Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2009 Dodge Charger Supported Services

2009 Dodge Charger

ADAS calibration, module programming, and security relearns

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Technical snapshot
  • Platform LX (1st Gen, 2005-2010)
  • CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
  • Security Chrysler SKREEM/RFHUB (SKIM - Sentry Key Immobilizer Module); Y164 or CY24 key blank with ID46 Philips transponder; PIN via wiTECH2 or StarScan; AKL requires wiTECH2 + security PIN + PCM/SKIM synchronization

What do you need fixed?

Choose a service to start your quote.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2009 Dodge Charger. On this vehicle we cover documented systems include Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning, this LX (1st Gen, 2005-2010) platform vehicle, WCM (Wireless Control Module) immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.

Platform
LX (1st Gen, 2005-2010)
Production
2006-2024
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES

VIN / Build Split

VIN pos 4-8 identifies model/engine/restraint. Dodge WMI: 2C3 (Dodge car), 1C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.

SERVICE SNAPSHOT

Exact-year service summary for 2009 Dodge Charger

Electronic systems coverage

This 2009 Dodge Charger page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.

View systems

Programmable modules

This page indexes 16 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and SAS coverage.

View modules

Gateway and security

This page includes 3 gateway, immobilizer, or key-security records for this 2009 Dodge Charger.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2009 Dodge Charger using the documented module data on this page.

Choose a section
EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Platform: LX (1st Gen, 2005-2010) - Confirmed

Driver-assist suite

No standard ADAS suite - pre-SafetyTec generation. Optional Forward Collision Warning, Blind Spot Monitoring, rear camera on upper trims; no standard Automatic Emergency Braking.

VIN and build split

VIN pos 4-8 identifies model/engine/restraint. Dodge WMI: 2C3 (Dodge car), 1C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.

Infotainment context

Uconnect / AM/FM stereo; CD player; Bluetooth (select trims); Aux input; SiriusXM

Network and access

CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Stellantis wiTECH 2.0

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2009 Dodge Charger. Counts reflect modules our techs have programmed or calibrated on this exact platform.

Need something not listed? Most undocumented modules can still be programmed.

Feature availability 1

Platform: LX (1st Gen, 2005-2010)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Dodge Charger issues we resolve on this platform: Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - LX (1st Gen, 2005-2010) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

No standard ADAS suite - pre-SafetyTec generation. Optional Forward Collision Warning, Blind Spot Monitoring, rear camera on upper trims; no standard Automatic Emergency Braking.

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Rear View CameraRear CameraCameraNone Conditional-
Blind Spot MonitoringRadarADASNone Conditional-
Forward Collision WarningCameraADASStatic Conditional-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

PCM/ECM Replacement

wiTECH2 SPS flash + SKREEM relearn required.

ABS Module Replacement

wiTECH2 ABS bleed + WSS relearn.

SRS Modules

Occupant Restraint Controller (ORC) PCBXZP812AA
Part number
PCBXZP812AA
Location
Under center console
Manufacturer
Continental
Notes
Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

ECU Modules

Engine Control Module (ECM/PCM) 05150246AD
Part number
05150246AD
Protocol / method
J2534
Coding required
Yes
Cloning supported
No
Notes
Same 05150246 hardware family covers 2009 Charger 2.7L/3.5L. Shared with Chrysler 300 and Challenger for this engine/year.
Engine Control Module (ECM/PCM) 05150246AD
Part number
05150246AD
Protocol / method
J2534
Coding required
Yes
Cloning supported
No
Notes
Same hardware base as 2.7L entry.
Engine Control Module (ECM/PCM) 05150397AE
Part number
05150397AE
Protocol / method
J2534
Coding required
Yes
Cloning supported
No
Notes
Shared with 2009 Challenger R/T, Chrysler 300C, and Magnum R/T. Hardware PN 05150397AE; 21 firmware revisions including 68004308 and 68061220-68061229.
Engine Control Module (ECM/PCM) 05150310AC
Part number
05150310AC
Protocol / method
J2534
Coding required
Yes
Cloning supported
No

BCM Modules

BCM (Body Control Module)
Notes
FCA/Stellantis BCM. wiTECH2/StarSCAN SPS programming + SKREEM relearn required.

TCU / TCM Transmission Modules

TCU - NAG1 5-Speed Auto (W5A580) P05150
Part number
P05150
Protocol / method
J2534
Coding required
Yes
Cloning supported
Yes
Chip / MCU
Bosch TC1797
Notes
Requires VIN programming, TCM relearn via StarSCAN/wiTECH, ATF+4 fluid spec, throttle position relearn required
TCU - 545RFE 5-Speed Auto P05150
Part number
P05150
Protocol / method
J2534
Coding required
Yes
Cloning supported
Yes
Chip / MCU
Bosch TC1797
Notes
Requires VIN programming, TCM relearn via StarSCAN/wiTECH, ATF+4 fluid spec, shift adaptation reset needed

ABS / Brake Modules

ABS/ESC Module (CAB - Controller Antilock Brake)
Notes
FCA ABS CAB. wiTECH2 brake system test + WSS relearn.
Wheel Speed Sensor - Front (each)
Notes
Replace if DTC C1014/C1015 set.
Wheel Speed Sensor - Rear (each)
Notes
Replace if DTC C1016/C1017 set.

Other Modules (IPC, SAS)

Steering Angle Sensor (SAS)
Coding required
Yes
Notes
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
cross-year extension)

Connectivity & Accessories

Uconnect 8.4 / 4C NAV Head Unit ~68314100 (VERIFY VIA DEALERCONNECT)
Part number
~68314100 (VERIFY VIA DEALERCONNECT)
Notes
wiTECH setup and VIN coding. Apple CarPlay/Android Auto.
Instrument Cluster (Performance / Standard) ~68314200 (VERIFY VIA DEALERCONNECT)
Part number
~68314200 (VERIFY VIA DEALERCONNECT)
Notes
wiTECH VIN coding. Mileage stored in cluster.
SRT Performance Data Recorder (PDR - SRT / Hellcat) ~68314300 (VERIFY VIA DEALERCONNECT)
Part number
~68314300 (VERIFY VIA DEALERCONNECT)
Notes
Available on SRT/Hellcat equipped vehicles. Records vehicle performance data and video. wiTECH setup after replacement. Verify SD card and camera function post-installation.
ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
Unibody - High-Strength Steel; RWD
OBD Protocol
ISO 15765-4 CAN (500 kbps)
CAN Architecture
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Infotainment
Uconnect / AM/FM stereo; CD player; Bluetooth (select trims); Aux input; SiriusXM
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed
Reviewed coverage: 2009 - 6.1L Hemi V8 SRT-8 (ESF).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2009 Dodge Charger?

ADAS calibration pricing for a 2009 Dodge Charger depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2009 Dodge Charger?

Yes. The 2009 Dodge Charger uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: PCBXZP812AA. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2009 Dodge Charger?

After windshield replacement on a 2009 Dodge Charger, Rear View Camera and Forward Collision Warning rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.

How long does a 2009 Dodge Charger module service take?

Most 2009 Dodge Charger onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 16 programmable modules documented in our database (4 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.

Do you cover the 2009 Dodge Charger on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2009 Dodge Charger. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2009 Dodge Charger programming?

Every programming, cloning, and calibration job on the 2009 Dodge Charger is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Which modules on a 2009 Dodge Charger can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2009 Dodge Charger. For this vehicle our database documents:

  • 4 engine control (ECU/PCM)
  • 2 transmission control (TCU/TCM)
  • 1 body control (BCM and related)
  • 3 ABS / brake control (EBCM)
  • 1 immobilizer / security
  • 2 key & fob
  • 2 steering angle sensor (SAS)
  • 3 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2009 Dodge Charger covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ECU / PCM Part Numbers
05150246AD, 05150397AE, 05150310AC
TCU / TCM Part Numbers
P05150
SRS / Airbag Module Part Numbers
PCBXZP812AA
Transmission Control Module (TCM) Part Numbers
P05150

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

(945) 382-4065

Shared module fitment

Vehicles sharing modules with the 2009 Dodge Charger

These vehicles use one or more of the same replacement modules indexed for this vehicle.

Finish the repair

Need help finishing this repair?

Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.