Expert ADAS calibration, module programming, and diagnostic recovery for the 2009 Chevrolet Malibu. On this vehicle we cover documented systems include Rear View Camera and Forward Collision Warning, this Epsilon I (8th Gen, 2008-2012) platform vehicle, PK3/PK3+ / PEPS immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
Epsilon I (8th Gen, 2008-2012)
Production
2008-2024
Trim Levels
Standard trim configurations for 2009 Chevrolet Malibu; verify trim-specific options before ordering modules.
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2009 Chevrolet Malibu using the documented module data on this page.
Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: Epsilon I (8th Gen, 2008-2012)
Confirmed
Verify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Chevrolet Malibu issues we resolve on this platform: Rear View Camera and Forward Collision Warning recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Epsilon I (8th Gen, 2008-2012) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - PK3/PK3+ / PEPS immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No standard ADAS suite - pre-Safety Assist generation. Optional Forward Collision Alert and Lane Departure Warning on upper trims.
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Sensing & Diagnostic Module (SDM)15821097
PART
15821097
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Sensing & Diagnostic Module (SDM)15821098
PART
15821098
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
ECU MODULES
ECU Modules
Engine Control Module (ECM) - 2.4L LE5 I4 (E37)12612397
PART
12612397
PROTOCOL
J2534
CODING
Yes
CLONE
No
Engine Control Module (ECM) - 3.5L LZ4 V612612397
PART
12612397
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
12612397 covers 3.5L and 3.5L professional bench programming tool for 2009 Malibu per GMPartsGiant; 12625455 also listed for 3.5L/3.5L professional bench programming tool on same page as alternate PN.
Engine Control Module (ECM) - 3.6L LY7 V612678511
PART
12678511
PROTOCOL
J2534
CODING
Yes
CLONE
No
Engine Control Module (ECM) - 2.4L LAT I4 eAssist Hybrid12678511
Chevrolet AM/FM stereo; CD player; OnStar; Bluetooth (select trims); Aux input
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed Reviewed coverage: 2009 - 2.4L EcoTec professional bench programming tool 16v (LE9), 2.4L EcoTec II 16v (LE5), 2.4L EcoTec MHEV (LAT), 3.5L V6 12v (LZ4), 3.6L V6 24v (LY7). Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2009 Chevrolet Malibu?
ADAS calibration pricing for a 2009 Chevrolet Malibu depends on which of its 2 documented systems need work after a repair. This vehicle is documented with Rear View Camera and Forward Collision Warning. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2009 Chevrolet Malibu?
Yes. The 2009 Chevrolet Malibu uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 25971256. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2009 Chevrolet Malibu?
After windshield replacement on a 2009 Chevrolet Malibu, Rear View Camera and Forward Collision Warning rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2009 Chevrolet Malibu module service take?
Most 2009 Chevrolet Malibu onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 22 programmable modules documented in our database (4 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2009 Chevrolet Malibu on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2009 Chevrolet Malibu. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2009 Chevrolet Malibu programming?
Every programming, cloning, and calibration job on the 2009 Chevrolet Malibu is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2009 Chevrolet Malibu with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2009 Chevrolet Malibu. Immobilizer generation on this platform: PK3/PK3+ / PEPS. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2009 Chevrolet Malibu can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2009 Chevrolet Malibu. For this vehicle our database documents:
4 engine control (ECU/PCM)
2 transmission control (TCU/TCM)
1 body control (BCM and related)
3 ABS / brake control (EBCM)
1 immobilizer / security
2 key & fob
2 steering angle sensor (SAS)
2 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2009 Chevrolet Malibu covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
ECU / PCM Part Numbers
12612397, 12678511
TCU / TCM Part Numbers
24256853, 24256854
SRS / Airbag Module Part Numbers
25971256, 15821097, 15821098
Transmission Control Module (TCM) Part Numbers
24256853, 24256854
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.