Hyundai 3rd Gen Unibody, FWD/AWD
- CAN Architecture Kia CAN FD; OBD2 DLC ISO 15765-4 CAN
- Security Kia Transponder System AES-128 rolling code; 315MHz RF (US); no OBD pin extraction; AKL requires GDS + Kia DealerConnect dealer authorization; max 8 keys
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2022 KIA Telluride. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this ON (1st Gen Refresh) - Kia-Hyundai 3rd Gen Unibody, FWD/AWD platform vehicle, Kia Transponder System AES-128 rolling code immobilizer support, Kia UVO infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
ON (1st Gen Refresh) - Kia-Hyundai 3rd Gen Unibody, FWD/AWD
Production
2020-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
Kia CAN FD; OBD2 DLC ISO 15765-4 CAN
YEAR-SPECIFIC NOTES
Infotainment
Kia UVO
Exact-year service summary for 2022 KIA Telluride
ADAS coverage
This 2022 KIA Telluride page documents 6 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Forward Camera Replacement, Front Bumper / Radar Repair or Replacement - SX Prestige (HDA 2), and Front Bumper / Radar Repair or Replacement - non-HDA 2 trims. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 21 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 5 gateway, immobilizer, or key-security records for this 2022 KIA Telluride.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2022 KIA Telluride using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Kia Drive Wise: Automatic Emergency Braking, Lane Keeping Assist System, Lane Fo - Standard; Platform: ON (1st Gen Refresh) - Confirmed
Driver-assist suite
Kia Drive Wise: Automatic Emergency Braking, Lane Keeping Assist System, Lane Following Assist, Highway Driving Assist 2 (Highway Driving Assist 2 on SX Prestige - enhanced), Highway Driving Assist (SX standard), Blind Spot Detection, Rear Cross-Traffic Collision Avoidance, Driver Attention Warning, Smart Cruise Control with Stop & Go
VIN and build split
VIN pos 4-8 identifies model/trim/engine/restraint. Kia WMI: 5XY, KND, 5XJ. Position 4-5 = model. Position 10 = model year code.
Infotainment context
Kia UVO; 10.25" touchscreen standard (SX/SX Prestige updated unit for 2022); Kia Connect UVO; Apple CarPlay + Android Auto
Network and access
CAN: Kia CAN FD; OBD2 DLC ISO 15765-4 CAN
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Hyundai GDS Mobile / Hyundai KDS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2022 Kia Telluride. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
1 module documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
6 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
13 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Kia Drive Wise: Automatic Emergency Braking, Lane Keeping Assist System, Lane Fo
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: ON (1st Gen Refresh)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common KIA Telluride issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - ON (1st Gen Refresh) - Kia-Hyundai 3rd Gen Unibody, FWD/AWD platform uses Kia CAN FD; OBD2 DLC ISO 15765-4 CAN.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Kia Drive Wise: Automatic Emergency Braking, Lane Keeping Assist System, Lane Following Assist, Highway Driving Assist 2 (Highway Driving Assist 2 on SX Prestige - enhanced), Highway Driving Assist (SX standard), Blind Spot Detection, Rear Cross-Traffic Collision Avoidance, Driver Attention Warning, Smart Cruise Control with Stop & Go
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Camera | ADAS | Static | YES | ~99211-S9 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Radar | ADAS | Static + Dynamic | YES | ~99110-S9 (MANDO OR BOSCH - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) | Radar | ADAS | Static + Dynamic | YES | ~99140-S9 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS | Static + Dynamic | YES | ~99150-S9 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| HDA 2 (Highway Driving Assist 2 - SX Prestige only) | Software | ADAS | None | YES | - | |
| Park Distance Control (PDC) | Ultrasonic | ADAS | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement
Drive Wise forward camera static calibration required. GDS ADAS guided procedure. Level surface. Target approx. 2.5m (verify in GDS). 2022: check GDS for ADAS software update before calibration - apply if available.
Forward Camera Replacement
GDS ADAS guided static calibration. Camera initialization + calibration. Check for firmware update via GDS before calibration. Verify AEB/LKAS/LFA/HDA 2 (SX Prestige) DTC-free after.
Front Bumper / Radar Repair or Replacement - SX Prestige (HDA 2)
CRITICAL for SX Prestige: check GDS for radar firmware update before calibration - HDA 2 may require firmware update after radar replacement. GDS radar alignment + ADAS calibration. Verify mounting bracket. Verify AEB/Smart Cruise/HDA 2 DTC-free.
Front Bumper / Radar Repair or Replacement - non-HDA 2 trims
GDS radar alignment + ADAS calibration. Inspect mounting bracket. Verify AEB/Smart Cruise DTC-free.
Rear Bumper / BSM Sensor Replacement
GDS BSD initialization. Function test at 20+ mph. DTC clear. Verify RCCA.
ABS / ESC Module Replacement
GDS initialization + power bleed. SAS zero-point reset. Drive 35+ mph. Verify DTC-free.
Wheel Alignment / Steering Work
GDS SAS zero-point reset. Drive 35+ mph straight.
ECM Replacement
GDS programming (download latest 2022 calibration file) + VIN registration + IMMO coding. Throttle adaptation reset. Verify Drive Wise functions active.
Smart Key ECU Replacement
GDS + Kia DealerConnect dealer authorization. All customer keys present. Register all keys. Verify engine start.
TCM Replacement (A8TR1)
GDS programming + adaptive shift reset. Drive cycle for shift relearn.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using GDS Mobile.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using GDS Mobile.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use GDS Mobile if applicable.
SRS Modules
SRS Control Module (SRSCM) 80100S9010WK
- Part number
- 80100S9010WK
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
ECU Modules
ECM - 3.5L Lambda II V6 GDI (G6DK) ~39110-3C (VERIFY VIA GDS)
- Part number
- ~39110-3C (VERIFY VIA GDS)
- Notes
- GDS ECM programming + VIN registration + IMMO coding. Throttle adaptation reset. 2022: GDS may have updated calibration file vs 2020-2021 - always download latest via GDS.
TCM - 8-Speed Wet-Clutch Auto (A8TR1) ~954 (VERIFY VIA GDS)
- Part number
- ~954 (VERIFY VIA GDS)
- Notes
- GDS TCM programming + adaptive shift reset. Drive cycle for shift relearn. Fluid check after replacement.
10.25" Infotainment Head Unit (updated 2022)
- Notes
- 2022 refresh introduced updated 10.25" unit across SX and SX Prestige. GDS module registration + variant configuration after replacement. Verify 2022-specific unit vs 2020-2021 unit before ordering - not direct interchange without GDS verification.
BCM Modules
Body Control Module (BCM) ~95400-S9 (VERIFY VIA GDS - CONFIRM 2022 REFRESH PART VARIANT)
- Part number
- ~95400-S9 (VERIFY VIA GDS - CONFIRM 2022 REFRESH PART VARIANT)
- Notes
- GDS programming + PROXI-equivalent configuration. 2022 refresh: updated interior features - verify all new comfort/convenience options are properly coded in GDS ICU variant configuration. Updated 10.25" display on SX/SX Prestige may require separate head unit registration (not ICU-dependent but verify via GDS).
Smart Key ECU ~95480-S9 (VERIFY VIA GDS)
- Part number
- ~95480-S9 (VERIFY VIA GDS)
- Notes
- GDS + Kia dealer authorization. All keys erased on replacement. All customer keys required for re-registration.
Power Tailgate Module (if equipped)
- Notes
- GDS initialization + height limit adjustment.
TCU / TCM Transmission Modules
TCU - 8A45 8-Speed Auto 95440-S9
- Part number
- 95440-S9
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental TC1797
- Notes
- Requires CVVL relearn, KDS or GDS tool mandatory, SP-IV ATF spec, shift adaptation reset after programming
ABS / Brake Modules
ABS/ESC Module (HCU + ECU) ~58920-S9 (MANDO - VERIFY VIA GDS)
- Part number
- ~58920-S9 (MANDO - VERIFY VIA GDS)
- Notes
- GDS ABS/ESC initialization + power bleed. SAS zero-point calibration required. Drive straight 35+ mph. Verify no ABS/ESC/VSM DTC.
Steering Angle Sensor (SAS)
- Notes
- GDS SAS zero-point reset after alignment, steering, or ABS/ESC work. Drive 35+ mph straight.
Wheel Speed Sensor - Front Left ~58930-S9 (VERIFY VIA GDS)
- Part number
- ~58930-S9 (VERIFY VIA GDS)
- Notes
- Active WSS. GDS DTC clear + road verify.
Wheel Speed Sensor - Front Right ~58940-S9 (VERIFY VIA GDS)
- Part number
- ~58940-S9 (VERIFY VIA GDS)
- Notes
- Same as front left.
Wheel Speed Sensor - Rear Left ~58950-S9 (VERIFY VIA GDS)
- Part number
- ~58950-S9 (VERIFY VIA GDS)
- Notes
- Same procedure.
Wheel Speed Sensor - Rear Right ~58960-S9 (VERIFY VIA GDS)
- Part number
- ~58960-S9 (VERIFY VIA GDS)
- Notes
- Same procedure.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 94013-S9010
- Part number
- 94013-S9010
- Cloning supported
- Yes
- Notes
- ON refresh IPC 7" analog-digital
Instrument Panel Cluster (IPC) 94013-S9020
- Part number
- 94013-S9020
- Cloning supported
- Yes
- Notes
- ON refresh IPC 12.3" digital cluster
Connectivity & Accessories
Kia Connect UVO
- Notes
- Remote start, stolen vehicle tracking. Active subscription required. DCM replacement: GDS network module registration.
Rear Cross-Traffic Collision Avoidance (RCCA)
- Notes
- BSD radar replacement covers RCCA. Verify RCCA function in reverse.
AWD Coupling Control Unit (if equipped)
- Notes
- GDS AWD variant coding after replacement. Verify DTC clear.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Kia-Hyundai ON Unibody - High-Strength Steel
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Kia CAN FD; OBD2 DLC ISO 15765-4 CAN
- Infotainment
- 10.25" touchscreen standard (SX/SX Prestige updated unit for 2022); Kia Connect UVO; Apple CarPlay + Android Auto
- OTA Capable
- No
- Infotainment Name
- Kia UVO
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2022 - 3.8L V6 GDi 24v (G6DN).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. Telluride not in CARS.md.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2022 KIA Telluride?
ADAS calibration pricing for a 2022 KIA Telluride depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and HDA 2 (Highway Driving Assist 2 - SX Prestige only). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2022 KIA Telluride?
Yes. The 2022 KIA Telluride uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 80100S9010WK. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2022 KIA Telluride?
After windshield replacement on a 2022 KIA Telluride, Forward Camera (Monocular) and Forward Radar (77GHz) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2022 KIA Telluride module service take?
Most 2022 KIA Telluride onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 23 programmable modules documented in our database (3 ECU, 3 BCM, 1 TCU, 6 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2022 KIA Telluride on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2022 KIA Telluride. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2022 KIA Telluride programming?
Every programming, cloning, and calibration job on the 2022 KIA Telluride is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2022 KIA Telluride can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2022 KIA Telluride. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 6 ABS / brake control (EBCM)
- 3 immobilizer / security
- 2 key & fob
- 2 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Infotainment on this platform: Kia UVO. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2022 Kia Telluride covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- ~99110-S9 (MANDO
- ECU / PCM Part Numbers
- 39122-3LNN0, 39122-3LNN1, 39122-3LNN2, 39199-3L000
- BCM / Body Module Part Numbers
- ~95400-S9 (VERIFY VIA GDS - CONFIRM 2022 REFRESH PART VARIANT), ~95480-S9 (VERIFY VIA GDS)
- TCU / TCM Part Numbers
- 95440-S9
- SRS / Airbag Module Part Numbers
- 80100S9010WK
- ABS / EBCM Part Numbers
- 58920-S9
- Instrument Cluster (IPC) Part Numbers
- 94013-S9010, 94013-S9020
- Transmission Control Module (TCM) Part Numbers
- 95440-S9
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2022 Kia Telluride
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.