We provide the software and equipment for the agreed work. The exact tool and procedure depend on your year, VIN and module.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
11th Gen FE - 2022-2026 generation coverage
2022-2026 Honda Civic service guide ADAS Calibration & Module Programming
Choose a repair service below or find your module by part number. Onsite help is available in Dallas-Fort Worth, with mail-in module service nationwide.
What do you need fixed?
Choose a service to start your quote.
Find your module
87 documented Honda Civic module records across the 2022-2026 generation. Search by module name or part number, then open a result for requirements and repair options.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ECU / Engine
ECM - 1.5L L15BE VTEC Turbo (11th Gen) 2 records
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, driver (left) side near the intake; the unit carries a Honda PCM part number beginning 37820 on a label.
Accessed from under the hood on the driver-side intake area; air intake/ducting and an electrical cover typically come off to reach the connectors. Hybrid (eHEV) and CVT/turbo variants package powertrain control differently - verify by trim.
Connector notes: Honda PCM part number format 37820-xxx-xxx printed on a label on the unit; replacement PCM normally requires Honda re-flash/immobilizer registration.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- 37820-6A0-A76
- Notes
- 11th Gen Civic 1.5T ECM (L15BE engine - updated variant from 10th gen L15B7). HDS flash programming + VIN registration + IMMO seed write. Throttle position initialization + idle learn via HDS. Verify no powertrain DTCs post-programming. Do NOT use L15B7 (10th gen) calibration files. 11th gen scan tool flows required.
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, driver (left) side near the intake; the unit carries a Honda PCM part number beginning 37820 on a label.
Accessed from under the hood on the driver-side intake area; air intake/ducting and an electrical cover typically come off to reach the connectors. Hybrid (eHEV) and CVT/turbo variants package powertrain control differently - verify by trim.
Connector notes: Honda PCM part number format 37820-xxx-xxx printed on a label on the unit; replacement PCM normally requires Honda re-flash/immobilizer registration.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- 37820-6A0-A76
- Notes
- HDS flash + VIN + IMMO seed write + throttle init + idle learn. 11th gen L15BE calibration file. Verify no powertrain DTCs post-programming.
ECM - 2.0L K20C4 Naturally Aspirated (LX/Sport base) Verify by VIN 2022 1 record
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, driver (left) side near the intake; the unit carries a Honda PCM part number beginning 37820 on a label.
Accessed from under the hood on the driver-side intake area; air intake/ducting and an electrical cover typically come off to reach the connectors. Hybrid (eHEV) and CVT/turbo variants package powertrain control differently - verify by trim.
Connector notes: Honda PCM part number format 37820-xxx-xxx printed on a label on the unit; replacement PCM normally requires Honda re-flash/immobilizer registration.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- FL K20C4 ECM - VERIFY VIA HDS)
- Notes
- Base 2022 Civic K20C4 2.0L NA ECM. HDS flash + VIN + IMMO seed write. Throttle init + idle learn. Verify correct K20C4 calibration file via HDS VIN lookup. Do not cross-apply L15BE file.
CVT Control Unit (11th Gen) 2 records
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, driver (left) side near the intake; the unit carries a Honda PCM part number beginning 37820 on a label.
Accessed from under the hood on the driver-side intake area; air intake/ducting and an electrical cover typically come off to reach the connectors. Hybrid (eHEV) and CVT/turbo variants package powertrain control differently - verify by trim.
Connector notes: Honda PCM part number format 37820-xxx-xxx printed on a label on the unit; replacement PCM normally requires Honda re-flash/immobilizer registration.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Notes
- HDS CVT programming after replacement. Honda HCF-2 fluid only. CVT fill level via HDS. 50-100 mile adaptive relearn.
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, driver (left) side near the intake; the unit carries a Honda PCM part number beginning 37820 on a label.
Accessed from under the hood on the driver-side intake area; air intake/ducting and an electrical cover typically come off to reach the connectors. Hybrid (eHEV) and CVT/turbo variants package powertrain control differently - verify by trim.
Connector notes: Honda PCM part number format 37820-xxx-xxx printed on a label on the unit; replacement PCM normally requires Honda re-flash/immobilizer registration.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Notes
- HDS CVT programming. Honda HCF-2 fluid only. 50-100 mile adaptive relearn.
ECM - 2.0L K20C4 NA (LX/Sport base) 2 records
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, driver (left) side near the intake; the unit carries a Honda PCM part number beginning 37820 on a label.
Accessed from under the hood on the driver-side intake area; air intake/ducting and an electrical cover typically come off to reach the connectors. Hybrid (eHEV) and CVT/turbo variants package powertrain control differently - verify by trim.
Connector notes: Honda PCM part number format 37820-xxx-xxx printed on a label on the unit; replacement PCM normally requires Honda re-flash/immobilizer registration.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- FL K20C4 ECM - VERIFY VIA HDS)
- Notes
- HDS flash + VIN + IMMO seed write. K20C4-specific calibration via HDS VIN lookup. Throttle init + idle learn. Verify K20C4 powertrain function.
Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, driver (left) side near the intake; the unit carries a Honda PCM part number beginning 37820 on a label.
Accessed from under the hood on the driver-side intake area; air intake/ducting and an electrical cover typically come off to reach the connectors. Hybrid (eHEV) and CVT/turbo variants package powertrain control differently - verify by trim.
Connector notes: Honda PCM part number format 37820-xxx-xxx printed on a label on the unit; replacement PCM normally requires Honda re-flash/immobilizer registration.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- FL K20C4 ECM - VERIFY VIA HDS)
- Notes
- HDS flash + VIN + IMMO seed. K20C4 calibration via HDS VIN lookup. Throttle init + idle learn. Verify K20C4 function.
ECM - 1.5L L15BE VTEC Turbo (11th Gen gas) Verify by VIN 2024-2026 1 record
Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, driver (left) side near the intake; the unit carries a Honda PCM part number beginning 37820 on a label.
Accessed from under the hood on the driver-side intake area; air intake/ducting and an electrical cover typically come off to reach the connectors. Hybrid (eHEV) and CVT/turbo variants package powertrain control differently - verify by trim.
Connector notes: Honda PCM part number format 37820-xxx-xxx printed on a label on the unit; replacement PCM normally requires Honda re-flash/immobilizer registration.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- 37820-6A0-A76
- Notes
- HDS flash + VIN + IMMO seed write + throttle init + idle learn. 11th gen L15BE calibration file. Verify no powertrain DTCs post-programming.
HV ECU (e:HEV Hybrid - 2024 Civic only) Verify by VIN 2024-2026 1 record
Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, driver (left) side near the intake; the unit carries a Honda PCM part number beginning 37820 on a label.
Accessed from under the hood on the driver-side intake area; air intake/ducting and an electrical cover typically come off to reach the connectors. Hybrid (eHEV) and CVT/turbo variants package powertrain control differently - verify by trim.
Connector notes: Honda PCM part number format 37820-xxx-xxx printed on a label on the unit; replacement PCM normally requires Honda re-flash/immobilizer registration.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Notes
- NEW for 2024 Civic: e:HEV Hybrid system adds separate High Voltage ECU. HDS iN HV programming required after replacement - separate from gas ECM procedure. Requires Honda iN HV authorization. MANDATORY: disable HV system via HDS service plug extraction protocol before any HV component access. Verify e:HEV system function via HDS post-programming. HV battery SOC and cell balance check via HDS after HV battery or HCU replacement.
CVT Control Unit (11th Gen gas models) Verify by VIN 2024-2026 1 record
Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, driver (left) side near the intake; the unit carries a Honda PCM part number beginning 37820 on a label.
Accessed from under the hood on the driver-side intake area; air intake/ducting and an electrical cover typically come off to reach the connectors. Hybrid (eHEV) and CVT/turbo variants package powertrain control differently - verify by trim.
Connector notes: Honda PCM part number format 37820-xxx-xxx printed on a label on the unit; replacement PCM normally requires Honda re-flash/immobilizer registration.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Notes
- Gas non-hybrid variants only. HDS CVT programming. Honda HCF-2 fluid. 50-100 mile adaptive relearn. e:HEV does not use CVT - uses e-CVT (planetary gear set).
TCM / Transmission
TCU - CVT Continuously Variable Verify by VIN 2022 28100-5CK
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 28100-5CK
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas RH850
- Notes
- New generation. Honda HDS or J2534 required. Honda HCF-2 CVT fluid. Enhanced security. TCM relearn via drive cycle. VIN coding mandatory.
TCU - CVT Continuously Variable Verify by VIN 2023-2024 28100-5CK
Documented for 2023-2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 28100-5CK
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas RH850
- Notes
- Honda HDS or J2534 required. Honda HCF-2 CVT fluid. Enhanced security. TCM relearn via drive cycle.
TCU - CVT Continuously Variable Verify by VIN 2025-2026 28100-5CK
Documented for 2025-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 28100-5CK
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas RH850
- Notes
- Honda HDS or J2534 required. Honda HCF-2 CVT fluid. Enhanced security. TCM relearn required.
BCM / Body electronics
BCM (Body Control Module - 11th Gen) Verify by VIN 2022 38800-T20-A01
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Driver (left) side under the dashboard, at or near the interior fuse/relay panel.
Reached by removing the driver-side lower dash trim and kick panel to expose the module near the cabin fuse box.
Connector notes: Controls lighting, locks, windows, wipers and immobilizer functions; a replacement BCM must be programmed/coded to the vehicle (dealer or qualified locksmith) or the car will not start.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- 38800-T20-A01
- Notes
- 11th Gen Civic BCM. HDS BCM programming + VIN/configuration data write after replacement. Controls body electrical: locks, lighting, windows, TPMS comms. Not interchangeable with 10th gen TGG BCM. Verify all body electrical functions operational after HDS programming.
Smart Entry Door Lock Actuator (Front) Verify by VIN 2022 72147-TGG-A11
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Driver (left) side under the dashboard, at or near the interior fuse/relay panel.
Reached by removing the driver-side lower dash trim and kick panel to expose the module near the cabin fuse box.
Connector notes: Controls lighting, locks, windows, wipers and immobilizer functions; a replacement BCM must be programmed/coded to the vehicle (dealer or qualified locksmith) or the car will not start.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- 72147-TGG-A11
- Notes
- Front door Smart Entry actuator - verify if 11th gen retains same part or uses T20 variant via HDS parts lookup. HDS body DTC clear after replacement. Verify Smart Entry proximity function operational.
Smart Key ECU (11th Gen) Verify by VIN 2022 ~35100-T20-A01
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Driver (left) side under the dashboard, at or near the interior fuse/relay panel.
Reached by removing the driver-side lower dash trim and kick panel to expose the module near the cabin fuse box.
Connector notes: Controls lighting, locks, windows, wipers and immobilizer functions; a replacement BCM must be programmed/coded to the vehicle (dealer or qualified locksmith) or the car will not start.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- ~35100-T20-A01
- Notes
- 11th Gen Keyless Access Control Unit. Honda iN authorization + HDS programming on replacement. All keys present required. Max 8 keys. Not interchangeable with 10th gen TGG Smart Entry ECU.
BCM (Body Control Module - 11th Gen) Verify by VIN 2023 38800-T20-A01
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Driver (left) side under the dashboard, at or near the interior fuse/relay panel.
Reached by removing the driver-side lower dash trim and kick panel to expose the module near the cabin fuse box.
Connector notes: Controls lighting, locks, windows, wipers and immobilizer functions; a replacement BCM must be programmed/coded to the vehicle (dealer or qualified locksmith) or the car will not start.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- 38800-T20-A01
- Notes
- HDS BCM programming + VIN/config write after replacement. Controls body electrical: locks, lighting, windows, TPMS comms.
Smart Key ECU (11th Gen) Verify by VIN 2023-2026 ~35100-T20-A01
Documented for 2023-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Driver (left) side under the dashboard, at or near the interior fuse/relay panel.
Reached by removing the driver-side lower dash trim and kick panel to expose the module near the cabin fuse box.
Connector notes: Controls lighting, locks, windows, wipers and immobilizer functions; a replacement BCM must be programmed/coded to the vehicle (dealer or qualified locksmith) or the car will not start.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- ~35100-T20-A01
- Notes
- Honda iN authorization + HDS on replacement. All KR5TP-4 keys present. Max 8 keys.
BCM (Body Control Module - 11th Gen) Verify by VIN 2024-2026 38800-T20-A01
Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Driver (left) side under the dashboard, at or near the interior fuse/relay panel.
Reached by removing the driver-side lower dash trim and kick panel to expose the module near the cabin fuse box.
Connector notes: Controls lighting, locks, windows, wipers and immobilizer functions; a replacement BCM must be programmed/coded to the vehicle (dealer or qualified locksmith) or the car will not start.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- 38800-T20-A01
- Notes
- HDS BCM programming + VIN/config write after replacement. Controls body electrical: locks, lighting, windows, TPMS comms. Same part across gas and e:HEV trims.
SRS / Airbag
SRS Control Unit 47 records
Under center console
Documented for 2022-2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-A980-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-A950-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-A970-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-H620-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-H630-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-H820-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-H830-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-K030-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-M820-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-P630-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-P810-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-P840-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-S430-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-W840-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-X060-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-X070-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T20-Z830-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T39-A910-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T56-A920-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T61-A920-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-TG7-A210-M2
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-30B-A751-M4
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2023-2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T47-A940-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2023-2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T47-A950-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2023-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T60-A920-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2023-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960-T64-A920-M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20P630M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20A970M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20P810M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20A950M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T61A920M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T56A920M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20H630M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T60A920M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20P840M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20S430M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20H620M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20H820M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T64A920M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20M820M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20X070M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20W840M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T39A910M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20Z830M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20X060M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20K030M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: On the floor of the passenger compartment, under the center console directly below the radio/center stack, bolted to the floor between the front seats.
Reached by removing center console trim and the lower center-stack panels to expose the floor-mounted unit; it is a small square module with two yellow connectors at the front.
Connector notes: Two yellow SRS connectors at the front face of the unit; year/trim wiring count may vary with side-airbag and pretensioner content.
Disconnect the battery first and wait 3 minutes for capacitors to discharge.
Airbag system components - professional service is strongly recommended. Never probe or handle an SRS module with the battery connected.
- Part number
- 77960T20H830M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
ABS / Brakes
VSA Modulator-Control Unit (11th Gen) 3 records
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, passenger side, mounted to receive hydraulic lines from the brake master cylinder (master cylinder is on the firewall, driver side).
Located in the engine compartment as a cube-shaped modulator with brake lines in and out; accessed from under the hood on the passenger side. Combined ABS pump and control unit.
Connector notes: Combined pump/modulator and electronic control unit; one electrical connector plus multiple brake hydraulic lines (typically 2 in, 4 out). 1.5L Touring uses VSA modulator PN around 57100-T20-xxx.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- 57110-T24-A01
- Notes
- 11th Gen Civic ABS/VSA HCU. After replacement: HDS motorized brake bleed procedure required - manual bleed alone is insufficient for VSA modulator. HDS ABS/VSA initialization + DTC clear. Verify firm pedal before road test. Road test 15+ mph. Not interchangeable with 10th gen TGH-315 modulator.
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, passenger side, mounted to receive hydraulic lines from the brake master cylinder (master cylinder is on the firewall, driver side).
Located in the engine compartment as a cube-shaped modulator with brake lines in and out; accessed from under the hood on the passenger side. Combined ABS pump and control unit.
Connector notes: Combined pump/modulator and electronic control unit; one electrical connector plus multiple brake hydraulic lines (typically 2 in, 4 out). 1.5L Touring uses VSA modulator PN around 57100-T20-xxx.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- 57110-T24-A01
- Notes
- HDS motorized brake bleed required after replacement - manual bleed insufficient. HDS ABS/VSA init + DTC clear. Firm pedal verify. Road test 15+ mph.
Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, passenger side, mounted to receive hydraulic lines from the brake master cylinder (master cylinder is on the firewall, driver side).
Located in the engine compartment as a cube-shaped modulator with brake lines in and out; accessed from under the hood on the passenger side. Combined ABS pump and control unit.
Connector notes: Combined pump/modulator and electronic control unit; one electrical connector plus multiple brake hydraulic lines (typically 2 in, 4 out). 1.5L Touring uses VSA modulator PN around 57100-T20-xxx.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Part number
- 57110-T24-A01
- Notes
- HDS motorized brake bleed required after replacement - manual bleed insufficient. HDS ABS/VSA init + DTC clear. Firm pedal verify. Road test 15+ mph. NOTE: e:HEV models use regenerative braking integration - verify regen braking function via HDS after VSA modulator work on e:HEV trims.
Wheel Speed Sensor - Front (each) 2 records
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, passenger side, mounted to receive hydraulic lines from the brake master cylinder (master cylinder is on the firewall, driver side).
Located in the engine compartment as a cube-shaped modulator with brake lines in and out; accessed from under the hood on the passenger side. Combined ABS pump and control unit.
Connector notes: Combined pump/modulator and electronic control unit; one electrical connector plus multiple brake hydraulic lines (typically 2 in, 4 out). 1.5L Touring uses VSA modulator PN around 57100-T20-xxx.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Notes
- Active magnetic type. HDS DTC clear + road test 15+ mph verify signal.
Documented for 2023-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, passenger side, mounted to receive hydraulic lines from the brake master cylinder (master cylinder is on the firewall, driver side).
Located in the engine compartment as a cube-shaped modulator with brake lines in and out; accessed from under the hood on the passenger side. Combined ABS pump and control unit.
Connector notes: Combined pump/modulator and electronic control unit; one electrical connector plus multiple brake hydraulic lines (typically 2 in, 4 out). 1.5L Touring uses VSA modulator PN around 57100-T20-xxx.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Notes
- Active magnetic. HDS DTC clear + road test 15+ mph verify.
Wheel Speed Sensor - Rear (each) 2 records
Documented for 2022, 2024-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, passenger side, mounted to receive hydraulic lines from the brake master cylinder (master cylinder is on the firewall, driver side).
Located in the engine compartment as a cube-shaped modulator with brake lines in and out; accessed from under the hood on the passenger side. Combined ABS pump and control unit.
Connector notes: Combined pump/modulator and electronic control unit; one electrical connector plus multiple brake hydraulic lines (typically 2 in, 4 out). 1.5L Touring uses VSA modulator PN around 57100-T20-xxx.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Notes
- Active magnetic. Same procedure as front. HDS DTC clear + road verify.
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Access
Located: Engine bay, passenger side, mounted to receive hydraulic lines from the brake master cylinder (master cylinder is on the firewall, driver side).
Located in the engine compartment as a cube-shaped modulator with brake lines in and out; accessed from under the hood on the passenger side. Combined ABS pump and control unit.
Connector notes: Combined pump/modulator and electronic control unit; one electrical connector plus multiple brake hydraulic lines (typically 2 in, 4 out). 1.5L Touring uses VSA modulator PN around 57100-T20-xxx.
Disconnect the battery first.
Verify before relying on this - secondary sources only.
- Notes
- Active magnetic. Same procedure as front.
Other modules
Instrument Panel Cluster (IPC) Bench clone required 78100-T20-A22, 78100-T39-A01
Module information indicates cloning or bench work.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025, 2026
Donor must match part family 78100-T20-A22 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 78100-T20-A22, 78100-T39-A01
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (cable reel 77900 family)
Connectivity / Accessories
Other 12 records
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Enhanced connected services. Remote functions, vehicle status via HondaLink app. Subscription required. 4G LTE telematics.
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Standard all trims. HDS camera ID registration if unit replaced. Verify correct image orientation in reverse.
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (SENSOR PER WHEEL - 315MHZ)
- Notes
- Direct TPMS. HDS sensor registration after replacement or position swap. Verify all 4 sensors via HDS TPMS function.
Documented for 2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 08V67-T20-110
- Notes
- Dealer-installed accessory for Sport+ trims. Rear bumper radar for BSM and RCTA. HDS Sensing 360 initialization after kit installation. Verify BSM indicator function in both mirrors.
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Remote functions, vehicle status via HondaLink app. Active subscription required.
Documented for 2023-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Standard all trims. HDS camera ID registration if replaced. Verify image orientation.
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (SENSOR PER WHEEL - 315MHZ)
- Notes
- Direct TPMS. HDS sensor registration after replacement or position swap. Verify all 4 via HDS.
Documented for 2023 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 08V67-T20-110
- Notes
- Dealer accessory BSM/RCTA kit. HDS Sensing 360 function verification after any rear bumper work on equipped vehicles.
Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Remote functions, vehicle status, e:HEV charge status (hybrid) via HondaLink app. Active subscription required.
Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (SENSOR PER WHEEL - 315MHZ)
- Notes
- Direct TPMS. HDS sensor registration after replacement or position swap. Verify all 4 sensors via HDS.
Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 08V67-T20-110
- Notes
- Dealer accessory BSM/RCTA. HDS Sensing 360 verification after rear bumper work on equipped trims. Applies to gas and e:HEV trims.
Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- 2024 Civic e:HEV only. Hybrid energy flow and EV range display via infotainment. Verify display functionality post-HV ECU programming. No separate hardware replacement - infotainment software driven.
Reference information for 2022-2026. Coverage can vary by year and equipment. Confirm the VIN and full part number before ordering a replacement.
Vehicle overview
- Vehicle
- Honda Civic
- Model years
- 2022-2026
- Generation
- 11th Gen FE
Tools we use for this vehicle
Factory scan, coding, and calibration access
Honda HDS / i-HDS / Honda Diagnostic Software
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Tool requirements
Basic OBD2 scanner
View capabilities and limitations
Supported work
- Read codes on SRS systems (47 documented rows)
- Read codes on ECU systems (10 documented rows)
- Read codes on BCM systems (6 documented rows)
- Read codes on TCU / TCM systems (3 documented rows)
- Read codes on ABS systems (7 documented rows)
- Read codes on IPC / SAS systems (2 documented rows)
- Read codes on Keys systems (6 documented rows)
- Read codes on Immobilizer systems (10 documented rows)
- Read codes on Accessory systems (12 documented rows)
Limitations
- IPC / SAS programming, coding, cloning, or security work (1 documented row)
Factory programming software (J2534)
View capabilities and limitations
Supported work
- Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Bench programmer
View capabilities and limitations
Supported work
- IPC / SAS bench clone rows (1 documented row)
Know this platform
This platform uses HS-CAN (500 kbps) + MS-CAN (125 kbps); OBD2 DLC Pin 6/14 HS-CAN; 11th gen topology; e:HEV adds HV-CAN network segment; DLC under driver dash with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN (500 kbps) + MS-CAN (125 kbps); OBD2 DLC Pin 6/14 HS-CAN; 11th gen topology; e:HEV adds HV-CAN network segment; DLC under driver dash
- OBD
- ISO 15765-4 CAN (500 kbps)
CAN architecture varies by year
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Officially supported (openpilot master)
- Package
- Honda Sensing
- Hardware
- Comma 3X + Honda Nidec / Bosch A / Bosch B harness
- Harness
- Honda Nidec / Bosch A / Bosch B Harness
2016-18 Nidec, 2019-21 Bosch A, 2022-24 Bosch B. Hatchback variants also supported.
Generation service summary for Honda Civic 11th Gen FE (2022-2026)
Generation coverage
This page consolidates Honda Civic service data for 2022-2026 across 5 model years; service information is available for 5 years.
Choose a yearADAS coverage
Merged ADAS coverage includes 12 system records, including Forward Camera (Monocular) (2022), Front Radar (Honda Sensing - 11th Gen) (2022), BSM Rear Bumper Radar (Honda Sensing 360 - dealer accessory) (2022), and Honda Sensing Suite (all trims - 11th Gen) (2022). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 32 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 87 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, and security-access planning for the Honda Civic 2022-2026 span, with exact-year validation before service. Mail-in module service is available nationwide.
Get a quoteDo I need calibration?
Windshield Replacement 3
2022
HDS 11th gen camera static calibration required (Honda Sensing now standard all trims on 2022). Camera: 36160-T20-A01. Use FE/FL-specific HDS procedure - target ~1.0m from front bumper on level surface. CRITICAL: do NOT use 10th gen TBG procedure on 11th gen. HDS iN (Honda interactive Network) required for 11th gen procedure. All Honda Sensing warning lamps must extinguish post-cal.
2023
HDS 11th gen FE camera static cal required (Honda Sensing standard all trims). Camera: 36160-T20-A01. ~1.0m target from front bumper, level surface. HDS iN procedure. Use FE/FL procedure only - NOT 10th gen TBG. All Sensing lamps must extinguish.
2024-2026
HDS 11th gen FE camera static cal required all trims (Honda Sensing standard). Camera: 36160-T20-A01. Target ~1.0m from front bumper, level surface. HDS iN procedure. Use FE/FL procedure ONLY - not 10th gen. All Sensing lamps must extinguish post-cal. Same procedure on e:HEV trim.
Forward Camera Replacement (11th Gen) 3
2022
HDS camera init + 11th gen FE static cal. Confirm part 36160-T20-A01. ~1.0m target, level surface. Do NOT use 10th gen procedure. Verify all Sensing functions DTC-free.
2023
HDS camera init + 11th gen FE static cal. ~1.0m target. HDS iN procedure. Verify all Sensing DTC-free.
2024-2026
HDS camera init + 11th gen FE static cal. ~1.0m target. HDS iN. Verify all Sensing DTC-free.
Front Radar Replacement (11th Gen) 2
2022
HDS 11th gen radar init + static cal. Pair with camera calibration. Level surface. Verify ACC/CMBS DTCs clear.
2023-2026
HDS 11th gen radar init + static cal. Pair with camera cal. Level surface. Verify ACC/CMBS DTCs clear.
BSM Rear Radar Installation / Replacement (08V67-T20-110) 1
2022
HDS Sensing 360 initialization after dealer accessory BSM radar kit installation. Fixed bracket mount - no physical aiming. Verify BSM and RCTA function via HDS DTC check. Verify warning indicators in both side mirrors.
VSA Modulator Replacement (57110-T24-A01) 3
2022
HDS motorized brake bleed sequence required - manual bleed alone insufficient. HDS ABS/VSA init + DTC clear. Firm pedal verify. Road test 15+ mph.
2023
HDS motorized brake bleed. ABS/VSA DTC clear. Firm pedal verify. Road test 15+ mph.
2024-2026
HDS motorized brake bleed. ABS/VSA DTC clear. Firm pedal verify. Road test 15+ mph. e:HEV: verify regen braking function via HDS post-replacement.
ECM Replacement (L15BE or K20C4) 2
2022
HDS flash + VIN + IMMO seed write + throttle init + idle learn. Use 11th gen engine-specific calibration file. L15BE: 37820-6A0-A76. K20C4: verify via HDS VIN lookup. Do not cross-apply 10th gen calibration files.
2023
HDS flash + VIN + IMMO seed + throttle init + idle learn. Engine-specific calibration file - verify via HDS VIN lookup. L15BE: 37820-6A0-A76.
Smart Key ECU Replacement 3
2022
Honda iN authorization required. All customer KR5TP-4 keys must be present. HDS 11th gen registration procedure. Max 8 keys.
2023
Honda iN authorization. All KR5TP-4 keys present. HDS 11th gen registration. Max 8 keys.
2024-2026
Honda iN authorization. All KR5TP-4 keys present. HDS 11th gen registration. Max 8 keys. Gas and e:HEV: same key registration procedure.
BCM (38800-T20-A01) Replacement 2
2022
HDS BCM programming + VIN/config write. Verify all body electrical operational. TPMS re-registration may be required.
2024-2026
HDS BCM programming + VIN/config write. Verify all body electrical functions. TPMS re-registration may be required.
SRS ECU Replacement 2
2022
HDS SRS initialization + DTC clear. Replace-only after hard deployment. 11th gen FE/FL is not subject to Takata recall.
2024-2026
HDS SRS initialization + DTC clear. Replace-only after hard deployment. 11th gen is not subject to Takata recall. e:HEV: disable HV before any SRS work in addition to standard battery disconnect procedure.
Any Front-End Collision 1
2022-2026
Yes
Inspect and recalibrate forward camera after any front-end collision using HDS.
Front Bumper Repair or Replacement 1
2022-2026
Yes
Forward radar angular alignment required after front bumper R&R. Use HDS.
Forward Radar Replacement 1
2022-2026
Yes
Radar module replacement requires alignment/calibration using HDS.
Rear Bumper Repair or Replacement 1
2022-2026
Yes
BSD radar alignment required after rear bumper R&R. Use HDS.
BSM Sensor Replacement 1
2022-2026
Yes
Blind spot monitoring sensor replacement requires calibration using HDS.
Mirror Replacement 1
2022-2026
Yes
Surround view mirror camera recalibration required after mirror R&R. Use HDS.
BSM Rear Radar Replacement (08V67-T20-110) 2
2023
HDS Sensing 360 radar initialization. Fixed bracket - no physical aiming. Verify BSM/RCTA DTCs clear and warning indicators functional.
2024-2026
HDS Sensing 360 init. Fixed bracket - no physical aiming. Verify BSM/RCTA DTCs clear and mirror warning indicators functional.
BCM Replacement 1
2023
HDS BCM programming + VIN/config write. Verify body electrical. TPMS re-registration may be required.
ECM Replacement (L15BE or K20C4 gas) 1
2024-2026
HDS flash + VIN + IMMO seed + throttle init + idle learn. Engine-specific calibration. L15BE: 37820-6A0-A76. K20C4: verify via HDS VIN lookup. Use 11th gen calibration files only.
HV ECU Replacement (e:HEV 2024 only) 1
2024-2026
MANDATORY: disable HV system via HDS service plug extraction before work. HDS iN HV programming authorization required. HV ECU programming via HDS HV-specific iN workflow - separate from standard ECM procedure. Verify e:HEV system function, HV battery SOC, and cell balance post-programming. Verify no HV or hybrid system DTCs. Test drive for hybrid system adaptive function.
ADAS calibration requirements
12 calibration requirements are documented for this generation.
9 static, 2 dynamic or drive-cycle, and 2 not-required rows. Verify exact equipment and repair event by VIN before setup.
Blind Spot Information Radar
Bumper - Rear
Systems: Blind Spot Warning, Lane Change Alert, Rear Cross Traffic Warning
Setup: Clear, Level Floor, OEM special tools, Scan Tool, Shop Built / Supplied Tools, Targets
Blind Spot Information Radar
Rear bumper
Systems: Blind Spot Warning, Rear Cross Traffic Warning
Trigger: R&R, R&I
Setup: Clear level floor, OEM special tools, Scan tool, Shop built or supplied tools, Targets
Heads Up Display Unit
Dashboard / instrument panel
Systems: Head-Up Display
Trigger: Calibration not required
LaneWatch Camera
Side Mirror(s)
Systems: Blind Spot Warning, Rear Cross Traffic Warning
Setup: Clear, Level Floor, OEM special tools, Shop Built / Supplied Tools, Targets, Vehicle Information Display
LaneWatch Camera
Side mirrors
Systems: LaneWatch, Blind Spot Warning
Trigger: R&R, R&I
Setup: Clear level floor, OEM special tools, Shop built or supplied tools, Targets, Vehicle information display
Multipurpose Camera Unit
Windshield area
Systems: Adaptive Cruise Control, Automatic Emergency Braking, Automatic High Beams, Forward Collision Warning, Lane Departure Warning, Lane Keeping Assistance, Traffic Sign Recognition
Trigger: R&R, R&I
Setup: Clear level floor, OEM special tools, Scan tool, Shop built or supplied tools, Targets, Vehicle information display, Clear, Level Floor, Shop Built / Supplied Tools
Parking and Back-Up Sensor Control Unit
Quarter Panel - Interior (Right)
Systems: Parking Collision Warning, Rear Cross Traffic Warning
Trigger: R&R, R&I
Setup: Scan tool
Parking and Back-Up Sensors
Bumper - Front and Rear
Systems: Parking Collision Warning
Setup: Scan Tool, Vehicle Information Display
Parking and Back-Up Sensors
Front and rear bumper
Systems: Parking Collision Warning
Trigger: R&R, R&I
Setup: Scan tool
Rearview Camera
Decklid / liftgate / tailgate
Systems: Backup Camera
Trigger: Calibration not required
Steering Angle Sensor
Steering Column
Systems: Adaptive Cruise Control, Indirect Driver Monitoring System, Lane Keeping Assistance
Steering Angle Sensor
Steering gear
Systems: Wheel Alignment ADAS dependency, Adaptive Cruise Control, Indirect Driver Monitoring System, Lane Keeping Assistance
Trigger: R&R, Wheel Alignment
Setup: Clear level floor, Scan tool, Clear, Level Floor
Year-by-year details
| Year | VIN split | Infotainment | Wireless CarPlay | Wireless Android Auto | Trim notes |
|---|---|---|---|---|---|
| 2022 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | Trims: LX, Sport, EX, EX-L, Touring, Si, Type R. Honda Sensing standard all trims (2022+). | ||
| 2023 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | 1 | 1 | Trims: LX, Sport, EX, EX-L, Touring, Si, Type R. Honda Sensing standard all trims (2022+). |
| 2024 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | 1 | 1 | Trims: LX, Sport, EX, EX-L, Touring, Si, Type R. Honda Sensing standard all trims (2022+). |
| 2025 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | 1 | 1 | Trims: LX, Sport, EX, EX-L, Touring, Si, Type R. Honda Sensing standard all trims (2022+). |
| 2026 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Honda Display Audio | 1 | 1 | Trims: LX, Sport, EX, EX-L, Touring, Si, Type R. Honda Sensing standard all trims (2022+). |
12 ADAS systems documented across the 2022-2026 generation. Rows that apply to only part of the generation carries a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Honda Sensing standard ALL trims: Collision Mitigation Braking System/Automatic Emergency Braking, Lane Keeping Assist System, LDWS, Adaptive Cruise Control with low-speed follow, Road Departure Mitigation. Honda Sensing 360 Blind Spot Monitoring (08V67-T20-110 dealer accessory) optional on Sport+ trims.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) 2022 | Camera | ADAS | Static | YES | 36160-T20-A01 | |
| Front Radar (Honda Sensing - 11th Gen) 2022 | Radar | ADAS | Static + Dynamic | YES | - | |
| BSM Rear Bumper Radar (Honda Sensing 360 - dealer accessory) 2022 | Radar | ADAS | Static + Dynamic | YES | 08V67-T20-110 | |
| Honda Sensing Suite (all trims - 11th Gen) 2022 | Software | ADAS | None | YES | (CAMERA 36160-T20-A01 | |
| Forward Camera (Monocular) 2023 | Camera | ADAS | Static | YES | 36160-T20-A01 | |
| Front Radar (Honda Sensing - 11th Gen) 2023 | Radar | ADAS | Static + Dynamic | YES | - | |
| BSM Rear Bumper Radar (Sensing 360 - dealer accessory) 2023 | Radar | ADAS | Static + Dynamic | YES | 08V67-T20-110 | |
| Honda Sensing Suite (all trims - 11th Gen) 2023 | Software | ADAS | None | YES | - | |
| Forward Camera (Monocular) 2024-2026 | Camera | ADAS | Static | YES | 36160-T20-A01 | |
| Front Radar (Honda Sensing - 11th Gen) 2024-2026 | Radar | ADAS | Static + Dynamic | YES | - | |
| BSM Rear Bumper Radar (Sensing 360 - dealer accessory) 2024-2026 | Radar | ADAS | Static + Dynamic | YES | 08V67-T20-110 | |
| Honda Sensing Suite (all trims - 11th Gen) 2024-2026 | Software | ADAS | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement 2022
HDS 11th gen camera static calibration required (Honda Sensing now standard all trims on 2022). Camera: 36160-T20-A01. Use FE/FL-specific HDS procedure - target ~1.0m from front bumper on level surface. CRITICAL: do NOT use 10th gen TBG procedure on 11th gen. HDS iN (Honda interactive Network) required for 11th gen procedure. All Honda Sensing warning lamps must extinguish post-cal.
Forward Camera Replacement (11th Gen) 2022
HDS camera init + 11th gen FE static cal. Confirm part 36160-T20-A01. ~1.0m target, level surface. Do NOT use 10th gen procedure. Verify all Sensing functions DTC-free.
Front Radar Replacement (11th Gen) 2022
HDS 11th gen radar init + static cal. Pair with camera calibration. Level surface. Verify ACC/CMBS DTCs clear.
BSM Rear Radar Installation / Replacement (08V67-T20-110) 2022
HDS Sensing 360 initialization after dealer accessory BSM radar kit installation. Fixed bracket mount - no physical aiming. Verify BSM and RCTA function via HDS DTC check. Verify warning indicators in both side mirrors.
VSA Modulator Replacement (57110-T24-A01) 2022
HDS motorized brake bleed sequence required - manual bleed alone insufficient. HDS ABS/VSA init + DTC clear. Firm pedal verify. Road test 15+ mph.
ECM Replacement (L15BE or K20C4) 2022
HDS flash + VIN + IMMO seed write + throttle init + idle learn. Use 11th gen engine-specific calibration file. L15BE: 37820-6A0-A76. K20C4: verify via HDS VIN lookup. Do not cross-apply 10th gen calibration files.
Smart Key ECU Replacement 2022
Honda iN authorization required. All customer KR5TP-4 keys must be present. HDS 11th gen registration procedure. Max 8 keys.
BCM (38800-T20-A01) Replacement 2022
HDS BCM programming + VIN/config write. Verify all body electrical operational. TPMS re-registration may be required.
SRS ECU Replacement 2022
HDS SRS initialization + DTC clear. Replace-only after hard deployment. 11th gen FE/FL is not subject to Takata recall.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using HDS.
Front Bumper Repair or Replacement
Forward radar angular alignment required after front bumper R&R. Use HDS.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using HDS.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use HDS.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using HDS.
Mirror Replacement
Surround view mirror camera recalibration required after mirror R&R. Use HDS.
Windshield Replacement 2023
HDS 11th gen FE camera static cal required (Honda Sensing standard all trims). Camera: 36160-T20-A01. ~1.0m target from front bumper, level surface. HDS iN procedure. Use FE/FL procedure only - NOT 10th gen TBG. All Sensing lamps must extinguish.
Forward Camera Replacement (11th Gen) 2023
HDS camera init + 11th gen FE static cal. ~1.0m target. HDS iN procedure. Verify all Sensing DTC-free.
Front Radar Replacement (11th Gen) 2023-2026
HDS 11th gen radar init + static cal. Pair with camera cal. Level surface. Verify ACC/CMBS DTCs clear.
BSM Rear Radar Replacement (08V67-T20-110) 2023
HDS Sensing 360 radar initialization. Fixed bracket - no physical aiming. Verify BSM/RCTA DTCs clear and warning indicators functional.
VSA Modulator Replacement (57110-T24-A01) 2023
HDS motorized brake bleed. ABS/VSA DTC clear. Firm pedal verify. Road test 15+ mph.
ECM Replacement (L15BE or K20C4) 2023
HDS flash + VIN + IMMO seed + throttle init + idle learn. Engine-specific calibration file - verify via HDS VIN lookup. L15BE: 37820-6A0-A76.
Smart Key ECU Replacement 2023
Honda iN authorization. All KR5TP-4 keys present. HDS 11th gen registration. Max 8 keys.
BCM Replacement 2023
HDS BCM programming + VIN/config write. Verify body electrical. TPMS re-registration may be required.
Windshield Replacement 2024-2026
HDS 11th gen FE camera static cal required all trims (Honda Sensing standard). Camera: 36160-T20-A01. Target ~1.0m from front bumper, level surface. HDS iN procedure. Use FE/FL procedure ONLY - not 10th gen. All Sensing lamps must extinguish post-cal. Same procedure on e:HEV trim.
Forward Camera Replacement (11th Gen) 2024-2026
HDS camera init + 11th gen FE static cal. ~1.0m target. HDS iN. Verify all Sensing DTC-free.
BSM Rear Radar Replacement (08V67-T20-110) 2024-2026
HDS Sensing 360 init. Fixed bracket - no physical aiming. Verify BSM/RCTA DTCs clear and mirror warning indicators functional.
VSA Modulator Replacement (57110-T24-A01) 2024-2026
HDS motorized brake bleed. ABS/VSA DTC clear. Firm pedal verify. Road test 15+ mph. e:HEV: verify regen braking function via HDS post-replacement.
ECM Replacement (L15BE or K20C4 gas) 2024-2026
HDS flash + VIN + IMMO seed + throttle init + idle learn. Engine-specific calibration. L15BE: 37820-6A0-A76. K20C4: verify via HDS VIN lookup. Use 11th gen calibration files only.
HV ECU Replacement (e:HEV 2024 only) 2024-2026
MANDATORY: disable HV system via HDS service plug extraction before work. HDS iN HV programming authorization required. HV ECU programming via HDS HV-specific iN workflow - separate from standard ECM procedure. Verify e:HEV system function, HV battery SOC, and cell balance post-programming. Verify no HV or hybrid system DTCs. Test drive for hybrid system adaptive function.
Smart Key ECU Replacement 2024-2026
Honda iN authorization. All KR5TP-4 keys present. HDS 11th gen registration. Max 8 keys. Gas and e:HEV: same key registration procedure.
BCM (38800-T20-A01) Replacement 2024-2026
HDS BCM programming + VIN/config write. Verify all body electrical functions. TPMS re-registration may be required.
SRS ECU Replacement 2024-2026
HDS SRS initialization + DTC clear. Replace-only after hard deployment. 11th gen is not subject to Takata recall. e:HEV: disable HV before any SRS work in addition to standard battery disconnect procedure.
Module part numbers by generation
52 full part numbers across 20 module groups for this generation.
Wheel Speed Sensors
-
47510T20A01 -
47510T20A01Rear speed sensor, right -
47560T20A01Rear speed sensor, left -
47560T20A01Right -
57450T20A01Front speed sensor, right -
57450T20A01Rear Speed Sensor, Left -
57455T20A01Front speed sensor, left -
57455T20A01Right
Collision Avoidance and Parking Assist Systems
-
39530T20A02Order By Vehicle Application., Lx -
39530T20A02Order By Vehicle Application., Sensor, Front -
39530T20A02Order By Vehicle Application., Si -
39530T20A02Order By Vehicle Application., Sport -
39530T20A02Order By Vehicle Application., Touring -
39670T20A07Camera, Rear, Ex -
39680TZAJ11YAOrder By Vehicle Application & Color., Red -
39680TZAJ11YBOrder By Vehicle Application & Color., White -
39680TZAJ11ZEOrder By Vehicle Application & Color. -
39680TZAJ11ZGOrder By Vehicle Application & Color., Sonic Gray -
39680TZAJ11ZHOrder By Vehicle Application & Color., Meteoroid Gray -
39680TZAJ11ZUOrder By Vehicle Application & Color., Sporty Blue -
39680TZAJ11ZXOrder By Vehicle Application & Color., Silver -
39680TZAJ11ZYOrder By Vehicle Application & Color., Mist Blue -
39680TZAN01ZAOrder By Vehicle Application & Color., Rear, Black
Multipurpose / Lane Camera
-
04361T20A00Windshield camera, EX application variant -
04361T20A10Windshield camera, Touring application variant -
04361T20A20Windshield camera, Sport application variant -
8S103T20AC0Windshield camera, LX application variant -
8S103T38AA0Windshield camera, Si application variant
Lane Departure System
-
04361T20A00Order By Vehicle Application., Lx -
04361T20A10Order By Vehicle Application. -
04361T20A20Order By Vehicle Application., Touring -
8S103T20AC0Order By Vehicle Application., Si -
8S103T38AA0Order By Vehicle Application., Sport
Body Control Module
-
38809T20A12LX application variant -
38809T20A12Order By Vehicle Application., Si -
38809T20A22Order By Vehicle Application., Sport -
38809T20A22Si application variant -
38809T20A32 -
38809T20A32Order By Vehicle Application., Control Module, Gateway -
38809T20A32Order By Vehicle Application., Lx -
38809T20A32Order By Vehicle Application., Touring -
38890T20AG2Order By Vehicle Application., Lx -
38890T20AH2Order By Vehicle Application. -
38890T20AL1Order By Vehicle Application., Touring -
38890T21AR1Order By Vehicle Application., Si -
38890T22AD1Order By Vehicle Application., Sport
Rear Vision Camera
-
39530T20A02Order By Vehicle Application. -
39530T20A02Order By Vehicle Application., Lx -
39530T20A02Order By Vehicle Application., Si -
39530T20A02Order By Vehicle Application., Sport -
39530T20A02Order By Vehicle Application., Touring -
39530T20A02
Engine Control Module
-
3782064AAC1 -
3782064AAC1EX or Touring 1.5T application variants -
3782064AAC1Lx -
3782064BAA1Si application variant -
3782064BAA1Sport -
3782064SAA1LX or Sport application variants -
3782064SAA1Si -
3782064SAA1Touring
Gateway Control Module
-
38890T20AG2EX gateway application variant -
38890T20AH2Touring gateway application variant -
38890T20AL1Sport gateway application variant -
38890T21AR1LX gateway application variant -
38890T22AD1Si gateway application variant
Instrument Cluster
-
35730T20A11Includes: Idle Stop & Park Brake Switch., Lx -
35730T20A11Includes: Idle Stop & Park Brake Switch., Si -
35730T20C11Includes: Idle Stop & Park Brake Switch., Instruments & Gauges, Instrument Cluster -
35730T20C11Includes: Idle Stop & Park Brake Switch., Touring -
35730T38C11Includes: Idle Stop & Park Brake Switch., Sport -
78100T20A24Order By Vehicle Application. -
78100T20A24Touring cluster application variant -
78100T21A24EX cluster application variant -
78100T21A24Order By Vehicle Application., Lx -
78100T21A64LX cluster application variant -
78100T21A64Order By Vehicle Application., Si -
78100T21A74Order By Vehicle Application., Touring -
78100T21A74Sport cluster application variant -
78100T39A02Order By Vehicle Application., Sport -
78100T39A02Si cluster application variant
Antenna Keyless Entry
-
38387TZ5A01
Keyless Entry Transmitter and Antenna
-
38387TZ5A01Keyless entry antenna -
72147T20A01LX or Si transmitter application variants -
72147T20A01Si -
72147T20A01Sport -
72147T20A11 -
72147T20A11EX, Sport, or Touring transmitter application variants -
72147T20A11Lx -
72147T20A11Touring
Parking Assist Control Module
-
39670T20A07
Parking Assist Distance Sensor
-
39680TZAJ11YAOrder By Vehicle Application & Color., Red -
39680TZAJ11YBOrder By Vehicle Application & Color., White -
39680TZAJ11ZEOrder By Vehicle Application & Color. -
39680TZAJ11ZGOrder By Vehicle Application & Color., Sonic Gray -
39680TZAJ11ZHOrder By Vehicle Application & Color., Meteoroid Gray -
39680TZAJ11ZUOrder By Vehicle Application & Color., Sporty Blue -
39680TZAJ11ZXOrder By Vehicle Application & Color., Silver -
39680TZAJ11ZYOrder By Vehicle Application & Color., Mist Blue -
39680TZAN01ZAOrder By Vehicle Application & Color., Rear, Black
Parking / Back-Up Control and Sensors
-
39670T20A07Parking aid control module -
39680TZAJ11YARear sensor, mist blue -
39680TZAJ11YBRear sensor, sporty blue -
39680TZAJ11ZERear sensor, white -
39680TZAJ11ZGRear sensor, silver -
39680TZAJ11ZHRear sensor, black -
39680TZAJ11ZURear sensor, sonic gray -
39680TZAJ11ZXRear sensor, red -
39680TZAJ11ZYRear sensor, meteoroid gray -
39680TZAN01ZAFront parking sensor
Rain Sensor
-
38970T20A02Wiper rain sensor
Rain Sensor
-
38970T20A02
SRS Impact Sensors and Clockspring
-
77900T20D21Clockspring / spiral cable air bag -
77930T20B12Front impact sensor, right -
77930T20B12Side Sensor, Front -
77930T20B22Front impact sensor, left -
77930T20B22Right -
77970TZRS11 -
77970TZRS11Rear -
77970TZRS11Side or rear impact sensor; verify location by VIN
Supplemental Restraint System Diagnostic Module
-
77960T20A98 -
77960T20A98
Clockspring Assembly Spiral Cable Air Bag
-
77900T20D21
CVT Transmission Control Module
-
2810065DA02LX application variant -
2810065DA02Order By Vehicle Application., Sport -
2810065DA12Order By Vehicle Application., Touring -
2810065DA12Sport application variant -
2810065HA02EX application variant -
2810065HA02Order By Vehicle Application., Lx -
2810065HA31Order By Vehicle Application. -
2810065HA31Touring application variant
ECU and TCU access paths by engine
Available access data covers 1 ECU or TCU family across 3 engine rows. Final service is still confirmed by VIN, module label, and installed software.
Shown access methods: OBD, BOOT.
EDC16C7
Bosch - ECU / PCM
View 3 engine records
EDC16C7
Bosch - ECU / PCM
-
2022-20262.2L i-CTDi (N22A2) - 140 PS - Diesel -
2022-20262.2L i-CTDi (N22A2) - 140 PS - Diesel -
2022-20262.2L i-CTDi (N22A2) - 140 PS - Diesel
16 gateway, immobilizer, and security items documented across the 2022-2026 generation.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Unibody - Advanced High-Strength Steel (AHSS), 11th Gen FE/FL architecture
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) + MS-CAN (125 kbps); OBD2 DLC Pin 6/14 HS-CAN; 11th gen topology; e:HEV adds HV-CAN network segment; DLC under driver dash
- Infotainment
- 7" Honda Infotainment (base); 9" Honda Infotainment Display Audio (EX+); Apple CarPlay + Android Auto standard; wireless connectivity on upper trims; e:HEV adds hybrid energy flow display
- OTA Capable
- No
- Infotainment Name
- Honda Display Audio
- Wireless CarPlay
- Yes
- Wireless Android Auto
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Available
Reviewed coverage: 2022-2026 - 1.5T (L15CA), 2.0L TYPE R (K20C1), 2.0T (K20C1), 2.0i Hybrid (LFC2), 2.2L i-CTDi (N22A2).
Confirm the exact engine, ECU, and any prerequisite access method before service.
Confirmation is limited to reviewed year/engine rows; other variants require confirmation.
WHAT WE RESOLVE
11th Gen FE (2022-2026) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Camera (Monocular) (2022), Front Radar (Honda Sensing - 11th Gen) (2022), BSM Rear Bumper Radar (Honda Sensing 360 - dealer accessory) (2022), and Honda Sensing Suite (all trims - 11th Gen) (2022). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve SRS Control Unit (2022-2024), SRS Control Unit (2022-2025), and SRS Control Unit (2022). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Honda Civic (2022-2026) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Honda Civic (2022-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Honda Civic (2022-2026)?
The Honda Civic (2022-2026) generation currently shows 73 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include SRS Control Unit (2022-2024), SRS Control Unit (2022-2025), and SRS Control Unit (2022). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 77960-T20-A980-M1 (2022-2024) - confirm for your exact year/VIN.
Does Honda Civic (2022-2026) need ADAS calibration after glass or collision work?
The merged generation data documents 12 ADAS systems, including Forward Camera (Monocular) (2022), Front Radar (Honda Sensing - 11th Gen) (2022), BSM Rear Bumper Radar (Honda Sensing 360 - dealer accessory) (2022), Honda Sensing Suite (all trims - 11th Gen) (2022), and Forward Camera (Monocular) (2023). Calibration triggers include Windshield Replacement (2022), Forward Camera Replacement (11th Gen) (2022), Front Radar Replacement (11th Gen) (2022), and BSM Rear Radar Installation / Replacement (08V67-T20-110) (2022). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Honda Civic (2022-2026)?
Yes. The generation data includes 47 SRS records, including SRS Control Unit (2022-2024), SRS Control Unit (2022-2025), and SRS Control Unit (2022). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 77960-T20-A980-M1 (2022-2024) - confirm for your exact year/VIN.
Do all Honda Civic (2022-2026) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2022-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
How long does service take for Honda Civic (2022-2026)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Is Honda Civic (2022-2026) service mobile or mail-in?
Mobile service covers DFW on-vehicle diagnostics, post-repair coding, and supported module work. Mail-in module service is available nationwide. We confirm the active path for your exact year, VIN, module, and requested scope before service.
More Civic generations
8th Gen FD/FA 2006-2011 9th Gen FB/FG 2012-2015 10th Gen FC 2016-2021 11th Gen FE 2022-2026 You are here
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
i-HDS Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.