JLR Drive Package EVA 2.0
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2017-2026 Jaguar F-Pace Generation Guide
Jaguar F-Pace 1st Gen (2017-2026) ADAS Calibration & Module Programming
Covers model years 2017-2026 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Jaguar F-Pace built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform X761
- CAN Architecture CAN (HS/MS), LIN, MOST (audio), EVA 1.0 network architecture
- Security JLR InControl Key - SDD + factory authorization required
The ADAS, module, and security rows below are consolidated across the full 2017-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2017-2026”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 Jaguar F-Pace. On this vehicle we cover documented systems include Emergency Braking / Pre-Collision Alert, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Blind Spot Monitor (BSM), this X761 platform vehicle, JLR PEPS (Passive Entry Passive Start) - SDD dealer-level required immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
X761
Production
2017-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
AWD
Engine
-
CAN Speed
CAN (HS/MS), LIN, MOST (audio), EVA 1.0 network architecture
Feature availability 4
Immobilizer: KVM / Passive Entry
StandardKey programming requires manufacturer-level tool access. Add key supported.
Platform: X761
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Terrain Response 2
Not ApplicableTerrain Response 2 is Land Rover exclusive - not available on F-Pace.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
JLR SDD / JLR Pathfinder
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses CAN (HS/MS), LIN, MOST (audio), EVA 1.0 network architecture with ISO 15765-4 CAN.
- CAN
- CAN (HS/MS), LIN, MOST (audio), EVA 1.0 network architecture
- OBD
- ISO 15765-4 CAN
can_architecture
Generation service summary for Jaguar F-Pace 1st Gen (2017-2026)
Generation coverage
This page consolidates Jaguar F-Pace service data for 2017-2026 across 10 model years; 10 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 34 system records, including Forward Camera (Monocular) (2017-2018), Forward Radar (77GHz) (2017-2018), Blind Spot Monitor Sensor - Left (BSM) (2017-2018), and Blind Spot Monitor Sensor - Right (BSM) (2017-2018). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 33 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 59 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 8 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Jaguar F-Pace 2017-2026 span, with exact-year validation before service.
Get a quoteDo I need calibration?
Windshield Replacement 16
Forward Camera
2017-2018, 2022-2026required
SDD EVA 2.0 static calibration. JLR-approved glass.
LKA
2017-2018, 2022-2026required
SDD EVA 2.0 static calibration. JLR-approved glass.
AEB
2017-2018, 2022-2026required
SDD EVA 2.0 static calibration. JLR-approved glass.
Forward Camera
2019required
SDD forward camera static calibration required. Use JLR-approved glass. Calibration target setup per workshop manual. Ensure no condensation behind glass before starting calibration session.
Lane Keep Assist
2019required
SDD forward camera static calibration required. Use JLR-approved glass. Calibration target setup per workshop manual. Ensure no condensation behind glass before starting calibration session.
AEB
2019required
SDD forward camera static calibration required. Use JLR-approved glass. Calibration target setup per workshop manual. Ensure no condensation behind glass before starting calibration session.
Emergency Braking
2019required
SDD forward camera static calibration required. Use JLR-approved glass. Calibration target setup per workshop manual. Ensure no condensation behind glass before starting calibration session.
Forward Camera
2020required
SDD forward camera static calibration required. JLR-approved glass only.
LKA
2020required
SDD forward camera static calibration required. JLR-approved glass only.
AEB
2020required
SDD forward camera static calibration required. JLR-approved glass only.
Emergency Braking
2020required
SDD forward camera static calibration required. JLR-approved glass only.
Forward Camera (EVA 2.0)
2021required
SDD static calibration for EVA 2.0 forward camera. JLR-approved glass only. Confirm eye tracking module alignment if dashboard disturbed.
LKA
2021required
SDD static calibration for EVA 2.0 forward camera. JLR-approved glass only. Confirm eye tracking module alignment if dashboard disturbed.
AEB
2021required
SDD static calibration for EVA 2.0 forward camera. JLR-approved glass only. Confirm eye tracking module alignment if dashboard disturbed.
Emergency Braking
2021required
SDD static calibration for EVA 2.0 forward camera. JLR-approved glass only. Confirm eye tracking module alignment if dashboard disturbed.
Eye Tracking (if disturbed)
2021required
SDD static calibration for EVA 2.0 forward camera. JLR-approved glass only. Confirm eye tracking module alignment if dashboard disturbed.
Front Bumper Repair 5
Forward Radar EVA 2.0
2017-2018, 2022-2026required
Radar static aim calibration via SDD.
Forward Radar (ACC
2020required
Radar static aim calibration via SDD. Level surface, curb weight.
AEB)
2020required
Radar static aim calibration via SDD. Level surface, curb weight.
Forward Radar EVA 2.0 (ACC
2021required
Radar static aim calibration via SDD. EVA 2.0 radar part numbers required.
AEB)
2021required
Radar static aim calibration via SDD. EVA 2.0 radar part numbers required.
Rear Bumper Repair 12
BSM EVA 2.0
2017-2018, 2023-2026required
SDD PMI if modules disconnected.
RTD
2017-2018, 2023-2026required
SDD PMI if modules disconnected.
Rear Camera
2017-2018, 2023-2026required
SDD PMI if modules disconnected.
BSM
2020required
SDD PMI for BSM modules if disconnected. Surround camera rear calibration if disturbed.
RTD
2020required
SDD PMI for BSM modules if disconnected. Surround camera rear calibration if disturbed.
Rear Camera
2020required
SDD PMI for BSM modules if disconnected. Surround camera rear calibration if disturbed.
BSM EVA 2.0
2021required
SDD PMI for EVA 2.0 BSM modules if disconnected. Surround camera rear calibration if disturbed.
RTD
2021required
SDD PMI for EVA 2.0 BSM modules if disconnected. Surround camera rear calibration if disturbed.
Rear Camera
2021required
SDD PMI for EVA 2.0 BSM modules if disconnected. Surround camera rear calibration if disturbed.
BSM EVA 2.0
2022required
SDD PMI if modules disconnected. Surround camera calibration if disturbed.
RTD
2022required
SDD PMI if modules disconnected. Surround camera calibration if disturbed.
Rear Camera
2022required
SDD PMI if modules disconnected. Surround camera calibration if disturbed.
Any Module Replacement 4
All EVA 2.0 modules
2017-2018, 2022-2026required
SDD PMI required. EVA 2.0 parts only.
All programmed modules
2019required
SDD PMI required for all replaced modules. VIN coding and variant configuration mandatory. Factory authorization may be required for ECM, PEPS, or BCU replacement.
All programmed modules
2020required
SDD PMI required. Factory authorization may be needed for ECM, PEPS, BCU.
All EVA 2.0 programmed modules
2021required
SDD PMI required. Confirm EVA 2.0 parts - do not mix EVA 1.0 hardware. Factory authorization may be required.
Any Collision 12
RCM EVA 2.0
2017-2018, 2022-2026required
Full SDD scan. RCM crash data review. Calibrate all ADAS.
all ADAS
2017-2018, 2022-2026required
Full SDD scan. RCM crash data review. Calibrate all ADAS.
RCM
2019required
Full system scan via SDD. Crash data in RCM must be reviewed - reset or replace. All ADAS modules must be scanned and calibrated post-repair. Do not clear DTCs without verifying physical integrity of all sensors.
forward camera
2019required
Full system scan via SDD. Crash data in RCM must be reviewed - reset or replace. All ADAS modules must be scanned and calibrated post-repair. Do not clear DTCs without verifying physical integrity of all sensors.
forward radar
2019required
Full system scan via SDD. Crash data in RCM must be reviewed - reset or replace. All ADAS modules must be scanned and calibrated post-repair. Do not clear DTCs without verifying physical integrity of all sensors.
BSM
2019required
Full system scan via SDD. Crash data in RCM must be reviewed - reset or replace. All ADAS modules must be scanned and calibrated post-repair. Do not clear DTCs without verifying physical integrity of all sensors.
surround cameras
2019required
Full system scan via SDD. Crash data in RCM must be reviewed - reset or replace. All ADAS modules must be scanned and calibrated post-repair. Do not clear DTCs without verifying physical integrity of all sensors.
all airbag sensors
2019required
Full system scan via SDD. Crash data in RCM must be reviewed - reset or replace. All ADAS modules must be scanned and calibrated post-repair. Do not clear DTCs without verifying physical integrity of all sensors.
RCM
2020required
Full SDD scan. RCM crash data review - reset or replace. Calibrate all ADAS post-repair.
all ADAS sensors and cameras
2020required
Full SDD scan. RCM crash data review - reset or replace. Calibrate all ADAS post-repair.
RCM EVA 2.0
2021required
Full SDD scan. EVA 2.0 RCM crash data review. Calibrate all ADAS post-repair.
all ADAS sensors
2021required
Full SDD scan. EVA 2.0 RCM crash data review. Calibrate all ADAS post-repair.
Forward Camera Replacement 1
2017-2018
Yes
Camera module replacement requires full recalibration using JLR SDD/Pathfinder.
Forward Radar Replacement 2
2017-2019
Yes
Radar module replacement requires alignment/calibration using JLR SDD/Pathfinder.
2020-2026
Yes
Radar module replacement requires alignment/calibration using JLR SDD/Pathfinder.
BSM Sensor Replacement 2
2017-2019
Yes
Blind spot monitoring sensor replacement requires calibration using JLR SDD/Pathfinder.
2020-2026
Yes
Blind spot monitoring sensor replacement requires calibration using JLR SDD/Pathfinder.
Mirror Replacement 6
2017-2018
Conditional
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use JLR SDD/Pathfinder if applicable.
Surround Camera (side views)
2019required
Side surround camera static calibration required via SDD if mirror assembly replaced. Confirm mirror-fold motor function via SDD self-test.
BSM warning LEDs
2019required
Side surround camera static calibration required via SDD if mirror assembly replaced. Confirm mirror-fold motor function via SDD self-test.
Surround Camera side views
2020required
Side camera static calibration via SDD if mirror assembly replaced.
Surround Camera side views
2021required
Side camera static calibration via SDD. EVA 2.0 part numbers.
2022-2026
Yes
Surround view mirror camera recalibration required after mirror R&R. Use JLR SDD/Pathfinder.
Front Bumper Repair or Replacement 3
Forward Radar (ACC
2019required
Radar static aim calibration via SDD. Vehicle at curb weight on level surface. Inspect radar bracket for damage. Reset adaptive cruise adaptations after calibration.
Emergency Braking
2019required
Radar static aim calibration via SDD. Vehicle at curb weight on level surface. Inspect radar bracket for damage. Reset adaptive cruise adaptations after calibration.
AEB)
2019required
Radar static aim calibration via SDD. Vehicle at curb weight on level surface. Inspect radar bracket for damage. Reset adaptive cruise adaptations after calibration.
Rear Bumper Repair or Replacement 3
BSM
2019required
SDD PMI for BSM modules if disconnected. Surround camera rear calibration if camera disturbed. Confirm radar sensor face is clean and unobstructed after repair.
Rear Traffic Detection
2019required
SDD PMI for BSM modules if disconnected. Surround camera rear calibration if camera disturbed. Confirm radar sensor face is clean and unobstructed after repair.
Rear Camera
2019required
SDD PMI for BSM modules if disconnected. Surround camera rear calibration if camera disturbed. Confirm radar sensor face is clean and unobstructed after repair.
Suspension Height Change or Alignment 2
Forward Radar
2019recommended
Any ride height change requires forward radar re-aim. Confirm within JLR specification post-alignment.
Lane Keep Assist camera angle
2019recommended
Any ride height change requires forward radar re-aim. Confirm within JLR specification post-alignment.
PHEV HV Service (P400e) 3
HV battery
2021required
Manual service disconnect required. HV-trained technicians only. SDD HV calibration procedures apply.
BMS
2021required
Manual service disconnect required. HV-trained technicians only. SDD HV calibration procedures apply.
ECM
2021required
Manual service disconnect required. HV-trained technicians only. SDD HV calibration procedures apply.
Year-by-year details
| Year | VIN split | Infotainment | Wireless CarPlay | Wireless Android Auto | Trim notes |
|---|---|---|---|---|---|
| 2017 | VIN pos 4-8 identifies model/body/engine. Jaguar WMI: SAJ. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |||
| 2018 | VIN pos 4-8 identifies model/body/engine. Jaguar WMI: SAJ. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |||
| 2019 | VIN pos 4-8 identifies model/body/engine. Jaguar WMI: SAJ. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |||
| 2020 | VIN pos 4-8 identifies model/body/engine. Jaguar WMI: SAJ. Position 4-6 = model code. Position 10 = model year code. | Jaguar Pivi Pro | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2021 | VIN pos 4-8 identifies model/body/engine. Jaguar WMI: SAJ. Position 4-6 = model code. Position 10 = model year code. | Jaguar Pivi Pro | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2022 | VIN pos 4-8 identifies model/body/engine. Jaguar WMI: SAJ. Position 4-6 = model code. Position 10 = model year code. | Jaguar Pivi Pro | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2023 | VIN pos 4-8 identifies model/body/engine. Jaguar WMI: SAJ. Position 4-6 = model code. Position 10 = model year code. | Jaguar Pivi Pro | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2024 | VIN pos 4-8 identifies model/body/engine. Jaguar WMI: SAJ. Position 4-6 = model code. Position 10 = model year code. | Jaguar Pivi Pro | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2025 | VIN pos 4-8 identifies model/body/engine. Jaguar WMI: SAJ. Position 4-6 = model code. Position 10 = model year code. | Jaguar Pivi Pro | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2026 | VIN pos 4-8 identifies model/body/engine. Jaguar WMI: SAJ. Position 4-6 = model code. Position 10 = model year code. | Jaguar Pivi Pro | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
What changes across 2017-2026
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
2020
- Infotainment: Jaguar Pivi Pro
- Wireless CarPlay: Yes
2021
- Infotainment: Jaguar Pivi Pro
- Wireless CarPlay: Yes
2022
- Infotainment: Jaguar Pivi Pro
- Wireless CarPlay: Yes
2023
- Infotainment: Jaguar Pivi Pro
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
2024
- Infotainment: Jaguar Pivi Pro
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
2025
- Infotainment: Jaguar Pivi Pro
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
2026
- Infotainment: Jaguar Pivi Pro
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
34 ADAS systems documented across 2017-2026. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
JLR Drive Package - Emergency Braking, Lane Keeping Assist, Blind Spot Monitoring, Rear Traffic Detection, Adaptive Cruise Control, Surround Camera
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) 2017-2018 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (77GHz) 2017-2018 | Front Radar | Radar | Static | YES | - | |
| Blind Spot Monitor Sensor - Left (BSM) 2017-2018 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor Sensor - Right (BSM) 2017-2018 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) 2017-2018 | Lane Keep Assist | Camera | Static | YES | - | |
| Adaptive Cruise Control (ACC) 2017-2018 | Adaptive Cruise Control | Radar | Static | YES | - | |
| Automatic Emergency Braking (AEB) 2017-2018 | Automatic Emergency Braking | Radar | Static | YES | - | |
| Emergency Braking / Pre-Collision Alert 2019 | Forward Radar + Forward Camera | Fused | Static | YES | T4A2961 (RADAR UNIT) | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) 2019 | Forward Camera | Camera | Static | YES | T4A3399 (CAMERA MODULE) | |
| Blind Spot Monitor (BSM) 2019 | Side Radar | Radar | Static + Dynamic | YES | T4A2962 (L), T4A2963 (R) | |
| Rear Traffic Detection (RTD) 2019 | Side Radar | Radar | None | YES | T4A2962 (L), T4A2963 (R) | |
| Surround Camera System 2019 | 360 Camera | Camera | Static | YES | T4K1199 (FRONT), T4K1200 (REAR), T4K1201 (L MIRROR), T4K1202 (R MIRROR) | |
| Adaptive Cruise Control (ACC) 2019 | Forward Radar | Radar | Static | YES | T4A2961 | |
| Emergency Braking / Pre-Collision Alert 2020 | Forward Radar + Forward Camera | Fused | Static | YES | T4A2961 | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) 2020 | Forward Camera | Camera | Static | YES | T4A3399 | |
| Blind Spot Monitor (BSM) 2020 | Side Radar | Radar | Static + Dynamic | YES | T4A2962 (L), T4A2963 (R) | |
| Rear Traffic Detection (RTD) 2020 | Side Radar | Radar | None | YES | T4A2962 (L), T4A2963 (R) | |
| Surround Camera System 2020 | 360 Camera | Camera | Static | YES | T4K1199, T4K1200, T4K1201, T4K1202 | |
| Adaptive Cruise Control (ACC) 2020 | Forward Radar | Radar | Static | YES | T4A2961 | |
| Emergency Braking / Pre-Collision Alert 2021 | Forward Radar + Forward Camera | Fused | Static | YES | J9C20574 (EVA 2.0 RADAR) | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) 2021 | Forward Camera | Camera | Static | YES | J9C20210 (EVA 2.0 CAMERA) | |
| Blind Spot Monitor (BSM) 2021-2022 | Side Radar | Radar | Static + Dynamic | YES | J9C20580 (L), J9C20581 (R) | |
| Rear Traffic Detection (RTD) 2021-2023 | Side Radar | Radar | None | YES | J9C20580 (L), J9C20581 (R) | |
| Surround Camera System 2021 | 360 Camera | Camera | Static | YES | J9C20300 (FRONT), J9C20301 (REAR), J9C20302 (L), J9C20303 (R) | |
| Adaptive Cruise Control (ACC) 2021-2026 | Forward Radar | Radar | Static | YES | J9C20574 | |
| Tobii Eye Tracking (Driver Attention System) 2021 | Interior Camera | Camera | None | YES | J9C20050 | |
| Emergency Braking / Pre-Collision Alert 2022-2023 | Forward Radar + Forward Camera | Fused | Static | YES | J9C20574 (EVA 2.0 RADAR) | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) 2022-2026 | Forward Camera | Camera | Static | YES | J9C20210 | |
| Surround Camera System 2022-2026 | 360 Camera | Camera | Static | YES | J9C20300, J9C20301, J9C20302, J9C20303 | |
| Tobii Eye Tracking 2022 | Interior Camera | Camera | None | YES | J9C20050 | |
| Blind Spot Monitor (BSM) 2023-2026 | Side Radar | Radar | Static + Dynamic | YES | J9C20580 (L), J9C20581 (R) | |
| Tobii Eye Tracking 2023-2026 | Interior Camera | Camera | None | YES | J9C20050 | |
| Emergency Braking / Pre-Collision Alert 2024-2026 | Forward Radar + Forward Camera | Fused | Static | YES | J9C20574 (EVA 2.0 RADAR) | |
| Rear Traffic Detection (RTD) 2024-2026 | Side Radar | Radar | None | YES | J9C20580 (L), J9C20581 (R) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement 2017-2018, 2022-2026 Affected: Forward Camera, LKA, AEB
SDD EVA 2.0 static calibration. JLR-approved glass.
Front Bumper Repair 2017-2018, 2022-2026 Affected: Forward Radar EVA 2.0
Radar static aim calibration via SDD.
Rear Bumper Repair 2017-2018, 2023-2026 Affected: BSM EVA 2.0, RTD, Rear Camera
SDD PMI if modules disconnected.
Any Module Replacement 2017-2018, 2022-2026 Affected: All EVA 2.0 modules
SDD PMI required. EVA 2.0 parts only.
Any Collision 2017-2018, 2022-2026 Affected: RCM EVA 2.0, all ADAS
Full SDD scan. RCM crash data review. Calibrate all ADAS.
Forward Camera Replacement 2017-2018
Camera module replacement requires full recalibration using JLR SDD/Pathfinder.
Forward Radar Replacement 2017-2019
Radar module replacement requires alignment/calibration using JLR SDD/Pathfinder.
BSM Sensor Replacement 2017-2019
Blind spot monitoring sensor replacement requires calibration using JLR SDD/Pathfinder.
Mirror Replacement 2017-2018
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use JLR SDD/Pathfinder if applicable.
Windshield Replacement 2019 Affected: Forward Camera, Lane Keep Assist, AEB, Emergency Braking
SDD forward camera static calibration required. Use JLR-approved glass. Calibration target setup per workshop manual. Ensure no condensation behind glass before starting calibration session.
Front Bumper Repair or Replacement 2019 Affected: Forward Radar (ACC, Emergency Braking, AEB)
Radar static aim calibration via SDD. Vehicle at curb weight on level surface. Inspect radar bracket for damage. Reset adaptive cruise adaptations after calibration.
Rear Bumper Repair or Replacement 2019 Affected: BSM, Rear Traffic Detection, Rear Camera
SDD PMI for BSM modules if disconnected. Surround camera rear calibration if camera disturbed. Confirm radar sensor face is clean and unobstructed after repair.
Mirror Replacement 2019 Affected: Surround Camera (side views), BSM warning LEDs
Side surround camera static calibration required via SDD if mirror assembly replaced. Confirm mirror-fold motor function via SDD self-test.
Suspension Height Change or Alignment 2019 Affected: Forward Radar, Lane Keep Assist camera angle
Any ride height change requires forward radar re-aim. Confirm within JLR specification post-alignment.
Any Module Replacement 2019 Affected: All programmed modules
SDD PMI required for all replaced modules. VIN coding and variant configuration mandatory. Factory authorization may be required for ECM, PEPS, or BCU replacement.
Any Collision 2019 Affected: RCM, forward camera, forward radar, BSM, surround cameras, all airbag sensors
Full system scan via SDD. Crash data in RCM must be reviewed - reset or replace. All ADAS modules must be scanned and calibrated post-repair. Do not clear DTCs without verifying physical integrity of all sensors.
Windshield Replacement 2020 Affected: Forward Camera, LKA, AEB, Emergency Braking
SDD forward camera static calibration required. JLR-approved glass only.
Front Bumper Repair 2020 Affected: Forward Radar (ACC, AEB)
Radar static aim calibration via SDD. Level surface, curb weight.
Rear Bumper Repair 2020 Affected: BSM, RTD, Rear Camera
SDD PMI for BSM modules if disconnected. Surround camera rear calibration if disturbed.
Mirror Replacement 2020 Affected: Surround Camera side views
Side camera static calibration via SDD if mirror assembly replaced.
Any Module Replacement 2020 Affected: All programmed modules
SDD PMI required. Factory authorization may be needed for ECM, PEPS, BCU.
Any Collision 2020 Affected: RCM, all ADAS sensors and cameras
Full SDD scan. RCM crash data review - reset or replace. Calibrate all ADAS post-repair.
Forward Radar Replacement 2020-2026
Radar module replacement requires alignment/calibration using JLR SDD/Pathfinder.
BSM Sensor Replacement 2020-2026
Blind spot monitoring sensor replacement requires calibration using JLR SDD/Pathfinder.
Windshield Replacement 2021 Affected: Forward Camera (EVA 2.0), LKA, AEB, Emergency Braking, Eye Tracking (if disturbed)
SDD static calibration for EVA 2.0 forward camera. JLR-approved glass only. Confirm eye tracking module alignment if dashboard disturbed.
Front Bumper Repair 2021 Affected: Forward Radar EVA 2.0 (ACC, AEB)
Radar static aim calibration via SDD. EVA 2.0 radar part numbers required.
Rear Bumper Repair 2021 Affected: BSM EVA 2.0, RTD, Rear Camera
SDD PMI for EVA 2.0 BSM modules if disconnected. Surround camera rear calibration if disturbed.
Mirror Replacement 2021 Affected: Surround Camera side views
Side camera static calibration via SDD. EVA 2.0 part numbers.
Any Module Replacement 2021 Affected: All EVA 2.0 programmed modules
SDD PMI required. Confirm EVA 2.0 parts - do not mix EVA 1.0 hardware. Factory authorization may be required.
Any Collision 2021 Affected: RCM EVA 2.0, all ADAS sensors
Full SDD scan. EVA 2.0 RCM crash data review. Calibrate all ADAS post-repair.
PHEV HV Service (P400e) 2021 Affected: HV battery, BMS, ECM
Manual service disconnect required. HV-trained technicians only. SDD HV calibration procedures apply.
Rear Bumper Repair 2022 Affected: BSM EVA 2.0, RTD, Rear Camera
SDD PMI if modules disconnected. Surround camera calibration if disturbed.
Mirror Replacement 2022-2026
Surround view mirror camera recalibration required after mirror R&R. Use JLR SDD/Pathfinder.
Modules we program on this generation
59 documented Jaguar F-Pace modules across 2017-2026. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
Restraints Control Module (RCM) Verify by VIN 2017-2018, 2022-2026 J9C20400
_years covers only 2017-2018, 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- J9C20400
- LOCATION
- Under center console, floor tunnel
- MFG
- Continental
- CHIP/MCU
- NXP S32K
- NOTES
- EVA 2.0 RCM. SDD required. Replace if airbags deployed.
Restraints Control Module (RCM) Verify by VIN 2019 T4A2774
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- T4A2774
- LOCATION
- Under center console, floor tunnel
- MFG
- Continental
- CHIP/MCU
- Freescale MPC560xB
- NOTES
- VIN-coded. SDD required for crash data review and clear. Replace if airbags deployed - do not attempt repair. New RCM requires SDD PMI. Install all impact sensors before powering module. DTC B1342 = RCM internal fault.
Restraints Control Module (RCM) Verify by VIN 2020 T4A2774
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- T4A2774
- LOCATION
- Under center console, floor tunnel
- MFG
- Continental
- CHIP/MCU
- Freescale MPC560xB
- NOTES
- VIN-coded. SDD required. Replace if airbags deployed. New RCM requires SDD PMI. Install all impact sensors before power-up.
Restraints Control Module (RCM) Verify by VIN 2021 J9C20400
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- J9C20400
- LOCATION
- Under center console, floor tunnel
- MFG
- Continental
- CHIP/MCU
- NXP S32K
- NOTES
- EVA 2.0 RCM - NOT interchangeable with pre-2021 part. VIN-coded. SDD required. Replace if airbags deployed. New unit requires SDD PMI.
ECU MODULES
ECU Modules
ECM - 2.0T Ingenium (P250/P300) x2
J9C20200 Verify by VIN 2017-2018, 2022-2026 Professional Diagnostic Tool
_years covers only 2017-2018, 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2022, 2023, 2024, 2025, 2026
Donor must match part family J9C20200 - requires cloning
Always match the full part number before buying a used module.
- PART
- J9C20200
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch MD1
- NOTES
- SDD programming. JLR authorization required.
J9C20200 Verify by VIN 2021 Professional Diagnostic Tool
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Donor must match part family J9C20200 - requires cloning
Always match the full part number before buying a used module.
- PART
- J9C20200
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch MD1 (Ingenium)
- NOTES
- EVA 2.0 ECM. SDD programming. JLR authorization required. Confirm P250 vs P300 variant before ordering.
ECM + BMS - P400e PHEV x3
J9C20201 Verify by VIN 2017-2018, 2022, 2024-2026 Professional Diagnostic Tool
_years covers only 2017-2018, 2022, 2024-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2022, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- J9C20201
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Bosch MD1 + HV BMS
- NOTES
- HV safety mandatory. SDD PMI for ECM and BMS. HV-trained technicians only.
J9C20201 Verify by VIN 2021 Professional Diagnostic Tool
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- J9C20201
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Bosch MD1 + HV BMS
- NOTES
- PHEV variant. HV battery management - do not service without HV safety training. Separate BMS module. SDD PMI required for both ECM and BMS. HV safety: manual service disconnect required before battery-adjacent work.
J9C20201 Verify by VIN 2023 Professional Diagnostic Tool
_years covers only 2023 for this generation
Used/donor module guide
Compatible donor years: 2023
Always match the full part number before buying a used module.
- PART
- J9C20201
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Bosch MD1 + HV BMS
- NOTES
- HV safety mandatory. SDD PMI for both ECM and BMS.
TCM - 8HP (EVA 2.0) x2
J9C20202 Verify by VIN 2017-2018, 2022-2026 Professional Diagnostic Tool
_years covers only 2017-2018, 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2022, 2023, 2024, 2025, 2026
Donor must match part family J9C20202 - requires cloning
Always match the full part number before buying a used module.
- PART
- J9C20202
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- ZF / Bosch
- NOTES
- Adaptations reset post-replacement.
J9C20202 Verify by VIN 2021 Professional Diagnostic Tool
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Donor must match part family J9C20202 - requires cloning
Always match the full part number before buying a used module.
- PART
- J9C20202
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- ZF / Bosch
- NOTES
- ZF 8HP EVA 2.0 compatible TCM. Adaptations reset required post-replacement.
Engine Control Module (ECM) - 2.0T Ingenium Verify by VIN 2019 x1
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family T4A1620 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4A1620
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch MD1 (Ingenium)
- NOTES
- SDD Programming Port or JLR SDD interface required. VIN write and variant coding via SDD. Battery SOC must be adequate before programming. Ingenium ECM is dealer-sourced and requires JLR authorization code for full PMI.
Engine Control Module (ECM) - 3.0T SC V6 Verify by VIN 2019 x1
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family T4A1621 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4A1621
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch ME17
- NOTES
- Same SDD procedure as 2.0T. V6 supercharged variant. Confirm engine suffix before ordering. JLR authorization required.
Engine Control Module (ECM) - 5.0L SC V8 (SVR) Verify by VIN 2019 x1
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family T4A1622 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4A1622
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch ME17
- NOTES
- SVR variant. High-performance calibration file - do not substitute standard F-Pace V8 tune. SDD PMI + JLR authorization.
Transmission Control Module (TCM) - 8HP Verify by VIN 2019 x1
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family T4A2810 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4A2810
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- ZF / Bosch
- NOTES
- ZF 8HP automatic. SDD required for PMI and transmission adaptations reset after replacement. Adaptation reset required after clutch or valve body work.
ECM - 2.0T Ingenium Verify by VIN 2020 x1
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family T4A1620 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4A1620
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch MD1
- NOTES
- SDD Programming Port or JLR SDD interface. VIN write and variant coding. JLR authorization required.
ECM - 3.0T SC V6 Verify by VIN 2020 x1
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family T4A1621 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4A1621
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch ME17
- NOTES
- Same SDD procedure as 2.0T. JLR authorization required.
ECM - 5.0L SC V8 (SVR) Verify by VIN 2020 x1
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family T4A1622 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4A1622
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch ME17
- NOTES
- SVR high-performance calibration - do not substitute standard tune.
TCM - 8HP Verify by VIN 2020 x1
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family T4A2810 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4A2810
- PROTOCOL
- Professional Diagnostic Tool
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- ZF / Bosch
- NOTES
- ZF 8HP. SDD PMI + transmission adaptations reset required.
BCM MODULES
BCM Modules
Body Control Unit (BCU) - EVA 2.0 x2
J9C20100 Verify by VIN 2017-2018, 2022-2026
_years covers only 2017-2018, 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2022, 2023, 2024, 2025, 2026
Donor must match part family J9C20100 - requires cloning
Always match the full part number before buying a used module.
- PART
- J9C20100
- SECURITY
- proprietary_jlr_eva2
- CODING
- Yes
- CLONE
- Yes
- NOTES
- SDD PMI and variant coding. Factory authorization recommended.
J9C20100 Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Donor must match part family J9C20100 - requires cloning
Always match the full part number before buying a used module.
- PART
- J9C20100
- SECURITY
- proprietary_jlr_eva2
- CODING
- Yes
- CLONE
- Yes
- NOTES
- EVA 2.0 BCU. SDD PMI and variant coding required. Not interchangeable with pre-2021 BCU. Factory authorization recommended.
Central Junction Box (CJB) - EVA 2.0 x3
J9C20101 Verify by VIN 2017-2018, 2023-2026
_years covers only 2017-2018, 2023-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- J9C20101
- SECURITY
- proprietary_jlr_eva2
- CODING
- Yes
- CLONE
- No
- NOTES
- SDD required.
J9C20101 Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- J9C20101
- SECURITY
- proprietary_jlr_eva2
- CODING
- Yes
- CLONE
- No
- NOTES
- EVA 2.0 CJB. SDD required. Updated fuse/relay architecture vs pre-2021.
J9C20101 Verify by VIN 2022
_years covers only 2022 for this generation
Used/donor module guide
Compatible donor years: 2022
Always match the full part number before buying a used module.
- PART
- J9C20101
- SECURITY
- proprietary_jlr_eva2
- CODING
- Yes
- CLONE
- No
- NOTES
- SDD required for replacement.
Body Control Module (BCM) x2
T4K1010 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family T4K1010 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4K1010
- SECURITY
- proprietary_jlr
- CODING
- Yes
- CLONE
- Yes
- NOTES
- SDD required for PMI and configuration. Stores vehicle configuration, lighting parameters, and comfort settings. New BCU requires SDD variant coding. Clone transfers configuration. Factory authorization recommended for security-linked programming.
T4K1010 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family T4K1010 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4K1010
- SECURITY
- proprietary_jlr
- CODING
- Yes
- CLONE
- Yes
- NOTES
- SDD PMI and variant coding required. Clone transfers configuration. Factory authorization recommended for security-linked programming.
Central Junction Box (CJB) x2
T4A2520 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- T4A2520
- SECURITY
- proprietary_jlr
- CODING
- Yes
- CLONE
- No
- NOTES
- Main fuse and relay distribution. SDD required for diagnostics and replacement procedure. Do not replace without SDD active session - risk of incorrect fuse map.
T4A2520 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- T4A2520
- SECURITY
- proprietary_jlr
- CODING
- Yes
- CLONE
- No
- NOTES
- Main fuse/relay distribution. SDD required for replacement procedure.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - ZF 8HP45 8-Speed Auto Verify by VIN 2017-2018 GX73-7Z369
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Donor must match part family GX73-7Z369 - requires cloning
Always match the full part number before buying a used module.
- PART
- GX73-7Z369
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Infineon TC1797
- NOTES
- ZF 8HP45 transmission, requires SDD programming and transmission adaptation, ATF spec ZF LifeguardFluid 8, shift point relearn 50+ miles driving
TCU - ZF 8HP70 8-Speed Auto Verify by VIN 2017-2018 GX73-7Z369
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Donor must match part family GX73-7Z369 - requires cloning
Always match the full part number before buying a used module.
- PART
- GX73-7Z369
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Infineon TC1797
- NOTES
- ZF 8HP70 transmission for V6/V8 variants, requires SDD programming and transmission adaptation, ATF spec ZF LifeguardFluid 8, shift point relearn required
TCU - ZF 8HP70 8-Speed Auto Verify by VIN 2019-2020 GX73-7H105
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Donor must match part family GX73-7H105 - requires cloning
Always match the full part number before buying a used module.
- PART
- GX73-7H105
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC297
- NOTES
- Requires SDD programming, VIN coding, adaptive learning drive cycle, ZF LifeguardFluid 8 ATF specification
TCU - ZF 8HP45 8-Speed Auto Verify by VIN 2019-2020 GX73-7H105
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Donor must match part family GX73-7H105 - requires cloning
Always match the full part number before buying a used module.
- PART
- GX73-7H105
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC297
- NOTES
- Requires SDD programming, VIN coding, adaptive learning drive cycle, ZF LifeguardFluid 8 ATF specification
TCU - ZF 8HP45 8-Speed Auto Verify by VIN 2021-2026 T4A38645
_years covers only 2021-2026 for this generation
Used/donor module guide
Compatible donor years: 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family T4A38645 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4A38645
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC297
- NOTES
- ZF 8HP45 transmission. Requires SDD/Pathfinder programming. VIN coding and adaptation required. ZF LifeguardFluid 8 ATF spec. Shift point relearn via 30+ mile drive cycle.
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/ESC Module - EVA 2.0 Verify by VIN 2017-2018, 2022-2026 J9C20450
_years covers only 2017-2018, 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2022, 2023, 2024, 2025, 2026
Donor must match part family J9C20450 - requires cloning
Always match the full part number before buying a used module.
- PART
- J9C20450
- CLONE
- Yes
- NOTES
- SDD PMI required. Automated bleed in SDD.
ABS/ESC Module (Bosch 9.3) Verify by VIN 2019 T4A2450
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family T4A2450 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4A2450
- CLONE
- Yes
- NOTES
- Bosch 9.3 on X761. SDD PMI required on replacement. Automated bleed cycle available in SDD. Confirm wheel speed sensor integrity before condemning ABS module. DTC C1095 common if pump motor fault.
ABS/ESC Module (Bosch 9.3) Verify by VIN 2020 T4A2450
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family T4A2450 - requires cloning
Always match the full part number before buying a used module.
- PART
- T4A2450
- CLONE
- Yes
- NOTES
- SDD PMI required. Automated bleed cycle available in SDD. Verify wheel speed sensors before replacing module.
ABS/ESC Module - EVA 2.0 Verify by VIN 2021 J9C20450
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Donor must match part family J9C20450 - requires cloning
Always match the full part number before buying a used module.
- PART
- J9C20450
- CLONE
- Yes
- NOTES
- EVA 2.0 ABS/ESC unit. SDD PMI required. Automated bleed available in SDD. Different part from pre-2021.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) Verify by VIN 2017-2019 LR069929
_years covers only 2017-2019 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2019
Donor must match part family LR069929 - requires cloning
Always match the full part number before buying a used module.
- PART
- LR069929
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2020-2026 LX73-10B955-AA
_years covers only 2020-2026 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family LX73-10B955-AA - requires cloning
Always match the full part number before buying a used module.
- PART
- LX73-10B955-AA
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2020-2026 LX73-10B955-AB
_years covers only 2020-2026 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family LX73-10B955-AB - requires cloning
Always match the full part number before buying a used module.
- PART
- LX73-10B955-AB
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN 2017-2019
_years covers only 2017-2019 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2019
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS) Verify by VIN 2017-2019
_years covers only 2017-2019 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2019
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- cross-year extension)
Steering Angle Sensor (SAS) Verify by VIN 2020-2026
_years covers only 2020-2026 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (SAS in clock spring)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Other x16
J9C20010 Verify by VIN 2017-2018, 2024-2026
_years covers only 2017-2018, 2024-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- J9C20010
- NOTES
- SDD PMI. OTA capable. Confirm latest firmware version.
J9C20011 Verify by VIN 2017-2018, 2023-2026
_years covers only 2017-2018, 2023-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- J9C20011
- NOTES
- SDD PMI.
T4N00845 Verify by VIN 2017-2018, 2022-2026
_years covers only 2017-2018, 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- T4N00845
- NOTES
- SDD required. Factory authorization for AKL.
T4K1005 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- T4K1005
- NOTES
- Pre-facelift 2019 unit. SDD PMI required. Navigation SD card separate. Not compatible with 2021+ Pivi Pro replacement hardware.
T4A2600 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- T4A2600
- NOTES
- SDD PMI required. Mileage stored in cluster and BCU - confirm transfer during replacement. 12.3-inch display standard.
T4K1050 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- T4K1050
- NOTES
- SDD configuration required. Aim adjustment post-replacement. Available as factory option.
T4N00844 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- T4N00844
- NOTES
- InControl Key system. SDD required for programming. Factory authorization required for AKL.
T4K1005 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- T4K1005
- NOTES
- Pre-facelift unit. SDD PMI required. Not compatible with Pivi Pro 2021+ hardware.
T4A2600 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- T4A2600
- NOTES
- SDD PMI required. Confirm mileage transfer.
T4N00844 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- T4N00844
- NOTES
- SDD required. Factory authorization required for AKL.
J9C20010 Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- J9C20010
- NOTES
- New for 2021 facelift. SDD PMI required. Over-the-air update capable. Not backward compatible with pre-2021 InControl Touch Pro.
J9C20011 Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- J9C20011
- NOTES
- SDD PMI required. Mileage confirm during replacement.
J9C20012 Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- J9C20012
- NOTES
- Available option on 2021+ facelift. SDD configuration required.
T4N00845 Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- T4N00845
- NOTES
- Updated key for EVA 2.0. SDD required. Factory authorization for AKL.
J9C20010 Verify by VIN 2022-2023
_years covers only 2022-2023 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023
Always match the full part number before buying a used module.
- PART
- J9C20010
- NOTES
- SDD PMI. OTA capable.
J9C20011 Verify by VIN 2022
_years covers only 2022 for this generation
Used/donor module guide
Compatible donor years: 2022
Always match the full part number before buying a used module.
- PART
- J9C20011
- NOTES
- SDD PMI. Mileage confirm.
8 gateway, immobilizer, and security items documented across 2017-2026.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System JLR PEPS (Passive Entry Passive Start) - SDD dealer-level required
- Add Key Yes
- All Keys Lost Yes
JLR InControl Key - SDD + factory authorization required
IMMOBILIZER MODULES
Immobilizer Modules
JLR PEPS - EVA 2.0 Verify by VIN 2017-2018, 2022-2026 J9C20102
_years covers only 2017-2018, 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- J9C20102
- SECURITY
- jlr_incontrol_key_eva2
- NOTES
- SDD required. AKL requires JLR factory authorization.
JLR Passive Entry Passive Start (PEPS) Verify by VIN 2019 T4K1011
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- T4K1011
- SECURITY
- jlr_incontrol_key
- NOTES
- SDD required for all key learning procedures. AKL (All Keys Lost) requires SDD + JLR factory authorization - expensive procedure. PEPS module programming must precede key learning. Do not attempt with generic IMMO tools.
JLR PEPS Verify by VIN 2020 T4K1011
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- T4K1011
- SECURITY
- jlr_incontrol_key
- NOTES
- SDD required for key learning. AKL requires factory authorization. Do not attempt with generic tools.
JLR PEPS - EVA 2.0 Verify by VIN 2021 J9C20102
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- J9C20102
- SECURITY
- jlr_incontrol_key_eva2
- NOTES
- EVA 2.0 PEPS. SDD required. AKL requires JLR factory authorization. Do not attempt with generic tools.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob Verify by VIN 2017-2018, 2022-2026 T4N00845
_years covers only 2017-2018, 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- T4N00845
- NOTES
- SDD required. AKL requires JLR factory authorization.
Proximity Smart Key Fob Verify by VIN 2019 T4N00844
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- T4N00844
- NOTES
- SDD required for key learning. Minimum 2 working keys for add-key procedure. AKL requires JLR factory authorization and SDD dealer-level access. Key blade: HU101. Remote start fob variant available on equipped vehicles.
Proximity Smart Key Fob Verify by VIN 2020 T4N00844
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- T4N00844
- NOTES
- SDD required. Minimum 2 keys for add-key. AKL requires JLR factory authorization.
Proximity Smart Key Fob Verify by VIN 2021 T4N00845
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- T4N00845
- NOTES
- SDD required. Minimum 2 keys for add-key. AKL requires JLR factory authorization.
Replacement Notes
JLR PEPS (Passive Entry Passive Start) - SDD dealer-level required system. Topix/SDD (JLR Pathfinder) required for key programming and module replacement. Pin code extractable via obd; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel unibody with aluminium hood and tailgate
- OBD Protocol
- ISO 15765-4 CAN
- CAN Architecture
- CAN (HS/MS), LIN, MOST (audio), EVA 1.0 network architecture
- Infotainment
- InControl Touch Pro (10-inch) - pre-facelift 2019
- OTA Capable
- No
- ECU Unlock Supported
- Yes
- Custom Programming
- Yes
WHAT WE RESOLVE
1st Gen (2017-2026) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Camera (Monocular) (2017-2018), Forward Radar (77GHz) (2017-2018), Blind Spot Monitor Sensor - Left (BSM) (2017-2018), and Blind Spot Monitor Sensor - Right (BSM) (2017-2018). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve Restraints Control Module (RCM) (2017-2018, 2022-2026), Restraints Control Module (RCM) (2019), and Restraints Control Module (RCM) (2020). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 8 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Jaguar F-Pace (2017-2026) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Jaguar F-Pace (2017-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Jaguar F-Pace (2017-2026)?
The Jaguar F-Pace (2017-2026) generation currently shows 37 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Restraints Control Module (RCM) (2017-2018, 2022-2026), Restraints Control Module (RCM) (2019), and Restraints Control Module (RCM) (2020). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: J9C20400 (2017-2018, 2022-2026) - confirm for your exact year/VIN.
Does Jaguar F-Pace (2017-2026) need ADAS calibration after glass or collision work?
The merged generation data documents 34 ADAS systems, including Forward Camera (Monocular) (2017-2018), Forward Radar (77GHz) (2017-2018), Blind Spot Monitor Sensor - Left (BSM) (2017-2018), Blind Spot Monitor Sensor - Right (BSM) (2017-2018), and Lane Keep Assist / Lane Departure Warning (LKA/LDW) (2017-2018). Calibration triggers include Windshield Replacement (2017-2018, 2022-2026), Front Bumper Repair (2017-2018, 2022-2026), Rear Bumper Repair (2017-2018, 2023-2026), and Any Module Replacement (2017-2018, 2022-2026). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Jaguar F-Pace (2017-2026)?
Yes. The generation data includes 4 SRS records, including Restraints Control Module (RCM) (2017-2018, 2022-2026), Restraints Control Module (RCM) (2019), and Restraints Control Module (RCM) (2020). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: J9C20400 (2017-2018, 2022-2026) - confirm for your exact year/VIN.
Do all Jaguar F-Pace (2017-2026) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2017-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Jaguar F-Pace (2017-2026)?
Yes, where the VIN and security workflow support it. The generation data includes 8 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Jaguar F-Pace (2017-2026)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Jaguar F-Pace (2017-2026) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
More F-Pace generations
1st Gen 2017-2026 You are here