VIN / Build Split
VIN pos 4-8 identifies model/engine/restraint. Jeep WMI: 1C4 (Jeep). Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2016 Jeep Wrangler Supported Services
2016 Jeep Wrangler
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform Jeep JL (2024 - EcoDiesel Discontinued)
- CAN Architecture CAN-C (500kbps HS-CAN) + LIN bus; 4xe adds HV CAN; OBD2 DLC Pin 6/14 CAN-C 500kbps
- Security Chrysler RFHUB/SKREEM - 128-bit rolling code, 315MHz RF (US); Proximity Entry on Sahara/Rubicon/4xe trims; no OBD PIN extraction; AKL via wiTECH 2.0 + DealerConnect dealer authorization
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2016 Jeep Wrangler. On this vehicle we cover documented systems include Rear View Camera, Forward Camera (Monocular), and Blind Spot Monitor Sensor - Left (BSM), this Jeep JL (2024 - EcoDiesel Discontinued) platform vehicle, WCM / SKIM immobilizer support, Uconnect 4C infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
Jeep JL (2024 - EcoDiesel Discontinued)
Production
2007-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
4WD
Engine
-
CAN Speed
CAN-C (500kbps HS-CAN) + LIN bus; 4xe adds HV CAN; OBD2 DLC Pin 6/14 CAN-C 500kbps
YEAR-SPECIFIC NOTES
Infotainment
Uconnect 4C
Exact-year service summary for 2016 Jeep Wrangler
ADAS coverage
This 2016 Jeep Wrangler page documents 4 ADAS systems, including Rear View Camera, Forward Camera (Monocular), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement (Camera Equipped), BSD Rear Sensor Replacement, BCM or TIPM Replacement, and PCM Replacement (any engine). Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 39 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 5 gateway, immobilizer, or key-security records for this 2016 Jeep Wrangler.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2016 Jeep Wrangler using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
LIMITED ADAS - Standard; Platform: Jeep JL (2024 - Confirmed
Driver-assist suite
LIMITED ADAS - off-road platform. Backup camera standard. Blind Spot Detection optional Sahara/Rubicon/4xe. NO forward radar, NO Automatic Emergency Braking, NO 360-surround.
VIN and build split
VIN pos 4-8 identifies model/engine/restraint. Jeep WMI: 1C4 (Jeep). Position 4-5 = model. Position 10 = model year code.
Infotainment context
Uconnect 4C; Uconnect 5 standard (7" or 8.4" or 12.3"); OTA capable; Apple CarPlay + Android Auto; wireless CarPlay/AA on higher trims
Network and access
CAN: CAN-C (500kbps HS-CAN) + LIN bus; 4xe adds HV CAN; OBD2 DLC Pin 6/14 CAN-C 500kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Stellantis wiTECH 2.0
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2016 Jeep Wrangler. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
4 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
7 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
2 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
3 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
17 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
3 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
11 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
LIMITED ADAS
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: Jeep JL (2024
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Jeep Wrangler issues we resolve on this platform: Rear View Camera, Forward Camera (Monocular), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Jeep JL (2024 - EcoDiesel Discontinued) platform uses CAN-C (500kbps HS-CAN) + LIN bus; 4xe adds HV CAN; OBD2 DLC Pin 6/14 CAN-C 500kbps.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
LIMITED ADAS - off-road platform. Backup camera standard. Blind Spot Detection optional Sahara/Rubicon/4xe. NO forward radar, NO Automatic Emergency Braking, NO 360-surround.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Camera | ADAS | Static | YES | - | |
| Forward Camera (Monocular) | Camera | ADAS | Static | YES | - | |
| Blind Spot Monitor Sensor - Left (BSM) | Radar | ADAS | Static + Dynamic | YES | ~68396-L (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS | Static + Dynamic | YES | ~68396-R (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement (Camera Equipped)
wiTECH forward camera initialization. No AEB on JL - awareness only.
BSD Rear Sensor Replacement
wiTECH BSD initialization. Fixed mount. DTC clear + road verify 20+ mph.
BCM or TIPM Replacement
wiTECH flash + PROXI. Check OTA status first. Tire circumference update mandatory if non-stock tire size.
PCM Replacement (any engine)
wiTECH flash + PROXI. 4xe: HV programming sequence. 392 or V6: throttle adaptation. No diesel PCM on 2024.
HV Battery ECU or Motor ECU Replacement (4xe)
CRITICAL: HV service plug removal (orange handle, rear cargo). HV-qualified technician. wiTECH HV programming. Verify all 4xe modes + charging function.
TCM Replacement
wiTECH flash + PROXI + adaptive reset. 500-mile relearn recommended.
ORC (SRS ECU) Replacement
Replace only after hard deployment. wiTECH initialization. Verify all SRS DTC clear before delivery.
ABS / ESC Module Replacement
wiTECH init + 4-wheel brake bleed + SAS zero-point cal. Drive 25+ mph straight to confirm SAS learning. 4xe: verify regen braking normal.
Lift Kit Install or Tire Size Change
CRITICAL JL procedure: ABS/ESC recalibration via wiTECH required. BCM tire circumference configuration update via wiTECH required. Failure to update can cause ABS false activation, speedometer error, and shift logic issues.
4xe Underbody / Axle / Suspension Service
MANDATORY: Remove HV service plug before any underbody, axle, or suspension work. Verify HV system is de-energized. Post-service: verify 4xe drive modes and regen braking.
OTA Update Check (Uconnect 5)
Check Uconnect 5 OTA update status before module programming sessions. Complete pending OTA updates where possible to avoid module firmware conflicts.
SRS Modules
Occupant Restraint Controller (ORC) 17 records
Under center console
- Part number
- P68046001AD
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68046105AD
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68046204AD
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68046205AD
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68068104AA
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68068104AB
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68068703AA
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68073103AA
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68148024AA
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68148027AA
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68148029AA
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68185855AA
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68185857AA
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68185857AA W
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68185858AA
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68185858AB
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Under center console
- Part number
- P68185860AA
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
ECU Modules
PCM - 2.0L GME 4-Cyl Turbo (ICE or 4xe base engine) 1 record
- Part number
- ~68508 (VERIFY VIA DEALERCONNECT)
- Notes
- wiTECH flash + PROXI. 4xe: HV programming sequence. Throttle adaptation. (verify via wiTECH/DealerConnect)
PCM - 3.6L Pentastar V6 1 record
- Part number
- ~68505 (VERIFY VIA DEALERCONNECT)
- Notes
- wiTECH flash + PROXI. eTorque BSG adaptation if equipped. (verify via wiTECH/DealerConnect)
PCM - 392 Hemi V8 (Rubicon 392) 1 record
- Part number
- ~68512 (VERIFY VIA DEALERCONNECT)
- Notes
- wiTECH flash + PROXI. Throttle adaptation. NOTE: EcoDiesel discontinued 2024 - no diesel PCM on 2024 JL. (verify via wiTECH/DealerConnect)
HV Battery ECU - 4xe PHEV 1 record
- Part number
- ~68510 (VERIFY VIA DEALERCONNECT)
- Notes
- HV service plug removal mandatory. HV-qualified technician required. wiTECH HV programming. Do NOT open HV battery case without HV training. (verify via wiTECH/DealerConnect)
Motor ECU - 4xe PHEV 1 record
- Part number
- ~68511 (VERIFY VIA DEALERCONNECT)
- Notes
- HV service plug removal mandatory. wiTECH HV Motor ECU programming. Verify all 4xe drive modes post-programming. (verify via wiTECH/DealerConnect)
eTorque BSG Module (48V - 3.6L if equipped) 1 record
- Notes
- 48V - disconnect 48V battery before service. wiTECH BSG programming + adaptation reset. (verify via wiTECH/DealerConnect)
TCM - 8HP75 8-Speed Automatic 1 record
- Part number
- ~68513 (VERIFY VIA DEALERCONNECT)
- Notes
- ZF 8HP75. wiTECH flash + PROXI + adaptive reset. 500-mile relearn. (verify via wiTECH/DealerConnect)
BCM Modules
Body Control Module (BCM) ~68503 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68503 (VERIFY VIA DEALERCONNECT)
- Notes
- wiTECH flash + PROXI alignment. VIN tie + all options. Tire circumference parameter critical after lift/tire change. Verify OTA status before BCM work.
TIPM (Totally Integrated Power Module) ~68504 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68504 (VERIFY VIA DEALERCONNECT)
- Notes
- wiTECH flash + PROXI. Verify circuits post-replacement. (verify via wiTECH/DealerConnect)
TCU / TCM Transmission Modules
TCU - NSG370 6-Speed Manual
- Protocol / method
- Virgin Flash
- Coding required
- No
- Cloning supported
- No
- Chip / MCU
- N/A
- Notes
- Manual transmission - no TCU/TCM present
TCU - 42RLE 4-Speed Auto 68089742
- Part number
- 68089742
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental SH7058
- Notes
- Flash with wiTECH, adaptive relearn required, ATF+4 fluid spec, VIN programming mandatory
TCU - NSG370 6-Speed Manual
- Protocol / method
- Virgin
- Coding required
- No
- Cloning supported
- No
- Chip / MCU
- N/A
- Notes
- Manual transmission - no TCU/TCM present
ABS / Brake Modules
ABS/ESC Module (Continental) ~68514 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68514 (VERIFY VIA DEALERCONNECT)
- Notes
- wiTECH init + brake bleed + SAS cal. CRITICAL: Lift or tire change requires ABS/ESC recal + BCM tire circumference update. 4xe: verify regen braking after ABS work. (verify via wiTECH/DealerConnect)
Wheel Speed Sensor - Front (each) OEM (VERIFY VIA DEALERCONNECT BY AXLE - DANA 30 OR 44)
- Part number
- OEM (VERIFY VIA DEALERCONNECT BY AXLE - DANA 30 OR 44)
- Notes
- Active WSS. Torque spec. wiTECH DTC clear + road test 15+ mph. Check harness routing.
Wheel Speed Sensor - Rear (each) OEM (VERIFY VIA DEALERCONNECT BY AXLE - DANA 44 OR 44HD)
- Part number
- OEM (VERIFY VIA DEALERCONNECT BY AXLE - DANA 44 OR 44HD)
- Notes
- Same as front. Verify solid axle harness not stress-damaged from off-road use.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 68243284AD
- Part number
- 68243284AD
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 68243285AD
- Part number
- 68243285AD
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Uconnect 5 (7" / 8.4" / 12.3")
- Notes
- OTA capable. wiTECH programming if replaced. Verify OTA updates completed before service. CarPlay/Android Auto re-pair.
4xe Charging Port / Charge Control Module OEM (VERIFY VIA DEALERCONNECT - 4XE ONLY)
- Part number
- OEM (VERIFY VIA DEALERCONNECT - 4XE ONLY)
- Notes
- HV service plug out before work. wiTECH charge system initialization. (verify via wiTECH/DealerConnect)
Remote Start / Pre-Conditioning (4xe via Uconnect app)
- Notes
- 4xe remote pre-conditioning via Uconnect app. BCM PROXI configuration. Verify Uconnect 5 connected services active.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Body-on-Frame - Solid Front Axle (Dana 30 or 44) + Solid Rear Axle (Dana 44 or 44HD)
- OBD Protocol
- ISO 15765-4 CAN (500 kbps HS-CAN)
- CAN Architecture
- CAN-C (500kbps HS-CAN) + LIN bus; 4xe adds HV CAN; OBD2 DLC Pin 6/14 CAN-C 500kbps
- Infotainment
- Uconnect 5 standard (7" or 8.4" or 12.3"); OTA capable; Apple CarPlay + Android Auto; wireless CarPlay/AA on higher trims
- OTA Capable
- No
- Infotainment Name
- Uconnect 4C
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2016 - 2.8L CRD (RA 428), 2.8L CRD (VM A428), 3.6L V6 Pentastar 24v (ERC).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2016 Jeep Wrangler?
ADAS calibration pricing for a 2016 Jeep Wrangler depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Rear View Camera, Forward Camera (Monocular), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2016 Jeep Wrangler?
Yes. The 2016 Jeep Wrangler uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: P68046001AD. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2016 Jeep Wrangler?
After windshield replacement on a 2016 Jeep Wrangler, Rear View Camera and Forward Camera (Monocular) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2016 Jeep Wrangler module service take?
Most 2016 Jeep Wrangler onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 23 programmable modules documented in our database (7 ECU, 2 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2016 Jeep Wrangler on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2016 Jeep Wrangler. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2016 Jeep Wrangler programming?
Every programming, cloning, and calibration job on the 2016 Jeep Wrangler is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2016 Jeep Wrangler can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2016 Jeep Wrangler. For this vehicle our database documents:
- 7 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 2 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 2 immobilizer / security
- 3 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 4 ADAS module
Infotainment on this platform: Uconnect 4C. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2016 Jeep Wrangler covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 68338000AA
- ECU / PCM Part Numbers
- 68312112AA, 68312113AA
- BCM / Body Module Part Numbers
- ~68503 (VERIFY VIA DEALERCONNECT), ~68504 (VERIFY VIA DEALERCONNECT)
- TCU / TCM Part Numbers
- 68089742
- SRS / Airbag Module Part Numbers
- P68046001AD, P68046105AD, P68046204AD, P68046205AD, P68068104AA, P68068104AB, P68068703AA, P68073103AA, P68148024AA, P68148027AA, P68148029AA, P68185855AA, P68185857AA, P68185857AA W, P68185858AA, P68185858AB, P68185860AA
- ABS / EBCM Part Numbers
- 68249952AC, 68249953AC
- Instrument Cluster (IPC) Part Numbers
- 68243284AD, 68243285AD
- Transmission Control Module (TCM) Part Numbers
- 68089742
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2016 Jeep Wrangler
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
wiTECH 2.0 Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.