VIN / Build Split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1G1 (Chevy car), 1GC (Chevy truck), 3GN (Chevy SUV). Position 8 = engine code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2010 Chevrolet Malibu Supported Services
2010 Chevrolet Malibu
ADAS calibration, module programming, and security relearns
Standard trim configurations for 2010 Chevrolet Malibu; verify trim-specific options before ordering modules.
Technical snapshot
- Platform Epsilon I (8th Gen, 2008-2012)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security GM PASSKey III+ (BCM security seed, transponder required); B111 or B102 key blank with resistor pellet; PIN via GDS2/MDI2 Tech 2; AKL requires BCM security seed relearn via GDS2 + PIN code
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2010 Chevrolet Malibu. On this vehicle we cover documented systems include Rear View Camera and Forward Collision Warning, this Epsilon I (8th Gen, 2008-2012) platform vehicle, PK3/PK3+ / PEPS immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
Epsilon I (8th Gen, 2008-2012)
Production
2008-2024
Trim Levels
Standard trim configurations for 2010 Chevrolet Malibu; verify trim-specific options before ordering modules.
Drivetrain
FWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES
Exact-year service summary for 2010 Chevrolet Malibu
Electronic systems coverage
This 2010 Chevrolet Malibu page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systemsProgrammable modules
This page indexes 17 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 9 gateway, immobilizer, or key-security records for this 2010 Chevrolet Malibu.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2010 Chevrolet Malibu using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Immobilizer: PK3/PK3+ / PEPS - Standard; Platform: Epsilon I (8th Gen, 2008-2012) - Confirmed
Driver-assist suite
No standard ADAS suite - pre-Safety Assist generation. Optional Forward Collision Alert and Lane Departure Warning on upper trims.
VIN and build split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1G1 (Chevy car), 1GC (Chevy truck), 3GN (Chevy SUV). Position 8 = engine code. Position 10 = model year code.
Infotainment context
Chevrolet MyLink (7" touchscreen); OnStar; Bluetooth; USB/Aux
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
GM GDS2 / GM Tech2Win / GM MDI 2
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2010 Chevrolet Malibu. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
1 module documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
6 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
3 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
3 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
Feature availability 2
Immobilizer: PK3/PK3+ / PEPS
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: Epsilon I (8th Gen, 2008-2012)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Chevrolet Malibu issues we resolve on this platform: Rear View Camera and Forward Collision Warning recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Epsilon I (8th Gen, 2008-2012) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - PK3/PK3+ / PEPS immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No standard ADAS suite - pre-Safety Assist generation. Optional Forward Collision Alert and Lane Departure Warning on upper trims.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Rear Camera | Camera | None | YES | - | |
| Forward Collision Warning | Camera | ADAS | Static | Conditional | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
PCM Replacement
GDS2 SPS calibration download + PASSLOCK relearn.
EBCM Replacement
GDS2 ABS automated bleed + WSS relearn.
SRS MODULES
SRS Modules
Sensing & Diagnostic Module (SDM) 25971256
- PART
- 25971256
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Sensing & Diagnostic Module (SDM) 15821097
- PART
- 15821097
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Sensing & Diagnostic Module (SDM) 15821098
- PART
- 15821098
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
ECU MODULES
ECU Modules
PCM - 2.4L Ecotec LE9 I4 / 2.5L LKW I4 (2013+) / 3.6L LLT V6
- NOTES
- Chevy Malibu PCM. GDS2 SPS calibration.
BCM MODULES
BCM Modules
BCM (Body Control Module)
- NOTES
- GM BCM. GDS2/MDI2 SPS programming + PASSLOCK/PASSKEY relearn.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 6T70 6-Speed Auto 24256865
- PART
- 24256865
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC1797
- NOTES
- Requires SPS programming and transmission adaptive learn procedure. Use DEXRON-VI ATF. TCM learns shift patterns automatically after 50+ drive cycles.
TCU - 4T45E 4-Speed Auto 24256866
- PART
- 24256866
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC1797
- NOTES
- SPS programming required. Transmission relearn via Tech 2 or MDI. Use DEXRON-VI ATF. Clear DTCs after programming.
ABS / BRAKE MODULES
ABS / Brake Modules
EBCM (Electronic Brake Control Module)
- NOTES
- GM EBCM. GDS2 automated bleed procedure + WSS relearn.
Wheel Speed Sensor - Front (each)
- NOTES
- Replace if DTC C0035/C0040 set.
Wheel Speed Sensor - Rear (each)
- NOTES
- Replace if DTC C0045/C0050 set.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 20883021
- PART
- 20883021
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 20883022
- PART
- 20883022
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Chevy MyLink 8-inch 23434 (APPROX)
- PART
- 23434 (APPROX)
- NOTES
- Wireless CarPlay RS/Premier. GDS2 init. Final MY.
IPC (Instrument Panel Cluster)
- NOTES
- GDS2 + SPS VIN programming.
Power Steering Control Module (PSCM)
- NOTES
- SPS + steering angle calibration.
GATEWAY / SECURITY MODULES
Gateway / Security Modules
Central Gateway Module
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3585
- NOTES
- Compatibility label: Chevrolet. Air conditioning Notes: Read/Write
Central Gateway Module
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3558
- NOTES
- Compatibility label: Buick. BCM Notes: Read/Write
Central Gateway Module
- MFG
- Various / Unlisted
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- 1M12S
- NOTES
- Compatibility label: CRUZE. BCM Notes: Years: 2015-
Central Gateway Module
- MFG
- Various / Unlisted
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- 1M12S
- NOTES
- Compatibility label: Cavalier. BCM Notes: Years: 2015-
Central Gateway Module
- MFG
- Various / Unlisted
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- 1M12S
- NOTES
- Compatibility label: Excelle. BCM Notes: Years: 2015-
Central Gateway Module
- MFG
- Various / Unlisted
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- 1M12S
- NOTES
- Compatibility label: SAIL. BCM Notes: Years: 2015-
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System PK3/PK3+ / PEPS
- Add Key Yes
- All Keys Lost Yes
GM PASSKey III+ (BCM security seed, transponder required); B111 or B102 key blank with resistor pellet; PIN via GDS2/MDI2 Tech 2; AKL requires BCM security seed relearn via GDS2 + PIN code
IMMOBILIZER MODULES
Immobilizer Modules
BCM (PASS-Key III+ database)
- NOTES
- GM PASSKEY III+ in BCM. GDS2 password reset for AKL. Seed/key algorithm via GDS2 IMMO function.
KEY & FOB TYPES
Key & Fob Types
GM PASSKEY III+ Transponder Key
- NOTES
- Resistor + transponder. GDS2 or Tech 2 programming. AKL via security seed.
GM Remote Key Fob (RKE)
- NOTES
- 315MHz. Program via GDS2 or 10x lock/unlock cycle for basic fobs.
Replacement Notes
PK3/PK3+ / PEPS system. SPS/ACDelco TDS required for key programming and module replacement. Security pin required; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- High-strength steel unibody; FWD
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Chevrolet MyLink (7" touchscreen); OnStar; Bluetooth; USB/Aux
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2010 - 2.4L EcoTec professional bench programming tool 16v (LE9), 2.4L EcoTec II 16v (LE5), 2.4L EcoTec MHEV (LAT), 3.5L V6 12v (LZ4), 3.6L V6 24v (LY7).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2010 Chevrolet Malibu?
ADAS calibration pricing for a 2010 Chevrolet Malibu depends on which of its 2 documented systems need work after a repair. This vehicle is documented with Rear View Camera and Forward Collision Warning. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2010 Chevrolet Malibu?
Yes. The 2010 Chevrolet Malibu uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 25971256. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2010 Chevrolet Malibu?
After windshield replacement on a 2010 Chevrolet Malibu, Rear View Camera and Forward Collision Warning rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2010 Chevrolet Malibu module service take?
Most 2010 Chevrolet Malibu onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 21 programmable modules documented in our database (1 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2010 Chevrolet Malibu on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2010 Chevrolet Malibu. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2010 Chevrolet Malibu programming?
Every programming, cloning, and calibration job on the 2010 Chevrolet Malibu is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2010 Chevrolet Malibu with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2010 Chevrolet Malibu. Immobilizer generation on this platform: PK3/PK3+ / PEPS. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2010 Chevrolet Malibu can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2010 Chevrolet Malibu. For this vehicle our database documents:
- 1 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 2 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
OTHER CHEVROLET MODELS
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2010 Chevrolet Malibu covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 12626158, 12626159
- BCM / Body Module Part Numbers
- 20868419, 20868420
- TCU / TCM Part Numbers
- 24256865, 24256866
- SRS / Airbag Module Part Numbers
- 25971256, 15821097, 15821098
- ABS / EBCM Part Numbers
- 20902975, 20902976
- Instrument Cluster (IPC) Part Numbers
- 20883021, 20883022
- Transmission Control Module (TCM) Part Numbers
- 24256865, 24256866
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2010 Chevrolet Malibu
These vehicles use one or more of the same replacement modules indexed for this vehicle.